Salut Adrian! Am schimbat radio cu un ecran de 9 inch cu tot cu mască cu android 12 două usb ! Merge bine ! 307 sw 2.0 hdi 136 cp cap serie cu toate imbunătătirile cumparat nou cu 22 mii€ pe cind lucram strungar la Bar celona ! In aprilie 2008 azi in iunie 2024 are 188 mii/km fără nici o reparație! O zi bună să ai!
Very good tutorial, I chose to get one of those USB to radio things took about 2 min to set up and I can take my calls easier, save myself half the day. and it has many other uses along with it.
great video! this might be a stupid question but i just bought a Peugeot 308 with AUX already installed, but when i plugged in my phone and used the Source button to select input AUX it said inptut AUX 2 instead of AUX 1 and no sound was coming out. i was just wondering if you may know if i need to reinstall the AUX cable or something?
Mine is like that PLEASE let me know if and how it got fixed. I bout an RCA to lightning cable for my iphone hopng it would allow me to connect but I do not get any sound. It is AUX 2 only available. I own a 2011 Peugoet 308 cc. The display screen is orange LED. No usb slots or anything. Much appreciated.
Does diagbox allow you to select aux in as default on the radio? My radio comes with aux built in but have to change from fm radio to aux in every time I turn on ignition.
I already have an aux connection in the glove compartment, but want to add a BT to aux device close to the radio. If I add similar cable to the one you used in this video, would it still need activating, even though the current aux works fine? Cheers!
Hello. Your car already has the AUX IN function activated, so you don't have to activate it anymore. Just plug in the Bluetooth module and it will work fine.
I have retrofitted my 207 with a RD45, new display, microphone installed in the roof. Everything works great except one thing: The audio settings in the menu are greyed out, cannot select them. Do you have an idea? Will I need a diagbox to activate it? Would not like that...
Yes, when upgrading to an RD45, you need to reprogram it. I assume you had an RD3 or an RD4 previously installed. Fortunately, doing such a thing at a qualified Peugeot mechanic doesn't cost much.
I got an RCA to lightning cable for my iphone 13. I had the AUX 1 and 2 enabled but no audio works. I checked the cable on another stereo so the cable works but now I have no idea what to do next. I plugged into the RCA slots in the glove box and other end into my phone. I have checked volumes and bot AUX 1 and AUX 2. Any ideas please.
@@AdrianDragan I did, I think what has happened is the previous owner installed a PARROT hands free phone kit and it got connected to the radio so the RCA slots are not operatable now. I will need to unplug the parrot and see what is going on.
Hey Adrian, your videos are great, they helped me a lot. Did you ever had an issue with activation of AUX2 in RD4 from 2012? With Lexia I can change input from mode missing to reserved to kml/nomad. My original handsfree radio works well, through aux1, but i also want to actvate AUX2 to use aux cable from headphone jack. Lexia works well because when I am changing aux1 from kml/nomad to conventional, I can choose aux input on my radio, but I i have still missing AUX2 when changing source of my radioreceiver.
Hello! I have a Peugeot 407 with the RT3 radio. In the glove box I already have the video rca, so I just purchase the audi rca cable with a 3.5 jack in the other end and I am able to use it only in the video mode, so it doesn't work when I'm driving. After this, it's only necessary to activate the aux through the Diagbox and that's it? Or is there anything else to do? Thanks a lot for the help!!
Hello. I'm sorry, but I don't know what the steps would be to enable AUX on this RT3. However, try to activate AUX IN audio using Diagbox, you may also have to connect the cable to the radio jack in the dedicated audio aux in port.
How do I know if AUX is activated? Just bought the car and when I select source I can choose from radio and aux. That means it must be activated right?
Hey Adrian, I recently bought a 207 Sport. I tried to connect with the aux port but it didnt work. Then I bought a 12-pin aux cable and installed it like you in this video. The aux 1 input was already activated when I bought the car but it still doesnt work. Tried with two different phones (iOS and android) but there was no sound coming out of the speakers. Could it be that the radio is faulty? Also, the seller I bought the cable from said it works for 207 RD4 from Bosch, but my RD4 is from Continental. Could that also be an issue?
Hello. There are two AUX IN. I think your cable is configured for AUX 2, I don't think the radio can be faulty. One more thing: did you say that you already have AUX IN activated, you don't have two RCA plugs in the glove box?
@@AdrianDragan Thanks for the reply Adrian. Yes, AUX IN was already activated (I bought the car used) but I dont have two RCA plugs in the glove box. Only one AUX IN in the middle console at the bottom, next to a USB port. (just behind the gearshifting stick). But that AUX port didnt work, so I bought the cable. When I press the 'source' button on the radio it changes between radio and AUX IN 1. So I did the same like you in the video. (same spot for the 12 pin connector) I am really clueless atm.
hello so i just did all this but when the diagbox is connected and i go to radio menu it works perfectly just like in the video but when i disconnect the diagbox it seems like the radio is deactivated i cant turn it on anyway and when i go to menu screen with the multifunction screen audio setting is like creyed out if that maxes sense. i have also tryed to disconect the aux and revert the change in ecu but the problem percists. any help would be apreciated.
It Would Be Interesting a video of how to install an interface to use the steering wheel controls and recover the computer on board in Peugeot 308. Thank You for your work
Hi, Thanks for suggestion, I'm going to do a tutorial in the next few weeks. However, you do not need any hardware interface, just activate the Diagbox software option to adjust the clock and display settings with the steering wheel controls.
Wow, really?... So you're saying that I don't need additional hardware? If that's the case, then that is awesome! Because, I read on forums that said that an aftermarket module/hardware, called "PC99-X44" (X44 being specifically for Peugeot) from brands such as «Connects2» or «Autoleads» should be bought, in order to do that very same feature... And that bloody module costs like nearly 100 Euros/90 Pounds!... My car is a 307 SW (2006)
I brought a bluetooth thing u put in the car cigarette lighter socket much easier but the only thing u got to do is pair it with bluetooth with your mobile phone
Hola que tal ? Le quería preguntar , que color es el cable del mando del volante que sale hacia la radio , a mi c4 le he puesto una radio y solo me falta saber el cable (kay) para empalmar lo un saludo
Hola. Si tiene cables de alimentación dedicados para su automóvil, también debe tener un decodificador canbus detrás de la unidad Android, luego realice la configuración correcta en el menú canbus y los controles en el volante deberían funcionar. Mira aquí: ruclips.net/video/apJts9HvIfg/видео.htmlsi=MKO5m3LqfodvD33r
I have a question, if anyone could answer it would be helpful. I have a Peugeot 207 and I want to do the set up for the aux cable. Is it necessary to do the part with the diagnosis? I mean will the aux input not work if I don't change it using that software in the video?
hello i took the radio out and there was already a socket in the place. It is all wrapped in tape so couldnt find where it went do you know what its for? no aux anywhere else in the car btw
Hello. Remove that socket from the large socket. That socket is for AUX IN equipment but was not installed at the factory, so it is unusable. You can plug the plug into your cable instead of that white socket.
I've gone to do this yet there's already a cable in the space you mentioned 😬 and the plug doesn't fit the other side. What's that cable there for? Any workaround?
@@attaradio2724 yup worked absolutely fine, haven't noticed any effects from the old cable not being there either, everything still works (steering wheel controls etc).
Может кто подскажет,как подсоеденить магнитолу другую эту оставить??? в роли(бортовова компьютера и разных показаний а другую использувать как музыку хорошую с усилком
I bought a 2009 Peugeot 308 with RD4 radio and the previous owner had already installed the AUX cable. I connected my phone with Spotify playing songs and it plays fine, however the controls behind the steering wheel don't work. I can raise the volume from the radio knob, but not from the controls behind the steering wheel, and next or previous song I have to do it on the phone. You're raising the volume from behind the wheel in the video. The car reads the AUX input so I guess it's already activated with Diagbox.
I don't know why you can not adjust the volume from the controls behind the steering wheel, however when using the AUX IN function thet next or previous song can only be used on the phone.
@@dustraider2940 This is only has the Audio Line In function and you can not control next and previous song. Perhaps with the original Bluetooth Peugeot.
Hello. As far as I know these bluetooth radios are only for calls and cannot be used for streaming music, most likely you should replace the original radio with an RD45 that has a built-in bluetooth module compatible with streaming music, see in my video: ruclips.net/video/z5D4lsLGwVk/видео.html
Es sencilla la instalacion del dispositivo, yo le instale uno bloetooth la pregunta es de donde sacar el cable y el driver para entrar a la computadora del auto???? Necesito orientacion gracias.
Hi. Does it go where the cd charger from the trunk is connected? I mean, if I connect this, I will loose the 5 CD charger from the trunk of the vehicle? Thanks
Anybody can help me with this problem: When i try to Save the setting ''Conventional'' the program said: Programming Failed. I use Win7 32bit before that i used WinXP buy same error on both systems. Using Version 7.02
Hi all, any idea if it would work if I connected a USB port to the aux cable adapter through the jack. I'd like to listen to my music from my USB stick this way.
Hello. You cannot put USB on the auxiliary input. To listen to music on USB you need something like this: www.aliexpress.com/item/32794355804.html?aff_platform=link-c-tool&sk=Ti3KDXE&aff_trace_key=26a0c2efe81f4fdbbf58f03234be324b-1598984892774-03893-Ti3KDXE&terminal_id=364d159dab6d4da48c68657f8054a5c8&aff_request_id=26a0c2efe81f4fdbbf58f03234be324b-1598984892774-03893-Ti3KDXE ruclips.net/video/52huHY_Q-rg/видео.html
Hi. Thanks for the tutorial but I have a question. If the aux input is already activated (when I press the “input” button on the radio I have the aux 2 option), do I still have to do the second step (connecting to the computer and all that), or is buying and fitting the cable enough?
Hello. All you need to do is replace your auxiliary cable with the bluetooth module ruclips.net/video/NaBDzcwQdZg/видео.html Or you can buy a bluetooth module that connects to the RCA Aux IN jack: www.aliexpress.com/item/32821770160.html?aff_platform=shareComponent-detail&sk=_AN7CU1&aff_trace_key=c6317c96f7ae48bf8b205390025c93e8-1609275238071-02903-_AN7CU1&terminal_id=d92441f0a7b94ef29dcdfc816a4dd068&tmLog=new_Detail
I just received the Bluetooth module from AliExpress for the rd4 in a c2 and I'm going to test it today... From a first look the only difference I can see is that the Bluetooth module also needs 12v from the battery or a 12v rail nearby the radio. I haven't removed my radio to see if it's easy enough but I guess it'll be, even if you don't use a soldering tool to make it look like an OEM's job. It cost me 6.73€ shipping included and I live in South Europe. Took 23 days to be delivered. I'll let you know the results soon.
@@amirbazzi1718 Yes of course. I've installed it and it works fine. I used two Scotch locks for the two power wires of the Bluetooth module. I Scotch locked the red wire with the +12v wire of the radio and the black wire with the radio's gnd wire so as the module gets power same time as the radio. Really easy and took me less than 20 minutes including the aux source activation. The adapter I've installed a.aliexpress.com/_d6GGhHa The locks I've used a.aliexpress.com/_dT5xx9a
Hi, I'm just as interested as you and I think this is, I'm saying it because it has the same number as the device that shows 9780.Z5. es.aliexpress.com/store/product/Lexia3-PP2000-with-Diagbox-V7-82-Software-Scanner-for-Citroen-for-Peugeot-OBDII-Code-Reader-Auto/2924002_32956873787.html?spm=a219c.search0104.3.1.4ced47fa72eWjK&ws_ab_test=searchweb0_0,searchweb201602_3_10065_10068_10547_319_10059_10884_317_10548_10887_10696_321_322_10084_453_454_10083_10103_10618_10307_10712_537_536_10713,searchweb201603_6,ppcSwitch_0&algo_expid=ebeccff7-e33e-4c9a-8f6b-3eeae5363304-0&algo_pvid=ebeccff7-e33e-4c9a-8f6b-3eeae5363304
Hi. The only way is to buy a diagnostic tool and use it whenever you need: s.click.aliexpress.com/e/_DndhTRj You can use the Bluetooth mode instead of the cable: s.click.aliexpress.com/e/_DekrsQz
Hello Adrian, exista o alterare a sunetului folosind aceasta metoda de input ? Eu am preinstalat pe C4 Picasso audio in, se regaseste in compartimentul storage al pasagerului . Se pare ca sunetul nu este la calitatea dvd-ului/radioul-ui. Multumesc.
@@AdrianDragan am verificat si eu ..ai dreptate volumul e mai mic, si da impresia de calitate mai slaba. Ajustat volumul ,folosit alt telefon. Pare ok acum. Multumesc.
Hello. But here I don't show you how to mount a USB cable, I show you how to mount and activate the Aux IN cable. Links: - Aux IN Cable: www.aliexpress.com/item/32870731809.html?aff_platform=shareComponent-detail&sk=_AfcZaT&aff_trace_key=580f19ec45554c948558c7851afcaef2-1608644564837-08634-_AfcZaT&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail - Bluetooth module for AUX IN Audio Peugeot / Citroen: www.aliexpress.com/item/32826594463.html?aff_platform=shareComponent-detail&sk=_Af387Z&aff_trace_key=1e9de9f9912a4083aab181d24053d488-1608644645392-05181-_Af387Z&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail - Diagbox hardware / software interface: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8
Hello! If you disconnect the radio from the power supply you do not need any PIN code, the radio security is based on VIN (vehicle identification number).
hi, I have a 2009 Citroen C3 HDi, I bought your same aux cable. if I press the SOURCE button it says INPUT AUX 1 but if I try to connect the phone and play the music I don't hear anything. What can I do?
Hello. It probably sounds crazy, but check if you have the maximum volume on the phone and radio on the car. If it does not work, the cable may not be good.
Hi, I've got a 207 with a Rd4N1M-03 radio(that's what's written in the side label). I just want to connect a usb without losing wheel controls etc. What do you think is the best and easiest option?(I've never done anything like this in a car). Would this work for my car? Thanks for your channel! I've got also a 308Sw and I'm also thinking in changing the radio to an android 2din as per another video you've shown
Hi! What you want in your 207 you need this: www.aliexpress.com/item/32794355804.html?aff_platform=link-c-tool&sk=_sda5Op&aff_trace_key=e038ed7c59634d69aa48a461d3576116-1593370100994-06691-_sda5Op&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=e038ed7c59634d69aa48a461d3576116-1593370100994-06691-_sda5Op The best option is an RD43 or RD45 radio: www.aliexpress.com/item/32855227266.html?aff_platform=link-c-tool&sk=yIfUADK&aff_trace_key=34e357f4ea9043b99525d3af0695ae0d-1593370288494-05871-yIfUADK&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=34e357f4ea9043b99525d3af0695ae0d-1593370288494-05871-yIfUADK Tutorial for upgrade radio: ruclips.net/video/z5D4lsLGwVk/видео.html
I was going through these stages when I realised the previous owner had already done this yet removed the chord. Will I still need to set it up with the computer or just re-add an aux chord?
Help I don't have aux option on my source button... wire is plugged in fine citroen c2 car... am I suppose to download anything as this is an 08 car no option for bluetooth ether
@@raykaligis808 If you don't have the same type of radio as in my video, it won't work. This type of radio you see in my video was installed on the Peugeot 307 starting in 2004.
Thanks a lot for you video. I have the original display screen and a new autoradio. Is it possible to configure display screen with pp2000? Or I need to change it? Thanx
En vez de agujerear el portaobjetos inferior, hubieras sacado el cable auxiliar por el orificio que esta detras de la luz de guantera y queda mas disimulado
Adrian Dragan thanks, yes, i managed to make it work, but i need a diagbox to make it work. Here in Cluj, things are a bit pricy for just one small change in diagbox. :)
Hola amigo buena pregunta, vivo en Chile y tengo un 307 al cual le deseo instalar el.mismo cable. Me avisas por favor de alguna idea Gracias y saludos.
@@guidosologuido7260 hola, yo fui a la casa i lo compre , salio bastante costoso 27 euros . Tamb. Lo puedes pedir por internet . En el video te sale el enlace .
Salut Adrian! Am schimbat radio cu un ecran de 9 inch cu tot cu mască cu android 12 două usb ! Merge bine ! 307 sw 2.0 hdi 136 cp cap serie cu toate imbunătătirile cumparat nou cu 22 mii€ pe cind lucram strungar la Bar celona ! In aprilie 2008 azi in iunie 2024 are 188 mii/km fără nici o reparație! O zi bună să ai!
Salutare! Super masina, sa o folosesti in continoare cu placere!
Very good tutorial, I chose to get one of those USB to radio things took about 2 min to set up and I can take my calls easier, save myself half the day. and it has many other uses along with it.
What version of diagbox you used for activation source?
Thank you, I 'm getting a 207 and I'll apply this.
Hi. You can try the bluetooth module instead of the auxiliary cable, much more convenient ruclips.net/video/NaBDzcwQdZg/видео.html
Adrian, you doing a awesome job! 👍👍👍👍👍👍
thanks men 💕💕💕 greetings from chile 🤪👋
Pablo tu lograste configurar el dispositivo??
Gracias por todos los temas que nos proporcionas, quiero que pongas un tema para nosotros en el 2015 Citroen . Tu amigo Mohamed Fawzi de Argelia 🇩🇿
Thanks for your comment. I'm sorry but I don't have a Citroen, but Peugeot and Citroen are very similar. Anyway, I need a newer Peugeot too :))
Thank you sooo much,I have same car and I never can do this on radio,now I know how to,and I can,THANKS!!!!😊😊😊
Many thx, it's works perfactly!
I've just taking my radio out and the back of it already has a plug in the place you put yours there is a spare one next to it tho
Remove the white plug that already exists and replace the plug from the auxiliary cable.
Is it working?
great video! this might be a stupid question but i just bought a Peugeot 308 with AUX already installed, but when i plugged in my phone and used the Source button to select input AUX it said inptut AUX 2 instead of AUX 1 and no sound was coming out. i was just wondering if you may know if i need to reinstall the AUX cable or something?
Hello. I think you should enable AUX 1 using Diagbox.
@@AdrianDragan ok, I'll try it! Thank you for answering 😊
Mine is like that PLEASE let me know if and how it got fixed. I bout an RCA to lightning cable for my iphone hopng it would allow me to connect but I do not get any sound. It is AUX 2 only available. I own a 2011 Peugoet 308 cc. The display screen is orange LED. No usb slots or anything. Much appreciated.
Thanks from México 🇲🇽👍
Hi, thanks for the nice video! Can I use Diagbox with bluetooth ODB adapter or it has to be with cable into the computer ?
Hello. Diagbox only works with the dedicated interface connected to a computer on which you installed Diagbox.
Does diagbox allow you to select aux in as default on the radio? My radio comes with aux built in but have to change from fm radio to aux in every time I turn on ignition.
Hello. I did not see the option to start multimedia directly on the Aux port.
I already have an aux connection in the glove compartment, but want to add a BT to aux device close to the radio. If I add similar cable to the one you used in this video, would it still need activating, even though the current aux works fine? Cheers!
Hello. Your car already has the AUX IN function activated, so you don't have to activate it anymore. Just plug in the Bluetooth module and it will work fine.
@@AdrianDragan Cheers for the reply.
I plugged in my aux to Bluetooth in front of the shifter on my 207cc and it doesn't work
Elle est super ta vidéo
I have retrofitted my 207 with a RD45, new display, microphone installed in the roof. Everything works great except one thing: The audio settings in the menu are greyed out, cannot select them. Do you have an idea? Will I need a diagbox to activate it? Would not like that...
Yes, when upgrading to an RD45, you need to reprogram it. I assume you had an RD3 or an RD4 previously installed. Fortunately, doing such a thing at a qualified Peugeot mechanic doesn't cost much.
Right.
I got an RCA to lightning cable for my iphone 13. I had the AUX 1 and 2 enabled but no audio works. I checked the cable on another stereo so the cable works but now I have no idea what to do next. I plugged into the RCA slots in the glove box and other end into my phone. I have checked volumes and bot AUX 1 and AUX 2. Any ideas please.
Hello. Try with another phone.
@@AdrianDragan I did, I think what has happened is the previous owner installed a PARROT hands free phone kit and it got connected to the radio so the RCA slots are not operatable now. I will need to unplug the parrot and see what is going on.
Hey Adrian, your videos are great, they helped me a lot. Did you ever had an issue with activation of AUX2 in RD4 from 2012? With Lexia I can change input from mode missing to reserved to kml/nomad. My original handsfree radio works well, through aux1, but i also want to actvate AUX2 to use aux cable from headphone jack.
Lexia works well because when I am changing aux1 from kml/nomad to conventional, I can choose aux input on my radio, but I i have still missing AUX2 when changing source of my radioreceiver.
Hello. I don't really understand why it doesn't work. But don't you have RCA plugs for AUX in in the glove box?
What cable do you use for the car to laptop connection, can you please give a link for buying?
Hi. You need this cable (Color: FULL LED): s.click.aliexpress.com/e/_DlYZGV7
Hello! I have a Peugeot 407 with the RT3 radio. In the glove box I already have the video rca, so I just purchase the audi rca cable with a 3.5 jack in the other end and I am able to use it only in the video mode, so it doesn't work when I'm driving. After this, it's only necessary to activate the aux through the Diagbox and that's it? Or is there anything else to do? Thanks a lot for the help!!
Hello. I'm sorry, but I don't know what the steps would be to enable AUX on this RT3. However, try to activate AUX IN audio using Diagbox, you may also have to connect the cable to the radio jack in the dedicated audio aux in port.
How do I know if AUX is activated? Just bought the car and when I select source I can choose from radio and aux. That means it must be activated right?
If you already have AUX in the menu, you don't need to activate it with Diagbox.
Hey Adrian, I recently bought a 207 Sport. I tried to connect with the aux port but it didnt work. Then I bought a 12-pin aux cable and installed it like you in this video. The aux 1 input was already activated when I bought the car but it still doesnt work. Tried with two different phones (iOS and android) but there was no sound coming out of the speakers. Could it be that the radio is faulty?
Also, the seller I bought the cable from said it works for 207 RD4 from Bosch, but my RD4 is from Continental. Could that also be an issue?
Hello. There are two AUX IN. I think your cable is configured for AUX 2, I don't think the radio can be faulty.
One more thing: did you say that you already have AUX IN activated, you don't have two RCA plugs in the glove box?
@@AdrianDragan Thanks for the reply Adrian. Yes, AUX IN was already activated (I bought the car used) but I dont have two RCA plugs in the glove box. Only one AUX IN in the middle console at the bottom, next to a USB port. (just behind the gearshifting stick). But that AUX port didnt work, so I bought the cable. When I press the 'source' button on the radio it changes between radio and AUX IN 1. So I did the same like you in the video. (same spot for the 12 pin connector)
I am really clueless atm.
i've activated the aux-in in a citroen c5 but i don't get any sound. any idea why?
i hace same problem
@@victor-sc2ed find the pin diagram of the connector and change the pins to match with aux in 2
@@bakautikas93 ohhh in aux 2 works? Is same than aux 1?? Thanks a lot. I was thinking that is necesary yes or yes aux1 pins
@@bakautikas93 you was ritgh. A lot of thankss..i chabge position of pinss💖💖💖
@@victor-sc2ed glad to help
Does the car need to be on when connecting the lexia cable?
Hi. The ignition switch must be switched on.
Hi,
Just re-add the aux cable.
hello so i just did all this but when the diagbox is connected and i go to radio menu it works perfectly just like in the video but when i disconnect the diagbox it seems like the radio is deactivated i cant turn it on anyway and when i go to menu screen with the multifunction screen audio setting is like creyed out if that maxes sense. i have also tryed to disconect the aux and revert the change in ecu but the problem percists. any help would be apreciated.
Will i be able to access the software thru Carly code reader? That would be interesting
Hello. I haven't tried but I don't think it's compatible to access the software.
When I hook up the digabox and get to the repair section it comes up with "communication error" on pretty much everything any idea why this is??
Hello! I'm sorry but I did not encounter this error. Is the car recognized by Diagbox?
It Would Be Interesting a video of how to install an interface to use the steering wheel controls and recover the computer on board in Peugeot 308. Thank You for your work
Hi,
Thanks for suggestion, I'm going to do a tutorial in the next few weeks. However, you do not need any hardware interface, just activate the Diagbox software option to adjust the clock and display settings with the steering wheel controls.
Wow, really?... So you're saying that I don't need additional hardware? If that's the case, then that is awesome! Because, I read on forums that said that an aftermarket module/hardware, called "PC99-X44" (X44 being specifically for Peugeot) from brands such as «Connects2» or «Autoleads» should be bought, in order to do that very same feature... And that bloody module costs like nearly 100 Euros/90 Pounds!...
My car is a 307 SW (2006)
Works! Thank you.
I brought a bluetooth thing u put in the car cigarette lighter socket much easier but the only thing u got to do is pair it with bluetooth with your mobile phone
What do you mean car socket?
The lighter section, mostly on older models of cars .
Hola que tal ?
Le quería preguntar , que color es el cable del mando del volante que sale hacia la radio , a mi c4 le he puesto una radio y solo me falta saber el cable (kay) para empalmar lo un saludo
Hola. Si tiene cables de alimentación dedicados para su automóvil, también debe tener un decodificador canbus detrás de la unidad Android, luego realice la configuración correcta en el menú canbus y los controles en el volante deberían funcionar. Mira aquí: ruclips.net/video/apJts9HvIfg/видео.htmlsi=MKO5m3LqfodvD33r
Adrian, do you remember if your volume with aux was lower?
Yes, the volume on Aux IN was a little bit lower than on Radio or CD. But for me it was enough.
The best tutorial thank you
I have a question, if anyone could answer it would be helpful. I have a Peugeot 207 and I want to do the set up for the aux cable. Is it necessary to do the part with the diagnosis? I mean will the aux input not work if I don't change it using that software in the video?
Hi! Yes, it is necessary to activate the function with the diagnosis, otherwise it will not work.
did you figure it out, please?
hello i took the radio out and there was already a socket in the place. It is all wrapped in tape so couldnt find where it went do you know what its for? no aux anywhere else in the car btw
Hello. Remove that socket from the large socket. That socket is for AUX IN equipment but was not installed at the factory, so it is unusable. You can plug the plug into your cable instead of that white socket.
@@AdrianDragan still promptly replying 2 years after uploading?!! what a good sir thank you
@@marcusf7249 Why not? I like what I do and if I can be helpful
Would this work for a 207 Peugeot?
Hi. Yes, it works on the Peugeot 207.
sorry :(
I don´t have a Profesional Scanner, Could I do this with a OBD2 common scanner??
Hello. Unfortunately, it only works with a dedicated Peugeot & Citroen scanner.
where tf do i get that soft diagnostics cable to usb from?
Hello. Aliexpress: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8
is there any other way to connect the AUX without losing CD functionality?
Hello. Is the Aux socket the same as the cd charger?
@@AdrianDragan For factory settings, pressing "source" you can switch from the radio to the CD player
I've gone to do this yet there's already a cable in the space you mentioned 😬 and the plug doesn't fit the other side. What's that cable there for? Any workaround?
Simple: remove the plug that is stuck there and put the plug from your cable ;)
Andy Durrans did it work for you, i have the same problem. But i did not have the balls to take out the other pin 😂
@@attaradio2724 yup worked absolutely fine, haven't noticed any effects from the old cable not being there either, everything still works (steering wheel controls etc).
@@adurrans Thanks for responding, took the old plug out and put the new one in. Works just fine!
Может кто подскажет,как подсоеденить магнитолу другую эту оставить??? в роли(бортовова компьютера и разных показаний а другую использувать как музыку хорошую с усилком
Можна замінити на нову без старої, але треба перехідник, є моделі дорожчих перехідніків, які будуть працювати з мульти рулем
В гривнях це більше 2000
Mines comes up programing failed how would i fix this?
I bought a 2009 Peugeot 308 with RD4 radio and the previous owner had already installed the AUX cable. I connected my phone with Spotify playing songs and it plays fine, however the controls behind the steering wheel don't work. I can raise the volume from the radio knob, but not from the controls behind the steering wheel, and next or previous song I have to do it on the phone. You're raising the volume from behind the wheel in the video. The car reads the AUX input so I guess it's already activated with Diagbox.
I don't know why you can not adjust the volume from the controls behind the steering wheel, however when using the AUX IN function thet next or previous song can only be used on the phone.
@@AdrianDragan Do the next and previous song controls work on bluetooth? And can I install one of those boxes with bluetooth on them?
@@dustraider2940 This is only has the Audio Line In function and you can not control next and previous song. Perhaps with the original Bluetooth Peugeot.
@@AdrianDragan Ok, thanks.
my citroen c4 have bluetooth serial only for calls. this bluetooth don’t work as Audio. how can activate the bluetooth as audio mode?
Hello. As far as I know these bluetooth radios are only for calls and cannot be used for streaming music, most likely you should replace the original radio with an RD45 that has a built-in bluetooth module compatible with streaming music, see in my video: ruclips.net/video/z5D4lsLGwVk/видео.html
Question if I buy a pp2000 can I do all of this myself or do I HAVE to take it to a dealer??
Hi! By using PP2000 or Diagbox you can activate this option (and many more), there is no need to go to a dealer.
@@AdrianDragan thank you was hoping that was the case I have one ordered thank you
Tie pe Aux nu ai volum+bass+inalte mai mici fata de radio?
Salut. Am raspuns in comentariul precedent :)
@@AdrianDragan Mersi.Dar unde ca eu nu il gasesc.Ma refer la co ectarea aux originala a masinii prin cablu.
Es sencilla la instalacion del dispositivo, yo le instale uno bloetooth la pregunta es de donde sacar el cable y el driver para entrar a la computadora del auto???? Necesito orientacion gracias.
Hi. Look here: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8
Hi there Just got a 307cc and have the cable on order, my question is how much is a garage gonna charge me to do the computer side of things?
Probably 10-20 Euro.
Does this works on citroen c2 2007?
Yes.
Hey! Does the PP2000 software run on a Mac? Is there a link to download and try it out? Thank you!
Hello. I don't know if there is a Mac version. You will receive the software for Windows on CD when you buy the Diagbox interface.
@@AdrianDragan Alright, thanks for the quick reply. Great video, well done!
Hi. Does it go where the cd charger from the trunk is connected?
I mean, if I connect this, I will loose the 5 CD charger from the trunk of the vehicle? Thanks
Hello. As far as I know they are on separate jacks, so it doesn't affect CD charger.
@@AdrianDragan oh thanks. I thought the plug you disconnected was the cd charger from the trunk
Anybody can help me with this problem: When i try to Save the setting ''Conventional'' the program said: Programming Failed. I use Win7 32bit before that i used WinXP buy same error on both systems. Using Version 7.02
Stephan S I’ve got the same issue but it works fine under any other component in the car
Whats the diagbox version?
Hello. Here was an old Diagbox version, probably 6...
Hi all, any idea if it would work if I connected a USB port to the aux cable adapter through the jack. I'd like to listen to my music from my USB stick this way.
Hello. You cannot put USB on the auxiliary input. To listen to music on USB you need something like this: www.aliexpress.com/item/32794355804.html?aff_platform=link-c-tool&sk=Ti3KDXE&aff_trace_key=26a0c2efe81f4fdbbf58f03234be324b-1598984892774-03893-Ti3KDXE&terminal_id=364d159dab6d4da48c68657f8054a5c8&aff_request_id=26a0c2efe81f4fdbbf58f03234be324b-1598984892774-03893-Ti3KDXE
ruclips.net/video/52huHY_Q-rg/видео.html
Hi does this method work on a Peugeot 207 2007 plate?
Yes.
Salut,
Foarte sugestiv tutorialul.
Intrebare: din comenzile de la volan, se poate trece la melodia urmatoare sau doar se actioneaza doar pe volum?
Salutare! Se poate actiona doar pentru volum. Multumesc pentru aprecieri :)
@@AdrianDragan please help.. After set convectional and apply get this : programing failed
@@haris9494 I've heard of this problem before and I don't know what would be the cause or its solution ...
Hi. Thanks for the tutorial but I have a question. If the aux input is already activated (when I press the “input” button on the radio I have the aux 2 option), do I still have to do the second step (connecting to the computer and all that), or is buying and fitting the cable enough?
Buying the cable is enough. You must insert the PIN in AUX2.
@@A.andelo I see. Thanks for the reply 👍
is there a possibility to connect usb with music to this aux cable? and can the player play?
No. You need something like this: ruclips.net/video/52huHY_Q-rg/видео.html
can you do this but use a bluetooth 12pin adapter for a 2007 Peugeot 207 with an RD4 or can it only be aux?
Hello. All you need to do is replace your auxiliary cable with the bluetooth module ruclips.net/video/NaBDzcwQdZg/видео.html
Or you can buy a bluetooth module that connects to the RCA Aux IN jack: www.aliexpress.com/item/32821770160.html?aff_platform=shareComponent-detail&sk=_AN7CU1&aff_trace_key=c6317c96f7ae48bf8b205390025c93e8-1609275238071-02903-_AN7CU1&terminal_id=d92441f0a7b94ef29dcdfc816a4dd068&tmLog=new_Detail
Hi,
What about a BlueTooth Module ? Do you have a video for that too ? 🤔
Thanks !
Best Regards,
I do not have bluetooth module for now, but I will order and review it.
Thanks!
I just received the Bluetooth module from AliExpress for the rd4 in a c2 and I'm going to test it today... From a first look the only difference I can see is that the Bluetooth module also needs 12v from the battery or a 12v rail nearby the radio. I haven't removed my radio to see if it's easy enough but I guess it'll be, even if you don't use a soldering tool to make it look like an OEM's job. It cost me 6.73€ shipping included and I live in South Europe. Took 23 days to be delivered. I'll let you know the results soon.
@@marinosn.1642 hi can i know any info of what happened with the bluetooth thing
@@amirbazzi1718 Yes of course. I've installed it and it works fine. I used two Scotch locks for the two power wires of the Bluetooth module. I Scotch locked the red wire with the +12v wire of the radio and the black wire with the radio's gnd wire so as the module gets power same time as the radio. Really easy and took me less than 20 minutes including the aux source activation.
The adapter I've installed
a.aliexpress.com/_d6GGhHa
The locks I've used
a.aliexpress.com/_dT5xx9a
@@marinosn.1642 thank you !
I have problem with sound quality , i have factory aux port in my peugeot 207 gti , and radio have better sound then aux , if you can help , thanks !
Auxiliary audio input needs a stronger signal, I can't tell you another solution.
Thank you for this video.
Can you tell me where you can get the PSA Diagbox software?
I bought Diagbox software and hardware from Aliexpress, come together.
@@AdrianDragan Can you give me a link?
Hi, I'm just as interested as you and I think this is, I'm saying it because it has the same number as the device that shows 9780.Z5. es.aliexpress.com/store/product/Lexia3-PP2000-with-Diagbox-V7-82-Software-Scanner-for-Citroen-for-Peugeot-OBDII-Code-Reader-Auto/2924002_32956873787.html?spm=a219c.search0104.3.1.4ced47fa72eWjK&ws_ab_test=searchweb0_0,searchweb201602_3_10065_10068_10547_319_10059_10884_317_10548_10887_10696_321_322_10084_453_454_10083_10103_10618_10307_10712_537_536_10713,searchweb201603_6,ppcSwitch_0&algo_expid=ebeccff7-e33e-4c9a-8f6b-3eeae5363304-0&algo_pvid=ebeccff7-e33e-4c9a-8f6b-3eeae5363304
@@Jocheque Hi, seems to be the same as what I have.
Link died! Will this work with fiat Scudo as radio looks identical
Hi. Any cheap diagnostic tool to do this job ??? Βecause the dealer will ask 50 - 100 euro to plug it. Thanks
Hi. The only way is to buy a diagnostic tool and use it whenever you need: s.click.aliexpress.com/e/_DndhTRj
You can use the Bluetooth mode instead of the cable: s.click.aliexpress.com/e/_DekrsQz
Hi Adrian work aux cable on Peugeot 308 radio rd4 ?
Yes, it works. This radio I installed the aux cable is RD4.
Hello Adrian, exista o alterare a sunetului folosind aceasta metoda de input ?
Eu am preinstalat pe C4 Picasso audio in, se regaseste in compartimentul storage al pasagerului . Se pare ca sunetul nu este la calitatea dvd-ului/radioul-ui. Multumesc.
Salutare. In testele mele am observat doar un volum mai mic nu si o pierdere de calitate.
@@AdrianDragan am verificat si eu ..ai dreptate volumul e mai mic, si da impresia de calitate mai slaba. Ajustat volumul ,folosit alt telefon. Pare ok acum. Multumesc.
Well, but where I buy the usb cable, please tell me, and where do I get the program to program the radio
Hello. But here I don't show you how to mount a USB cable, I show you how to mount and activate the Aux IN cable.
Links:
- Aux IN Cable: www.aliexpress.com/item/32870731809.html?aff_platform=shareComponent-detail&sk=_AfcZaT&aff_trace_key=580f19ec45554c948558c7851afcaef2-1608644564837-08634-_AfcZaT&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail
- Bluetooth module for AUX IN Audio Peugeot / Citroen: www.aliexpress.com/item/32826594463.html?aff_platform=shareComponent-detail&sk=_Af387Z&aff_trace_key=1e9de9f9912a4083aab181d24053d488-1608644645392-05181-_Af387Z&terminal_id=364d159dab6d4da48c68657f8054a5c8&tmLog=new_Detail
- Diagbox hardware / software interface: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8
Sorry sorry for my mistake, i mean the aux cable
Doesn't it ask for a radio PIN when reconnecting it?
Does anyone know?
Hello! If you disconnect the radio from the power supply you do not need any PIN code, the radio security is based on VIN (vehicle identification number).
hi, I have a 2009 Citroen C3 HDi, I bought your same aux cable. if I press the SOURCE button it says INPUT AUX 1 but if I try to connect the phone and play the music I don't hear anything. What can I do?
Hello. It probably sounds crazy, but check if you have the maximum volume on the phone and radio on the car. If it does not work, the cable may not be good.
@@AdrianDragan hi, when I try to turn up the volume nothing appears in the display, it will probably be the cable .. I don't know
Hi! Could you do this in a Peugeot 206? Thanks
It may be compatible, but it depends on what radio model you have.
@@AdrianDragan I have the RD3 model. Your channel is great. Juan from Argentina
This is for the RD3: www.instructables.com/id/Aux-in-jack-for-VDO-RD3-00-car-radio-Peugeot-Cit/
@@juanignaferch hola Juan ! Tengo un 307 2007 lo probé y me funcionó perfectamente !!!
There is also a solution to solder directly the Jack wires on the chip inside the radio for rd3 on 206
a question. Where do I get the car connector to the PC, to perform the scanner?
You can find links in clip description.
Muy bueno 👏👏👏👏
Can you tell us another diaboxes like one whit app ?
Hi. There is also an unofficial software + OBD device called PSA-COM, I haven't tested it: s.click.aliexpress.com/e/_Ded1Fih
Hi, I've got a 207 with a Rd4N1M-03 radio(that's what's written in the side label). I just want to connect a usb without losing wheel controls etc. What do you think is the best and easiest option?(I've never done anything like this in a car). Would this work for my car? Thanks for your channel! I've got also a 308Sw and I'm also thinking in changing the radio to an android 2din as per another video you've shown
Hi! What you want in your 207 you need this: www.aliexpress.com/item/32794355804.html?aff_platform=link-c-tool&sk=_sda5Op&aff_trace_key=e038ed7c59634d69aa48a461d3576116-1593370100994-06691-_sda5Op&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=e038ed7c59634d69aa48a461d3576116-1593370100994-06691-_sda5Op
The best option is an RD43 or RD45 radio: www.aliexpress.com/item/32855227266.html?aff_platform=link-c-tool&sk=yIfUADK&aff_trace_key=34e357f4ea9043b99525d3af0695ae0d-1593370288494-05871-yIfUADK&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=34e357f4ea9043b99525d3af0695ae0d-1593370288494-05871-yIfUADK
Tutorial for upgrade radio: ruclips.net/video/z5D4lsLGwVk/видео.html
@@AdrianDragan thanks! And i have to activate the auxiliary, right? (I mean, it is not plug and play)
@@jor4274 Hi. Yes, you need to enable AUX IN for your radio.
@@AdrianDragan thanks!!!!
Is this cable compatible with a rd4 unit of a peugeot 207
Yeah, if it's the same radio model.
muy bueno
😀😃
I was going through these stages when I realised the previous owner had already done this yet removed the chord. Will I still need to set it up with the computer or just re-add an aux chord?
Just need to re-add
Can i activate AUX trough the Delphi diagnostic software?
Hello,
Can only be activated with Diagbox (PP2000 or Lexia).
Help I don't have aux option on my source button... wire is plugged in fine citroen c2 car... am I suppose to download anything as this is an 08 car no option for bluetooth ether
You also did the software activation as you see from the minute 3:09 in my video?
@@AdrianDragan no I've not got that wire... will I have to take it to a specialist to install software?
@@kimmy607 Yes, you must go to someone who has Diagbox software / hardware diagnostics for Peugeot Citroen.
Is it works for peugeot 307 sw? Thank
Hello. What year is the car from?
@@AdrianDragan 2003
@@raykaligis808 If you don't have the same type of radio as in my video, it won't work. This type of radio you see in my video was installed on the Peugeot 307 starting in 2004.
@@AdrianDragan its same with yours
@@raykaligis808 if it is the same as my radio it should work.
Es necesario conectarlo al ordenador para poner el cable auxiliar??? 😱😱😱
Yes, it is necessary to activate this function.
@@AdrianDragan but it will be necessary to control it from the wheel
@@josemontoyamotos290 From the wheel you can only control the volume.
Hi Is possibile activate the steering whell command also?thank you
You can just control the volume, not change the song.
Merci 💯
Is that cable works in 308 ? RD4
Is is required to use diagbox?
Yes. For activate the AUX IN Option.
@@AdrianDragan thank you Adrian ☺️ xx
Can i use another car-boot ? I have a "DELPHI ". Thanks
Thanks a lot for you video. I have the original display screen and a new autoradio. Is it possible to configure display screen with pp2000? Or I need to change it? Thanx
Hi. What type of car radio do you have now?
@@AdrianDragan hi Adrian. Thanks ! A low cost autoradio
@@eliedrone Reconnect the original radio, set the clock and then replace the new radio.
@@AdrianDragan don’ t have anymore the original car radio..
Hello, I am getting ‘data access problem’ in DiagBox. What do you think is the reason.
Hello. I don't know where the problem might be. If it still doesn't work, explain the seller's problem, I hope he knows how to solve it.
Does it allow audio thru that or just charging
Allows audio only.
@@AdrianDragan please can you do video for bluetooth qnd how to activate i really hope you do that
@@AdrianDragan i have 2012 308 and i need bluetooth for it
In a month I will also make a clip on how to install a bluetooth aftermarket unit.
@@AdrianDragan Can you have both installed ? So the Aux Cable + BlueTooth module. 🤔
I have Renault fluence 2015 i need pro for pc and connect by obd2 to change language and clock can help me thanks allot 🤠
Hello. I'm sorry but I don't know anything about Renault.
Citroen C4 2004, same procedure. Thanks.
Thanks for the feedback.
Yes, it's works.
Salutare unde pot activa și eu auxiliarul la un Peugeot 307 ?
Ma poți ajuta ?
Salut. Te pot ajuta dar eu sunt din Tulcea. Din ce localitate esti?
Bună ziua . Cum putem comunica pentru o astfel de instalare , pe un C4 . Mulțumesc anticipat...
Buna ziua. Dati-mi un mesaj pe aceasta pagina: facebook.com/psadiyrepairs
@@AdrianDragan Bună ziua . Încerc și m-aș bucura să reușesc ... E-mailul meu . ciaky.1302@gmail.com
En vez de agujerear el portaobjetos inferior, hubieras sacado el cable auxiliar por el orificio que esta detras de la luz de guantera y queda mas disimulado
Everyone is free to put the cable anyway, I chose to put it there because it's more handy.
is this working to a RD4 N1 03, with mp3 cd player?
Yes, it should work. You can try the bluetooth module in my new clip: ruclips.net/video/NaBDzcwQdZg/видео.html
Adrian Dragan thanks, yes, i managed to make it work, but i need a diagbox to make it work. Here in Cluj, things are a bit pricy for just one small change in diagbox. :)
@@claudiuantohi8531 Intra pe Facebook si cauta-l pe TurboJack, cred ca el te poate ajuta cu activarea la un pret decent: facebook.com/turbojack
Morning! Is this cable compatible with the citroen c4 picasso 2012?
Hi,
Yes, it is compatible.
If your radio it is RD4.
Works on peugeot 207 2010?? Thanks.
Hello. Yes, it works on the Peugeot 207 as well.
Hi i have 307 2007 but i have different board screen, will it work for me?
You probably have a type A screen, but you can use the AUX function on that screen as well.
i have a 2007 307 and while trying to activate it it actually puts it into the “reserved to km/nomad” and doesn’t want to activate it - any ideas?
@@brontebaonza3620 i do not know i went to car electrician and with profesional diagnostics he activated
This works for RD4 with “Type A” display or only with Type C”?
Yes, it's works.
Thank you!
De donde comprastes el cable ?
Hola amigo buena pregunta, vivo en Chile y tengo un 307 al cual le deseo instalar el.mismo cable. Me avisas por favor de alguna idea
Gracias y saludos.
@@guidosologuido7260 hola, yo fui a la casa i lo compre , salio bastante costoso 27 euros . Tamb. Lo puedes pedir por internet . En el video te sale el enlace .
Aliexpress, see clip description.
@@AdrianDragan gracias amigo. Saludos desde viña del mar Chile
@@ciprianfeldrihan744 gracias amigo por el dato. Saudos
Hejo. Czy trzeba wymieniać wyświetlacz?