Hand Cranked Grinder Restoration [Light Grey Bench Grinder]
HTML-код
- Опубликовано: 10 мар 2022
- This restoration is a hand cranked grinder. The condition of the old grinder is not the worst, but the antique machine is partially rusted, shafts are crooked, paint damage and more I have to eliminate in this project. Many simple techniques are used in the restoration, such as: Sandblasting, working on the lathe, working on the lathe, using a press brake, using rust remover, painting with spray cans, filling the objects, welding, polishing and some more.
The video is a little longer this time, but that's because I don't want to leave out any step or detail. It is not about speed and efficiency in my videos, I'm all about calm and patience to complete the tasks precisely and accurately. It can happen that you invest several hours for a small thing. Therefore, please note that this video is not only to quickly show someone how something works, but it should also help to relax and escape from everyday life!
▬ What did I do ?! ▬▬▬▬▬▬▬▬
As with any overhaul, this old grinder has to start with disassembly, which is a lot of small parts and a few large major components. I noticed that one of the shafts was bent and I had to rebuild it during the course of the project. I also had to remake the sleeve for the wooden handle, the shaft for the wooden handle and the wooden holder for the grinding wheel. After I filled and sanded the parts, they were primed, sanded with wet sandpaper, and then painted. I treated the insides of the covers with heat resistant paint so that sparks would not destroy the paint there later. I painted the hand crank sander in light gray, the old remains on the antique machine told me that it must have had this color originally. Turtle helped me a lot with this project again, did you actually notice anything about Turtle?
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: Screwdriver, tweezers, pliers, wrench, pin punch, hammer, water, soap, wire brush, lathe, brush, paint stripper, scriber, ruler, angle grinder, deburrer, cordless screwdriver, drill, sandblasting cabinet, tap, tape, file, sandpaper, welding machine, welding helmet, putty, primer, scalpel, spray paint, heat-resistant paint, sheet metal, chisel, saw, folding bench, rust remover, polishing stand, polishing paste, linseed oil varnish, chisel, lathe, grease
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you see and you want to help the channel to develop continuously? If you want to support me you can donate via Paypal:
www.paypal.com/donate?hosted_...
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks! - Наука
I fall asleep to these on a daily basis.. the passion you have for your craft is beautiful. Keep up the good work! 🐢
Thank you very much! 🐢
I do to honestly its so satisfying and relaxing
ruclips.net/video/Lmq73ZG0ZYo/видео.html
Same.
Anytime I’m having trouble getting to sleep, I just watch one of these and it works perfectly
I randomly stumbled across this channel despite it not matching up with many of my interests and I am enthralled. Its so relaxing and satisfying. Thank you for sharing!
I liked the Turtles eyes🐢
🤣👍🐢
Very nice. That takes me back many years. My grandfather had one of these. Thanks for the trip down memory lane
I enjoy the longer videos that show the detail.
And yes your work is an amazing by God.
The turtle is the best friend of restoration 😂🐢🐢🐢
Congratulations! Great Work! You're amazing keeping all the details
Thank you for your great Feedback! 🐢
excelente. muito bom.
Really good add on for future eye protection.
Yall are talking about how you fall asleep to these, while here i'm not allowed to touch any device when I want to sleep ;-;
Then how are you commenting on videos if you’re not allowed to touch the technology all around you?
I like the faces on the turtle lol
🤣🤣👍🐢
My mechanics would be proud!
This man could dismantle a car and not make a noise
This restoration was really nice. It helps that it wasn't in too bad a condition to start, but you really brought it back to brand new!
어린이도 볼수있게 중간중간에 거북이를 넣는 센스! 아주 놀랍습니다
I love how you give 🐢 an edited face
So many of these old tools my Dad had in The garage. Its good seeing them again. Good memories of Dad puttering around in the garage.
🤩👍🐢❤️
Love how you edit your face onto the turtle
Thank you! 🤩🐢
Yo, this is good video.
Crazy how the turtle face is just goofing, also when he was taping inside a hole
I don’t know why I love this channel, but I do!😍
🤣🤣 Thank you 🐢🍻
Nice, informative captions.
Wow wow wow, toller Job! Sehr professionell und deine kleine rote Schildkröte auf dem Stickerpapier gefällt mir auch sehr gut! Ciao🐢👋🏼
Freut mich, danke! 🐢
Отличная работа! Поздравляю! 👏😀
Большое спасибо! 🐢
Hammer. Ich mag deine Detailtreue (auch wenn das Objekt hier und da etwas undankbar damit umgeht ;)) und dein tolles Upgrade mit dem verstellbaren Aufsatz.
Ich musste echt lachen, als die Schildkröte angefangen hat, lebendig zu gucken 🤣
VIelen Dank für dein tolles Feedback! 🤩👍🐢
The face on the turtle is priceless.
a tartaruga é uma das melhores partes
For plugging the screw holes and others, try just shoving a cotton ball into it. It forms to the shape and is easy to remove with needle nose pliers. 👍🏼
Your turtle even get's a welders shield. And for me. Thank you for this
😅🙈🐢
I have become hooked on these videos, thanks for taking the time to make them. Love the humour as well
Thanks very much! 🐢
VERY GOOD 👍🏼 😍😍😍
Thanks very much! 🐢
I love how turtle has a face now, lol! That alone earned my sub! 🤙🏽
I appreciate the filter over the welding sections. My Mechanics is excellent, but they require practicing your safety squint on the welding.
What a transformation! It looks better than new.
🤩👍😊🐢🍻
Nice. Another edition to your weapon's factory
I am just in awe of the skills you possess
I love it when I see someone that can just be a little silly.
🤣🤷♂️🐢
very nice👍👍😘
왠지모르게 마음의 안정을 찾았습니다
The welding mask bit with the turtle was so funny
🤣🤣👍🐢
Frightened☺️
Your video's is what I watch on my lunch breaks love your work sir keep it going👍👍
Thank you very much! 🐢
Oooooo!!! Awesome!!
《Pick!》nice)
Turn old thing into a new thing, make it the best video I ever seen
I love watching your channel. It’s nice seeing 🐢 assist you. I know he was appreciative of the face cover you applied for safety.
🤩🐢👍
Great work restoring the grinder. It looks good and it works like charm, too.
Looks good
I love this video.
Awesome job there bro that looks really great excellent Man excellent
Thank you very much! 🐢
Not sure why but your videos fill me with joy. It's always fun to watch and see how things change in your hands!
Thank you very much! 🐢
Turtle with a face is my new favorite thing 🤣🤣🤣
🤗🤗🤩🐢
Turtle is adorable and the eye guard is fantastic! You did a very good job restoring it!
Thank you very much! 🐢
I love to see the turtle 😂 is my favorite part 🖤 good Job my friend. 😁👌
Thank you very much! 🤩 🐢
Beautiful work
Thank you very much! 🐢
3:52 the turtle stare was a funny detail
Genius.
Where do you find these gems!!???? Wow! Fantastic!!!
Beautifully done 👍 I liked all the lathe work and the fabrication of the new safety device. Looks amazing.
Thank you very much! 🐢
Good very nice 😍🥰😘
Your my favorite Restoration channel
🤩👍🐢
I love how you put a filter when you welded the hinges, so it was like we put on the mask too. 🤣
And fantastic job
Thank you very much! 😊🐢
Masterpiece 👍🏻👍🏻👍🏻
Excelente trabalho. Parabéns 👏🇧🇷
Muito obrigado, bom ter seu nome aqui novamente! 🐢
@@ForgottenShineRestoration Uau vc fala português bom sabem, seu trabalho e incrível!
Kolay gelsin.
Great, thank you!
This is a "Wet" grinder..water is used to keep the objects cool while grinding
Your add ons are spot on!..great fabrications!
3:53 had me so confused!
Amazing video as always, mad respect you're a pro, keep it up!
Thank you very much! 🐢
WOW ! 👏👏👏👏👏 당신의 복원기술은 예술 입니다. 나는 당신의 비디오를 보는 것이 매우 즐겁습니다. 당신의 재능에 경의를 표합니다 🙏 💜 좋은 영상을 만들어서 보게 해 주신 당신께 감사드립니다. 당신과 당신의 소중한 가족과 친구들 에게 신 의 축복이 있기를 기원하겠습니다. 작업을 할 때 다치지 않기를 바랍니다. 대한민국 🇰🇷 에서 Mr. JEONG 이 당신을 열렬하게 응원 합니다 👏👏👏👏👏 굿바이 ! 😄😄😄💚💜💟🖐🖐🖐🇰🇷🇰🇷🇰🇷
Nice details on video 👍
Thank you! 🐢
Hi, very good restoration, just to let you know this was a wet grinder, the base should have water in it, there should be a drain hole with which to drain the dirty water. regards
I love your work and the way Turtle inspects everything! 💗🐢
Thank you very much! 🐢
What a beautiful piece of equipment and you did such a great job letting it shine again. Thumbs up!
Thank you very much! 🐢
The process and the final product are just amazing, very satisfying :) keep the great work 🐢
Wow , a long video but amazing job you did'it...just perfect ,no more words !!! 👌👌👌❤❤❤👍👍👍
Thank you very much! 🐢
Great work, very professional look and functionality for this tool is a given. Kudos for your patience and craftsmanship. Thanks for sharing this video. 👍👍😁😁🇨🇱🇺🇸
Thank you very much! 🐢
I really don't know how you do it it you should never stop RUclips and Kan you please do a Katana or sword restoration next and keep up the good work
We definitely enjoy your skilled restoration of old machinery, but we really enjoy your turtle that reminds us of the annoying orange...without the annoying! Please keep making new videos.
🤣🤣🐢
😍💜💜💜
Bu alet el değirmeni değil bıçak bileme aletidir.
The turtle face 😂
I wonder if he's going to restore the turtle when she'll all used up 🤔
Very good work lad :) I find ear plugs work really well for plugging smaller holes before painting :)
Very nice, excellent job.
Thank you very much! 🐢
Just curious, do you do anything with all those metal shavings?
I love 🐢 also I have one :D
🤣🤣🐢
Perfect...
Thank you very much! 🐢
Sir, I believe the grinding wheel runs in water for cooling, and as the wheel spins it runs through the water in the reservoir. great work. Have a blessed day.
I think the water serves as like a thing for more friction, kinda like a whetstone. I dunno though.
great bro, you are very creative, I always support you
Thank you very much! 🐢
Very impressive and a lot more patient than me. Keep the videos coming.
Thank you very much! 🐢
Amazing job my friend congratulations
Thank you very much! 🐢
Nice video mate :)
Thank you! 🐢
You can save yourself a lot of time and effort by using foam disposable shooters ear plugs to block holes when painting it saves time from taping all those holes. They are very cheap or free at trade shows. You can squish them down for small holes or use 2-3 for largest holes.
I love this tip, thank you so much!!! 🐢🤩👍
Try doing this. Put your thumb of one hand on the end of the screw driver while with the other hand turns the handle. You might not be able to do this because you might be holding a camera. I additionally have a solution for that. There's a device that holds cameras that's able to be worn by the user. It's worn by around a person's chest sk that he or she is able to use both of their hands.
Very nice job, well done.
Thanks so much and great to read from you! 🐢
Top plate does not fit?? Otherwise excellent work😊
А как же поточить что-нибудь для тестирования ?
Шикарно👍👍👍❤️😎
The turtles face at the beginning 😂
🤣👍🐢
The amount of patience, dedication and effort that you need is crazy! Good job to you, just subbed!
Thank you very much! 😊🐢
عالیه واقعا من که ایرانی هستم تو هم هستی درسته ؟
Very good Job Love it sieht auf jeden Fall wieder top aus❤️👍❤️
Dankeschön 🤩🐢