I bought a few of these similar kits before I landed on the one from Anson at weeknd garage. Outstanding customer service, answered any questions I had during the installation. Highly recommend it
So far I finished installing all LEDs off of the master controller and I AM LOVING IT! I'll be tackling the door LEDs some other day when I have time. Question... is master controller connected to slave controllers wirelessly???
@WeekndGarage that's awesome and didn't expect that. I was dreading the idea of running wires to all 4 doors. Sorry to bother you with questions... how do I change the color of zone 2 for foot well, drink holders and door latches with switch?
How is the quality and brightness of this kit? Has anyone on here bought and installed this? Seems like a great price for everything it comes with and does.
We’re confident you will be happy with the kit as it looks even better in person. Feel free to email us at info@weekndgarage.com if you have any questions and we can share more photos and details😁
Kewl video and have this in my "cart". I watched the entire video but missed the part where you add the manual adjustment switch under the display. Is there a video that shows how you set this up? Also, what does the app look like? Would be great to include the app and how to use it.
Thank you, the hardwired button is installed out of sight but reachable by hand under the trailer brake section. Can send you detailed photos if you email us at weekndgarage@gmail.com!
Hey, I have a question about your video on ambient light installation. Most of the other videos I've seen show people tapping into a fuse in the fuse box to power the host controller, but you just wrapped the power wire with the fuse. Is that safe, or is the hardwiring method using a tap-in fuse safer? Also, what would happen if the host draws too much power and blows up the existing car fuse?
@@javedmath1015 Hi there, it makes no difference in terms of safety with a fuse tap. Aesthetically it may look cleaner. In this electrical circuit we are describing at F65 fuse which is a 10 amp fuse, since the power draw of our system is minimal and under 2amps. It is not possible to draw enough power to trip the 10amp fuse unless there was a short in that case would trip any fuse larger than the smallest gauge wire behind this fuse it’s protecting. We have our dash cam front rear, star headliner and the interior ambient lighting wired to this 10amp fuse and it has never tripped in 4+ years of running the truck. If the factory fuse was to trip from short circuiting or overcurrent, then you would replace it with another correct size fuse as the fuse has done its job of protecting the circuit in front of it. You can investigate if it’s a short causing the fuse to trip or an over current prior to replacing the fuse to prevent another similar event. Feel free to email us at info@weekndgarage.com if you’d like to discuss further and review electrical diagrams
Looking to buy just got 1 question: in case I get stuck and have questions is the email support available to answer question on the weekends? I work during the week so I will most likely do this on a weekend. Hope to hear from you. Thanks
Hello DannyB, we’re here to help anytime. Send us an email at weekndgarage@gmail.com if you have any questions and we can support you during your install even on Weeknd’s!
Do these work on any 5th gen rams like the rebel? And also does my vehicle had to have a previous package in my vehicle to make these ambient lights work?
Yep it’s designed for the 5th gen ram. Demo vehicle is a Rebel, no packages or options are required as this is a standalone kit that is plug and play with no cutting, drilling or splicing wire is required. Feel free to email us at WEEKNDGARAGE@gmail.com if you have any questions and we will help you out!
What is needed to add for the voice box and small light detection to install and make them work?. The voice box is for the music sync or for voice command?.
2 questions I have a 22 gt, does the console slide back the same with shifter being in middle console And what if you have the stock lighting on the door handles already What do you do with those?
Installs exactly the same with the TRX/GT consoles. We recommend to remove the dim factory lighting, it won’t be visible after you install ours anyways as it washes out the dim oem lighting. Feel free to contact us at weekndgarage@gmail.com if you have any questions
@WeekndGarage there was no option for that I would of bought that also. To make it complete. Also there is 2 diferent types of door light a d I ordered the 3. Also one more question I have bighorn with plain door panels and the strip sticks out a little is that normal? I just setup and started to open I will continue tomorrow
Hi, link is provided to your email ordered on file, we haven’t received any emails from you, please make sure it’s sent to the correct address! Weekndgarage@gmail.com
Sure you could if you want, it makes no difference in terms of protection because if you run a fuse tap it’s still behind the factory 10amp fuse. Having 2 inline 10amp in series within 1 inch of each other adds zero value in terms of protection
Hi there, it depends where you’re located. Generally pretty quick within North America as we’re located on the west coast. Feel free to email us at WEEKNDGARAGE@gmail.com if you have any questions
Hello @boboscar99 if you would like information on how to add that portion you could email us at weekndgarage@gmail.com and we will help you get sorted!
![Hunxho - Ball Forever [Official Video]](http://i.ytimg.com/vi/nki9ZTF9Uls/mqdefault.jpg)
I bought a few of these similar kits before I landed on the one from Anson at weeknd garage. Outstanding customer service, answered any questions I had during the installation. Highly recommend it
Thank you for the kind words!
@@WeekndGarage I placed an order yesterday under Enrique but I have not received an email confirmation, can you check on your end that you got it
@@enriqueangulo3828 Please send us an email at weekndgarage@gmail.com and we will get you sorted!
@@enriqueangulo3828they said it’s out of stock and eta is 3 months
Awesome guide you've given me the confident to finally do this.
You can do it!
I bought this 3 months ago from you and it’s still working well 👍🏻👍🏻 looking forward to other mods for the ram limited
Good to hear! Stay tuned
This looks awesome! Do your kits work on a 2025 Limited 1500?
Looks even better in person! It sure does work with the 25 limited. Feel free to reach out to at info@weekndgarage.com if you have any questions
So far I finished installing all LEDs off of the master controller and I AM LOVING IT! I'll be tackling the door LEDs some other day when I have time. Question... is master controller connected to slave controllers wirelessly???
Good to hear! The controllers are linked wirelessly. Feel free to email us at weekndgarage@gmail.com if you need any help!
@WeekndGarage that's awesome and didn't expect that. I was dreading the idea of running wires to all 4 doors. Sorry to bother you with questions... how do I change the color of zone 2 for foot well, drink holders and door latches with switch?
Do you make a kit or know of one available for a full fit for 24 Chevy Colorado ZR2 can’t seem to find a strip that is 6’ long for 1 strip dash.
Please email us at info@weekndgarage.com and we will get you sorted!
How is the quality and brightness of this kit? Has anyone on here bought and installed this? Seems like a great price for everything it comes with and does.
We’re confident you will be happy with the kit as it looks even better in person. Feel free to email us at info@weekndgarage.com if you have any questions and we can share more photos and details😁
Do you sell the starlight kit for the roof
@@TheRobstr yes we do, please check out our website or contact us info@weekndgarage.com
When are you releasing the app for uconnect 5 ?
Kewl video and have this in my "cart". I watched the entire video but missed the part where you add the manual adjustment switch under the display. Is there a video that shows how you set this up? Also, what does the app look like? Would be great to include the app and how to use it.
Thank you, the hardwired button is installed out of sight but reachable by hand under the trailer brake section. Can send you detailed photos if you email us at weekndgarage@gmail.com!
@@WeekndGarage Sweet. Sending e-mail now. Thanks for your prompt response!!
What’s wiring colors for the passenger door. My colors are different. 2021 ram 1500 big horn alpine crew cab.
@@waataaa2608 Please send us an email at weekndgarage@gmail.com and we will help you out!
Do you have videos for other vehicles? I'd like to see it on a 2024 GMC Sierra 1500 AT4
Please send us an email at weekndgarage@gmail.com and we will get you sorted!
@@WeekndGarageemailed a few days ago but I haven't heard back. Thanks.
@@chrismorales9481 Replied 😄
Hey, I have a question about your video on ambient light installation. Most of the other videos I've seen show people tapping into a fuse in the fuse box to power the host controller, but you just wrapped the power wire with the fuse. Is that safe, or is the hardwiring method using a tap-in fuse safer?
Also, what would happen if the host draws too much power and blows up the existing car fuse?
@@javedmath1015 Hi there, it makes no difference in terms of safety with a fuse tap. Aesthetically it may look cleaner.
In this electrical circuit we are describing at F65 fuse which is a 10 amp fuse, since the power draw of our system is minimal and under 2amps. It is not possible to draw enough power to trip the 10amp fuse unless there was a short in that case would trip any fuse larger than the smallest gauge wire behind this fuse it’s protecting.
We have our dash cam front rear, star headliner and the interior ambient lighting wired to this 10amp fuse and it has never tripped in 4+ years of running the truck.
If the factory fuse was to trip from short circuiting or overcurrent, then you would replace it with another correct size fuse as the fuse has done its job of protecting the circuit in front of it. You can investigate if it’s a short causing the fuse to trip or an over current prior to replacing the fuse to prevent another similar event.
Feel free to email us at info@weekndgarage.com if you’d like to discuss further and review electrical diagrams
@@WeekndGarage Thank you so much for your reply. I have understand everything now.
can you do a video for bmw e90? Or do you already have pictures of this build or even a video of it?
Best regards
Not on an E90 at the moment, possibly in the future!
Have you ran into with the back doors having different power wire colors?
On your video the - and + are on opposite sides my
orange/purple are on the same side as the black wire
@@adamevans5562 We've seen it happen on some trims and years. Email us at Info@weekndgarage.com and we will get you sorted!
Looking to buy just got 1 question: in case I get stuck and have questions is the email support available to answer question on the weekends? I work during the week so I will most likely do this on a weekend. Hope to hear from you. Thanks
Hello DannyB, we’re here to help anytime. Send us an email at weekndgarage@gmail.com if you have any questions and we can support you during your install even on Weeknd’s!
Just placed an order, can’t wait for it to arrive! I saw a Star Headliner Kit on the website. Do you have a video on how to install that in a Ram?
Thank you! Reach out to us on email at weekndgarage@gmail.com and we can help you out with the star headliner as well
Do these work on any 5th gen rams like the rebel? And also does my vehicle had to have a previous package in my vehicle to make these ambient lights work?
Yep it’s designed for the 5th gen ram. Demo vehicle is a Rebel, no packages or options are required as this is a standalone kit that is plug and play with no cutting, drilling or splicing wire is required.
Feel free to email us at WEEKNDGARAGE@gmail.com if you have any questions and we will help you out!
I just purchased a 2022 rebel gt will this product be compatible being that it has the center shifter?
Yep, demo vehicle is a Rebel as well. Would fit your GT perfectly.
What is needed to add for the voice box and small light detection to install and make them work?. The voice box is for the music sync or for voice command?.
That’s work in progress, not much interest in those functions so haven’t spent time developing the little gimmicks as opposed to the whole system 😄
@@WeekndGaragestart working on it because i’m buying this kit soon!
Do you think I could tweak this & make it doable for my ram 2013 bighorn ?
Please send us an email at weekndgarage@gmail.com and we will help you out!
Look good 👍🏻👏🏼 excellent explanation
Thank you!
2 questions
I have a 22 gt, does the console slide back the same with shifter being in middle console
And what if you have the stock lighting on the door handles already
What do you do with those?
Installs exactly the same with the TRX/GT consoles. We recommend to remove the dim factory lighting, it won’t be visible after you install ours anyways as it washes out the dim oem lighting.
Feel free to contact us at weekndgarage@gmail.com if you have any questions
Just install the kit in my 2019 rebel ..the rear doors don't work..
What am I missing?
Hi There, please email us at info@weekndgarage.com and we will help you get the rear doors going :)
Will this kit work for a 2018 2500 mega cab ....its the previous gen interior
Please send us at email at weekndgarage@gmail.com and we will get you sorted!
Will this work in a 3rd gen ram 1500 a 2005 to be exact ?
Can you do this on a 2021-24 Yukon Denali?
Please email us at weekndgarage@gmail.com and we will get you sorted!
There is one longer plug that says zone1 short led what's that for?
@@pkontoslight That’s a spare for customers that want to add an additional light on the left side of the dash
@WeekndGarage there was no option for that I would of bought that also. To make it complete. Also there is 2 diferent types of door light a d I ordered the 3. Also one more question I have bighorn with plain door panels and the strip sticks out a little is that normal? I just setup and started to open I will continue tomorrow
It’s available to order on our website!
Email us at weekndgarage@gmail.com with your order details and we will get you sorted
do you have a kit for 4thGEN RAMs???
Please email us at weekndgarage@gmail.com and we can better assist you!
Do you make this kit for a 4th Gen RAM?
does this kit work on a 5th gen ram 1500 quadcab with a bench seat rather than center console
2022
Yep you just won’t install the center console strips, email us at weekendgarage@gmail.com if you have any other questions!
Would these work on 2500 HD or just the 1500?
HD is wired differently, send us an email at weekndgarage@gmail.com and we will get you sorted!
Is this universal and can fit other trucks? Thanks.
Please send us an email at weekndgarage@gmail.com and we can get you sorted!
I just installed this and didnt get a bluetooth app code or link. Also where did you hook up the switch to. Ive emailed and havent heard back.
Hi, link is provided to your email ordered on file, we haven’t received any emails from you, please make sure it’s sent to the correct address!
Weekndgarage@gmail.com
Ok I will try to email again. Ive just resent the email the the one youve provided.
Do you offer a kit for a 2015 Ram 1500 express?
Is it possible to order a new main harness?
Yep please send us an email at weekndgarage@gmail.com and we will get you sorted!
Very nice! I’m Getting a used 2021 Ram 1500 Limited and when it’s bought I’ll go to your website to buy the lighting.
@@iCenturify Thank you! Feel free to reach out if you have any questions!
Weekndgarage@gmail.com
@@WeekndGarage No Problem!
Where can I buy those lights?
@@larafagard check out our website!
WWW.WEEKNDGARAGE.COM
Thanks
@@larafagard Anytime!
Would this kit work in a 2018 Charger?
Yep please email us at weekndgarage@gmail.com and we can better assist you!
This works on 2024 limited trim?
Yep, would fit perfectly in your 24 limited
I ordered this. Should be here in a day or 2. Excited to install
Do you have some for ram 1500 2014?
Please email us at weekndgarage@gmail.com and we will get you sorted!
What’s the name of the phone app to control the kit??
Send us an email and we will get you sorted! Weekndgarage@gmail.com
Can’t you just add a fuse tap instead of wrapping wire around it and piggyback the fuse off the tap ?
Sure you could if you want, it makes no difference in terms of protection because if you run a fuse tap it’s still behind the factory 10amp fuse.
Having 2 inline 10amp in series within 1 inch of each other adds zero value in terms of protection
Definitely want to add a fuse tap if that fuse blows, depending on which side of the fuse, you wrap your wire around, you’ll still have power
what app does this use?
@@primafitnessnutrition8971 app is included with purchase. Feel free to reach out at weekndgarage@gmail.com if you have any questions :)
Does it void the warranty?
No it doesn’t void warranty, it does not permanently alter any existing equipment and the whole kit can be removed in under 15 minutes!
Anyone know how long shipping takes
Hi there, it depends where you’re located. Generally pretty quick within North America as we’re located on the west coast. Feel free to email us at WEEKNDGARAGE@gmail.com if you have any questions
Man!! What a nice setup!! I just sent a email with some info, hope to hear from your soon. Thanks!
Thank you Mr Night Shade :)
I didn't see how you got it over the left side of the steering above the headlight roll switch
Hello @boboscar99 if you would like information on how to add that portion you could email us at weekndgarage@gmail.com and we will help you get sorted!
@@WeekndGaragecan you dime the lights or they are fixed
@@enriqueangulo3828 You can dim it from 1-100% via the hardwired buttons or phone application.
Your email isn’t recognized by Gmail. Looking for a kit for a 2024 KIA Carnival/KA4.
What is the name of this kit?
Hi Timothy, did you send it to weekndgarage@gmail.com?
@@WeekndGarage yes. I tried to and the email addresses wasn’t recognized but now it is. Must’ve been a glitch.
We just tested it, it’s working. Our Weeknd is spelt without an E, perhaps a spelling error on entry?
Do you have a company phone number to be able to contact as your email seems to not be the best way to reach you?
La Ramie 💀
La amy
LGBTQA+ proud 🏳️🌈💕
...
Will these work in a 2015 kia optima?
Does the kit fit the Ram Diesel Limited 2021 2500
Please email us at weekndgarage@gmail.com and we will get you sorted!