Sighting and Zeroing the CBE Hybrid Engage Sight
HTML-код
- Опубликовано: 15 сен 2024
- There are already a few videos out there on how to sight in your sight. Still fairly new to archery, I hope this video helps you figure out what the other videos didn't help me with.
Great video Kyle. Thanks
Hey man Im new to archery. Just came home with a new 28 and this site in the single pin version. I’m so confused
Don’t think that’s going to work out to well.
It worked out just fine for me. Just have to make sure your 60 yard pin is set, then walk in to 30 and move your housing so that you are shooting center at 30 with your 60 pin. Make a mark with a sharpie and measure your gap. Nothing to it.
As long as your gap between 30 and 60 measure the same on your engraved sight tape as your sharpie marks, that only tells you how far to move your housing. Make sure your sight is at the home setting and move the indicator to the correct home yardage. Gap distance (the distance your housing travels) remains the same. I hope this helps!
Yes, you are correct. With your
Red indicator needle sitting at 60 yards that would be your home. Your other pins would be set at 20,30, 40,50, and 60. While your red indicator is set at the 60 home yard mark 😉👍 ... Just a little FYI, use a small amount of blue loctite on all of your screws. Over time, those screws will loosen up and could cause you some issues down the road. Nice video and happy shooting 😉👊🇺🇸
Your not supposed to touch the front screws. You should touch the set screws in the front.