FYI, the recall redesigned 3/8's Flex Head is even stronger now than the original. They made the pawl wider so there's more contact with the teeth on the gear. I think the gear might be a bit larger as well. They also improved the switch by making it shorter and more flush with the head, so less prone to breaking. They also changed up the face plate and screws. I recommend you actually go and exchange yours, or at least pick up another new one.
They look identical to my almost $400 Matco set. Wish they would’ve had those when I bought mine. Those wrenches are a must for any mechanic that turns a lot of work.
Harbour Freight is getting better and better. I have recently started building out a full set of icon tools. I have been using them exclusively for a month or so and have no complaints. I have never been able to afford tool truck prices I have always had craftsman and Blackhawk stuff a long those lines.
Id rather have the Sears Craftsman than any other tool truck brand. But since it's no more and I don't want to buy any off eBay, and want warranty to get the same item I purchased with quality. I went with ICON
Comsumers will always push companies to do better or they will fall. Icon continues to impress me and I own snap-on, matco, mac, and cornwell tools. Since i dont wrench for a living anymore Icon is more than adequate for the price point and quality.
What I like is you just walk in and walk out. You don’t have to wait for your replacement. So do it on your way home and you’re in business the next day
@@Glewisme I got the Cornwell ones because from what I could find they’re the only ones come in 24/27mm which is really handy for doing alignments. Matco and snap on have a 24/25mm, I don’t think I’ve ever once used a 25mm.
@@karlgregory8190 most of snap-Ons stuff is still USA made. They list the country of origin of all there tools on their website. Just have to look under the tools specs. Now their cheaper brand Blue Point is almost entirely outsourced.
Congratulations! They look awesome. I just picked up the combination open end ratcheting wrench sets in SAE and metric. I used a 20% off coupon on them. I haven't used them yet, but I do like the looks and the feel. I am a weekend warrior who enjoys tinkering on classic muscle cars.
Yea I got the tekton too I like the 6 point way better than than spline drive stuff lol the offset is kinda cool on the kabo/icon mountain etc.. wrenches and the reverse button is nice but I like the tekton ones they're good to me so far
@@motorpsykler Personally, Harbor Freight is a nearby warranty advantage to me, but long run bad for US manufacturing. Tekton has way more usable sets of tools offered and actually makes about 20% of their stuff domestically. All of their product is great quality for the money, and it will still get replaced if it fails. I'd have to reward Tekton with my money I think. If I were still wrenching for money I'd probably pay HF for convenience, as it's a small side trip on the way home. Usability? I like 6 point but you know as soon as you buy, that spline drive would come in handy, and vise versa. I have lots of 6 point options myself.
I like the fact that you actually are purchasing the tools you're reviewing. You and Garnett tools I feel I can trust your opinions on tools . I bought the 3/8 Astro swivel impacts because of your video. Couldn't be happier. I bought the 3/8 Nano impacts as well great tools. Thanks!!
This is the same set I have. I bought this set because they were affordable for me. I was set on buying a cornwell set at the time and I didnt regret my decision.
I probably would’ve went Icon too, but bought the Matco’s right before the Icons came out. My Matco dealer did give me a good deal on them though, and he’s a good dude, so it’s all good.
@@blakeryals8284 the only one not usa made are the extending indexing bars. The other are usa made. Or at least were usa made when git mine when they first came out.
@@blakeryals8284 Matco has 2 types of indexing pry bars. I know mayhew makes the normal pry bars I was talking about the ones A.J. makes. I missed the part where you stated you were talking about the extended versions. My bad.
The push switch looks very similar to that of an old SK Frankenstein ratchet. Simplest ratchet mechanisms I've ever disassembled- I love mine from a historical as well as usability standpoint. They are fun to use because the ease of the switch. I may have to check these out too as it looks like a damn handy tool to have.
I hope they work out for you. I got the Gearwrench ones because they have one side non-ratcheting for high torque purposes. But I am stuck in a small toolbox so I do like the idea that this set doesn’t take up as much space. 💪
Awesome channel, while most of my tools are Sunex (all impact sockets 1/4”-3/4”) and my wrenches are the same. I ended up getting Icons 1/4” to 1/2” chrome deep and shallows to get into places the impacts are too thick to get into, and they have held up just fine to all the abuse I’ve thrown at them. I switched to Icons 1/4” and 3/8” ratchets, but will be sticking with my Matco 1/2” ratchets. Icon tools are really good, especially if you’re a new tech just starting out. I loved your US General 34” full bank master tech cart unboxing video. That inspired me to go out and get the red one. We’ll worth the money. Keep up the great work!
Hey Clay, sorry for being MIA for a while. I was happily surprised to see you give this wrench set a tryout. I was also wondering if you took any time to check out the Icon tool box. Maybe even give an in-depth look at one in a video, HF does allow filming inside their stores, they only ask that you avoid filming their customers. I also want to let you know that I just ordered something from Amazon, and had it shipped to your shop c/o Mr. Joe. It's a "Christmas gift" for his van, I hope he enjoys it, and everyone gets a good laugh out of it. Estimated delivery is between Dec 22, and Dec 29. I hope everyone is staying safe and healthy!!!!
I love the Icon. i got a socket set with all 3 ratchets sizes. the sockets fit nice and tight, also like the 6 sided sockets. thats my change of two cents..lol
I like this pattern but I have seen a couple of times when their length was a disadvantage and I wonder does anyone offer a shorter version of the same design
Been looking at these bad boys and the original mountain wrenches. Both are sbout the same price with the 45 off coupon i got for harbor freight, but only for 2 more days, lol. Gotta make up my mind soon. And i want to see a gearwrench 120xp ratchet on that torque tester
These look similar to the set that Mountain sells… with a much better warranty. I’m sold. Edit: ended up buying these from Matco with a student discount, got a better deal than the Icon branded ones.
I have this set in mountain brand, identical.. this design is the best ever, everyone that uses it agrees. Btw when these came out a few months ago at harbor freight the price was $150, there was no icon cupón at the time so it comes to the same thing.. Harbor freight warranty is the best, you also don't need to be registered to swap this out , the lifetime warranty is with the tool not the owner, they have always swapped no questions asked.
Can u recommend any ratchets that sell for more than original price like the Craftsman 1/2 flex head are selling for 250 and 300 and are going up in value not like snap on that sell on offer up for less than original price and also the double box Craftsman wrench metric are up as high as 500 there has to be one tool u can recommend anything that sells for double the retail
Hft is definitely great for tub o towels. Best price I can find. I personally feel like ICON is generic tool truck. Just as good but my buddies don’t give me that snap on look of admiration yet my wallet is greatful I finally bought similar quality fir generic price. It’s like Kirkland got Costco. Works just as good as name brand but it has Kirkland written on it ( or ICON in this situation ). If I win the lottery I’m not buying icon I’ll buy any tool truck brand from my favorite rep of any brand but I’m nit winning lottery so icon is good with me
even if I won the lottery I wouldn't pay for tool truck brands just because my buddies like over paying for tools that don't work any better than the same tool for often 10x less from another company.
I have a brand new Platinum Tech (same as Icon) set purchased for $140 and used them last night on a '04 BMW M3 front brake caliper bracket. The length gives good leverage, BUT that spline design isn't too good for loosening bolts. I had to use a punch to remove the bolt from the 16mm wrench. They are a little light for a wrench, but they get into tight spaces really well. I would like to see a 6 point or 12 point design instead. Overall I give them a 6.5.
I wonder if those Icon wrenches are made by the same factory that makes the Cornwell (CRWLF5MSA) wrench set. They look very similar and have the same skips.
@@KoonTrucking dang that’s nice. I’m trying to keep it on the budget side kinda but still good quality. Eventually I’ll have an arsenal of truck tools but for now this will do. I like them gearwrench locking flex head ratchets. But I gotta get the vim ratchet set 😂
This set is awesome! I have considered this set; however I happen to have the Gearwrench 10 piece set with closed box end spline non ratcheting; for breaking fasteners loose, and the ratching same size, with spline drive and flexing head design. The Icon may be the more efficient set of the two and possibly on the market today, but the Gearwrench does have the solid end with a recest side that makes fast work of stubborn bolts or nuts in splined fashion. Both of these sets have their own unique takes. Thanks Clay, and happy holidays!
Spline drive will handle several different fasteners. But be careful on fasteners where you want to preserve the finish, it may scar. Also, it’s seemingly dishonest of Harbor Freight to say they designed a new wrench that had been in existence for years before the icon brand was even around. No digs on you Clay. Thanks for the video. If I didn’t already have a similar set from ezred, I would consider this set for sure.
Nice video! At the end of the day majority of tools get the job done, just depends which you want to use in your hands. When I grab a ratchet or screwdriver I use different brands, milwaukee, harbor frieght, snap on, but I just like the snap on brand so it is worth it to me. Even if I break a hf tool, I usually have extras to get me by until I go get it replaced. Some of the tool truck tools ie ratchets and screwdrivers are just better than other brands, but when it comes to sockets or wrenches anything works. I did buy a set of snap on sockets with the magnetic tray though for reefers. Then I can just set them somewhere close.
In my experience, spline drive of any brand is ok until you get a really tight bolt that is not a spline bolt. In those cases, I have had spline slip and had to go back to something else to break it free. Hopefully that is not your experience.
Various hard to reach bolts, one specific application that I can come up with off the bat is I've used them on multiple times are left hand side lower exhaust bolts on the Ford 3.5 in the 06-12 Fusions
Buddy buddy. been trying to find those GP impact sets for my torque wrenches. But can't seem to locate a dealer local. Woulddddd you have a second or third option to consider? Not a pro but building out my track day package to be a mini garage on wheels.
@@KoonTrucking I was thinking that. but i'm trying to buy in person for good folks for my track day garage tools. Been hitting up Ace Hardwares and the such over big box and online. As to why I'm talking to joe. but haven't heard back in a day or two. Just wanna help in person as much.
Yeah I was going to buy the Mountain set at Amzn but I paid an extra $40 at Harbor Freight so I don't have to mail them in as I assume I will use the warranty. If you look at the reviews these wrenches are loved by most but do tend to break so I felt the walk into the store warranty was worth the extra money. I wouldn't think it would matter but some people in reviews were having warranty problems with Mountain sold by sellers that were no longer in business.
@@darrencate I've had my set for over 5 years and I haven't had to send anything in... haven't had a problem with them at all.... I take care of my tools though..... honestly I barely ever really Factor in how easy it would be to get an exchange on a tool because I've never had one break on me and /or had to replace them....
They are both the same manufacturer so…. Whichever is better for warranty. So if you Napa will warranty and they keep them in stock, do it. If not Harbor Freight.
@@KoonTrucking didn’t know that. Hope I run into a icon coupon but doubt it. My city has both harbor freight and Napa close by so I guess now it’s personal preference. Happy Memorial Day!
I've never had any problems with Harbor Freight tools. I always figured if I break the tool I can always replace it. Tho I have to admit it's a pain to gather up my broke tools and haul them to the store wereas the truck tool I break one I just have to wait up to a week and replace the tool then. So truck tools vice store tool vice order on line. Whitch is better? Depends on your situation, I guess!!!!
I threw mine away. The problem I had was the switch. If your in a tight area and need to ratchet, the switch itself, if you bump it, will reverse the gears causing it to ratchet the opposite way. And I don't need to tell you how frustrating that can be. If the switch was placed in the usual spot it would be a great tool. As it is now it's not worth the price
Can't beat the price and the Lifetime WARRANTY no questions asked! Just like Craftsman tools by Sears, just replaced them anytime at any HF store no questions asked, no receipt needed!
Nice video. I myself am at a stand still on these type wrenches. I was planning on purchasing the gear-wrench brand, but I keep hearing differing/mixed reviews on these vs the Expert (Mac) doubled enders. The expert and GW’s are similarly priced. If money want a concern what brand would you go with?
I would go harbor freight. Kabo owns the patent so they are all probably made in the same factory at the end of the day and the ease of warranty is always there
It doesn't really matter where it's made. The quality of the product is largely dictated by the manufacturer spec. Most made in China items are cheap because the manufacturer spec'd it cheap.
Are there really any of the similar wrenches, no matter who's selling them, that are actually made in USA? To name a few, Carlyle, Gearwrench, EZ Red, Mountain, Platinum, on and on, they're all made in Taiwan I believe.
People are too good for icon. I get the $1 items at hft suck and I’ve bought em. But hft has fine stuff, credit if needed and warranty and if nearby a great decision.
Icon is a great line so are the Doyle pliers and their indexing pry bar harbor freight needs to get took trucks and up their quality a smidge and they can tap into another market
That’s the best comment you can come up with? Where are your videos/reviews? You’ve had a YT account for 6 months with no videos and you come here and leave this comment because someone cares what you think? This guy puts out videos on all different types/brands and some things HF has are worth the money. So what he pays for a toolbox doesn’t have anything to do with what tools he uses or doesn’t.
FYI, the recall redesigned 3/8's Flex Head is even stronger now than the original. They made the pawl wider so there's more contact with the teeth on the gear. I think the gear might be a bit larger as well. They also improved the switch by making it shorter and more flush with the head, so less prone to breaking. They also changed up the face plate and screws. I recommend you actually go and exchange yours, or at least pick up another new one.
Would really love to know how these wrenches are holding up as well man
Great no complaints
they look really good....can't wait for an update on how they hold up !
They look identical to my almost $400 Matco set. Wish they would’ve had those when I bought mine. Those wrenches are a must for any mechanic that turns a lot of work.
Harbour Freight is getting better and better. I have recently started building out a full set of icon tools. I have been using them exclusively for a month or so and have no complaints. I have never been able to afford tool truck prices I have always had craftsman and Blackhawk stuff a long those lines.
Id rather have the Sears Craftsman than any other tool truck brand. But since it's no more and I don't want to buy any off eBay, and want warranty to get the same item I purchased with quality. I went with ICON
These wrenches are made by Kabo Tools for many companies including some tool truck brands. Kabo holds the patents on the push switch design.
Lol yes with a quick video from garnett tools, now everyone it a know it all
Garnett is the man. I will admit that. Great guy with a great channel and content
When I watched this video I was like damn those look identical to the kabo set I picked up at their AAPEX booth a few years ago.
@@SnD340 "is"
Yep, Mountain, Icon,Carlyle and Matco that I know of.
Comsumers will always push companies to do better or they will fall. Icon continues to impress me and I own snap-on, matco, mac, and cornwell tools. Since i dont wrench for a living anymore Icon is more than adequate for the price point and quality.
I sure wish they'd bring back that Icon 3/8 flex head ratchet!
I have a set that looks identical to that one, mine is branded EZred and I've had it for 10 or 12 years, I love my set!!!
harbor freight tools have really stepped up over the past few years
plus you get a lifetime replacement warranty on a bunch of there tools
What I like is you just walk in and walk out.
You don’t have to wait for your replacement.
So do it on your way home and you’re in business the next day
@@lordrayden3045 yes I agree no muss no fuss walk in walk out
@@leokelly359
To me that’s worth something
I’ve came to trust your opinion and channel. Thanks for all your hard work
I would love to see a torture test between these wrenches and the snap on wrenches man….
I have the mountain set. Only trouble I have sometimes the fastener head or nut with get stuck into the spline drive.
I have the identical ones from Cornwell as far as I know they're all manufactured by Kabo
Yea they're all kabo from what I hear
Indeed, I’d have bought these from icon but I couldn’t find the SAE set from icon too...(tool ocd?)
I only got the Cornwell because I picked them up.second hand private sale. Otherwise I would've ordered the Carlyle,Mountain or Platinum branded ones.
@@MrSpartanicus carlyle has them in sae but yeah harbor freight doesnt yet
@@Glewisme I got the Cornwell ones because from what I could find they’re the only ones come in 24/27mm which is really handy for doing alignments. Matco and snap on have a 24/25mm, I don’t think I’ve ever once used a 25mm.
Bought these when they first dropped and they’ve held up to everyday use! Great purchase
Here me out those would look slick if you color fill them red,green or hi viz what ever color you want
Icons lineup is pretty decend. Its all made in Taiwan, same as most snap ons and tool truck brands now and its a lot cheaper too.
WHAT SNAP ON WRENCHES ARE MADE IN TAIWAN? YOU SURE ABOUT THAT?
@@karlgregory8190 most of snap-Ons stuff is still USA made. They list the country of origin of all there tools on their website. Just have to look under the tools specs. Now their cheaper brand Blue Point is almost entirely outsourced.
@Jon Doe Can you send some links to those Taiwanese Snap-On wrenches, can't find what you are talking about.
@Jon Doe the problem is their charging way more than the competitors for comparable tools
@Jon Doe they do have a high cost structure bits just not got a lot of value for all that added cost
Carlyle at NAPA makes the same sets. Ive heard they are all made in the same factory because the patent is still active.
yep kabo is the oem
Congratulations! They look awesome. I just picked up the combination open end ratcheting wrench sets in SAE and metric. I used a 20% off coupon on them. I haven't used them yet, but I do like the looks and the feel. I am a weekend warrior who enjoys tinkering on classic muscle cars.
These style are great, some of my favorite to go to wrench.. I use the mountain brand. Both is good
Hi Clay I have a set of the mountain 5 pc and I love them they are the go to wrench for hard to reach spots.🔧🔧🔧🔧
I think they are from the same manufacturer
Got the tekton set of mm and sae best set of wrench's I have spent money on.
Yea I got the tekton too I like the 6 point way better than than spline drive stuff lol the offset is kinda cool on the kabo/icon mountain etc.. wrenches and the reverse button is nice but I like the tekton ones they're good to me so far
Tool trucks have been waiting for them to fail. lol they still kicking
I’m on the fence between the Tekton and the Icons.
@@motorpsykler Personally, Harbor Freight is a nearby warranty advantage to me, but long run bad for US manufacturing. Tekton has way more usable sets of tools offered and actually makes about 20% of their stuff domestically. All of their product is great quality for the money, and it will still get replaced if it fails. I'd have to reward Tekton with my money I think. If I were still wrenching for money I'd probably pay HF for convenience, as it's a small side trip on the way home.
Usability? I like 6 point but you know as soon as you buy, that spline drive would come in handy, and vise versa. I have lots of 6 point options myself.
@@motorpsykler Tektons are a much shorter wrench..not really apples to apples but a very nice set.
I like the fact that you actually are purchasing the tools you're reviewing. You and Garnett tools I feel I can trust your opinions on tools . I bought the 3/8 Astro swivel impacts because of your video. Couldn't be happier. I bought the 3/8 Nano impacts as well great tools. Thanks!!
Icon needs to make a locking flex head
Thanks for the video Clay. I have had the Matco set for years. I haven’t broken any but she smallest wrench has a bow in the handle now!
This is the same set I have. I bought this set because they were affordable for me. I was set on buying a cornwell set at the time and I didnt regret my decision.
I probably would’ve went Icon too, but bought the Matco’s right before the Icons came out. My Matco dealer did give me a good deal on them though, and he’s a good dude, so it’s all good.
I've got Matco tools long ratchet wrenches bought them years ago, really work well
Can't wait to see the review on icon
Try the Quinn indexing extendable prybars! Matco has had some rebranded from gearwrench for a while and the Quinn's look identical
Matcos are usa made, not re-branded gearwrench.
@@TinoR626 I own all three of matcos indexing extending prybars and I am pretty sure they're not american made.
@@blakeryals8284 the only one not usa made are the extending indexing bars. The other are usa made. Or at least were usa made when git mine when they first came out.
@@TinoR626 I've been talking about the indexing extending bars the whole time. Mayhew makes matcos standard pry bars in the usa
@@blakeryals8284 Matco has 2 types of indexing pry bars. I know mayhew makes the normal pry bars I was talking about the ones A.J. makes. I missed the part where you stated you were talking about the extended versions. My bad.
The push switch looks very similar to that of an old SK Frankenstein ratchet. Simplest ratchet mechanisms I've ever disassembled- I love mine from a historical as well as usability standpoint. They are fun to use because the ease of the switch. I may have to check these out too as it looks like a damn handy tool to have.
FINALLY it's Friday, the very best day of the w........... Oh, wait........
@Rob G I don’t get it. It’s always the first comment.
I actually love it !
Hello again Clay
I am looking forward to seeing the continued testing and use. I would like to know how well they hold up, etc. Thank you again
I have that set. No complaints at all.
I hope they work out for you. I got the Gearwrench ones because they have one side non-ratcheting for high torque purposes. But I am stuck in a small toolbox so I do like the idea that this set doesn’t take up as much space. 💪
Awesome channel, while most of my tools are Sunex (all impact sockets 1/4”-3/4”) and my wrenches are the same. I ended up getting Icons 1/4” to 1/2” chrome deep and shallows to get into places the impacts are too thick to get into, and they have held up just fine to all the abuse I’ve thrown at them. I switched to Icons 1/4” and 3/8” ratchets, but will be sticking with my Matco 1/2” ratchets. Icon tools are really good, especially if you’re a new tech just starting out. I loved your US General 34” full bank master tech cart unboxing video. That inspired me to go out and get the red one. We’ll worth the money. Keep up the great work!
Hey Clay, sorry for being MIA for a while. I was happily surprised to see you give this wrench set a tryout. I was also wondering if you took any time to check out the Icon tool box. Maybe even give an in-depth look at one in a video, HF does allow filming inside their stores, they only ask that you avoid filming their customers. I also want to let you know that I just ordered something from Amazon, and had it shipped to your shop c/o Mr. Joe. It's a "Christmas gift" for his van, I hope he enjoys it, and everyone gets a good laugh out of it. Estimated delivery is between Dec 22, and Dec 29. I hope everyone is staying safe and healthy!!!!
I love the Icon. i got a socket set with all 3 ratchets sizes. the sockets fit nice and tight, also like the 6 sided sockets. thats my change of two cents..lol
I like this pattern but I have seen a couple of times when their length was a disadvantage and I wonder does anyone offer a shorter version of the same design
I’ll be interested to know how they hold up to the big three brands as well as the mountain man brand also
So far so good. I’m highly pleased with them
What do you think of the long boxend ratchet wrenches now after having them for a bit I'm thinking about getting some
They are awesome. Seriously for the money it’s a great tool
I got the same set bought mine several months ago & love’em paid $119 with a coupon 😋
Been looking at these bad boys and the original mountain wrenches. Both are sbout the same price with the 45 off coupon i got for harbor freight, but only for 2 more days, lol. Gotta make up my mind soon. And i want to see a gearwrench 120xp ratchet on that torque tester
These look similar to the set that Mountain sells… with a much better warranty. I’m sold.
Edit: ended up buying these from Matco with a student discount, got a better deal than the Icon branded ones.
I bought these just for a toyota tundra so i didnt have to take off the manifold to change the starter and got paid 6 hrs to do it
👍 great videos ! Watch them all.
good review, do a report after they have been used in the field. Does the spline drive work on square such as pipe plugs?
Yes they do. I’ve used on about 5 different fasteners so far.
Does ICON have this set in SAE? i cant find them icon has all there other tools with metric and sae but for this set cannot find 😔
I haven’t seen it in sae
I have this set in mountain brand, identical.. this design is the best ever, everyone that uses it agrees. Btw when these came out a few months ago at harbor freight the price was $150, there was no icon cupón at the time so it comes to the same thing..
Harbor freight warranty is the best, you also don't need to be registered to swap this out , the lifetime warranty is with the tool not the owner, they have always swapped no questions asked.
Can u recommend any ratchets that sell for more than original price like the Craftsman 1/2 flex head are selling for 250 and 300 and are going up in value not like snap on that sell on offer up for less than original price and also the double box Craftsman wrench metric are up as high as 500 there has to be one tool u can recommend anything that sells for double the retail
Matco sells the same thing for twice the amount of money they're both made by the same company
Great video have a great one and stay safe 👍
Hft is definitely great for tub o towels. Best price I can find. I personally feel like ICON is generic tool truck. Just as good but my buddies don’t give me that snap on look of admiration yet my wallet is greatful I finally bought similar quality fir generic price. It’s like Kirkland got Costco. Works just as good as name brand but it has Kirkland written on it ( or ICON in this situation ). If I win the lottery I’m not buying icon I’ll buy any tool truck brand from my favorite rep of any brand but I’m nit winning lottery so icon is good with me
even if I won the lottery I wouldn't pay for tool truck brands just because my buddies like over paying for tools that don't work any better than the same tool for often 10x less from another company.
I bought the 8mm x10mm Klutch version of this tool. It has been fantastic but it cost 65$. And they don’t sell them in a set.
I normally don’t use ratchets as breaker bars but that’s pretty impressive. I want a snap on but they just to damn expensive. They are nice though
I have a brand new Platinum Tech (same as Icon) set purchased for $140 and used them last night on a '04 BMW M3 front brake caliper bracket. The length gives good leverage, BUT that spline design isn't too good for loosening bolts. I had to use a punch to remove the bolt from the 16mm wrench. They are a little light for a wrench, but they get into tight spaces really well. I would like to see a 6 point or 12 point design instead. Overall I give them a 6.5.
Those paws are actually big that icon ratchet is the shit if they make a good locking flex head in a nice comfort grip with color options it’s on
I wonder if those Icon wrenches are made by the same factory that makes the Cornwell (CRWLF5MSA) wrench set. They look very similar and have the same skips.
More than likely.
More than likely.
those are same as ez reds that's who makes them they also same as matco and mountain but price best at harbor freight.
Ez red don't make them. Kabo is the maker and rebranded under many other names
Need a 21mm for suspension components.
Do you still like them? How are they holding up? What other wrenches would you compare them too? Gearwrench? Or Tekton?
they are great
they used to be sold by matco but their sold by everyone now basically kabo makes them and sticks whatever label you want on them
I wonder how the vim ratchets hold up. I just bought a 14” 3/8 ratchet. The thing is super nice
They are very nice, I have the 1/4, 3/8 and 1/2
@@KoonTrucking dang that’s nice. I’m trying to keep it on the budget side kinda but still good quality. Eventually I’ll have an arsenal of truck tools but for now this will do. I like them gearwrench locking flex head ratchets. But I gotta get the vim ratchet set 😂
This set is awesome! I have considered this set; however I happen to have the Gearwrench 10 piece set with closed box end spline non ratcheting; for breaking fasteners loose, and the ratching same size, with spline drive and flexing head design. The Icon may be the more efficient set of the two and possibly on the market today, but the Gearwrench does have the solid end with a recest side that makes fast work of stubborn bolts or nuts in splined fashion. Both of these sets have their own unique takes. Thanks Clay, and happy holidays!
Just wondering, after having them for a while now, how are they holding up?
Work great no issues
I want to purchase this set, but they skip 11mm! I need an 11m for removing my transmission drain plug.
Good tools
How are these wrenches holding up looking to snag a set do you recommend them?
Great these are awesome
Spline drive will handle several different fasteners. But be careful on fasteners where you want to preserve the finish, it may scar. Also, it’s seemingly dishonest of Harbor Freight to say they designed a new wrench that had been in existence for years before the icon brand was even around. No digs on you Clay. Thanks for the video. If I didn’t already have a similar set from ezred, I would consider this set for sure.
How do you like these after using them a couple years? Any complaints or issues?
I got them on the matco version, only reason was ease of warranty.
My monster set from Matco looks exactly the same as those lol
I went with Icon for the ease of returns. Returning online items are a pain.
Does anyone make a version of these but in a normal length? These look extra long.
You consider selling the Strap and buyin 9 more icons ?
Nice video! At the end of the day majority of tools get the job done, just depends which you want to use in your hands. When I grab a ratchet or screwdriver I use different brands, milwaukee, harbor frieght, snap on, but I just like the snap on brand so it is worth it to me. Even if I break a hf tool, I usually have extras to get me by until I go get it replaced. Some of the tool truck tools ie ratchets and screwdrivers are just better than other brands, but when it comes to sockets or wrenches anything works. I did buy a set of snap on sockets with the magnetic tray though for reefers. Then I can just set them somewhere close.
In my experience, spline drive of any brand is ok until you get a really tight bolt that is not a spline bolt. In those cases, I have had spline slip and had to go back to something else to break it free. Hopefully that is not your experience.
We will see how well it works out. This is my first rodeo with them
I have applied enough torque with mine that I was affraid they would break, and have not had any slipping or damage to the fastener.
That looks like a bad wrench 🔥
What are most people using these double box end wrenches for?
Various hard to reach bolts, one specific application that I can come up with off the bat is I've used them on multiple times are left hand side lower exhaust bolts on the Ford 3.5 in the 06-12 Fusions
Have you tried sunex tools?
Their freakin Awesome ! I love sunex !!
@@markarmstrong3394 yeah I just got their spark plug sockets and their brake caliper compressor kit and I was really amazed and good quality
@@espoca8478 I got abunch of impact sockets and a set of atd angle wrenches I truly believe was made by sunex. I aint broke a socket yet
Yes i have a few tools. They are good
Buddy buddy. been trying to find those GP impact sets for my torque wrenches. But can't seem to locate a dealer local. Woulddddd you have a second or third option to consider? Not a pro but building out my track day package to be a mini garage on wheels.
amazon has them?
@@KoonTrucking I was thinking that. but i'm trying to buy in person for good folks for my track day garage tools. Been hitting up Ace Hardwares and the such over big box and online. As to why I'm talking to joe. but haven't heard back in a day or two. Just wanna help in person as much.
I should have got these instead of matco because the matco doesn't reverse
My Mountain zero offset reversible double box end
ratchets exactly like those are $119 on Amazon....🤔 and they are exactly the same
What about the warranty? Icon, you can just take them back to harbor freight and get a new one.
@@jefftrump5779 mountain has a lifetime warranty... never had to use it though....
That’s why I went with these
Yeah I was going to buy the Mountain set at Amzn but I paid an extra $40 at Harbor Freight so I don't have to mail them in as I assume I will use the warranty. If you look at the reviews these wrenches are loved by most but do tend to break so I felt the walk into the store warranty was worth the extra money. I wouldn't think it would matter but some people in reviews were having warranty problems with Mountain sold by sellers that were no longer in business.
@@darrencate I've had my set for over 5 years and I haven't had to send anything in... haven't had a problem with them at all.... I take care of my tools though..... honestly I barely ever really Factor in how easy it would be to get an exchange on a tool because I've never had one break on me and /or had to replace them....
On these would you choose Carlyle or icon if you had to start over?
They are both the same manufacturer so…. Whichever is better for warranty. So if you Napa will warranty and they keep them in stock, do it. If not Harbor Freight.
@@KoonTrucking didn’t know that. Hope I run into a icon coupon but doubt it. My city has both harbor freight and Napa close by so I guess now it’s personal preference. Happy Memorial Day!
I've never had any problems with Harbor Freight tools. I always figured if I break the tool I can always replace it. Tho I have to admit it's a pain to gather up my broke tools and haul them to the store wereas the truck tool I break one I just have to wait up to a week and replace the tool then. So truck tools vice store tool vice order on line. Whitch is better? Depends on your situation, I guess!!!!
How have these icon’s wrenches held up ?
Great
Interesting comment(s) and good review.
Specifically the comment about being able to use it as a shallow (style) socket for low profile work
Proof that snap on is t always better it just has a big price point my local truck tried to charge me $260 for a 3/8 swivel Rachet like serioussssly
I threw mine away. The problem I had was the switch. If your in a tight area and need to ratchet, the switch itself, if you bump it, will reverse the gears causing it to ratchet the opposite way. And I don't need to tell you how frustrating that can be. If the switch was placed in the usual spot it would be a great tool. As it is now it's not worth the price
We will see how it goes
Is it just me or is there not a SAE option from Icon
Those are no designed by icon at all. They are a full kabo tools patent tool
Yep they're same as mountain matco cornwell etc...
Just cheaper 😉
Can't beat the price and the Lifetime WARRANTY no questions asked! Just like Craftsman tools by Sears, just replaced them anytime at any HF store no questions asked, no receipt needed!
Nice video. I myself am at a stand still on these type wrenches. I was planning on purchasing the gear-wrench brand, but I keep hearing differing/mixed reviews on these vs the Expert (Mac) doubled enders. The expert and GW’s are similarly priced. If money want a concern what brand would you go with?
I would go harbor freight. Kabo owns the patent so they are all probably made in the same factory at the end of the day and the ease of warranty is always there
Clay, can we get a 6 month Review?
They still work great. I’ve had zero issues with them
@@KoonTrucking thank you Clay, been contemplating buying them for a while now. I'll pick them up this weekend 👊
It doesn't really matter where it's made. The quality of the product is largely dictated by the manufacturer spec. Most made in China items are cheap because the manufacturer spec'd it cheap.
Atd makes these, I bought mine 10 yrs ago.
Actually Kabo makes them for many companies and puts names on them. They own the patent on that design.
Are there really any of the similar wrenches, no matter who's selling them, that are actually made in USA? To name a few, Carlyle, Gearwrench, EZ Red, Mountain, Platinum, on and on, they're all made in Taiwan I believe.
All Taiwan because they have the patent on it
Looks identical to Mountain
Where do you get the coupon for hf to get those set for $150?
I got it from a friend that works there
People are too good for icon. I get the $1 items at hft suck and I’ve bought em. But hft has fine stuff, credit if needed and warranty and if nearby a great decision.
Icon is a great line so are the Doyle pliers and their indexing pry bar harbor freight needs to get took trucks and up their quality a smidge and they can tap into another market
When you got a tool box payment as big as his, he has to shop at Harbor Fraight.
That’s the best comment you can come up with? Where are your videos/reviews? You’ve had a YT account for 6 months with no videos and you come here and leave this comment because someone cares what you think? This guy puts out videos on all different types/brands and some things HF has are worth the money. So what he pays for a toolbox doesn’t have anything to do with what tools he uses or doesn’t.
@@dieseldoctor9294 relax doucet I was not putting him down.
@@dieseldoctor9294 I mean like the second thing he said was PRICE POINT.
They're still pretry pricey especially for something from harbor freight but they're worth it
@@joshdane5657 I have them and like then. I have had issues with spline drive in the past stripping on supper tight non spline drive fasteners