Ive looked into the CYC x1 PRO gen2 as a possible alternative but im not sure if it would fit or clear the bottom and the frame. I have seen a video of a different frame with a bafang mid drive but its only 2000w and more expensive.
Hub motors are serpaera than midrive they last for years and are faster I serpose its left to the indervidual I'm not sure of the name is it bang fang midrive there rubbish my friend bought one
Another cool ebike build - keep it up! I'm building one using the same frame but went for the DNM forks and an overkill battery :) A couple things I noticed which I thought I'd just point out are to add a washer between the axle nut and the frame to make a more secure connection as the bolt can slip on the paint and come undone more easily. Also (and I've learned this the hard way!) make sure to keep the motor cable far away from the rear disc brake bolts by either tying it back to the frame, making damn sure the bolts are done up tightly and even filing off the top of the bolts a bit. If not they WILL chew through the cable and you'll wish you'd spent a few minutes checking. Anyway rant over, enjoy the build! 😁
Subscribed my dude another great video I have an 8000w bike coming from China u know ali baba after watching ur video I went ahead with the purchase hope I don't run into an issue
What dropout do you have for the rear? Do you recommended building a fat tire version with the 175mm dropout they offer and the fat tire version of the fork? The only issue is finding tires that will handle those speeds.
Thanks for your video bro, what do you think of this deal I was thinking of getting 2 for my wife and I ? Third party is asking 2,580 here’s the Description: 72V 12000W Strong Ebike 1) 19/21 Motorcycle tire/Turtle tire 2) SW900 LCD Display/ Can upgrade to Color UKC1 Display 3) KKE Front Fork 4) KKE Rear Shock 5) Bicycle Seat/ Can upgrade to Motorcyle seat 6) Sabvoton 150A controller 7) 72V 45ah EVE cells lithium battery with a 5A charger 8) Tektro Hydraulic brake HD-E500 9) Half-Twist Throttle 10) Front light 11) Rear light with indicator and horn 12) PAS Max Speed 120-130km/h, Mileage 113km Also do you think max speed is 80mph? Don’t want to make mistakes
@@ENDOPRYSMyt haha, turn on the flux weakening current on 50% on your sabvoton controller through mqcon app and bluetooth, and check the max speed🤣😁 P.S. throw the color display in the trash, it is not visible in the sun, and buy sw800😄
Good video nice bike so if you do 70mph how long does your battery last and what is the range if you ride it say in the 40mph to 50 mph but yes we'll explained and the other video
m.alibaba.com/trade/search?SearchText=qs273%20kit&from=header& www.amazon.com/NBpower-Hydraulic-Motorcycle-Controller-Bluetooth/dp/B083KNQ51Z/ref=mp_s_a_1_3?crid=ESKXYVGBK1G&dchild=1&keywords=qs+273+motor&qid=1630284756&sprefix=qs273&sr=8-3 The first one is the alibaba options and the second is on Amazon. I recommend looking to Alibaba.com because you can get a much better deal. Also I would get the 5000 watt motor instead of the 8000 because it can easily handle up to 20 kw and this build will only put out 11. So the extra 15 pound weight of the 8000 watt motor is just unnecessary.
Fantastic video! I ordered a already built bike from Alibaba but also wanted a full twist throttle. You have any any if that throttle you ordered (found it on Amazon) should also work with a more powerful bike? (72v, ~50ah, 12kw)
@@jrpadilla899 I also got myself the regular 12,000w, 72v, 49ah build with all the extras (faster charger, alarm, mirrors w/ blinkers etc.) and managed to negotiate them down to $4k all in, a pretty fair price if I do say so myself for what I will be receiving. I did research for about a month before I pulled the trigger and got it because I wanted to know everything about this bike. If you have any more questions, feel free to shoot another message and I hope I can help :)
@@davidvalens3337 The bike its self I got for exactly 4 grand shipped. I'm also planning on making some youtube videos with it. I'll let you know once I have a video for it. :)
About 4400 including express shipping for some products. Pretty expensive and I probably could have budgeted a bit better .Not all that bad considering a girly electric bike with a banana seat will run you that much
I know shit about e-bikes, but if I were you, I would probably consider re-routing the motor wires and also give them a bit more slack outside the enclosure, considering the enclosure part of the bike and rear wheel mounting part of the bike will move independent of each other.
Im doing it differently than I did in the video.it was hard to pay attention to what I was doing with the bike because I was so focussed on filming. The bike is shaping up better now and the next video won’t be me filming my self building the bike. And more about what I did since the last vid, And actually getting to ride the thing.
If you had pedals on the bike single sprocket with that motor would you be able to peddle if you ran out of juice. And does anyone know a better seat that angle looks awfully high
There generic alibaba tires. Although the quality doesn’t reflect it. I have owned a Suzuki drz 125 and a honda crf100 and I like these tires more than both of theirs. They are really nice.
I wanted to learn everything about ebikes. How they work an everything. My brother has a surron so if I decide I like his more when I’m done I’ll just sell this one .
At this point, I probably should have got a surron because it would have been a lot easier and a similar price. But when this bike is done the RUclips views will be🔥
@@technicallytech6742 on Alibaba.com you can buy them in kits that you put together. They are not quite up to par with a bike like mine but you can request them to remove parts to put the price down so you can instead change them with higher quality parts such as the battery and the controller. Believe me it’s not as complicated as it looks. In a few weeks or so I may just tear my bike down again and do a step by step putting it together.
The links did not work for alibaba so if you go on there website and look up 12000 watt ebike and find the one with the most reviews that’s probably your best bet. Or you can check out Batman of Spokane’s yt. He has one of the alibaba bikes I’m talking about. And probably a good link somewhere on his channel
Shooting to get at least 10k by the end of this year been growing fast the last few weeks. I expect to hit 1k in a few days. Also my friends are looking to help me ramp up production.
I was copying someone’s build I really liked and went with the 73 because they recommended it. But I might loose the 15 useless pounds of motor in the rear and downsize to the qs205 which makes more sense. But we will see.
With the 72v 42ah - 150a battery that is coming and my 150 amp controller I should get about 17 kw peak. That’s just a guesstimate. So the 273 might not be all that necessary unless I add a extra 10a battery pack in the controller tray. Which should give me more power.
The person I was watching said that 17kw was what he was getting, although his battery is 48 ah which is why I think adding an extra 10amp pack will get you more power. Anyways the 273 will still work. Later on I might just sell it and downsize. At least my setup is not as stupid as the ones on alibaba with the 50 amp controller and the qs273.
I will try to link everything so far by the end of the day. Although I will add the option for the qs205 motor because it’s lighter and makes more sense for this build.
You say things like as you can see but I can't see when looking at the wire mess. Try a cam on a stable stand and really show what you are talking about.
I’m not sure if I’m gonna keep or sell this bike. A really good pair of forks goes for 700 plus’s So I decided to go with some cheap forks that I can always upgrade. They actually aren’t all that bad..
Yeah but build sounds cool. Also it takes some technical experience to put these together and know what parts to buy. Also there is a lot of cutting and drilling holes with power tools so unlike assembling a kit I actually have to know all the steps in my head. and that’s why these take a while to complete right. So I would say it is in between assembly and a build.
I recommend contacting the place that sold it to you or a zero 10x dealer. You can try to buy one from them. They have the connections to the factory so they can get you a stem.
I get it I did not do some things right for this video but that comes down to me just slapping things together for the video. I have had 2 months to fix any mistakes.
Great job bro you r good at building ebikes .i have a 15000w 72v 49ah with sabvoton 200A .i have the same throttle that u have and after 3 months it started giving lag and sometimes it doesn’t work.i wanna get a domino throttle bud hook it up but I don’t know how.is there anyway u can show me pls? Email or telegram???
@@ENDOPRYSMyt I asked around and it has nothing to do with the controller app i just needed to know red cable from the controller goes with what colored wire from the throttle and so on …
@mo money sorry I can’t help. I feel like if the connector has the same amount of wires as the other one in the same order you could probably just troubleshoot it and see what works. With such a low voltage going to the throttle I doubt anything bad could happen.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
The “wheels” are 300 not the tires lol
Yeah I was about to say 300$ for tires but that super cheap zoom fork? Lol
Hey what is the total $$$$ on the build?
4000
im not a huge fan of hub motors but i do love the high speed possible without a gear reduction. nice build!
Ive looked into the CYC x1 PRO gen2 as a possible alternative but im not sure if it would fit or clear the bottom and the frame. I have seen a video of a different frame with a bafang mid drive but its only 2000w and more expensive.
Hub motors are serpaera than midrive they last for years and are faster I serpose its left to the indervidual I'm not sure of the name is it bang fang midrive there rubbish my friend bought one
You got my subscription! Good job on the vid man! Looking forward to more!
Another cool ebike build - keep it up! I'm building one using the same frame but went for the DNM forks and an overkill battery :)
A couple things I noticed which I thought I'd just point out are to add a washer between the axle nut and the frame to make a more secure connection as the bolt can slip on the paint and come undone more easily.
Also (and I've learned this the hard way!) make sure to keep the motor cable far away from the rear disc brake bolts by either tying it back to the frame, making damn sure the bolts are done up tightly and even filing off the top of the bolts a bit. If not they WILL chew through the cable and you'll wish you'd spent a few minutes checking.
Anyway rant over, enjoy the build! 😁
where did you get the frame his link doesnt work
@@tombeck1960 Ali babba
Bro ur a legend probably got ur head screwed on mad I’m 19 n not doing anything like this on this level
Great job Young man
Good looking bike bro! I am doing a similar build, I appreciate you sharing your experience. Well done.
Nice Job! You remind me of a young me!
Subscribed my dude another great video I have an 8000w bike coming from China u know ali baba after watching ur video I went ahead with the purchase hope I don't run into an issue
I built one using your videos!!!
Thanks 🙏👍
how’s it turn out? i’ve been thinking abt it
Love the video! Waiting for the next one to come
Well done lad. Keep up good work
amazing bike coming and nice video🤩
The bike looks great, can't wait to see how it performs 👍
Can I build one of these without pedals 🤔🤔
I like your approach....even I understood what you were doing! Sub'd
Do you have a parts list and how much did everything cost you in the end
can u give me the exact link for the frame please? bc you put the link to ebay
Where is pt2? You must put here!!!
Someday I hope that I could do that kind of ebike, so cool love it, keep it up, new subscriber here from Philippines..
Can you also make a video of all the parts you used
Watch my third newest video👍
I like the suron tail mod I'ma have to do that one
Are both wheels 19 inch looks nice
i really like that frame will the bafang mid drive kit work with that frame?
Cool idea
Nice Build!!
Awesome video, almost done building my bike. Can you make a video on how to wire up a headlight?
Looks good, nice build!
Hey thanks. Your videos on building your bike inspired me to do the same.
Is that a 26x4 fork?
Yes
@@ENDOPRYSMyt no, is it 26x3.0 fork, fatbike tire you can not install on zoom 680dh
nice build!
Could you please share the link of your rear and front tires? I know rear has the motor
m.alibaba.com/trade/search?SearchText=qs273%20motor%20kit&from=header&
It’s the third option down
If you look up 19 inch front motorcycle tire on alibaba you will find it.
Nice bro ✌
is this the tire size 26 inch if so do 90/90 fit on them?
what size is the front tire and what size is the rim, please
What dropout do you have for the rear? Do you recommended building a fat tire version with the 175mm dropout they offer and the fat tire version of the fork? The only issue is finding tires that will handle those speeds.
Do you know how to fix charging problem it’s no the charger I bought a new one, the bike it’s just like yours!!
Follow this channel on Instagram @endoprysm for updates on this build.
Where did you get the saddle? I planning out an enduro ebike just like yours but I wanted a 1000w or 1500w hub motor.
Is this the model with a wider tail for the back tire? I believe it's 170 to 175 mm wide drop out?
Put fuse before blown up controller
Thoughts on tire size? I’m ordering my motor and they have 19” and a 21” tire. I’m 6’1”, and thinking of doing the 21”. Thanks
Probably go 18 or 19. I’m also tall and 19 works great for me. The smaller the rear tire size the faster the acceleration too.
Ok thanks
Can you make a cycle for me here, how much will it cost to send it to India?
Thanks for your video bro, what do you think of this deal I was thinking of getting 2 for my wife and I ? Third party is asking 2,580 here’s the Description:
72V 12000W Strong Ebike
1) 19/21 Motorcycle tire/Turtle tire
2) SW900 LCD Display/ Can upgrade
to Color UKC1 Display
3) KKE Front Fork
4) KKE Rear Shock
5) Bicycle Seat/ Can upgrade to Motorcyle
seat
6) Sabvoton 150A controller
7) 72V 45ah EVE cells lithium battery with
a 5A charger
8) Tektro Hydraulic brake HD-E500
9) Half-Twist Throttle
10) Front light
11) Rear light with indicator and horn
12) PAS
Max Speed 120-130km/h, Mileage 113km
Also do you think max speed is 80mph? Don’t want to make mistakes
Sounds good. Top speed is probably 80 miles per hour. But they also probably got that by suspending the motor in air and running it. More like 65 mph.
@@ENDOPRYSMyt haha, turn on the flux weakening current on 50% on your sabvoton controller through mqcon app and bluetooth, and check the max speed🤣😁 P.S. throw the color display in the trash, it is not visible in the sun, and buy sw800😄
Bro could I put a delfast 3.0 battery on a bike?
You could yes.
What brakes did u use
Hey can you link what u used Brody?
What about the pedals?
I ❤❤ bro🤜 from India🇮🇳
Tf
💪🇮🇳🇮🇳🇮🇳🇮🇳🇮🇳💪🤘🤛got a problem with it bro?
❤️
Where did you get the frame from
Could you please send the link for the front fork
www.amazon.com/Zoom-Suspension-Magnesium-Downhill-Threadless/dp/B000LF7M96/ref=mp_s_a_1_3?dchild=1&keywords=zoom+fork&qid=1630631050&sr=8-3
@@ENDOPRYSMyt are you willing to share your whole parts list, and overall costs?
Good video nice bike so if you do 70mph how long does your battery last and what is the range if you ride it say in the 40mph to 50 mph but yes we'll explained and the other video
Very nice build! I was wondering how tall you are?
I’m about 6.1
What size frame do you choose?
yo, could you put links to all the parts?
Hey where can you buy a recon bike frame?
Hey! Would you consider this motor overkill? How fast does it go?
A Qs205 motor would have been better because of its lighter weight but I’m fine with this motor.
Hi bro ..very nice project ..can you share the motor and controller kit link ?
m.alibaba.com/trade/search?SearchText=qs273%20kit&from=header&
www.amazon.com/NBpower-Hydraulic-Motorcycle-Controller-Bluetooth/dp/B083KNQ51Z/ref=mp_s_a_1_3?crid=ESKXYVGBK1G&dchild=1&keywords=qs+273+motor&qid=1630284756&sprefix=qs273&sr=8-3
The first one is the alibaba options and the second is on Amazon. I recommend looking to Alibaba.com because you can get a much better deal. Also I would get the 5000 watt motor instead of the 8000 because it can easily handle up to 20 kw and this build will only put out 11. So the extra 15 pound weight of the 8000 watt motor is just unnecessary.
Does the wheel abs brakes/ others come when the bike comes or after or pay seperate
Fantastic video! I ordered a already built bike from Alibaba but also wanted a full twist throttle. You have any any if that throttle you ordered (found it on Amazon) should also work with a more powerful bike? (72v, ~50ah, 12kw)
What supplier did u use. Which bike
@@jrpadilla899 I also got myself the regular 12,000w, 72v, 49ah build with all the extras (faster charger, alarm, mirrors w/ blinkers etc.) and managed to negotiate them down to $4k all in, a pretty fair price if I do say so myself for what I will be receiving. I did research for about a month before I pulled the trigger and got it because I wanted to know everything about this bike. If you have any more questions, feel free to shoot another message and I hope I can help :)
Which supplier did u use
How much did your bike cost?
@@davidvalens3337 The bike its self I got for exactly 4 grand shipped. I'm also planning on making some youtube videos with it. I'll let you know once I have a video for it. :)
That is 1 sweet bike, how much for total build ?
About 4400 including express shipping for some products. Pretty expensive and I probably could have budgeted a bit better .Not all that bad considering a girly electric bike with a banana seat will run you that much
Hahahha thats terrible for 4 grand, i built my full size e dirt bike 15kw peak motor 5kw battery for 2.5k usd
@gapininja the less experienced the more money spent. Also that is normally how much these builds cost.
@@ENDOPRYSMyt yes DIY is the way
How did you add music I get copyrighted
Look up non copyright beats or non copy right stake type beats. ( I like those)
IS IT QS205 MOTOR
I know shit about e-bikes, but if I were you, I would probably consider re-routing the motor wires and also give them a bit more slack outside the enclosure, considering the enclosure part of the bike and rear wheel mounting part of the bike will move independent of each other.
Im doing it differently than I did in the video.it was hard to pay attention to what I was doing with the bike because I was so focussed on filming. The bike is shaping up better now and the next video won’t be me filming my self building the bike. And more about what I did since the last vid, And actually getting to ride the thing.
My brother his friend and another friend of mine all have Surrons. So when the bike is done with I’m interested in comparing them.
@@ENDOPRYSMyt Looking forward to the next video :D
what motor you using?
In this video I was using a qs273 but now I use a qs205
If you had pedals on the bike single sprocket with that motor would you be able to peddle if you ran out of juice. And does anyone know a better seat that angle looks awfully high
Song?
What about the rear disc?
I had it off because I did not have the right spacer.
IDK man, my dual sport tires were like 60 bucks a pop for my motorcycle. How were these 300? 0.o
@@ENDOPRYSMyt ohhhhh
The full wheel was 300 with shipping and taxes. I could have gone cheeper but these are super good quality and will last a long time.
The tires were like 60. But the rims were expensive.
@@ENDOPRYSMyt what are those tires btw
There generic alibaba tires. Although the quality doesn’t reflect it. I have owned a Suzuki drz 125 and a honda crf100 and I like these tires more than both of theirs. They are really nice.
What is the inner width of the frame? What wide battery will come in?
140mm
Why not just get a surron?
I wanted to learn everything about ebikes. How they work an everything. My brother has a surron so if I decide I like his more when I’m done I’ll just sell this one .
At this point, I probably should have got a surron because it would have been a lot easier and a similar price. But when this bike is done the RUclips views will be🔥
@@ENDOPRYSMyt felt the same way our builds are very similar my bike is just black. Fully street legal
where did you order the parts from?
A mix of Amazon ebay and alibaba
REALLY ( HELLL 0 )
Where to buy?
I put a list of all the parts in my newest video
@@ENDOPRYSMyt so I can’t just buy it halfway built?
@@technicallytech6742 on Alibaba.com you can buy them in kits that you put together. They are not quite up to par with a bike like mine but you can request them to remove parts to put the price down so you can instead change them with higher quality parts such as the battery and the controller. Believe me it’s not as complicated as it looks. In a few weeks or so I may just tear my bike down again and do a step by step putting it together.
@@ENDOPRYSMyt could you link me to it? (If you could that’d be great!)
The links did not work for alibaba so if you go on there website and look up 12000 watt ebike and find the one with the most reviews that’s probably your best bet. Or you can check out Batman of Spokane’s yt. He has one of the alibaba bikes I’m talking about. And probably a good link somewhere on his channel
Make sure you don’t let the rear wheel eat into your motor wires, it put my bike out of order for a year
My motor wire strays far from the wheel.
How heavy is it?
like 180 pounds
Nice work 💪
Sub + 👍
Keep more video's coming 📹
10k at the end of 2022🔥❤️
Shooting to get at least 10k by the end of this year been growing fast the last few weeks. I expect to hit 1k in a few days. Also my friends are looking to help me ramp up production.
Hey how did you build the frame. Please can you share. I want to build one
www.ebay.com/itm/223609867251
@@ENDOPRYSMyt What size did you choose?
I have 8000w motor with 200a sabvoton controller and 72v battery max speed is 55mph , how you making 70mph on it ?
What size bms do you have in your battery?
@@ENDOPRYSMyt i have smart bms ANT 300amp
@@shavkat84 then I’m really not sure. Is your motor 3.5t or 5t?
@@ENDOPRYSMyt it says 3.5T
Did you actually check it with gps
why qs273 ? why not qs205?
I was copying someone’s build I really liked and went with the 73 because they recommended it. But I might loose the 15 useless pounds of motor in the rear and downsize to the qs205 which makes more sense. But we will see.
@@ENDOPRYSMyt yea, thats my point.. how much kW you want in peak?
With the 72v 42ah - 150a battery that is coming and my 150 amp controller I should get about 17 kw peak. That’s just a guesstimate. So the 273 might not be all that necessary unless I add a extra 10a battery pack in the controller tray. Which should give me more power.
@@ENDOPRYSMyt 150a bms + cont in 72V system is 10,8kW :P
The person I was watching said that 17kw was what he was getting, although his battery is 48 ah which is why I think adding an extra 10amp pack will get you more power. Anyways the 273 will still work. Later on I might just sell it and downsize.
At least my setup is not as stupid as the ones on alibaba with the 50 amp controller and the qs273.
That’s mad
Hii bro love from India ❤️...
Get the parts done soon ... I'm waiting
Links the products
I will try to link everything so far by the end of the day. Although I will add the option for the qs205 motor because it’s lighter and makes more sense for this build.
You say things like as you can see but I can't see when looking at the wire mess. Try a cam on a stable stand and really show what you are talking about.
how much is it bro
Total price is about 4000 with taxes.
I don't think a jig saw gonna fit.
"They got bad reviews, but they look good." Can't find anything wrong with that logic!
I’m not sure if I’m gonna keep or sell this bike. A really good pair of forks goes for 700 plus’s So I decided to go with some cheap forks that I can always upgrade. They actually aren’t all that bad..
That is kids logic 🤔
@@ENDOPRYSMyt how much was your fork
@@ihavetowait90daystochangem74 120 bucks.
@@ENDOPRYSMyt where i really need one like this for my fatbike conversion cant find any
Use slime in your tire if you don’t have a tube…
That didn't dob70mph more like 48mph why put mph on spend omerta not working properly
Could have also flipped the bike upside down
All China Made?
sure
This is not a build.. it is an assembly video...
Yeah but build sounds cool. Also it takes some technical experience to put these together and know what parts to buy. Also there is a lot of cutting and drilling holes with power tools so unlike assembling a kit I actually have to know all the steps in my head. and that’s why these take a while to complete right. So I would say it is in between assembly and a build.
When you are side to build it??🤨 anyway your way to young to have expensive ebike
You call me to young to have and e bike. yet you can’t formulate a readable sentence
@@ENDOPRYSMyt 🤣 this kid doesn't respect people
@@ebikerider6273 Give respect and you earn respect, rider-san. If he has the money, why not spend it making something useful and valuable?
@@lawyerengineer I have respect its true now days kids don't know better to drive a expensive car or ebike and in one point they always crash
@@lawyerengineer he is a kid
Get some torque arms
I got some and figured out the problem
@@ENDOPRYSMyt do you know where to get a zero 10x stem mine snapped on my and now i have to ride a peddle bike to work 😭😭😭
I recommend contacting the place that sold it to you or a zero 10x dealer. You can try to buy one from them. They have the connections to the factory so they can get you a stem.
I need for.....
прыгнешь на кочке и провода подвеской перерубит
I have moved the wires
Sorry , I'm looking for people who build bike no mfor kids that screw bikes together
I didn't have the right tool so I had to hammer them in......Made me quit watching...
I hammered in the fork cups which is what people usually do.
I get it I did not do some things right for this video but that comes down to me just slapping things together for the video. I have had 2 months to fix any mistakes.
@@ENDOPRYSMyt We all do, sometimes its trial & error. cudos for taking on the project, looks good!
Man this is very boner
🤨📸
Great job bro you r good at building ebikes .i have a 15000w 72v 49ah with sabvoton 200A .i have the same throttle that u have and after 3 months it started giving lag and sometimes it doesn’t work.i wanna get a domino throttle bud hook it up but I don’t know how.is there anyway u can show me pls? Email or telegram???
You can probably go into the controller app and adjust the throttle voltage and that might help you with your one throttle. I have a vid up on that.
@@ENDOPRYSMyt I asked around and it has nothing to do with the controller app i just needed to know red cable from the controller goes with what colored wire from the throttle and so on …
@mo money sorry I can’t help. I feel like if the connector has the same amount of wires as the other one in the same order you could probably just troubleshoot it and see what works. With such a low voltage going to the throttle I doubt anything bad could happen.
@@ENDOPRYSMyt gotta temper with the cables till I get the right combo
@@momoney6272 👍
Can I have a link for the motorbike seat please
do u have 19inch tires?