Thank you for amazing video , I have 2016 cascades that leak oil so bad on passenger side , i took it to mechanic and they replaced a crank case filter thinking that was problem , its not fixed after watching your video I replace this and oil leak stopped, thank you very much
There are no other parts to move out, you can access the tube right away! Just remove 3 nuts in one side and 2 nuts on other end! Make sure you have new seals! It is a must!
It is not necessary to drain the oil! Just make sure before removing the pipe let the engine sit ( turn off) for 20 minutes so the oil drains in oil pan! Thank you for watching! Good luck!
Hey i tried your method on removing actuator without draining anti freeze but I couldn’t get 3/8 hose on end and maybe 2 cups went through towel into turbo tube. It should have gone down this return tube. Any ideas on what i should do?
Hi I guess the best bet would be to try to vacuum the water out of the turbo, or if you don’t have a water vacuum take the turbo apart and make sure there’s no water left in there! Please let me know how you have fixed the problem thank you
Dude thank you,you just save me some money 💯
Your welcome, this channel is all about helping each other and save big money 💰💰💰 please subscribe as i have more videos coming
Thank you for amazing video , I have 2016 cascades that leak oil so bad on passenger side , i took it to mechanic and they replaced a crank case filter thinking that was problem , its not fixed after watching your video I replace this and oil leak stopped, thank you very much
@@lilic724 i am very i happy this video is still helping people. All the best
How many lbs of torque to tighten the bolts to the turbo. I’m afraid I’ll crack the turbo
I am not sure, just tight the bolts by hand and don’t go super crazy on them 🙏
People would like to see what parts have to be moved out of the way in order to get the tube out ☝🏻
There are no other parts to move out, you can access the tube right away! Just remove 3 nuts in one side and 2 nuts on other end! Make sure you have new seals! It is a must!
Helpful video. Thank you.
Thank you for watching, i am happy I could help ❤
Do I need to drain oil to replace o ring?
When i need to change this O ring do i need to drain engine oil or not plz answer
Thanks
It is not necessary to drain the oil! Just make sure before removing the pipe let the engine sit ( turn off) for 20 minutes so the oil drains in oil pan! Thank you for watching! Good luck!
@@truckdoctor1973 thanks bro
No need to drain the oil... since the engine is not running ☝🏻😉
How long does it take to replace the tube
30 min max
Hey i tried your method on removing actuator without draining anti freeze but I couldn’t get 3/8 hose on end and maybe 2 cups went through towel into turbo tube. It should have gone down this return tube. Any ideas on what i should do?
Hi I guess the best bet would be to try to vacuum the water out of the turbo, or if you don’t have a water vacuum take the turbo apart and make sure there’s no water left in there! Please let me know how you have fixed the problem thank you
Did you get a new gasket aswell?
Where did u get new gaskets from
Frightliner dealer
@@truckdoctor1973 ty sir
The parts store..or make one ☝🏻
Did you had to drain the oil
No
How do you remove the O ring? What’s the part number?
You will take them apart when removing! It shows in the video! I don’t have a part number!
So it is easy to remove? Thanks man, this gonna safe me a lot of money.
Does the o ring needs a gasket or that’s it?
That’s it
How long did it take you to that job?
Thank you.
30 min