0:07 "This is my truck. Everything's pretty standard" 0:22 Here you can see the absolute utilitarian genius of the Nissan Hardbody climate control system. This system gives you complete control over the ventilation capabilities (not dumbed down as in the 3 control climate systems that were prevent shortly after this). You can adjust all the regular stuff: temp, fan speed, a/c on/off. But you have complete control over the input which is missing or forced for you on most cars now. The best part was that if the system fan was off, you could still get a vent air if you set the air input to outside air. Close it if you don't want it. You could also do interesting things like pump A/C to your defroster or feet only,or air condition the heater (works great for defrosting windows).
for anyone watching having idle issues like this guy and have a bov that vents to the air it will idle and maybe bog and die and its cause the maf is before the bov which means that the engine is losing air that it thinks it there so you either recirculate or put the maf on the coldpipe (or hot but it seems to make the maf die quicker due to intense heat)
This vid is 2 years old for a real turbo d21& sounds sick. Do you have a parts and cost list for everything? Did you use a piggy back ECU? Please update. I am looking a similar setup. Thanks
Nice truck, I give you mad credit on the diy but the intercooler pipe looks horrible. I understand its a work in progress though. Keep on working and ignore the haters
Hey did you ever find out what was the problem my boost ka does the same to me and i cant find the problem i was trying to read all the coments to see if say any results but all this people just butting a bunch negtive coments
if you know anything about them you would know that the speedometer and odometer are ran by a gear that even went out on my 3.0 v6 95 nissan xe and its the most common problem with these trucks, i run a gps for speed as well
Ive just did a turbo in my 96 HB. Im having some idle issues mainly at cold start up and some time the truck shuts off if i hit the trottle real quick and let off the engine shut off.. I was wondering did you ever get your HB running right and if so what ecu did you use im using an Apexi piggy back system.
I am planning to do similar stuff to my '95 Pathy!! I was wondering, how exactly did you mount those tweeters in your door panel beside the speaker? I basically have the same door panels, and I have aftermarket tweeters, but wasn't sure how I would mount it, so they are behind the door panel, in the metal!! lol I would appreciate tips!! Great truck!!
You should custom make those and sell em because i cant find any for a ka24e adn its starting to piss me off becasue you can only do so much you can do.
could you get back to me on this rreally need some help!! is that the ka24det??? out of a 240sx? then you just put thetop end on the original block or motor swap with the turbo on that?
0:07 "This is my truck. Everything's pretty standard"
0:22 Here you can see the absolute utilitarian genius of the Nissan Hardbody climate control system. This system gives you complete control over the ventilation capabilities (not dumbed down as in the 3 control climate systems that were prevent shortly after this). You can adjust all the regular stuff: temp, fan speed, a/c on/off. But you have complete control over the input which is missing or forced for you on most cars now. The best part was that if the system fan was off, you could still get a vent air if you set the air input to outside air. Close it if you don't want it. You could also do interesting things like pump A/C to your defroster or feet only,or air condition the heater (works great for defrosting windows).
I have the same truck, fastest 4 cylinder I've ever driven stock
for anyone watching having idle issues like this guy and have a bov that vents to the air it will idle and maybe bog and die and its cause the maf is before the bov which means that the engine is losing air that it thinks it there so you either recirculate or put the maf on the coldpipe (or hot but it seems to make the maf die quicker due to intense heat)
0:14 caveman foot
C C what harness u use for intall tha motor n the hardbody im doing the same motor n i need help thanks
Wow, those are some.. quality.. welds.
I mean if they get the job done they get the job done.
@@DaisyHead666 why did you reply to a nine year old comment lol
before this video is 30mb 😭😭 take me back
Thought hard body's were only ka24e stock? did u swap the dual cam in?
littlman284 the newer models had the dual cam
now that's craftsmanship
mucus weld 101... like a pro
major cluster fuck pun intended ............It sounds like a fucking airplane
This vid is 2 years old for a real turbo d21& sounds sick. Do you have a parts and cost list for everything? Did you use a piggy back ECU? Please update. I am looking a similar setup. Thanks
What harness and ecu did you use?
Nice truck, I give you mad credit on the diy but the intercooler pipe looks horrible. I understand its a work in progress though. Keep on working and ignore the haters
I would like to turbo my frontier lol
nice racing shoes
Hey did you ever find out what was the problem my boost ka does the same to me and i cant find the problem i was trying to read all the coments to see if say any results but all this people just butting a bunch negtive coments
After all that work done on the truck.... And your speedometer doesnt work?? Nice paint work dough
if you know anything about them you would know that the speedometer and odometer are ran by a gear that even went out on my 3.0 v6 95 nissan xe and its the most common problem with these trucks, i run a gps for speed as well
holy wires batman
Why is it idling so high?
Ive just did a turbo in my 96 HB. Im having some idle issues mainly at cold start up and some time the truck shuts off if i hit the trottle real quick and let off the engine shut off.. I was wondering did you ever get your HB running right and if so what ecu did you use im using an Apexi piggy back system.
TEE Enoch hes asking a question you fucking idiot
lmao, and i care why?
Thats alright i got a mega squirt ecu now, imma mak3 you put that lac back in da shop
+TEE Enoch you make yourself look like an idiot publicly on the internet . just trolling yourself /
Fuck off mate if your not going to help dont comment
Why are you barefoot in the middle of nowhere?
di the 24de bolt right into the stock motor mounts?
how did the motor mount up? any modications?
thats not the truck version its the car version. the truck version is rear sump. hint the oil pan mod he had to do. excuse me i mean me lol
isn't it fun driving from Ramona to Julian then to the lake?
I am planning to do similar stuff to my '95 Pathy!! I was wondering, how exactly did you mount those tweeters in your door panel beside the speaker? I basically have the same door panels, and I have aftermarket tweeters, but wasn't sure how I would mount it, so they are behind the door panel, in the metal!! lol I would appreciate tips!! Great truck!!
bad ass..that setup in a 240sx is nice so a truck is probably even funner ..whats the numbers???
do you mean rear sump.....for the oil pan?? pls tell
If you can't bolt down your guages I feel sorry for everything else
@schmauster920 what year is your truck
What manifold did you use
yas queen
i like your shoes :B ...
im sorry but that pipe that comes off the turbo that goes to the other side of the motor is pretty rigged..
What ever happened to the truck, is 2018
You should custom make those and sell em because i cant find any for a ka24e adn its starting to piss me off becasue you can only do so much you can do.
What kind of turbo you running?
Damn i wish you would come over and help me work on my truck, i am having troublr getting it started
it sounds like a lawn mower lol
but its all good bcus i have the same type of truck haha
turns starter over while engine running...awkward! where you at on this dude? still have it?
dood i have a 95 hardbody 4x4 and the speedo broke too
what year is it?
i think you mean SET. that mottor is sohc, not dohc.
Used a potato to do his welds.
what did that cost to do?
i like it but the reson your boost build so damb fast is cause you have no front mount
could you get back to me on this rreally need some help!! is that the ka24det??? out of a 240sx? then you just put thetop end on the original block or motor swap with the turbo on that?
julian CA?
nice tacks haha
Motor mounts can I have 📷
The truck has a stock ka24.
Trucks also use this motor.
not these lol only sohc
My nissan frontier 4x4 2000 the year has the ka 24 twin cam 16 valve on it is indestructible
150 hp from factory ????????
everythings pretty standard ... lol
your runnin on empty lol
wow, not a clean swap, very poor job fabricating
93 Nissan 240sx ka24det? Lol
Sounds like an airplane engine lol complelty trashed his nissan....
completely trashed his Nissan...shoes
fail= turbo intake lol
O.o
these trucks are fast stock so slow no
Ffs son learn something
Should of did it right 😓 completely trash
How do you know how much gas you have??