Thermaltake Versa H18 Gaming PC BuildLog
HTML-код
- Опубликовано: 11 сен 2024
- Thermaltake Versa H18 Gaming PC BuildLog
Case from : www.msy.com.au...
Another Computer Build Log.
Specs:
Intel i7-4770s
16Gb DDR3
120Gb SSD
500gbb HDD
GTX1050ti 4GB GPU
👀 Instagram - / localtechexperts
📖 Facebook - / lteperth
🌐 Service Website: www.perthteche...
🌐 Sales Website: www.gamingstat...
I have this case but it gets ver dusty on the front grill
Yeah probably one of my least favorite cases.. I don't build into these anymore. There are just better options out there for not a lot more cost.
@@localtechexpertswhat are some better option?
Where do you I install the led cable
This build doesn't have an led cable. Though when I do install them I usually put them up along the Inside top lip. You want to hide the LEDs and just have the ambient light showing really.
sorry for late comment, apparently it doesnt have a front dust panel, however the mesh front seems to have pretty small holes.
is it enough for dust to not build up inside? in other words is the inside of the case dusty?
Yeah dust buildup mostly depends on its location and the fan configuration.. Honestly this case has been the least favorite to build into.... Definitely would recommend saving a few extra bucks and going for something else. I have had alot of luck with the Jonsbo D31 for MATX builds.
Which are the dimension? I see they differ from Thermaltake page to Amazon.
Oh sorry this one sold so I can't measure. It's pretty standard matx mini towers size though.
idk how to put the front fans in...
You pull the front panel off and screw the fans in from the front
bro how to dismantle front? i dont know even if i use manual
i need to dismantle three fan
With a lot of these cases the front is held on with plastic pegs. They just pull off with a little force. Can take a bit of practice but just pull it forward from the bottom.
nice video journal. music is pretty nifty too!
Cheers yeah. Think il do them like this from now on. Couple things to work on namely audio levels and video quality. Im pretty washed out at the start.
@@localtechexperts still, it's pretty informative and that's the real point.
How did you install the second hard drive? SATA? I can't figure out how to do it.
The 3.5 inch drive sits in the bottom of the case near the power supply and is screwed in from the underside.
What hard drive is that?
the SSD? its a sandisk 120gb
With the versa H18 case and a H100i AIO from Corsair, do you think a 3 fan GPU like a 6700 xt or 6800 xt would still fit?
That would be a squeeze so I doubt it. Would be more inclined to put a 120mm rad on the rear exhaust to leave clearance for long gpus.
@@localtechexperts Thank you for the quick reply 🙏🏻 I already have the H100i, is there any way to confirm fitment? I would buy a 2 fan 6700 xt but none are available local to me.
@@Thc_555 so looking at clearance measurements would be the way to go. Says VGA length limitation: 350mm(Without Front Fan) so minus the thickness of the h100 and see if the gpu will be that length.
i have the frostflow x with the rx 5700xt thicc III and it barely fits it only has 1 inch to spare in between
Can a rtx 3060 fit into this case?
I think that should be ok.. Most RTX3060ti s are dual fan and quite short I believe.
@@localtechexpertsyes
@@localtechexpertsI have this case and I am wondering where that cable that says led goes
Will a 360 aio fit the Versa H18?
No I am afraid not.. The product spec page says a 280 max at either top or front.. Though I would be skeptical putting it at the top as I am pretty sure it would collide with any VRM heatsinks the Mobo may have. Also putting a radiator at the front limits the GPU length you can fit too.
@@localtechexperts I thought because (3) 120mm fans fit a radiator would as well.
@@allensmith6430 I don't think there is thick enough clearance on the psu cut out on the bottom for the radiator and fans. If that makes sense? Check the case specs here www.thermaltake.com.au/versa-h18.html
@@localtechexperts "Check the case specs here" Wow!
Not sure what to tell you man.. Wont fit sorry as confirmed from manufacturer website. I actually think its more likely the piping at the top wont clear as a 360mm radiator is more like 365-370mm with the piping.