I just checked and it was 1820 Australian dollars for the hardware (rails, ballscrews, spindle steppers, screws etc) kit from Three Design. Grbl controller was another 175, stepper drivers maybe 100 (I had them from my plasma build). Bunch of 3D printed stuff which I printed myself (400 for the printer but I had that before). I can't remember how much the steel was, maybe 4-500 or so. All together probably around 3000AUD or 2000USD and 5-6 days for building it all
Hope you had a good Christmas and New Year and that all is well, nice to see you back after a little while.
Thanks, you too!
You did a fantastic job !
@@charlesdelajoux4951 Thanks!
Belo trabalho!
Acompanhando aqui do Brasil.
Thanks!
Very nice build. Im wondering if i can build a spindle plate so i can use a plasma cutter too. Hmmm. .. something to think about.
Great job!
Can I ask what tube diamentions did you use, because I will try build it.
Nice build mate. Can I ask what motion controller you used?
I am using grblHAL and iosender
Is that motorbike, between S90 and 245, future project?
No, thats actually fixed but just not registered
Can you share how much did it cost you to make this brother
I just checked and it was 1820 Australian dollars for the hardware (rails, ballscrews, spindle steppers, screws etc) kit from Three Design. Grbl controller was another 175, stepper drivers maybe 100 (I had them from my plasma build). Bunch of 3D printed stuff which I printed myself (400 for the printer but I had that before). I can't remember how much the steel was, maybe 4-500 or so. All together probably around 3000AUD or 2000USD and 5-6 days for building it all
Which cnc controller board did you use ?
@@fabog3732 FlexiHAL