✔ Tutorial how to BSI reset step by step on Citroen and Peugeot
HTML-код
- Опубликовано: 30 сен 2024
- BSI Problems and reset procedure.
Don't buy a new BSI (Body Systems Interface or Body Control Unit) for your Citroen or Peugeot until you have read this and tried a factory reset first. Very often the reset will solve a multitude of problems especially the ones that suddenly happened after you fitted a new battery to your car or the ones that just 'appeared' form nowhere!
- Economy mode active?
- Wipers stopped working?
- Central locking gone mad?
- Windows stopped working?
- Indicators and lights doing their own thing?
All of the above can be caused by a nutty BSI and often a reset is all it needs so try this....
Put the driver's window down, lift the bonnet and ensure all equipment is switched off (stereo, lights, wiper, etc)
Ensure all doors are closed and remove key from the ignition.
Wait for 3 minutes, disconnect the vehicle battery and wait 15 seconds.
Reconnect the vehicle battery, wait a further 10 seconds (do not open doors).
Switch on the side lights through the driver's window.
Switch on the ignition and check system's functionality.
Hold lock button on key down for 10 seconds.
Remove key open & close door test central locking system.
Start the engine and complete the system's check.
Failure to follow this procedure could result in incorrect operation of many BSI related items.
Tutorial how to BSI reset step by step on Citroen and Peugeot.
Tools needed:
rover.ebay.com...
~-~~-~~~-~~-~
Please watch: "Tutorial How to P0325 Knock sensor replacement"
• How to P0325 Knock sen...
~-~~-~~~-~~-~
This looks more like some dark magic ritual, but worth a try.
Thanks for the video.
Amazing .. now at 75 years young I will need to view your video a few more times to get the hang of what to do. excellent video .just the right speed for Old thicko's like me .
Thanks very much 👍
And me👴👍
Thanks. To paraphrase Arthur C Clarke, "Any sufficiently complicated reset procedure is indistinguishable from voodoo. "
Sufficiently? This is braindead. I had a weak battery and now I probably have to pay a 1000 euros to get someone to fix this pos car that cost 2000, just because of a weak battery wth.
This also works if you can’t lower your window, you can do it with 2 people. 1 outside who disconnects and connects the battery and 1 inside to do the light, ignition etcetera
CONGRATULATIONS!!!!!!!! On my Citroen Xsara VTS the central locking works again. Several technicians, proposed various solutions. The final one was to replace the BSI and the ECU!!!!!!!!!!!!!! Thanks again
👍
Would be nice to know why the BSI unit needed a reset in the first place but very good video all the same
Try to use logic next time. Probably because of malfunction of the BSI...
@@Alonz3 i get
I get that the BSI unit malfunctioned, what i should have said was, what was the fault or problem that caused it to require the reset
Does not matter now, was 2 years ago
I've currently got a fault on my Peugeot 3008 where the BSI has malfunctioned and is causing the battery to drain completely overnight (something isn't being told to power off by the BSI itself). Peugeot want £700 to fix it so I'm going to try a reset of the BSI and see if it fixes the drain. Apparently the BSI can go wrong when you have a battery replacement or even a new key synced to the car!
@@jonj488 hi.
Did it work?
Thanks very much!
Peugeot 308 1.6 hdi (2013),had problems with radio, Bluetooth, park sensors and power sterring since my last general inspection.
And this worked like a charm!
Thank you
Great 👍
Your dealership obviously didn't do their job properly.
325 Comments on a very helpful video. Kinda cringe worthy that ONLY 5 of those reply's are rightfully thanking the poster for his contribution but the other 320 free loaders have treated him like a Free Peugeot Help Line with no mention of the video whatsoever. You people need to stop taking and start giving. The Comment section is where the content consumers can leave their thoughts about the video not bombard the content creator with your car problems when you can't be bothered googling them yourself. Props to the poster as he's gone above and beyond by answering a huge chunk of your personal car problems, no doubt costing him countless hours of his time. People are so self important these days 😡
Josh Brookes thank you very much.
My car has problems can you help! Lol 😂
A big thank you from me for posting this video, my cruise control wouldn’t work properly on my Citroen dispatch and it was driving me crazy, I followed your instructions and now my cruise control is as good as new … thank you 👍👍
Great, thank you for the positive comment.
sounds like you made it even worser
A few weeks ago, I asked if the BSI reset might cure my Citroen C3 fuel gauge showing 2 bars and Still 2 after putting in £20 of diesel and then it would count down till zero range. I did the reset and IT WORKED!!! Can't thank you enough. Peter
Great! 👍
Hello sir hope you are ok , i wama do this to my peugeot 308 T9 because there is a engine check light keep coming up ? Do i have to take 1st negative terminal or positive and my car is keyless so hopefully it will work for me any advise please ?
Hi, it will not work for the engine check light.
@@WhatTube thanks for your help
Hi, Great video - will do you know if it will work on a 2004 peugeot 206 cc the central locking has gone haywire!
Any news on your question?
Ma questa procedura va bene anche per c3 del 2003
Hi, yes it should work on your car as well.
Dude, that's my car! 😂 I'm certain of it! It's now got 169k miles and still going
Nice 😄 good to know 👍
Hi, in my case display is flashing, any buttons don’t work. Will it solve this? peugeot 308 2009
2 years ago on my C4 mk2, when the RAC connected jump leads and removed the red tag on the battery positive to make sure the leads were connected... This action of connecting jump leads and removing the positive caused the fault to sound the alarm everytime the doors were locked with the fob, I had to lock with the secret key to stop it from happening. I tried some of this, door closed, window down switch off disconnect battery. reconnect battery and then press lock button, there is no key ignition only a fob start button, but when I did that the alarm immediately sounded. This method did not work on the new C4. I had Citroen do it they said they uploaded a new BSI software to fix it.
To clarify, removing the battery positive with the engine off, did not cause this fault. The fault only occurred when the RAC had charging cables attached but also at the same time disconnected the battery. I think this is what caused the fault.
It's always better to remove the negative terminal first.
If the battery needs to be charged remove completely the battery and charge it.
This method is working on the C4 as well but in your case the RAC mechanic damaged some components that's why it didn't worked for you.
I was hoping this would reset airbag light on my mk2 c4 grand spacetourer but now I'm not so optimistic
I had this same problem with my 2016 grand picasso, I sat in the car started the engine pressed the mirror button to close the mirrors as if locked , turned engine off and left the car and pressed the key fob and the system had reset not had a problem since .
Hi I have steering fault showing in my dash and the steering is very stiff. I managed to find a fuse that was blown and I replaced it. Yet it is still same and same fault on dash. Do you reckon this will work in resetting it?
Hi, have you checked the fluid in the steering rack? And check also the wires that go to the steering motor as well.
How do I know if the bsi is actually reset or not?
Interested
Hi, I have problems with BSI intersystem CAN network, could Spy esp /abs Service solve it on my 208 year 2015?
Hi got a citroen ds4 where the automatic tilting mirrors when reversing have stopped working. Would this help?
Can I use to 207 1.4 i benzin ?
Yes
Thanks for video. Problem I have is that the lock button on my key doesn't work (I just lock it manually). Is there any way I can perform the BSI reset without doing the "Hold lock button on key down for 10 seconds." bit? Thanks.
Yes, just skip that point.
@@WhatTube 👍 Thanks, will try that.
@@MrWibble
Hi , did the bsi reset worked for you even you skip the holding key lock button step ?? Because for me its the same case i have no central loking at all neither from the key nor from the lock button
@Wipols Walid Didn't try in the end as someone I work with suggested this - 'Switch lights on & disconnect the battery & leave for a while (I left it for about an hour) to totally discharge the system, then reconnect'. That worked for the problems I was having (no speedo/odometer, random engine management & PS lights & horn operating by itself even when car was locked & I was no where near it!). I guess it's basically the same sort of thing as the BSI reset process in the video. Hope this helps. :)
@@MrWibble
Thanks for the reply ,i understood that you followed the steps as in the video except you skip the holding lock key step , i wanna tell you also that i checked the bsi today ans it seems to be damaged and need to be replaced by another one also reprograming the new one too also get th key pin code from the damnaged bsi , i'll try this method ans escape the key step if it doesnt work i have to change the bsi or put a new lock system
I have a Peugeot 308 II 1.2 puretech 2015. What do I do if I have start stop ignition and I can't insert the key into the ignition lock?
Thank you so much, just got my first car (Peugeot 2008) And then trunk wouldn't open on my second time driving, tried doing the BSI reset as recommended by you and it WORKED, thanked you so much!
Great 👍
I hope that tips help me to solve the problem with my central locking system. I can use my key fob to lock and unlock car in short time after turn off engine. But if I wait more than 10min there is no respond. Open car with key (turn the locker) ,start engine and after that key fob works as it should but only in short time
Hello, I have the same exact problem on my Citröen city C3 2011 (1.1), did this solved the problem for you?
Hey guys! Im having issues with my pegueot 207 (2008) where the instrument panel/dash lights start flickering, sometimes doesnt turn on (headlights and stuff work fine). Anyone else had this issue and could this method be a possible fix? It usually happens after the car has been parked over a period of time.
Hi, it looks like the issue is the battery itself, next time try to start the engine with the clutch pedal down and all the electrical things off (lights, stereo, ac, ...)
Hi Had the mechanic check my 508 today it showed a fault in BSi he checked the fuses it doesent have any faults just the engine fault shows up when I start the engine the goes out but servise light remains on would the reset fix the problem do you think? I did change the battery with the key in
Hi, the 508 has lots of BSI related issues, the best it to try the reset and see, but I don't think it will reset the service light.
Thanks for your help Sadly didnt work might give it another go
Worked perfectly. Thanks for the simple fool proof step by step video.
Thank you for the comment.
I have a C4 Grand Picasso 1.8 petrol. The car works, but the engine power and acceleration are low. I checked everything in the engine equipment, timing, ignition and fuel. The exhaust system and catalytic converter are clean. The air filter is clean. Can such a BSI reset also reset the engine ECU? I have a problem - I have a car from Great Britain, but the steering wheel is turned from right to left - which doors I should not open during the reset. The lock in the right door locks and unlocks the entire car - previously it was the driver's door - now it is the passenger door. The lock on the left door only opens the left door - now it is the driver's door - when the car was in the UK it was the passenger side.
Hi, the bsi reset will not reset the ecu.
Ask a friend to help you and he sit inside the car and you stay outside so this way you don't need to open any windows or door.
What is the reason to reset BSI?
Without going into too many details. Consider this the equivalent off resetting your PC... In fact it's exactly the same! ;-)
Worked for citroen c3 that had problem with electrical devices on stearing wheel such as indicators lights and odemeter and fuel gauge. Spot on easy fix
Great! 👍
I've a 2017 C4 1.6HDI. All needed to do, when the car was shut down and off, was disconnect the battery for a second and reconnect. 3 minutes to re-boot and my central locking, and key fob non recognition all sorted.
Great video ... my engine cuts when I am driving along ... I get all sorts of alarms come up on the dash .. then the engine completely stops .... I turn the ignition off ... wait 15 seconds, then it’s start back up straight away .. any ideas ??? Would be most great full....
Hi, have you done a diagnostic scan?
Did you solve this. My 308 is doing the same thing
Did you ever solve this. Mine is doing this now. Thanks
@@martinedwardfleet My 207 HDI as started doing this, dangerous. I'm just looking into getting Peugeot planet 2000 and give it a scan
I did everything but radio is still not working, any idea? It stopped to work by battery change...
Depending on the vehicle you may have to insert the radio code
There is no option to insert any code, after i do reset, there is nothing regarding radio on display
Very useful. Used to do this to cure my C5. However, I was told to put the side lights on before reconnecting the battery as they would then absorb any voltage spikes which may be caused if the battery terminal doesn't make a clean contact.
I can see how unclean contact of a battery terminal may lead to voltage dips, but how could it casue voltage spikes?
@@YS_Production as the battery terminal is replaced, the circuits pick up the voltage. If the terminal makes a series of contacts as it slides down the post, the contact will 'make and break' giving dips and spikes which sometimes can be heard as crackles or even seen as sparks. Even if the spikes are less than battery voltage, the processor may be damaged. I was told too that if there is any induction in the cars circuitry, then a falling voltage would produce a back emf which could be larger than battery voltage. I am just going on advice and explanation I was given myself. It always worked for me though!
@@YS_Production.
Sidelight? Blinker, orange light on the side of the car? That is not what he is turning on in the video. He is turning on the original front lights?
Does this also help on 2006 c4 xsara Picasso?
I'm asking because I tested a display from another xsara Picasso and now my mileage is off. I just tested the display and put back the original one and somehow now the car took the mileage of the other display. The old display has 218000+ on the clock while my car is supposed to have 141000+. How do i get my original mileage back? 😢
Hi, yes it does work on your car as well, but it will not fix your issue, you need a specific diagnostic tool to correct the mileage.
There's another cause of non-start and ECO-MOD display. If you replace the Key Shell, you must also locate the key code chip in the old shell (a little black chip in the corner, easily missed) and move it to the new shell.
Peter D Morrison
That is true, without the transponder chip the car will not start at all. :)
does it need to be re-soldered to the new chip?
No, the transponder chip does not need any connections, it can be easily removed with just the fingers, sometime can be dropped accidentally .
Thanks for the info, I changed the shell of my key today and not a hope would the car start, I didn't even notice the chip, it's starting now after reading this comment, thanks man
some times the chip is part of the door remote control an does not have a separate chip on the mrk3 type c5
@@WhatTube
Hi I have C5 from 2014. Automatic and multimedia is not working, previous owner said that car was to long without battery. Is it possible to restart it same way like on your video? Thanks!
Hi, yes you can reset the BSI, but if the issue is not with the BSI you should find the problem first, fix it, and then do this procedure.
When need this to do it?
Hi,
I been having problems with my peugeot 308 sw 2008 1.6 THP feline.
When i driving the dashboard act crazy all the light turning on and abs en esp came on and stop warning, the navigator turning on and off and car start to shake stubborn cooling fan come s on . Will this help me of i have to reprogram my bsi by the dealer in case?
Hi, it's definitely an electric fault, looks like the water is entering into the system.
Try to remove the fuses and check if there is corrosion or presence of water.
If there is water presence in the bsi, most probably you need to replace it.
Thank you for your "how to.." . If the driver door is on the left side, which door and door window will be opened ? the right passenger door or left driver door?
Hi,
The driver side (left in your case)
@@WhatTube wie ist es mit keyless? 😢
Best reset: never buy a citroen. I had several new ones. Besides the annual maintenance i had to visit the workshop 8-10 times a year(!) for small or major problems, recalls etc. Never ever again.
Yet you had several..
I just pulled the shunt fuse for a few seconds and it's fixed. Thanks
Great!
😂😂😂😂
Which fuse?
Hi, thanks for the video!
On my P5008 (2012, Petrol 1.6THP, Left Hand Drive, 7-seats) I have recently only the following lock/unlock problem and only during winter: while pressing the lock/unlock key button, the car seems to get the signal (because the led [P] on the parking lever turns on) but the locks don't lock/unlock. Everything else works fine and even lock/unlock problems disappear when weather gets warm. So, I assume my lock/unlock problem this is because of cold weather and humidity.
Can you please advise which components or cable connections are prone to humidity or watertightness issues?
Thank you in advance.
Gregory
Hi,
Did you try to replace the battery in the key fob?
@@WhatTube Yes, but with the same results.
Ok, you can start by cleaning the car battery's poles, then clean all the main cables attached to the chassis (negative).
Then remove, check if there is bad connection or corrosion and reinstall all the fuses and reles.
@@WhatTube Ok, I will do.
Besides, I would appreciate much if you could also advise where I should check for any exposed cables or cable connections, regarding cables routing from or to the BSI.
Finally, please let me kindly remind you that the malfunction I have described above happens only when locking/unlocking the car and only during winter.
Thanks again!
Hi Gregory, could you fix it? I have the same problem
Recently I gave the car for painting the front and rear bumper after returning it turns out that the main display from the clocks and the automatic brake do not shine. The car is Citroen C4 Picasso 2013. Do you know what could be the reason, and can your BSI video help?
If you have parking sensors, check the connections.
You can try to reset the bsi and see if it works.
Thanks for watching and for all the LIKES.
Important: Please DO NOT disconnect the battery while the engine is running, follow the steps one by one.
Thank you very much!
Excellent video. Please continue to post more videos.
I have a question regarding disconnection of the battery for post 2016 Peugeot 308.
According to the manual, it says before disconnecting the battery, the doors and windows should be closed and wait 2 minutes before disconnecting the battery.
I guess this is to put the BSI to sleep. However, I have seen many instructions including this video to leave the windows open so that the side lights can be turned on. So I am not sure if the newer models BSI are detecting the state of windows open or closed position. Any thoughts? Thanks.
P.S. The peugeot 308 manual for 2016 model can be found online.
L Emech thanks,
You need to open only the drivers window, if you don't leave it open before disconnecting the battery you can't reset the BSI and you can have various electric problems.
Even the older BSI can detect the windows but if you wait few minutes the BSI enter in "sleep mode" then you can disconnect the battery.
I hope that is helpful.
If you have more questions let me know.
Thanks.
Thank you for your kind response. I guess what I am not clear with is:
1. What is the difference with closing the doors and windows and after connecting the battery, wait 3 minutes then open the door to reset the BSI versus, leave the windows open and turn on the lights to reset BSI. I thought as long as the door is open after connecting battery, the BSI will reset. Or should a higher current draw be needed, then open the door followed by turning on side lights.
2. Is it necessary to always do a BSI reset after disconnecting the old battery and replacing it with a new battery? Or, the BSI reset is carried out only on a need to basis like there are problems with BSI.
Thanks again.
L Emech
1. If you close the doors and windows then reconnect the battery and wait 3 minutes, then you open the door, in this case you are waking up the BSI by multiple functions (doors lock/unlock, door light, interior light, dashboard operation, ...)
If you open the windows and after reconnecting the battery you switch on the light, you are turning on the BSI with only one function, so th BSI can't be "confused" by multiple operations.
2. Is better to do it every time the battery is changed but is not essential.
WhatTube Excellent! It’s all clear now. Thank you very much.
Will this work on a 2002 C5??
Hi, yes it will work on a 2002 C5
Perfect. Will go on and do it 👍
Oh man the driverseat is on the wrong side :)
Pimp Dumbel
Hi, I live in UK and here all cars are like this :)
Walk to the otherside !
It is on the right side
side lights through the driver's window
John Timbs kindly tell me how to deactivate red stop light in peugeot expert 2017
3:38 Does not work because window goes up with closing mirrors.
Didn't really believe this but i had a fault with my Expert van, one rear indicator had no power getting to it.
Carried out this and now works perfectly,thanks alot !
Your welcome 👍
How did you access your battery inside with all the doors closed? Did you just stay in the van?
Faaaaantastick!!! Thank You thank You, good man!! Two days I was looking for problem, couse I could not start my Partner '06 2.0hdi, and after this reset it's ALIVE again!!
May the force be with You!!! 😂 TY for this video!!
You're welcome.
Happy to help 👍
Thanks for this worked on mine. Wish my engine looked as clean.
alberto ascari, I'm very happy that worked, thanks.
And my engine is not that clean outside (but inside is very clean, check my other video where I changed the engine oil and you will see how clean was the oil).
Thanks again 👍
@@WhatTube My wipers and lights turn on by themselves will restarting help?
Hiyah, @whattube , would this help if my car alam starts to set off after jump starting . Mechanic mention about my car BSI (Pegeout 308 2015) ? I started to remove the battery terminal as the alarm just sets off if I leave it. (Doors and windows all shut)
Hi, you can try to reset the bsi and see if it does work, but if there's something broken or the electric connection is damaged then it will not work.
Hi my windscreen wipers on my ds5 have stopped working after them being disconnected to replace front struts would this procedure help get them working again, thanks
hi what tube. nice video. i want to reset my 108 as i want the car to learn my style of driving and not the previous owners. (im getting rubbish MPG) would this work on a 2017 peugeot 108. and does it indeed reset all previous driving habits. thank you
Yes it will reset it.
But if you get bad mpg it can be some other issue.
@@WhatTube what other issues for pegeout 108 could low mpg be what tube ? thanks
Thanks it worked!!! You saved me a stressfull day
Thank you for watching.
This turn off economy mode?
@@zuikispuikis6039 - "Economy mode" automatically turn off the moment you start the engine. BTW "economy mode" is set to safe guard the battery.
So, it turn off interior lights, radio, etc, etc! Just to mention the most obvious things the driver can see/hear.
Really, can't be simpler than that... ;-)
Wow!! Excelente tengo una 3008 Gt line y no me funcionaba el acceso a manos libres y me indicaba que no detectaba la llave, y con esto quedó totalmente solucionado!! Muchas gracias por tu video eres un genio!! Y de paso sabrás cómo actualizar cartografía latinoamericana a este modelo ??
Thank you for the comment
This was 2018, and it's still good!! Got a Peugeot 308 2015 1.2ltr Allure, one day it would not even turn over, much less start, worked out it was the battery, went and changed the battery, and saw BSI on it render the audio screen frozen, non-communicative, after about five seconds. Would mute, no button pressing, nothing, change the screen. Absolutely peed myself, wondering what it was I had to do, on m own. Got onto YT, searched and found this video, it seemed compatible, gave it a go, followed everything, and it worked a treat!! Thumbs up.
👍
You say put the drivers window down but what if that is one of the problems like you have said above (Windows stopped working?) So how can you do the correct procedure and reset the BSI?
Hi,
You'll need another person that sits inside and you can do the outside part.
@@WhatTube Thanks I will find some to give me a hand on that.
Thank you very much for this video. Followed the steps shown. Am absolutely delighted to find the door locks/unlocks again when I press the remote for my Peugeot 407. Thumbs up and God bless.
Great!
Thank you very much.
This worked on a 2012 Grand Picasso I couldn’t start after fitting a new battery. I disconnected the positive, as the negative is hard to get to once the battery is fitted. Weird that you have to do all this, but it worked - thank you. The only issue now is my interior fans are stuck on full blast, but at least it’s now running. If anyone knows what to do about that, please let me know.
Hi, for the blower fan inside, the issue is the resistor, try replacing it and it should fix this.
Thanks a lot !
This is indeed a realy helpful video ! 💪🙏
Thank you 👍
Hi my citroen grand c4 picasso 2015 automatic gearbox start/stop key.. Alarm goes off when pressed locked on my key.
Отличное видео, спасибо автору. Будет ли это работать, если у меня ключ-чип? Полагаю, что я не смогу зажать кнопку закрывания двери, когда ключ находится в слоте. 5:25 5:25
Hi
Does this method removes messages
From the computer: for example depollution system faulty.
I replaced EGR and the error stayed. Peugeot 307 lift 1.6 hdi 90km
No it doesn't
I have the same damn fault with my 2008 308 1.6 petrol its running like a bag of shit and the engine management light is on then when driving flashes and goes into limp mode
Hi, I have my Citroen C4 Picasso. After Halford changed my battery , my ECO started to have problem. When car is working on Eco, when I stopped on traffic light or at all then engine is cutting off. I need to restart car manually. But when is ECO is off, car in running well.
Halford found some faults and one come up like BSI . Can I reset it myself?
Regards
Hi, yes you can reset the bsi yourself by following the simple steps shown in the video.
Excellent video ,seems a very unusual way to reprogram fob but worked a treat . Thank you very much for posting.
👍
It's seems to fix a fob you need a car that can start?
utter nonsense! Don't disconnect the battery while the engine is running as the voltage spikes from the alternator may blow electronic control units - very expensive!!
Hi, you do NOT have to disconnect the battery while the engine is on
You're a legend for posting this, it worked like a charm thank you very much!
Great! 👍
What worked? His car could start?
Hi, brilliant video but before I perform what you done, would this fix problems with the ecu? There isn’t really any specific error codes for the ecu it just says that the ecu has a problem as it is cutting my power when the turbo kicks in. My cars a Peugeot 208 GTi 2015
The BSI it's like a second ECU so you can try it and see if it solve the issue.
I left the light on in my 2010 berlingo and now it beeps every 15 seconds even when the ignition is off. Everything still works. It's just so annoying. Any ideas?
Hi,
Do you have the navigation system whit the display?
If yes I think is that one.
Wow its like being indiana Jones figuring out a puzzle
👍
Hi I have a strange problem with my 2007 207 1.4 s .. I park up and walk away from the car with my keys and then maybe 10 minutes later my car wipers are going and heads are on. Open the door and it stops. Any help or advice would be great thanks .
Hi, most probably you have a corroded BSI unit, you can try to remove and clean it with isopropyl alcohol.
Hi there Clair as a Peugeot technician I do know there is also a TSB bsi software download for that very problem. Get someone to check for water ingress first as per the whatube comment.
Hi I have the same kind of problem can you please tell me how you fixed it lplease Thanks Kennny
I have the Peugeot 407sw 2.0 hdi 136 & the key fob just stopped working, (not fob battery) have tried several times so called fixes & none worked, so will give this a try, thank you for upload 👍
Thank you 👍
Hi.
Did it work?
@@tonypaddler No, PCB inside fob had broke, 245 euro for new from dealer
Hola, how reset the BSI to Ds3 THP 2011?🙏🏻🙏🏻🙏🏻🙏🏻
Hi, it's the same method.
What I want to know is who came up with this method. And how did they work out the sequence?
It's the ridiculous french car engineers
I wonder if there is a similar procedure for a Peugeot 2008, year 2014. I did my best to follow the steps hoping it would get rid of ABS warning lights, Battery charging faults reports, Power Steering fault, Anti-rollback system fault and occasional jerky car engine errors but nothing changed. Maybe I was asking a little too much and the car is broken properly! I also tried the short-circuiting of the positive and negative terminal cables with a wire when they had been removed from the battery. I still get the same beeping and multiple faults on the dashboard. This car randomly stops indicating how fast I'm traveling and also randomly turns off the power steering while in motion. The GPS occasionally stops working properly as well. Any ideas?
This reset works for your car as well, but seems like you have a different issue like damaged wires or bad connection to the ground, it can be a different faulty part as well.
Jajajja, Le falto lavar el carro en luna llena y frotar la lampara de aladino. Babosos!
Hi, my Peugeot 307 instrument panel after replacement shows 999999 as millage. Will this method help?
Hi, no it will not work, you have to change the mileage with a diagnostic scanner.
Thanks so much this. Super helpful, and perfect for just going along with.
You're welcome 👍
Does this help with a Peugeot 207 cc convertible? I've got a new battery but my windows aren't rolling up after having roof down, I have to turn the car off or on again to reset the windows...
Hi, trying is the best you can do.
I will try this on my Peugeot Partner, but to be honest it all looks a bit silly and made up.
👍
WOW, Great VIdeo, Qestion: I have replaced my Dash screen with old one from another car where the mileage was 222000 km, (mine was only 140k,) than replaced just the screen leaving my own electronics in the dash panel, but the car is still showing 222000km on the dash. How is it possible that the car remembered the higher value of spent kilometers from the other Dashboard and not my real ones? will this solution get back my original 140 000 km? Thank you Citroen c4 2007 1.4
Thank you, behind the screen there are some small chips where the data is stored, you can change the total reading with some good diagnostic tool.
Resetting the bsi will not change the kilometres stored.
My reverse light has stopped working, changed bulb still nothing, do you think this could rectify the issue? Mine has the EGS semi auto box Citroen C4 2009
You can try it maybe it will fix it.
If both bulbs aren't working then check the reverse light switch.
Un reset du bsi peux régler mon problème de GPS plus de détection satellite
Good video. Got couple questions a) Can you disconnect the battery at either the positive or negative terminal. My battery negative is hidden well inside the bonnect, can't reach it without taking out the whole battery.
b) do you think this reset might be fix fault that flag up in the system when you initially start it up. I have had Eco activated, Engine needs repair, gearbox fault and parking brake fault all in space of a week when I start car initially
Hi thank you.
a) yes you can disconnect the positive terminal.
b) the Eco mode might get fixed, for the others you need to check for any faults stored in the ecu.
Hi
I did the rutine but after the car will not start. Does anyone have clue what to do?😢
Got a Peugeot 307 from 2002.
Hi, does it have any error codes?
C4 grand picasso 2008, 2liter, petrol . Not possible to start engine cause (robot) automatic gearbox needs a brake pedal to be pressed. Should i use a stick to press the break? Or this hack is kind of manual gearbox matter only
Hi, you need to start the engine only at the end, if it's automatic you can just turn the key on and check the other things without starting the engine.
hey, could please help me my citroen c5 2005 screen doesnt work at all it only works when it is extermely hot
Hi, it can be an earth connection or other electric issue but there are two main possibilities, the display is faulty or the ecu is damaged, this is allocated on top of the cd drive under the dashboard.
I dont have lock/unlock key, just regular key. What to do?😢
Hi, you can still do it, just skip that part.
is this guaranty BSI thing to work or do you have to do it a couple of times, also if the front window is broken by the BSI am I done for.
My c4 picaso (08) is not working stil, cabin fan is still on ful time….but nice video
Hi, if the blower fan stays on all the time check the resistor.
How to start engine on MCP transmission? Need to press brakes. How?
Hi, just skip that part.
I might try this I have a eml light come up on the display every time I drive away and service light pops up I took it to Peugeot there was fucking useless the code is a secure configuration fault I don’t think these numpties knew what to do they wanted to strip the car and investigate my turbo charger heat exchanger and air inlet manifold
'Coyld be needing to follow this drill on my 66-plate 1.6HDi Berlingo van. My Screenwashers are still inactive despite replacing a blown fuse ('tested the power-feed nr the reservoir pump).
Yes, you can try it, did you check the pump itself?
My small display above my radio Said ecomode active and has no light,first seconds i turn the car on the light comes but it blinks it dosen’t stay on i have a Peugeot 407 coupe from 2006 can your metod deal with that also?
Hi, it's sound like a flat or bad battery, try to recharge the battery first.
@@WhatTube my battery is perfect and the charging is also Spot on!
Hello, I have a Peugeot 208, and the car don’t find right any radio stations and don’t memorize the window elevator, this could solve that?
Thank you
Trying is the best thing to do 😄
That work on xsara 2003 after facelift 1.6 tu5jp4 engine??
It should work
Hi thanks for the info my c2 has antitheft message everytime I get in car will this procedure work ? Also do you have to disconnect the negative side of the battery ? Because positive side is just a clip
Hi,
Try to use a different car key.
You can try this reset maybe it will fix the issue.
And yes you can disconnect the positive pole of the battery if you want.