Lol thank You! Hey so I have a problem with the package I waa going to send. It'll cost me about $250 to send it to you which is crazy! Lol .can I send you a $50 Amazon or eBay card? Or to your PayPal?
I was thinking the same, but it'll come to a hault soon since the only parts I don't have yet are the really expensive parts. Over 1k for cam shafts, over 1k for intake manifold..never really had a finish date in mind. I'm in no rush since I haven't bought a car yet . I just want to finish it so I can admire it every day 😂👍
So on a new time chain kit... There are yellow chain links on the smaller chain.. Does that specific smaller oil pump chain have to be lined up with anything? And if so how?
Ok I didnt see any of the 4 pistons . Your going to have to rip that off and do this vid over again. I need to get one of them meow torque wrenches . That six sec. clip was something else :) Your quite delusional and fit right in with everyone else 👍
Hey bro,i got a question. Im planning to do the same.but im confused wish timing chain do i need to use for my k20/k24a2.i have a stock rsx type s 2005 k20z1. Thanks for your help and knowledge. Keep it up with your built.waiting for that first crank.
I thought about packing it but if 4P shipped it like that and no where in the instructions it says to pack it so I didn't. It'll be cranked over before starting to ensure oil pressure
@@themechanic6117 can i ask you a question. my friend installed a 4piston h22 oil pump on a h23 block and he is getting no oil pressure. we tried packing it with vaseline and still nothing shoots up to the head when he turns the car over. Any ideas?
Any of the k24 bolts the same and will work? I forgot to ship out my bolts with a pump I sent out 😬 I forgot if the k24 ones worked, im trying to avoid him from buying new bolts...any suggestions? Thanks
@@themechanic6117 i finally found out all the bolt sizes, guess the two 12mm on the k20pump are the same as the k24 where they bolt up too, i couldn't remember if I used them on my block and I did. As for the 10mm still haven't found out yet but im sure there is one located on the k24 or hopefully he has a spare match. But thanks anyways, ya they come with new bolts hopefully they didn't account for that in the price because you can reuse them, they are nothing like head bolts where you would have to replace them indefinitely as far as I know.
You'll have to tap threads so whatever threads you tap, that's what type of bolt you use . Check out this old video I made about that bolt for oil pressure ruclips.net/video/DXxsJAgZXSI/видео.html
Nice man thanks for taking time to strip the pump down nice to see what you pay for
Your videos are helping me out so much I feel like I should pay you! Lol
Lol that's why there's a link to my paypal/patreon 👍. Glad I could help
The mech a nic I would if the k wast taking all my money 😂
I hear you. Mine is a endless money pit! 😑😂
Mission accomplished ! Hahaha, edits were great !!
Lol! Thank you 👍😂
Great job! Hilarious pinching your daughters nail file again 😂 I need one of those torque wrench lol too cute!!
Lol thank You! Hey so I have a problem with the package I waa going to send. It'll cost me about $250 to send it to you which is crazy! Lol .can I send you a $50 Amazon or eBay card? Or to your PayPal?
$250?!!! 😳😳😳 That's insane! Lol I'm only across the pond, not in outer space 😂 How about just the test light? It's been on my wish list 😉
Bro 😂😭😂😂 the beginning caught me off guard
😁👍
I would replace it since you're there but I have no hands on experience with that situation so take it for what it's worth
I ordered A new part to replace it 👍
Very good video helped alot
You're welcome
Hi bro just asking if you put oil pump chain so need to make timing
LOL THIS GUY IM SO GETTING ONE FROM A JUNKYARD ACURA FOR MY BUDGET BUILD
No problem with that 👍
🤣🤣🤣🤣🤣 meow 💪🔥 ur editing is great
Thank you 😆👍
@@themechanic6117 anytime bro 💪😄
From the looks of it... you're ahead of schedule on getting this to running phase. What was the initial timeline?
I was thinking the same, but it'll come to a hault soon since the only parts I don't have yet are the really expensive parts. Over 1k for cam shafts, over 1k for intake manifold..never really had a finish date in mind. I'm in no rush since I haven't bought a car yet . I just want to finish it so I can admire it every day 😂👍
So on a new time chain kit... There are yellow chain links on the smaller chain.. Does that specific smaller oil pump chain have to be lined up with anything? And if so how?
Using a k20 oil pump theres nothing to line up. You can just install the chain
@@themechanic6117 OK thank you!
What size is the Allen key I have 3 whole set and they all wobble
My girl looks at me like that’s not real lmfao
😁👍
Ok I didnt see any of the 4 pistons . Your going to have to rip that off and do this vid over again. I need to get one of them meow torque wrenches . That six sec. clip was something else :) Your quite delusional and fit right in with everyone else 👍
Sorry to disappoint Steve! 😂 the meow mix torque wrench makes me laugh every time I watch it 😂👍
Good video. Can this conversion work on a K24Z2 block?
I really want to replace my stock oil pump....makes alot of noise on cold start.
Are you sure it's the pump?
Hey bro,i got a question. Im planning to do the same.but im confused wish timing chain do i need to use for my k20/k24a2.i have a stock rsx type s 2005 k20z1. Thanks for your help and knowledge. Keep it up with your built.waiting for that first crank.
I believe if you use a k24 block you have to use a k24 timing chain, the oil pump chain I installed in this video is from a k20
@@themechanic6117 ,thanks bro..im getting some ideas from your videos..keep it up✌👍
Thanks for watching 👍💪
Which you had show how you install the bolt for block the oil pressure
Look through my engine build videos . I have a video on that. It's old n crappy but it's there
would you need to prime the oil pump? packing it with vaseline to aid it with priming?
I thought about packing it but if 4P shipped it like that and no where in the instructions it says to pack it so I didn't. It'll be cranked over before starting to ensure oil pressure
@@themechanic6117 can i ask you a question. my friend installed a 4piston h22 oil pump on a h23 block and he is getting no oil pressure. we tried packing it with vaseline and still nothing shoots up to the head when he turns the car over. Any ideas?
Any of the k24 bolts the same and will work? I forgot to ship out my bolts with a pump I sent out 😬 I forgot if the k24 ones worked, im trying to avoid him from buying new bolts...any suggestions? Thanks
I think the k24 and k20 oil pumps use different bolts . When I bought the 4piston oil pump it came with new bolts
@@themechanic6117 i finally found out all the bolt sizes, guess the two 12mm on the k20pump are the same as the k24 where they bolt up too, i couldn't remember if I used them on my block and I did. As for the 10mm still haven't found out yet but im sure there is one located on the k24 or hopefully he has a spare match. But thanks anyways, ya they come with new bolts hopefully they didn't account for that in the price because you can reuse them, they are nothing like head bolts where you would have to replace them indefinitely as far as I know.
Any alignment on that chain?
No. There's no balance shaft on it so nothing to align
What size was the bolt you use to block the oil hole
Oh ok
12
Was your channel down? Could not find any of your vids for awhile
No it been up n running. Its weird that you couldn't find my vids
The mech a nic found them again...👍🏿im happy.. 😬have a great week👍🏿
The mech a nic oh I had some on my watch later list and they disappeared.. Started looking.. channel gone..
@@ptolalibertad thats crazy. Idk why that happened. Hit the sub button to not lose it again lol
The mech a nic 👍🏿
The bolt you have to use to plug the hole what size is it?
You'll have to tap threads so whatever threads you tap, that's what type of bolt you use .
Check out this old video I made about that bolt for oil pressure
ruclips.net/video/DXxsJAgZXSI/видео.html
Hey brother nice upgrade 👌 . Just curious how many hp could u get with this modds..
8.10 the metal behind plastic is thinner from vid
Proper!
Good video , The music is weak
Free music is weak music.
Any thoughts on how to test a k20a oil pump?
Test it for what? I really dont know of a way to test it
Measure the clearances
Thats about as close to testing as youll get
The mech a nic lol not
Much advice I know but usually my “test” is buying a new one 😂
@@PolishedMobileDetailing503 what clearances are you alking about? Tf
Wtf is up with that extra shit.. Lmao was that supposed to be a cat? 🐈
Yes, some cat sounds . Don't take it too serious
First!
😂meow
Stop with the cat noises, please 🤮
Some people find it funny , some don't... Sorry for the inconvenience
Miiiiooooow !🐱