You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
So easy to take apart when it's new! :) The trunnion block section is rusted to the shaft on mine. There is so much gunk trapped under the tub, the pump can't drain it and the water leaks from somewhere else? (Right over the top on spin cycle?)
This was a very informative video. I don't really know if I'd be able to fix my machine since it was a hand-me-down for my sister's former roommate and it's maybe 15 years old, and also I have no experience in fixing stuff like this. All I know is that there's a leak under the machine, and it looks like it's coming from right under the middle area where the tub is, though some water is also leaking down the front right leg of the machine. Maybe it's a hose leak or something, though I'm afraid to attempt especially with how old it is now....
I had the same washer as in this video, my washer spin when the tub is empty but when 4 gallon of water in the washer it won't spin...please tell me what part I need...
I have a Frigidaire top loader, about 10 years old. During the wash cycle, water is draining out of the bottom of the machine and the drum is spinning and not agitating. It does drain through the drain tube and spins fine. Any suggestions as to what to look for when I remove the front panel? Thank you!
Just got to the part where I have taken out the trunion bolts and block and the inner tub will not budge. I have a Frigidaire Gallery Top Loading Washer.... looks identical to the washer in the video.... any suggestions?
+Scott Hayes You will need to put some penetrating oil on it and let it soak in. It is most likely corroded and stuck. It may take some considerable effort to get it loose. Once the trunnion starts turning on the transmission shaft you can lift up while you are turning to get it off.
My fabric softener container is nasty dirty, it’s dirty underneath the container in the small holes, how do I clean them small holes to allow a better drainage flow?
marisela rodriguez We're unsure. That model number is not coming up when we search for it. Are you sure it is correct? Here's a video to help find the model number: Washing Machine Model Number Identification You could also try a washing machine cleaner. We sell them on our site: www.repairclinic.com/PartDetail/Washing-Machine-Cleaner/W10135699/1373065?TLSID=1773
I'm trying to take the lid off of my Frigidaire washing machine to sand it and repaint it but I can't figure out how to get it off. Can someone help me please
Raymond Swaim Could be a suspension system problem. Click here for more help with the washer: www.repairclinic.com/RepairHelp/Washing-Machine-Repair-Help?TLSID=1773
Did you figure it out? Mine leaks badly like that when I’m filling the washer, so don’t think it’s the pump... maybe a bad seal? Or internal fill line?
One of the best instructional videos I've ever seen on RUclips! I'm a videographer and DIY guy. Thanks for producing an excellent how-to video.
Informative, good visuals, straight to the point. Fixed our washer with the help of this! Thank you.
This video really helped me, thanks for sharing
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
So easy to take apart when it's new! :) The trunnion block section is rusted to the shaft on mine. There is so much gunk trapped under the tub, the pump can't drain it and the water leaks from somewhere else? (Right over the top on spin cycle?)
Like everything else, it's easy when you know how.
Buenas tardes Sr técnico qué el señor le dé muchas sabiduría por sus trabajos esplica mui bien en todo lo video de Reparaciones de lavadora
Thank you very much, good video. I will check your web page for parts!!
Hi good day how do you fix a bearing issue and what is the best washing setting as in cold/warm/cold or warm water?Thank You
Perfect! Thank you. I was able to unclog the drain pump.
This helps a lot I gotta change the drive belt on mine
Thank you very much for the video, it really helped me to fix my washer.
This was a very informative video. I don't really know if I'd be able to fix my machine since it was a hand-me-down for my sister's former roommate and it's maybe 15 years old, and also I have no experience in fixing stuff like this. All I know is that there's a leak under the machine, and it looks like it's coming from right under the middle area where the tub is, though some water is also leaking down the front right leg of the machine. Maybe it's a hose leak or something, though I'm afraid to attempt especially with how old it is now....
800th like. Thanks for this video. My machine is a bit different however video was very helpful.🙏
Can you also tell what you put in the dispenser cover?
I had the same washer as in this video, my washer spin when the tub is empty but when 4 gallon of water in the washer it won't spin...please tell me what part I need...
I have a Frigidaire top loader, about 10 years old. During the wash cycle, water is draining out of the bottom of the machine and the drum is spinning and not agitating. It does drain through the drain tube and spins fine. Any suggestions as to what to look for when I remove the front panel? Thank you!
Muchisimas gracias fue de mucha ayuda ya le repare la fuga.Thanks a lot it was really helpful.I owe you one.
Where can I find a replacement top panel for this washer in the video (fws933fs2)?
Just got to the part where I have taken out the trunion bolts and block and the inner tub will not budge. I have a Frigidaire Gallery Top Loading Washer.... looks identical to the washer in the video.... any suggestions?
+Scott Hayes You will need to put some penetrating oil on it and let it soak in. It is most likely corroded and stuck. It may take some considerable effort to get it loose. Once the trunnion starts turning on the transmission shaft you can lift up while you are turning to get it off.
My fabric softener container is nasty dirty, it’s dirty underneath the container in the small holes, how do I clean them small holes to allow a better drainage flow?
Spray bottle and vinegar. Can use tooth brush and those pipe cleaning things for holes and or a wet dry vac with hot water and vinegar should work.
we need to clean mildew from our washer model GLET10411AS1 do we need to take it apart?
It depends on where the mildew is. Locating exactly where it is will determine how much disassembly will be required.
It is in the water so hoping just by cleaning the tub it will be ok is the assembly similar to this washer?
marisela rodriguez We're unsure. That model number is not coming up when we search for it. Are you sure it is correct? Here's a video to help find the model number: Washing Machine Model Number Identification
You could also try a washing machine cleaner. We sell them on our site: www.repairclinic.com/PartDetail/Washing-Machine-Cleaner/W10135699/1373065?TLSID=1773
What’s the load size for this model?
Please help me in finding out service manual of Frigidaire Top Load Washing machine Model#: WDA256W2, Serial #: XC52819328
Excellent thank you.
My Frigidaire top load washer is not draining the water out...any suggestions on the problem
+Kristy Mohammed The drain pump may be clogged or the motor on the pump is defective.
I'm trying to take the lid off of my Frigidaire washing machine to sand it and repaint it but I can't figure out how to get it off. Can someone help me please
If you provide us with the model number we can help.
Only washes in hot or cold. want warm?
i cant get the agitator off.
Lo necesito en español como programar labadora general
My machine won't unlock so I can reprogram it. It is stuck closed
When I turn the knob to start a cycle nothing happens. No clicking noise, no water starting nothing. It's not the outlet.
Justin Fordyce the motor needs to reset
My washer will not agitated
my washer skweeks as it agutates
Raymond Swaim Could be a suspension system problem. Click here for more help with the washer: www.repairclinic.com/RepairHelp/Washing-Machine-Repair-Help?TLSID=1773
i think it my be the snubber ring
What a stupide design . To replace dran pumb you need to deasemple all machine parts .
you only need to pull the front panel off to work on or replace the drain pump. I have the same model as in the video.
I have a considerable amount of water leaking from the bottom of my top loader. Faulty pump?
Did you figure it out? Mine leaks badly like that when I’m filling the washer, so don’t think it’s the pump... maybe a bad seal? Or internal fill line?