How to replace a washing machine door lock | Washing Machine Spares & Parts | 0800 0149 636

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 71

  • @johnlees8186
    @johnlees8186 6 месяцев назад +1

    Yeah Baby!!! Shoestring door trick followed by lock and handle replacement. Plenty of credit in the bank with the Mrs, off to play golf tomorrow. Brilliantly clear video. Thank you.

  • @malcdow5870
    @malcdow5870 4 года назад +8

    This vid tutorial is brilliant. The door lock had disappeared inside the machine. I thought the only way to get to it would be some major exercise, removing the front of the machine... or something horrible.
    Because of Covid19 Lockdown, to get a repair person was just not possible, and anyway would have been an £80 call out, then the work time, probably a part or whatever. So it sat broken for a month... more.
    Then I found this vid, and fifteen minutes later everything was fixed. Brilliant. 10/10 and will be sharing this site. many thanks etc %-)

  • @davidross3879
    @davidross3879 8 лет назад +3

    cheers mate just fixed my door lock , did ask someone to come out and have a look at it, told me £20 to come out and after watching your video it took me 5 minutes to fix the job, many thanks

  • @annasharratt200
    @annasharratt200 9 лет назад +3

    Thank you so much!!!
    We run an B&B and our washing machine door just jammed. The string method saved our bacon!!!
    Thanks James

  • @WS-1
    @WS-1 4 года назад +6

    Very helpful , particularly as it illustrates the scenario where the interlock mechanism is not fixed to the machine body by screws .

  • @shakeyvideo
    @shakeyvideo 5 лет назад +3

    thanks my interlock had fell in to the machine so watching you helped me put it back

  • @tazzatamania
    @tazzatamania 4 года назад +4

    Used this video to change my broken interlock on a Candy washing machine, dead easy. Mine has a plastic wire holding the door seal on but you just pull at it where the join is. I didn't pull all of the door seal off, just enough to get the job done and it made putting it back in place very easy. The plastic band is just a ratchet like a cable tie and make sure it's all pushed in to place then close the ratchet and tighten. I work in an office and always have and I found it easy and saved a nice bit of money too. Thanks

    • @lynseywareing7115
      @lynseywareing7115 3 года назад +2

      Thanks for this tip just replaced my door lock on a candy and used your tip took less than 10 minutes and cost a lot less than the call out charge the repair people wanted

  • @darrenbeebe
    @darrenbeebe 11 месяцев назад

    Thanks for this video. I have just followed this exactly to change the lock over. Saved me over $100 Aussie dollars at least. 😊

  • @armanx2
    @armanx2 6 лет назад +7

    Thx so much man :) i just fixed for first time in life a washing machine. It was harder though you made it look easy :D

  • @ziakhan7444
    @ziakhan7444 2 года назад +1

    Brilliant I just had the hoover washing machine door problem I used string and it's work well done. God bless you

  • @joynwachukwu647
    @joynwachukwu647 5 месяцев назад

    Thank you, your advice helps me to open my locked machine door today.

  • @olafvdh2662
    @olafvdh2662 Год назад

    IT WORKED!!! With the knife. Thank you so much.

  • @michaelpage1267
    @michaelpage1267 7 лет назад +2

    i love your heavy breathing when you concentrate james xx

  • @darkestserenity6775
    @darkestserenity6775 Год назад

    thanks for this vid
    my interlock system has slipped out of place and now I know how to fix it

  • @jasonjohnson8487
    @jasonjohnson8487 2 года назад

    Thank you for this video but this just helped me pit the module I've been waiting for which was delayed. I put it in seconds, my wife will be over the moon now its fixed Thank you 😊

  • @ashvinmehta7841
    @ashvinmehta7841 7 лет назад +1

    Got my w/m opened after seeing the instruction. Thanks.

  • @khagendrasingaklimbu7910
    @khagendrasingaklimbu7910 Год назад

    Thank you. I was able to fix dropped door lock.

  • @hakmanp.8702
    @hakmanp.8702 3 года назад

    dude you're the best

  • @AminaMustafa-ls5se
    @AminaMustafa-ls5se 4 месяца назад

    Thank you Brother ❤❤❤❤❤❤❤

  • @spelyamable
    @spelyamable 2 года назад

    perfect video bro ! keep this work up

  • @abuabdullahkazi6241
    @abuabdullahkazi6241 5 лет назад +2

    Best ever explainer. Keep up.
    Thanks a lot.

  • @11mave
    @11mave 10 лет назад +2

    great, great, great. It helps a lot. I am very thankful.

  • @Sumbalsalah
    @Sumbalsalah 4 месяца назад

    Hi there, i am just following your video. How shell i put back the green plastic where does it connects? Please reply as i am currently fixing it.

  • @eddiegriffin780
    @eddiegriffin780 5 лет назад +1

    Thank you for this video. Our combo Splendid 6200 wont open. do you know common failure that causes it? Many thanks!

  • @kayleighjones4010
    @kayleighjones4010 9 лет назад +9

    Omg I could kiss you...Thank you so much uve saved me a few penny's. .who would off thought a bit off string could open the door☺

  • @dannyblack6498
    @dannyblack6498 Год назад

    Thank you so much 👏👍

  • @glodivina
    @glodivina 7 лет назад +1

    I brought a new washer door lock assembly and latch because the washer would fill up with water, but the door would not lock causing the washer not to work. After replacing the switch on the door and the latch the door still not wanting to lock, any ideas? I've already tested the switch and it's fine. Help please I have a Frigidaire Affinity front loader washer.

  • @garyseddon2132
    @garyseddon2132 9 лет назад +2

    great vid, very informative

  • @mickeyfishingtv606
    @mickeyfishingtv606 2 года назад

    Nice tutorial, Can you share a link where to buy the interlock mechanism?

  • @hotpointbrownlover3365
    @hotpointbrownlover3365 2 года назад +1

    this video will work on some ariston washers and hotpoint ariston washers

  • @sonalijadhav3726
    @sonalijadhav3726 5 лет назад +1

    I solved locked door problem by pressing the door inside instead of opening it (towards lock position) after end signals for 15-20 seconds & later door opened easily

  • @paloweb1
    @paloweb1 7 лет назад

    Hi I have a Hoover WMH 168 D the door shuts on it fine , but doesn't lock at all. The time even counts down when you start a progam but no water fills the machine, do you think this is a door problem. many thanks for the video

  • @FighterPilot1945
    @FighterPilot1945 10 лет назад +1

    thank you so much i could not figure how to get the ????? interlock switch out on my bosch washing machine because it has no screws just 2 plastic indent pins your tutorial showed me how to get the switch out thanks again....jon

  • @amarieiflorin3386
    @amarieiflorin3386 Год назад

    De un real folos. Mulțumesc

  • @Caumtsis
    @Caumtsis 9 лет назад +1

    I got a question How come my washer got water leak from bottom when i washing my clothes?

  • @zahraejerhaf9320
    @zahraejerhaf9320 2 месяца назад

    Many thanks

  • @2078endar
    @2078endar 3 года назад +1

    Great explained , very helpfull

  • @allisonbedford4574
    @allisonbedford4574 Год назад

    You didn't show how to fix door handle, cos the replacement comes in parts and wanted to know how to put back together. Have my door in parts , will have to try again tmoz and watch other videos .

  • @hotpointbrownlover3365
    @hotpointbrownlover3365 2 года назад +1

    make great use for the splendide 2200xcd

  • @charliecharliecharliecharl8554
    @charliecharliecharliecharl8554 11 месяцев назад

    Was helpful

  • @SHORTS19730
    @SHORTS19730 4 года назад

    Thanks GR8 help👍🏾

  • @jevgenijsdormidontovs7773
    @jevgenijsdormidontovs7773 6 лет назад +1

    top man👍👍

  • @TamertonChocolates
    @TamertonChocolates 7 месяцев назад

    You know you can just take two screws out and lift the top cover off right? You can then reach the door lock and either push the latch with a screwdriver if the handle is broken and you cant open the door or take the lock off that way. You don't need to remove the rubber drum seal at all.

  • @MissLikeChips
    @MissLikeChips Год назад

    Thank you

  • @Karlmountney1
    @Karlmountney1 9 лет назад

    What is that green cable. I can't seem to find where it clips into

    • @darranbrown6507
      @darranbrown6507 7 лет назад

      karl m it's the door lock manual over ride.. the square bit of it goes over a little Lever piece on the door lock assy then runs down the machine to behind the kick plate. (I'm a UK white goods engineer)

  • @minettequintanilla9677
    @minettequintanilla9677 2 года назад

    easy thanks

  • @marmarjalali2702
    @marmarjalali2702 5 лет назад

    1:44 what is name this ? On door?

  • @gracerowilajuguilon
    @gracerowilajuguilon 5 месяцев назад

    Where does the green part go

  • @350macam
    @350macam 6 лет назад

    Merci de m'avoir montré comment démonter le verrou, en appuyant sur les 2 tétons en plastique.

  • @jillmcdonald698
    @jillmcdonald698 7 лет назад

    How do I replace inner lock on my tumbler dryer hot point Aquarius VTD00P

    • @darranbrown6507
      @darranbrown6507 7 лет назад

      Jill Mcdonald I'm a UK white goods engineer I've worked on hotpots for years you have to take the side panel off on the lock side unless you can access it from the top when the Lid is removed some models vary

  • @TheCWMHALL
    @TheCWMHALL 7 лет назад +2

    Everything is made of Plastic, my Ariston has the door locked , watched a Video how to do the string method. Need a new lock , call out is almost the same cost as a new machine ,

  • @leannedupuy1960
    @leannedupuy1960 2 года назад

    who can tell me how to remove the 🔐 padlock from the hoover 14000 machine?

  • @emibias3960
    @emibias3960 6 лет назад

    Why don't you have a link to your website on in the show description?

    • @emibias3960
      @emibias3960 6 лет назад

      Better still, how about a link to the interlock section of the website.

  • @specialrepair
    @specialrepair 9 лет назад

    How can I check the interlocks in washing machine the model is bosch logixx 9 varioperfect e-nr WAS24422GR/07. The code of the original door lock is 00619468. Contacts are 3,2,1 which bridge cables.because I understand I have problem with the washing machine if anyone knows let's answer thanks

  • @jg-xu6lp
    @jg-xu6lp Год назад

    thats a door catch not the lock ?

  • @rcrmovies9054
    @rcrmovies9054 Год назад

    Well done Darth Vader

  • @sawkmicoc4287
    @sawkmicoc4287 Год назад

    Hate how they dont use screws on interlocks anymore.

  • @Banjo_Oz
    @Banjo_Oz 5 лет назад

    Skipped the important step of how to unlock it when the door mechanism opens the other way!!! ("reach up under the bottom..." then skip ahead without showing us!)

  • @jg-xu6lp
    @jg-xu6lp Год назад

    sorry my mistake it is lol

  • @andyh4573
    @andyh4573 Год назад

    Who is the gobby git in the background ?

  • @andyh4573
    @andyh4573 Год назад

    Ok ok 🤗