If it burnished, it is not alumn tanned. Traditionally, we used to call a certain type of leather “latigo”, and that leath was usually alum tanned. Now a days, most latigo leather or leather sold as a latigo leather is either chrome tanned which like alum tanning, is a chemical tanned leather (although more stable than alum tanned leather), vegetable tanned, or combination tanned leather (chrome, then veg re-tanned). I think you have veg tanned leather since it is burnishing. Chrome or real alum tanned leather does not burnish.
Sorry, I am referring to the oblong hole that you would use a crew punch for. I think your idea of fitting the tongue into the punch for the sizing holes is genius!
For something like this I use a 1 inch oblong punch, and that works pretty well for most buckles that I use, whether for dog collars or belts. But really you just want to make sure it moves smoothly, and isn’t too big or small for the buckle pin (by that I mean some are welded, and some are twisted around the pin like the one I am using in this video. The welded ones are much thinner and don’t need as big of a oblong hole). Testing on a little piece of offcut is often easiest for the type of buckle you have.
Haha! Excellent :) Rivets are much easier for a lot of projects. Check out my vid on making the riveted handbags, they can be a little more tricky but take way less time than stitching too!
Gracias, bueno y muy completo. Podrías mejorar las tomas del trabajo en algunos detalles, pues no se aprecia bien. Tapas con la mano lo que estás haciendo y no se puede ver.
Can be variable with the thickness of the leather you are using, and the thickness of their fur. If you have the dog nearby, the easiest way to make a perfect fit would be the same as a custom belt: Make the buckle end first; and then test fit it for marking the center hole.
Confused about the process on edges. I see you used bees wax and THEN tallow? Is tge tallow going to be able to get into the leather if you just sealed it with bees wax? Or are we supposed to just put a light coat of bees wax? Unsure...
It will get in there OK. If you know that is how your leather will work in advance, like if you have been having problems with the whole hide, then you can certainly do it before putting the bees wax. You can also sand it with sandpaper for really stubborn bits.
Thai Vuu well that would make a good conditioner for leather, and certainly soften it, but I have never tried it for burnishing. Give it a go and let us know how it works! :) Also you can sand the edge with a fine grit sandpaper, around 800 grit for best results, or even an emery board (nail file) if you have one laying around the house... my wife's are never safe!
Michelle Ford Thanks! I am still learning a lot, but enjoying the process. I get my strap keepers from Adelaide leather and saddlery here in Australia, and I like them because they are a solid cast piece. But you should be able to get similar locally wherever you are, just look for 25mm brass belt keepers.
Ok I live in the USA i should be able to find them here.I just never seen anybody else use them thanks so much for the information . I have not started yet but i can't wait until i do it looks like so much fun
Hi Brandon, If the collar gets wet, dye bleed can happen. And also any excess can rub off, even when it remains dry. That is because the dye behaves differently to leather that has been painted (like most commercially available collars) The black is fairly minor for rub off though, because it is hidden... but the burgundy latigo is a real oily leather... it will absolutely rub off, and will cause dye bleed like a stuck pig when it gets wet the first few times. Staining of the dogs coat will happen, but the effects are temporary. My border collie had a bit of discoloration for about 3 months, and we took him swimming in his collar too. But since then, even when wet, he has not been stained again.
Where should I buy leather for making collars? What should I search for? Do you have a site you recommend? I tried searching online and I just can’t find anything...
G'day Aiden, depends where you live. What country are you in? If you are in UK or USA then your options are great, and a good starting point for new leatherworkers would be Tandy Leather. But if you search for leather and saddlery suppliers you might find some in your area that stock leather for sale. Here in Australia I use Birdsall Leather mostly, or East Coast Leather.
For collars you want to look for weather resistant types of leather. Waxy or oily leathers, with a good firm temper (not floppy). Usually vegetable tanned, or combination tanned. Something like Latigo is good, but be wary of dye bleed from oily leathers. English bridle or harness leathers are usually more waxy, and are great choices but are premium leathers and can be expensive.
I got it from Tandy before they closed shop here. But there are some good options around. Birdsall leather stocks duall which has a good reputation. Or if you are in a pinch, bunnings has a variety of contact cements too, I'm using one from there now (because I was an idiot and forgot glue in my last leather order from birdsall)... but it's working quite well. Sika 4600 contact adhesive. Comes in a 1L screw top tin but has no brush so get a cheap little brush while you are at it. Hope that helps!
Very impressed with the quality of the build on this collar! Thanks for the great tutorial.
Thankyou! I’m glad you enjoyed it :)
Came along a little late to your channel. I appreciated your calm and patient approach...Thanks
I leave the leather clippings for the birds, they take it for nests
Great idea!
Very nice, superb attention to detail...Thank you
Congratulations on the excellent work,
Tks
Dude I love ur makeshifting. We all do it.
JE Theron thanks mate! Whatever gets the job done :)
“... and a hammer to whack things.” ... made me laugh for some reason... lol
Hahaha that's awesome, thanks for the comment :)
Very nice tutorial and very detailed. I believe you are one of the best, I’ve watched quite a few of them. Thank you very much I’ve learned a lot.
Donna Bowers thanks for the kind words Donna! It makes me feel good to know that it is appreciated :)
Great work, thank you.
If it burnished, it is not alumn tanned. Traditionally, we used to call a certain type of leather “latigo”, and that leath was usually alum tanned. Now a days, most latigo leather or leather sold as a latigo leather is either chrome tanned which like alum tanning, is a chemical tanned leather (although more stable than alum tanned leather), vegetable tanned, or combination tanned leather (chrome, then veg re-tanned). I think you have veg tanned leather since it is burnishing. Chrome or real alum tanned leather does not burnish.
That is a great how to vid! Thanks for posting.
K B O Leather glad you enjoyed it! :)
Sorry, I am referring to the oblong hole that you would use a crew punch for. I think your idea of fitting the tongue into the punch for the sizing holes is genius!
For something like this I use a 1 inch oblong punch, and that works pretty well for most buckles that I use, whether for dog collars or belts.
But really you just want to make sure it moves smoothly, and isn’t too big or small for the buckle pin (by that I mean some are welded, and some are twisted around the pin like the one I am using in this video. The welded ones are much thinner and don’t need as big of a oblong hole).
Testing on a little piece of offcut is often easiest for the type of buckle you have.
Very well done.
Beautiful because I suck at sewing LOL This is perfect.
Haha! Excellent :)
Rivets are much easier for a lot of projects. Check out my vid on making the riveted handbags, they can be a little more tricky but take way less time than stitching too!
Great!! and I envy your work place
Thank you! It's a work in progress, but I am super lucky to have this amount of space for sure.... this guy has far too many hobbies haha
Thanks well done
Gracias, bueno y muy completo. Podrías mejorar las tomas del trabajo en algunos detalles, pues no se aprecia bien. Tapas con la mano lo que estás haciendo y no se puede ver.
Tan Espinosa Thankyou! And thanks for the feedback, I will do my best to improve.
Question- my dogs neck is 19” - plus 8” is standard = cut length of leather total - 27”. Is this correct -? Beautiful craftsmanship-
Can be variable with the thickness of the leather you are using, and the thickness of their fur.
If you have the dog nearby, the easiest way to make a perfect fit would be the same as a custom belt: Make the buckle end first; and then test fit it for marking the center hole.
Watching again and taking notes. How do you determine the size of the hole for the buckle tongue? Thanks.
Confused about the process on edges. I see you used bees wax and THEN tallow? Is tge tallow going to be able to get into the leather if you just sealed it with bees wax? Or are we supposed to just put a light coat of bees wax? Unsure...
It will get in there OK.
If you know that is how your leather will work in advance, like if you have been having problems with the whole hide, then you can certainly do it before putting the bees wax.
You can also sand it with sandpaper for really stubborn bits.
I m from Melbourne I m new to leather craft ,instead of fat can I use jojoba oil to burnish stubborn edge? Thankyou
Thai Vuu well that would make a good conditioner for leather, and certainly soften it, but I have never tried it for burnishing. Give it a go and let us know how it works! :)
Also you can sand the edge with a fine grit sandpaper, around 800 grit for best results, or even an emery board (nail file) if you have one laying around the house... my wife's are never safe!
I love the way you explain thing your tube's are easy to understand could you tell me where i could get the retainers
Michelle Ford Thanks! I am still learning a lot, but enjoying the process. I get my strap keepers from Adelaide leather and saddlery here in Australia, and I like them because they are a solid cast piece. But you should be able to get similar locally wherever you are, just look for 25mm brass belt keepers.
Ok I live in the USA i should be able to find them here.I just never seen anybody else use them thanks so much for the information . I have not started yet but i can't wait until i do it looks like so much fun
Süpersin benimde mesleğim kemercilik
Will the black water based dye discolor the dogs fur when wet?
Hi Brandon,
If the collar gets wet, dye bleed can happen. And also any excess can rub off, even when it remains dry.
That is because the dye behaves differently to leather that has been painted (like most commercially available collars)
The black is fairly minor for rub off though, because it is hidden... but the burgundy latigo is a real oily leather... it will absolutely rub off, and will cause dye bleed like a stuck pig when it gets wet the first few times.
Staining of the dogs coat will happen, but the effects are temporary. My border collie had a bit of discoloration for about 3 months, and we took him swimming in his collar too. But since then, even when wet, he has not been stained again.
Where should I buy leather for making collars? What should I search for? Do you have a site you recommend? I tried searching online and I just can’t find anything...
G'day Aiden, depends where you live. What country are you in? If you are in UK or USA then your options are great, and a good starting point for new leatherworkers would be Tandy Leather. But if you search for leather and saddlery suppliers you might find some in your area that stock leather for sale. Here in Australia I use Birdsall Leather mostly, or East Coast Leather.
For collars you want to look for weather resistant types of leather. Waxy or oily leathers, with a good firm temper (not floppy). Usually vegetable tanned, or combination tanned. Something like Latigo is good, but be wary of dye bleed from oily leathers. English bridle or harness leathers are usually more waxy, and are great choices but are premium leathers and can be expensive.
How wide is your dog collar?
1 inch
What's all the crazy noise in the background
Where did you buy tanners contact cement from? I’m in Aus and Tandy don’t ship it to Australia!
I got it from Tandy before they closed shop here. But there are some good options around. Birdsall leather stocks duall which has a good reputation. Or if you are in a pinch, bunnings has a variety of contact cements too, I'm using one from there now (because I was an idiot and forgot glue in my last leather order from birdsall)... but it's working quite well. Sika 4600 contact adhesive. Comes in a 1L screw top tin but has no brush so get a cheap little brush while you are at it.
Hope that helps!