Hey man I had the same issue you had with the right side tube bending. I figured out a solution I cut that tube in half where it was bent and went to home depot and got a copper L fitting and two additional band clamps that way it can bend an have free flow. It was about 10 bucks.
@@Rythecarguy haha NP this is such a great alternative compared to the jlt catchcan although its less invasive and mounts in mid air. Its also $150 compared to about $20-$30 from Amazon.
Love your content. I just installed Detroit Rocker cam on 05 gt. The oil cap has alot of vacuum pulling on it and runs bad or stalls with cap on. I removed pass side pipe to intake tube and placed an air filter on valve cover and it runs good. Any ideas why this happens?
06 GT here, I installed the "Powered by Ford" manifold cover,throttle body cover,& matching fuel rail covers. Looks great but Im not sure I could even install this with the covers on ? The car only has 36k miles so would it be a good idea to go ahead and put one on while she has low miles ?
In my opinion the sooner the better. It will help keep everything clean. I had my heads refinished and wanted to keep them as clean as possible. This is probably the best way to do it.
hi i wanted ask you about oil pressure on a 2005 mustang gt 4.6 the oil pressure gauage on the dash it goes up to like 3/4 the way up on the dash it runs there i hooked up a real oil pressure gauage when u first crank it up it goes over 60 psi and when it operating temperature it goes down to 15 psi there is no low oil pressure warning coming on it never has also when u do the systems check it says the oil pressure is ok when you pat the gas it goes up like it should it just at idling its showing 15 psi and the dash gauage is showing its over like 3/4 on the dash it stays there all the time as long as the motor is runing it dosent come down any till u shut the motor off i ust motul 5w30 engine oil if u can let me know i appreciate it thanks
Hi , I just watched your video where you replaced the timing belt on the TT, I had mine replaced and right after it started throwing a bunch of codes (overboost, pressure drop near DV etc). Do you know how that might’ve happened by chance.
If you are just putting them I’m I would check in 500-1000 miles just to see how they are doing. You should only have to empty them when changing the oil but each engine is different.
I just added 2 of them to my super charged 2008 gt . To all you mustang owners this is a must do mod to save your engine and performance.
Hey man I had the same issue you had with the right side tube bending. I figured out a solution I cut that tube in half where it was bent and went to home depot and got a copper L fitting and two additional band clamps that way it can bend an have free flow. It was about 10 bucks.
That’s so funny. I actually stopped on the way home tonight and picked up a 90 degree bend for it. Good looking out!
@@Rythecarguy haha NP this is such a great alternative compared to the jlt catchcan although its less invasive and mounts in mid air. Its also $150 compared to about $20-$30 from Amazon.
Love your content. I just installed Detroit Rocker cam on 05 gt. The oil cap has alot of vacuum pulling on it and runs bad or stalls with cap on. I removed pass side pipe to intake tube and placed an air filter on valve cover and it runs good. Any ideas why this happens?
06 GT here, I installed the "Powered by Ford" manifold cover,throttle body cover,& matching fuel rail covers. Looks great but Im not sure I could even install this with the covers on ? The car only has 36k miles so would it be a good idea to go ahead and put one on while she has low miles ?
In my opinion the sooner the better. It will help keep everything clean. I had my heads refinished and wanted to keep them as clean as possible. This is probably the best way to do it.
apparently you can no longer get the strut tower brace
hi i wanted ask you about oil pressure on a 2005 mustang gt 4.6 the oil pressure gauage on the dash it goes up to like 3/4 the way up on the dash it runs there i hooked up a real oil pressure gauage when u first crank it up it goes over 60 psi and when it operating temperature it goes down to 15 psi there is no low oil pressure warning coming on it never has also when u do the systems check it says the oil pressure is ok when you pat the gas it goes up like it should it just at idling its showing 15 psi and the dash gauage is showing its over like 3/4 on the dash it stays there all the time as long as the motor is runing it dosent come down any till u shut the motor off i ust motul 5w30 engine oil if u can let me know i appreciate it thanks
Hi , I just watched your video where you replaced the timing belt on the TT, I had mine replaced and right after it started throwing a bunch of codes (overboost, pressure drop near DV etc). Do you know how that might’ve happened by chance.
How often do you need to empty those catch cans? Thanks.
If you are just putting them I’m I would check in 500-1000 miles just to see how they are doing. You should only have to empty them when changing the oil but each engine is different.
worth it?
100% easy to install and keeps your intake clean