Kincaid Harrison thanks, I’ll be the first to admit, I learn a lot every time I work on something. A lot of times I got to teach myself how to do stuff for these videos. 😉
@@brian_scotto "I got to teach myself how to do stuff for these videos." Nobody ever notices! Believe me. Okay maybe some of us do, but you're doing a wicked job. I sure as shit can't run a company so no hate here!
give them each a shitty car and a budget. give them a however long time frame and then put them to the test with random competitions call it the rock and roll build off...since dan rocks and rob rolls
Its great you and your wife both like the same things and have common fun ground. Well fun most the time lol. Love the content. Hope everyone has a great day and be safe and wish you and your family a lifetime of happiness and health
@@zephyr5574 you're not an idiot, you're moron. A disco (short for discovery) is a model of land rover ; the model that you are looking at in this video.
‘Three Feet High and Rising? This was my favorite De La Soul album back in the day! I’mma edit my favorite tracks into this Carcaine vid! It’s gonna be SICK, dude!!” - a certain Hoonigan editor
The music on Carcaine episodes is always on point. I bop my head to the beats while learning that I should've been a gear head. Love all the Hoonigan material.
I've been in hoonigan rehab for nearly 1month. I was doing really well, Not a single vid. Then I had this real bad craving that I just couldn't resist. I thought just 1 vid to make it go away, now I'm a full blown addict again. Thanks guys
Hey bud I used to use a similar set up to lower engines in. Eventually I made a set of forks that had the cherry picker attached directly to them. It made lowering in old BB's a snap. It was also extremely convenient and safer when working alone. You definitely have the skills to Fab one up yourself.
A note on the adapter shaft between the transfer box and the gearbox. On newer Defenders, they have a similar adapter between the Ford / Getrag gearbox and the LT230 and it has a lot of problems fretting, wearing then failing at inopportune moments. That leaves you with no drive at all. The cheap fix is lots of grease, Ashcroft transmissions do an improved one. Just something to be aware of seeing as you're doing a similar thing here.
I’m so happy chair slayer is back, him and heart are like dumb and dumber, there good alone but the best together. edit:(I don’t think their dumb, it was the first iconic duo I could think to compare them to)
I like how far the tranny/t-case will sit up in there. On the jeeps the mount sits level with the frame and bolts to the cross member and yours looks to be about 5-7 inches higher in the frame so more out of the way
This rover inspired me to do an over lander setup on my 92 ford. I was thinking on it forever trying to figure out what I wanted to do with it. Thank you guys! Take it easy 🤘🏻
Man, I so wish I could do this to my Discovery. My 4.0 is still going strong, but this is just such a phenomenal upgrade. Wishing y'all the best of luck!
when i started watching hoonigan like a year ago. i never really like scotto. but this carcaine rehab videos. watching him work , and doing things really well has gained my respect. and his chick!?? I thought you guys were just a bunch of california burnouts lol. couldnt be happier to be wrong, and see this on the channel. shes driving a forklift for godsakes. pretty dam cool. hidden talents all these people have lol.
One of my exes had no problem getting dirty with me...literally and figuratively...one night I fell asleep under my Nova and woke up with a warm feeling on my nether region and had to think for a minute about having that feeling in the shop! Then I realized that Min was in the shop working with me...before that realization, I was wondering which guy in the shop was I was going to have an awkward conversation with...lol...once things became clear, I almost did a somersault due to two of my favorites coming together, so to speak...most guys would love this situation...I know I did...I just realized that this little story sounds a lot like a tale that would show up in "Penthouse Letters"...lol...if they still exist...I'm not really sure as I haven't bought any magazines in around 20 years...what do y'all think?
Dang Scotto, must be nice to have a better half that likes to work on cars! Mine won't even help me wash mine! Great video series, I enjoy everything Hoonigans does. Thanks..✌
When you guys asked what should Scotto work on next, never knew you guys would read my comment.. swap the 4.0 for a tdi on the disco ! Every rover guys dream. I own a 03 d2 and man I need about 12 gs for this swap! ! F-en hooni-Mechs are crazy
Since you guys use the forklift a lot to remove and insert engines. Heres a tip that my shop did. Drill a hole that's fits like a 3/4 tow ball. That way if anything slips forward, it has a stop. Better than a c clamp
I used to think grinding sparks hurt too. 14 years in a shipyard and I don't even notice them anymore. Haha I still use all the other PPE but they don't burn anymore
You sure are a lucky man Scotto. The world needs more Ashley
5 лет назад
Awesome man had a new 02 disco SE with 18 inch wheels full pushbar and grill package black on tan..it sat in the garage w a cover until 04 the. When I moved to Florida and drove it 22k miles in one year..it ran like a G but all the electrical interior bits just started taking a shit so aggravating..when I didn’t drive it it was amazing lol soon as I used it the English electronics failed like a sunuva 🐝..I had a beautiful setup attached to a new black and chrome single turbo Polaris MSX..got it to 185hp which was fucking meteoric levels in 04..good times man thank u for the memories man I miss my dad :(
did a built TT 4jg2 on my isuzu trooper. thinking about swapping it over to my disco 2. did you keep any of the abs features/gauges/ or is it all gone after the swap. should i keep the isuzu 5 spd or go with the disco trans? idk about these discos but my v8 just slipped a liner after i put a full terrafirma everything in it. im pretty sure i can get 400hp out of that 4jg2 if a honda is puling 1060hp and thats more than you could expect from a 4.0l. plus with the propane injection the fuel milage and egt's are great. and hows about smog, my trooper sits in a garage becuase it isnt an eoa regulated motor. how do you get around it.
man im a welder ive done that socks thing a couple times thats awesome... you should have cut along the toe seam, they are reusable washable sleeves then
Is there a video of this thing running or is it still being built? Just curious to see if he thought it was worth it before doing the same thing to mine.
I'm doing the same swap with the 4JG2 and 5spd this weekend, my 2nd diesel conversion. I was talkin a bit of shit 6months ago and it seems God has smitten me. Hahaha this is dope son.
The commitment to "Wrapping" an episode from the testicles is real. Also, Scotto sounded like he was gonna die after that one haha! I need to get a project car again so i can stay up all night and wrench!
disco and defender chassis are different depths , ive put a few defender truck cabs onto disco chassis , thats the bit to watch out for when moving outriggers etc
When are you guys going to FINISH THIS? I'v been waiting to make my decision to go with the R2.8 or say screw it. Have not seen one complete solution finished where all the electrics function without a crazy amount of cost like using a 6 speed sequential box. Where is this project at?
Love my disco 2 03 4.6 V8 but will probably never be able to swap it and end up scrapping the old girl when she dies... Sweet to see someone doing this swap though!
![Cummins R2.8 Swapping a Shipping Crate #RamRecharger [EP1]](http://i.ytimg.com/vi/xsmlMdlTW30/mqdefault.jpg)
Get dat white-on-white CARCAINE TEE here: www.hoonigan.com/collections/t-shirt-tanks/products/carcaine-one-ss-tee?variant=12900918034485
Hoonigan Bonus just call danger dan , watching you work hurts my heart.
Obviously Ashley is the better mechanic in the Scotto fam. MORE ASHLEY!!!
Can I just say that Scotto has way more mechanic ability than he is given credit for.
Kincaid Harrison thanks, I’ll be the first to admit, I learn a lot every time I work on something. A lot of times I got to teach myself how to do stuff for these videos. 😉
As does Ashleigh
They both do. But Ash definitely gets more done. Brian works more at my pace lol.
Brian Scotto Waiting for you guys to do like a mk3 vrt or a big turbo 1.8t mk2. You and Vin both know your inner VW kid is still there.
@@brian_scotto "I got to teach myself how to do stuff for these videos." Nobody ever notices! Believe me.
Okay maybe some of us do, but you're doing a wicked job. I sure as shit can't run a company so no hate here!
Love the correct usage of PPE/face shield when using cutoff tool/angle grinder! Atta boy Scotto
Respect to Scotto and Ashley for actually doing the work, one day all projects will be done :)
Scotto's music choice is always so damn good🔥🔥🔥
Noah Pacheco Loving all the De La snippets :)
@@getahanddown whats that song at 0:22?
I also want a chairslayer vs danger dan weld off or build off
I would actually more like a Scotto vs Brad weld off... Dan and Rob know what they are doing, where is the fun in that?
give them each a shitty car and a budget. give them a however long time frame and then put them to the test with random competitions
call it the rock and roll build off...since dan rocks and rob rolls
A drift off possibly 2?
@@chair362 I guess this is were Build & Battle came from.
ROBS BACK!!! Super cool dude.
"We put this on this and then we put it into here". That's what I call meticulous planning😂
It really warms the heart to see husband and wife turning wrenches together !!
You seem to be taking to the rehab well, Ashley and Rob are good sponsors.
Its great you and your wife both like the same things and have common fun ground. Well fun most the time lol. Love the content. Hope everyone has a great day and be safe and wish you and your family a lifetime of happiness and health
joshonyx101 - What a wholesome, heartfelt comment :,)
Scotto and Dan always have the best wraps. We need a Hoonigan wrap off competition at sema
That could happen. We will do it on TWITCH
@@TheHoonigans Do It
More Rob! More Ashley!
IamrealX ..and less scotto
More Ashley fersure! She knows her shit and shes easy on the ears.
Cummins, putting the "range" in Range Rover 😆
It's not a range rover, its a disco.
suprlite it’s not a disco it’s a Land Rover
@@zephyr5574 you're not an idiot, you're moron. A disco (short for discovery) is a model of land rover ; the model that you are looking at in this video.
‘Three Feet High and Rising? This was my favorite De La Soul album back in the day! I’mma edit my favorite tracks into this Carcaine vid! It’s gonna be SICK, dude!!” - a certain Hoonigan editor
You win the “spot the beat” game of the day.
@@TheHoonigans choice as fuck tunes.
The music on Carcaine episodes is always on point. I bop my head to the beats while learning that I should've been a gear head. Love all the Hoonigan material.
Always looking forward to the carcaine rehab episodes.
Welding, protective Hoonigan sleeves? YES, please.
Eric Yeah, it’s on the list. Maybe a collab with Miller.
oooo a collab with Miller would be badass!
It’s testicular !
Put it on a shirt
Lmao I was goin to comment that but you beat me to it lol
Awesome to have your lady help out and have same enthusiasm!! 🤙🏿
2 projects done? Time to buy another car
Shhhh! He reads the comments!
Sounds like his wife read that lol
More Chairslayer!
fully endorse this.
Please please please!!!!
SQUAD!!!!!! I'm Proud of you Scotto fixing your carcaine habit
Mista Firo I dunno, Vin’s 240 looks to be a few fuel lines away from starting! This is where the real fun begins for the Disco.
He didn't fix his habit all he did was get a Cummings engine into the Range Rover, he still has plenty of non-running vehicles.
@@r4ng3k03r1 He got the Audi running already.
@@1slotmech it only took 15 years haha. I'm just goofing on him cuz he hates it lol
Hey Scott, one of the best parts of this build is that Ashley is helping you,...and Chairslayer too :) Cheers from Australia :)
Saturday Morning Carcaine Crew! What are you working on this weekend?
My Mazda ❤️
66 F100🤙🏻
My Land Rover Discovery that I stupidly said I’d have done in time for SEMA...
91 Wolfsburg jetta with a carrado g60 supercharger.
E34 525i!!
I've been in hoonigan rehab for nearly 1month. I was doing really well, Not a single vid. Then I had this real bad craving that I just couldn't resist. I thought just 1 vid to make it go away, now I'm a full blown addict again. Thanks guys
Scotto the only hoonigan capable of destroying my speakers when he wraps the episode
Scotto, every gearhead watching right now is uber jelly that Ash will wrench with you. Well done guys, couples that wrench together stay together!
A Scotto joint means 90s east coast hip hop jammers. 🤘
Iron_dookie you know he picks a different artist each episode for the Shreditors to cut to...
What is the song at 2:58? Good to see you finally working on the Rover 😊
Hey bud I used to use a similar set up to lower engines in. Eventually I made a set of forks that had the cherry picker attached directly to them. It made lowering in old BB's a snap. It was also extremely convenient and safer when working alone. You definitely have the skills to Fab one up yourself.
This is a brilliant idea! We are taking it.
@@TheHoonigans glad I could help.
A note on the adapter shaft between the transfer box and the gearbox. On newer Defenders, they have a similar adapter between the Ford / Getrag gearbox and the LT230 and it has a lot of problems fretting, wearing then failing at inopportune moments. That leaves you with no drive at all.
The cheap fix is lots of grease, Ashcroft transmissions do an improved one. Just something to be aware of seeing as you're doing a similar thing here.
I’m so happy chair slayer is back, him and heart are like dumb and dumber, there good alone but the best together. edit:(I don’t think their dumb, it was the first iconic duo I could think to compare them to)
Kincaid Harrison Rob & Big
I like how far the tranny/t-case will sit up in there. On the jeeps the mount sits level with the frame and bolts to the cross member and yours looks to be about 5-7 inches higher in the frame so more out of the way
who ever is in charge of the music during the time-lapse.... hell yeah man!!! definitely feeling the old school hip-hop!!!
I get the impression that Ashleigh knows what she’s doing more than Scotto does 👌🏼😂
Andrew Kirk she probably actually thinks shit through lol that’s why
Your relationship is something special.👍 Ashleys the real MVP.
M B 🖤
Definitely not something we all get to experience
Love this project! Cummins R2.8 + manual in a classic Rover chassis is brilliant. Can't wait to see the finished product.
do you know how much is this R2.8?
I am actually so jealous. I wanna get one of these motors and throw it in my jeep. Absolute dream.
I love y'alls relationship on camera. It's like you're just shop buddies who both know their shit.
This rover inspired me to do an over lander setup on my 92 ford. I was thinking on it forever trying to figure out what I wanted to do with it. Thank you guys! Take it easy 🤘🏻
Man, I so wish I could do this to my Discovery. My 4.0 is still going strong, but this is just such a phenomenal upgrade. Wishing y'all the best of luck!
Now this right here is what I call some valuable family time! Making it happen together, it's an awesome thing! ✌😎
when i started watching hoonigan like a year ago. i never really like scotto. but this carcaine rehab videos. watching him work , and doing things really well has gained my respect. and his chick!?? I thought you guys were just a bunch of california burnouts lol. couldnt be happier to be wrong, and see this on the channel. shes driving a forklift for godsakes. pretty dam cool. hidden talents all these people have lol.
A reliable range rover? Now that's new
I see you everywhere :D
i mean, it's only gonna be reliable because he's replacing all te performance parts that were british xD
My td5 was super reliable and pushed 205 hp all day.
MaxSpeed “Range Rover”
@@Jtammeslehto hello there lol
I honestly didn't expect him to be anywhere near this far
Neither did we and he is on the garage today working again on it. The program works.
@@TheHoonigans He's killing it! Good shit Scotto
Couples that wrench together stay together.
One of my exes had no problem getting dirty with me...literally and figuratively...one night I fell asleep under my Nova and woke up with a warm feeling on my nether region and had to think for a minute about having that feeling in the shop! Then I realized that Min was in the shop working with me...before that realization, I was wondering which guy in the shop was I was going to have an awkward conversation with...lol...once things became clear, I almost did a somersault due to two of my favorites coming together, so to speak...most guys would love this situation...I know I did...I just realized that this little story sounds a lot like a tale that would show up in "Penthouse Letters"...lol...if they still exist...I'm not really sure as I haven't bought any magazines in around 20 years...what do y'all think?
The music on this vid totally matched his vlog style. Nice work.
Dang Scotto, must be nice to have a better half that likes to work on cars! Mine won't even help me wash mine! Great video series, I enjoy everything Hoonigans does. Thanks..✌
6:32 Scotto: "I need a little more seat time, Rob's a bloody professional" Me: "Rob has nothing but seat time" LOL
Scotto these are my favorite episodes on the channel. Keep at it!
0:30 Shart Cart looks amazing all painted up!!!
Freaking love this build, disco's have been so sick to me since I was a kid. Good to see Scotto giving his life again!
When you guys asked what should Scotto work on next, never knew you guys would read my comment.. swap the 4.0 for a tdi on the disco ! Every rover guys dream. I own a 03 d2 and man I need about 12 gs for this swap! ! F-en hooni-Mechs are crazy
Ravioli ravioli fix the goddamn land rovioli
Goddamnit, now i see that spongebob scene in my mind. Thanks alot 😂😂😂
Rob rolling by is my favorite transition montage.
Since you guys use the forklift a lot to remove and insert engines. Heres a tip that my shop did. Drill a hole that's fits like a 3/4 tow ball. That way if anything slips forward, it has a stop. Better than a c clamp
Scotto's "That's a wrap" screams are legendary!
Scotto “my welds kinda suck, I need a little more seat time” camera pans to the guy who can’t stand. 😂
Now the Land Rover is ready for some serious exploration!
Will this swap be able to be registered in California? Thinking about doing a 2.8 swap and wondering if you have any info on the subject? Thanks! Ben
Ditto
I used to think grinding sparks hurt too. 14 years in a shipyard and I don't even notice them anymore. Haha I still use all the other PPE but they don't burn anymore
You sure are a lucky man Scotto. The world needs more Ashley
Awesome man had a new 02 disco SE with 18 inch wheels full pushbar and grill package black on tan..it sat in the garage w a cover until 04 the. When I moved to Florida and drove it 22k miles in one year..it ran like a G but all the electrical interior bits just started taking a shit so aggravating..when I didn’t drive it it was amazing lol soon as I used it the English electronics failed like a sunuva 🐝..I had a beautiful setup attached to a new black and chrome single turbo Polaris MSX..got it to 185hp which was fucking meteoric levels in 04..good times man thank u for the memories man I miss my dad :(
I like how Rob just wheeling around in the background lol
I love to see a job done well and precise and professional
The couple that builds cars together stays together.
Hell yeah! It's good to see Rob again.
A cool partner who can wrench, Scotto you are one blessed brother.
And I thought this guy only did filming and production because I watched the Hoonicorn docs on netflix. Good on ya brah!!!!!
THANK YOU FOR DETAIL VIDEO
FROM AUSTRALIA
Those sleeves look awesome change the fabric to kevlar and boom new product for the shop.
scotto at 80 years old preforming "That's a wrap!" 13:04
That's a nice Forklift, three wheel electric Komatsu. Sweet
The Disco is my favorite carcaine car so far. keep em coming!!
Wait until Rail Car!!!!!
Now that is something great to do even in all full size Land Rovers.
did a built TT 4jg2 on my isuzu trooper. thinking about swapping it over to my disco 2. did you keep any of the abs features/gauges/ or is it all gone after the swap. should i keep the isuzu 5 spd or go with the disco trans? idk about these discos but my v8 just slipped a liner after i put a full terrafirma everything in it. im pretty sure i can get 400hp out of that 4jg2 if a honda is puling 1060hp and thats more than you could expect from a 4.0l. plus with the propane injection the fuel milage and egt's are great. and hows about smog, my trooper sits in a garage becuase it isnt an eoa regulated motor. how do you get around it.
Good timing with the music and the video events!
Scotto. You are very fortunate to have a woman who loves cars as much as you.
Chairslayer always comes in super clutch XD
13:06 Scotto sounds like a engine that is in any of Scotto's cars that hasnt been started in 10 years.
wow never thought we would actually see this well done.
man im a welder ive done that socks thing a couple times thats awesome... you should have cut along the toe seam, they are reusable washable sleeves then
11:23 wow, didn’t know Ken is helping Scotto!
Is there a video of this thing running or is it still being built? Just curious to see if he thought it was worth it before doing the same thing to mine.
Props. Keep it going and stay up. I'll keep watching.
Scotto you two work well together.
I'm doing the same swap with the 4JG2 and 5spd this weekend, my 2nd diesel conversion. I was talkin a bit of shit 6months ago and it seems God has smitten me. Hahaha this is dope son.
Well, I checked the video because I thought it was a ZF transmission from the Discovery... I'm looking forward to do that...
I was waiting for the socks to catch fire cause that material is real flammable.
Omg the sayings of the day are “socks sleeves” and “it’s testicular “ 😂😂
Always always always dig the soundtrack selections for Carcaine.
The commitment to "Wrapping" an episode from the testicles is real. Also, Scotto sounded like he was gonna die after that one haha! I need to get a project car again so i can stay up all night and wrench!
The discovery 1 is looking really good 👍
Transfer box good, rear axel not so good :o) Yep, HD shafts and a pegged 4-pin diff is what it will need !
I have that short thrown shifter kit in my jk wrangler and amazing!!
disco and defender chassis are different depths , ive put a few defender truck cabs onto disco chassis , thats the bit to watch out for when moving outriggers etc
When are you guys going to FINISH THIS? I'v been waiting to make my decision to go with the R2.8 or say screw it. Have not seen one complete solution finished where all the electrics function without a crazy amount of cost like using a 6 speed sequential box. Where is this project at?
Love my disco 2 03 4.6 V8 but will probably never be able to swap it and end up scrapping the old girl when she dies... Sweet to see someone doing this swap though!
I swear if you made a long sleeve shirt with the designs of the socks as sleeves tacked on to a shirt. I would totally buy one. That’s sick
Lucky lucky man Scotto not only a soulmate a wrenchmate too!!