DeepCool MORPHEUS - THREE LAYOUTS IN ONE CASE!
HTML-код
- Опубликовано: 8 сен 2024
- When you have three layouts to choose from, you can really do wonders. This is a new addition to the case department from DeepCool called MORPHEUS. This trully is a shapeshifter!
Where to buy:
►DeepCool MORPHEUS (black): newegg.io/nc83...
►DeepCool MORPHEUS (white): newegg.io/nce7...
►DeepCool LT720: geni.us/tuKHOi
►DeepCool ASSASSIN IV: geni.us/rhx97
SUGGESTED PRODUCTS:
►CableMod Cables: geni.us/TAYTe
►GT Omega Chairs: bit.ly/GTOmega...
►UPerfect Monitors: bit.ly/uperfec...
►MOZA Racing Gear: bit.ly/MOZARac...
►Subscribe here: bit.ly/3erJB33
►Join my Membership to get access to perks:
/ pccrazydario
My recording gear:
►Camera (video): Blackmagic PCC 6K Pro: geni.us/yZlAn
►Lenses: Samyang CineLens VDSLR MK2 kit: geni.us/nUoaK
►External monitor: ATOMOS SHINOBI: geni.us/IFGQ25k
►Storage: AngelBird Match Pack Blackmagic PCC 6K PRO: geni.us/0bQA
►Lighting System: NANLITE FS-150: geni.us/09WC3A
►Softboxes: NANLITE SB-PR-90-Q: geni.us/UT0RA
►RGB Tubes: NANLITE PavoTube II 6C: geni.us/HHd76
Music by Epidemic Sounds:
►Lofive - Yhello
*************************************************************************************
BUY ME A COFFEE ☕☕
If you think I need more energy, you can show your support by buying me a coffee! Supporters get a shoutout in the next video! No subscription or sign-up required!
►LINK: www.buymeacoff...
*************************************************************************************
NOTICE: Amazon links provided are linked to my Amazon Affiliate account and support the channel at no extra cost to you.
#deepcool #morhpeus #assassiniv
![The Zima Cube is... GOOD now? [ft. Zima Cube Pro]](http://i.ytimg.com/vi/7KKhgzVjtX8/mqdefault.jpg)
Thank you for this wonderful review. Your review was really the decisive point for me to buy the case. I bought two, one for me and the second for my son. We both use Arctic 420 and strix 4090 and the cases perform really well. Thank you!
dam, lucky kid. this case seems amazing
Did you mount the arctic 420 on top?
@@m.h_productions yes
Hi, great video! Thanks for the review
I´m currently preparing to build with it and i´m confused by the trinity-fan-setup by factory on the side panel.
Those fans are working as exhaust fans due to the way they are installed on the side, dont they? Sadly i couldnt find any additional information on the airflow direction of the fans... Wouldnt it be more useful to turn them around and use them as intake fans on the side panel (or front panel as done in the video)? I assume the trinity-fans by deepcool are not reverse blade fans or anything aswell right? Thanks for help in advance!
How did you manage to install the display in dual chamber?
waiting Deepcool LT 420mm
Waiting for
It too the 13900k overheats to much
14900kf@@Goldmanknight
Where you able to customize the color of pre installed 140mm rgb fan?
What`s the clearance on top and front for radiator+fan unit (dual chamber set)? Will it fit distro plate on side panel when the front will be occupied by 420 rad with push/pull config? I know that`s a lot of questions but you`re one of the first who`s put hands on it and this review is showing quite a lot. Kinda sad when I was going to set dual 420s in Fractal 7XL with tube reservoir and I saw THIS one :/ Awesome case. Cheers! Edit: front panel does have dust mesh! I`m blind.
Don't worry about the question. That is why I am here after all. What's the point then if I don't answer them. 🤗
Top: radiator + fans (just to be confortable with EPS cables) = 80mm
Front 1: radiator + fans (if you want to place a side radiator) = 55mm
Front 2: radiator + fans (if you only place fans on the side) = 170mm (taking into consideration the GPU I was using)
Side: radiator + fans (if you use the front rad+fans 55mm) = 140mm (leaving a bit more than 10mm from the GPU in vertical position)
Bottom: radiator + fans = 52mm (but then you can't place the side rad+fans up to those dimension)
If you want to place side distro, I would suggest something around 120mm fans of width, then you'll get that difference from 140mm to 120mm for the front. I don't think you would be able to do push pull combo if the pump is on the distro.
Hehe, yeah, it does have dust filter on front, top and bottom, complete sides. 😉
@@PCCrazyDario Much appreciated! So this means it`s pretty close to the 7XL considerating top and front. As far I measure I`d able to put 45 mm radiators in front as P&P and 45 mm with single fan on top. The difference is the bottom space. I can imagine horizontal tube like 300 mm long in there.... Well, filling will be pain in the arse , but the look ;). And vertical holder in the price of case here. Fractal Flex 2 is 60 Euros extra more... Ant the top mount in 7XL is struggle for 420 rad, because of side window catch. I think I`ll reconsider my final choice :D. Better get myself to find buyer for my Fractal.
@@juliuszgimbut763 Not a problem. No no, 55mm is with the fans. If one set of fans is 25-27mm, you'll have 28-30mm for the rad if you go with the radiator on the side. Unless you really find or design a flat distro on the side, you can go with thicker combination. This is without touching the brackets of the 140mm fans placed on the side. If you go with 120mm distro, you'll have additional 20mm of space on that, so 48-50mm. Soooo, It would be a tight squeeze. I'd rather place a distro on front and go with a side rad.
@@PCCrazyDario Shame they don`t give glass front panel. But it wolud be close to LianLi then ;)
Yea there us the ch780 however
It only has the dual chamber so..
Hey man in layout 1 can I fit a 420 arctic freezer ii on top without bumping into the motherboard? Thanks.
In dual chamber mode, can you put the GPU in the regular way (not in vertical) if it was a 4080 Super TUF ?
I ended up returning this case. Why? Two reasons:
1. The hard drive cage is absurdly difficult to get to and adjust. I had to completely take apart the bottom of the case to unscrew it.
2. The Digital readout is too damn bright and stays on when the PC is off and there doesn't appear to be an option to adjust the brightness. And worse? It stays on when the PC is turned off. How fucking stupid is that?
Deepcool never fails. They have some killer ideas, but always manage to ruin any system with a few bonehead decisions....
I can’t remember the HDD cage, but it is strange for the DIGITAL screen. Literally every time and on every digital product they released, the screen turned off at the same time when the PC did. I am not defending DeepCool of course, but something might be off with your motherboard or electricity. I know there is a catch with some of those two that make the LEDs light up even after shut down. But regardless, you got your money back. I understand the frustration.
420 LF III pusch and pull in top ?
I'll have morpheus tomorrow. I wonder if I can fit 3x Silverstone Shark Force 160 fans in the front. I'm moving stuff from Fractal Torrent Compact. Thank you for the review, maybe the case will not look so empty if I squeeze in a few chickens😊
Filling it up with fans will fix the emptiness for sure. :) And of course, I don't take it as a negative... But you do need to fill it up haha
is the case already one sale? I didnt see it released, yet.
@@PCCrazyDario You were right, there is an emptiness inside... Good news 3x160 mm silverstone shark force 160 fits the front. The lower fan is screwed on with two screws, but that's not a problem. The airflow is amazing.
ruclips.net/user/shorts0xHKSzd50qw
My msi motherboard is not fitting. Did you have any issues?
They should sell one with a pre configured dual chamber.
CH780
Thanks for the info i have no idea there is a 780.
no one mentions it enough@@francisdumlao8040
Looks... good. ...but where I instal my 4x 3.5 HDD?
hdd ew vintage ssd instead ftw
Obligatory engagement comment to support the algorithm.
Nice video bro i want to buy this case will it fit the arctic freezer 420mm on top?
It says it will fit a 420mm radiator. But the real length of the arctic liquid freezer II 420 is 458mm exact. I'm confused as well because I'm also looking for a case that can fit my arctic liquid freezer II 420 and is unsure what measure matter.
I've sent a ticket to the company asking if it will fit. I will give you their answer as soon as I get it.
@@m.h_productions thx dude
I've gotten a reply! And they said YES, it will fit on the top. Even better, it won't interfere with the motherboard since the MB mounting can be adjusted and allows radiators with a total thickness of 95 mm. I also found a guy in the comment section of another video on the deep cool Morpheus that has his Arctic 420 mounted on top without any problems. I looked into the specs of this case and its total length is 528 mm, so plenty of room to fit that 458 mm long radiator. So on that note, I'm probably going to purchase this case this week. I can personally come back to you and confirm that it fits (or not😬) when I've got it and have the radiator installed. That is, if you still are unsure about getting it.
@@m.h_productions u make my day thx dude morpheus white with white liquid freezer 3 😍
i am having a problem with the digiatal software displayng wrong temps :(
make sure you have the latest bios ,maybe take the wrong reading from diferent sensor ,also i had problem display not showing the temps at all and i had to make some changes on my motherboard settings to work I had to set legacy usb support to AUTO , and set XHCI hand off DISABLED , after this i was able to install the software ,something was wrong wuht my usb ports on my motherboard msi x570s edge ,also make sure you install the right app ,hope this helps
@@marchev1982 omg ty ty
@@marchev1982 which usb port do I plug it to
The one closest to the pch or the cpu
Aka
Left or right?
@@Goldmanknight well my specific motherboard have 2 usb connectors and they are at the bottom next to the power /reset / plugs it's say usb on the connector , check the manual
@@marchev1982 I have jusb1 and jusb2
This would be a nice case but i hate how the front IO cables are so visible and just dangling there. Would be nice if there was some cover plate/cable raceway to hide them.
True, but since you have possibility to change into two different, and even three modes, you can use a plexiglass panel, create it on your own and manage it nicely. :D
@@PCCrazyDario Yeah you could do all sorts of things with it. Unfortunately i dont have the means to do any kind of moding really. No tools or place to do that kind of stuff.
Early gang 🤙🏾
Cheers! :D
The concept is good and interesting, but it is too much work for me 😂
Got you. Well all to personal preference. ;)