Это видео недоступно.
Сожалеем об этом.
Turn Your Pen Blank Cut Offs Into New Blanks
HTML-код
- Опубликовано: 19 мар 2018
- I had a bunch of cut offs left over from the Honor Flight pen turning event that my turners club held. They were just to nice to waist so I decided to glue them up and make some interesting segmented pen blanks.
Regards,
Bob
Preparing Acrylic Blanks for Turning: • Preparing Acrylic Blan...
Preparing Wood Blanks for Turning: • Preparing Wood Blanks ...
My Info:
Facebook: / 992853487406788
Instagram: @RJBWoodturner
Twitter: @RJBWoodturner
E-Mail: RJBWoodturner@yahoo.com
Be sure to check out my second channel, WhatchaDoinBob, it’s a VLOG about what I’m doing at any given time. / whatchadoinbob
A little late, but just wanted to say how much I appreciate your recognition of our veterans. What a great idea to make a special pen and pass on to a veteran. I am just getting started in pen turning, but will make it a point to make a pen just to give to a vet. Thanks for the inspiration.
Thank you,
It was my pleasure.
Regards,
Bob
I realize that this is an older video but your idea of giving to the vets is a great one. I didn’t serve but my father in law and both of my boys have. I appreciate the freedoms that their sacrifice affords me. Well done Bob.
Thank you Levi,
Regards,
Bob
I to make pens. Have been for over 25 years. I finally glued my thumb to a blank. CA glue dribbled down onto it and I did not notice. Note to self: keep plenty on the Uncure fluid around and it is great to have the wife help un-stick the blank...after she stops laughing.
LOL, everyone does that at least once even if the don’t admit it. 😃
I want one. I am a veteran myself, and I thank you for supporting my fellow veterans.
Thank you Peter,
You’re entered. Thank you for your service.
Regards,
Bob
Love it. I have a variety of cutoffs of differing widths. It’ll be fun to experiment with. Thanks for the inspiration!
Thank you Derek,
You will have some uniques blanks using this process.
Regards,
Bob
I know this video is old. At this point it appears to be five years old. Just like most Americans, I know that veterans have given a lot, have sacrificed a lot, and basically when someone signs up for the military, they have increased their odds of dying at an earlier age than they would have otherwise. My main point is that I want to thank you for reminding me what a huge sacrifice both veterans and their families make and have made to protect all of us. I also think it’s awesome that you were doing something concrete to show your thanks, and multiplying that gift of thanks in such a creative manner.
Thank you Scot,
I know of many people who have made pens because of this video and given them to veterans. I’m thankful for what I have and wanted to show my appreciation.
Regards,
Bob
I know its an old video, but I've just seen it. I absolutely love the "give away to a vet" plug. I am a 20yr Navy vet and things like this mean the world to me. Thanks again!
Thank you for your service. It was the least I could to and it was truly my pleasure.
Regards,
Bob
Sure wish I'd seen this video in time to get one of your blanks!! But because of your idea! I turned a red white and blue pen last night and i will carry it until i bump into a vet and it will be given to them!!!
That is awesome John! Thank you for making one of your own and for honoring a vet.
Regards,
Bob
I realize this is five years old but I wanted to jump on here and thank you for recognizing our veterans. Thank you!
You’re very welcome. It’s not much but maybe it inspired others.
Regards,
Bob
RJB. Went to large screen and figured it out. Thank you.
Thank you.
Hello Bob. I know the give away is over. However if you EVER decide to do this again, I would be extremely humble and honored to receive one. I am a veteran and I love this idea. I recently attended "Women Veteran's Working in Corrections" and met so many amazing female veterans. I would love to have something from you to take the next time I attend. Of course I would be making a few myself :-)
Thank you. I love saying thank you to our veterans, I appreciate what they’ve done for and sacrificed for our country.
Regards,
Bob
I want one!!! I am relatively new wood turner. I’ve made about 20 pens so far. I would LOVE to do this project, and turn a blank for a vet! Very cool idea to say thank you to our veterans all over the country.
Thank you Bradley,
You’re entered.
Regards,
Bob
I think that over the years, that I have watched all of your videos. This is just another fine example of why you are a Master pen maker. Keep up the great work and thanks for sharing!
Thank you Jon,
I appreciate that. I’d rather just be the shop next door where everybody’s hangs out. That would be cool.
Regards,
Bob
what a beautiful piece!
Thank you.
Regards,
Bob
10/10. I tried this with Acrylic cut off's. Came out awesome just like your's. Great video, thank you.
Thank you.
This is a great way to use up all those cut offs and to make some really cool blanks.
Regards,
Bob
Excellent idea Bob, we can’t thank our veterans enough for the sacrifices they’ve made for our freedoms. I want one. Thank you for all the great content, I’ve learned tons watching your videos.
Thank you,
You’re entered.
Regards,
Bob
Just a few questions. Sanding with the metal bushes on, usually, in my experience, ends up with the metal from the bushings bleeding into the grain of the wood. Therefore leaving a darker grey circle at the ends. Applying CA to the blanks with the metal bushings still on would leave it stuck firmly to the bushings.
Just place if a thin coat of C/A as a sanding sealer won’t usually glue the bushings to the lathe. If it does, tap the bushing on the lather bed and it will come lose.
Regards,
Bob
I already have done that last week4 veterans around Shreveport La.Thank for your Channel
Bob
Thank you for what you’re doing, it is appreciated.
Regards,
Bob
Oh I would live one and easy to give to a vet, even if I don't look in the mirror. I am 25 minutes from ft Campbell and still know several people out there. Love your videos and I have learned a lot thanks Bob
Thank you Bert,
You’re entered.
Regards,
Bob
Great pen from Honor Flight cutoffs and a beautiful finish. As a 29 year vet, I want to thank you for doing that. My daughter who does all my shopping these days said she saw you at the Garland Rockler store yesterday but you were teaching a class and she didn't want to bother you.
Hello Paul,
Don’t tell her this but that wasn’t me. I was at work in Indiana all day yesterday. I wish I was at Rockler teaching a class.
Thank you for your service.
Regards,
Bob
Thank you for all you do. I thought she might have a little wrong. Have a good day!
I want one. I have many veteran motorcycle riding friends to whom I will be glad to give the finished pen to.
Thank you,
You’re entered.
Regards,
Bob
A little late but great video. I have a "Turn a Pen for a Veteran" class at Rockler here in San Diego in a week. Looking forward to my first one.
Thank you.
Enjoy your class.
Regards,
Bob
Nice looking pen Bob . The vets are going to appreciate all the effort that went into this . Take care.
Thank you Glen.
Regards,
Bob
Wow...I never thought of doing that. Thank you for the video. I'm going to my garage now and looking for the cut offs :)
Thank you Michael.
It does make for some interesting blanks.
Regards,
Bob
@@RJBWoodTurner Thanks for the reply Bob. Not everyone does that. I just finished my pen using 3 types of wood. It came out great. Thanks again.
@@michaeldequatro1012 That’s awesome! Now you won’t have all those cut offs laying around that you don’t know what to do with.
Regards,
Bob
I really like what you did here with the blanks. Thanks for sharing the tips and for appretiating what we veterans do eery day. GOD bless!
You are very welcome. Thank you for your service.
Regards,
Bob
I want Bob. Thanks, Terry
Thank you Terry,
You’re entered.
Regards,
Bob
That has turned out really good. Being a veteran myself I appreciate what you have done Bob. Thanks.
Thank you for your service Mike.
Regards,
Bob
Great ideas, both the pen blank and gifting a veteran. I would love to have one. I appreciate your enthusiasm for pen turning!
Thank you Timmothy,
You’re entered.
Regards,
Bob
Thank you for the reply👍🏽
😃
I want one. I am a veteran myself. I love to turn pens and will give it to one of my veteran friends. Thanks for doing this.
Thank you William,
You’re entered. Thank you for your service.
Regards,
Bob
Oh bob I’ve missed the boat but if representation of the AUSTRALIAN Vets if of interest I’m happy to🙏 Tom in Melbourne Australia 🇦🇺
Thank you Tom.
Regards,
Bob
Love the blanks and the idea behind them! As the son of a AF veteran I am deeply moved by the idea. I live in eastern NM home of Cannon AFB special operations base. I would love to receive one of your blanks and give it to someone that would be much appreciated by it. Thanks Bob for the great videos.
Thank you Nick,
I’ve already given them away. You can still turn one on your and pass it along to a veteran. I’m challenging everyone to do that.
Regards,
Bob
I WANT one. Have a vet in mind that would love it. Great idea on making and giving these blanks away. Your the man.
Thank you Charlie,
You’re entered.
Regards,
Bob
A great idea Bob, a lovely pen. Had I seen this video earlier I would have snatched your hand off. Anyway, a nice gesture on your part. 👍👍😍👏👏
Thank you Eric.
Regards,
Bob
wow what a deal and of course im WAYYYYYYYYYYYYYYYYYYYYYYYYYYYY too late thanks too ALL the vets
Thank you for checking it out.
Regards,
Bob
Gosh that’s a really gorgeous pen Bob, great challenge. You take care now.
Thank you Val.
Regards,
Bob
I would have loved one, but obviously I’m too late to the game, but, you do have a new follower! Love your idea of handing the outcome to a random vet! Thank you four supporting us vets!
Thank you Bruce,
It was my pleasure. Thank you for your service.
Regards,
Bob
Super idea. Have been saving pieces also for the same purpose. I like how you put them together with the CA and the tube. Probably will do the same with a 7mm slimline pen
Thank you David.
Regards,
Bob
I want one! Bob, this is a great idea for those of us who were not able to join in, but still wanted to find a way to contribute.
Thank you Doug,
You’re entered.
Regards,
Bob
Love making pens like this. I also use my Slimline pen kits that have left over pieces. Gold nib, copper collar, chrome clip, etc. My wife calls them Leftovers. lol Really good for when you want to turn for fun/practice and don't have any full blanks.
I agree, cobbling something together from parts and pieces it a blast.
Regards,
Bob
I want one. That is a great idea. I was just looking at my scraps and thinking of doing this same thing.
Thank you April,
You’re entered.
Regards,
Bob
I want one and will certainly find a veteran to give it to. Thanks for this and all of the videos they are appreciated and enjoyed!
Thank you Stuart,
You’re entered.
Regards,
Bob
I want one! ANZAC day is just around the corner here in Australia and id be honored to turn and hand over one of your blanks
Thank you,
You’re entered.
Regards,
Bob
What a great idea!!!! Great video!
Thanks!!!!
Thank you Harvey.
Regards,
Bob
Good morning Bob ! Just finished viewing your video on cut offs ! For some time now in have been saving bunch of cut offs and will try and make a pen using your video to guide me ! Thanks for the tip enjoy looking at you videos ! Have a good week ! Vic from Val-Comeau Newbrunswick Canada 👍
Thank you Victor.
Regards,
Bob
I want one. Fantastic idea.
Thank you Bobby,
You’re entered.
Regards,
Bob
I want one. Oh, to late. Pitty. Great way to show the respects to the veterans. Greetings from the netherlands.
Thank you Willem.
Regards,
Bob
Thanks for all the inspiration 😀
Those are beautiful Bob, next time you make them I would be willing to purchase a few
Thank you Andrew.
Regards,
Bob
I did some acrylic mixed pieces and the pen came out beautiful.
That sounds cool Jonathan.
Regards,
Bob
Hey Bob. Wish I had seen this back when you made those blanks. I know several Vets that would have loved a pen. Still a cool looking pen and an idea for me to turn. Still getting my shop setup and doing my chemo treatments but I have some ides for some pens. Take care my friend.
Thank you Joel,
You take care too buddy.
Regards,
Bob
I want one. I love that you are suporting troops like this.
Thank you David,
You’re entered.
Regards,
Bob
Man that’s awesome I would love to have one but waiting for my lathe but I rather someone who is not a veteran, do it, I’m a vet also I was in our volunteer fire department for 24 years and 17 years as a Police Officer but my lathe will soon been in my little shop and can’t wait to start turning. Thank you and all the people helped you for honoring our veterans god bless you.
Thank you for your service as a military veteran, police veteran and veteran fire fighter.
Regards,
Bob
I want one! I'd love the chance to give a vet a pen and am doing a gun show in a couple weeks. Lots of Vets to do this with. Thanks Bob and congrats in advance to the winners.
Thank you Howard,
I’ve already given them away. You can still turn one on your and pass it along to a veteran. I’m challenging everyone to do that.
Regards,
Bob
I want one Bob. I know several veterans who would appreciate this.
Thank you Doug,
You’re entered.
Regards,
Bob
I want one Bob. I've got the perfect person in mind, he's served 3 tours in Afghanistan and Iraq and we are now friends and work colleagues for the Western Australia Fire Service.
All the best mate from Down under.
Keep up the awesome channel.
Where abouts are you in WA?? Im also in WA
Perth, northern suburbs 👍
I want one! I have a number of veteran who would be deserving. Thanks!
Brendan Atkinson me too
Thank you Rod,
You’re entered. I found your other request and popped you in off that one.
Regards,
Bob
I want one for a UK veteran. I think what you did for them was amazing!
Love your videos Bob I have learned so much from them.
Ian
Thank you Ian
You’re entered. I think it’s awesome to have the UK represented here too.
Regards,
Bob
Stunning pen bob. The orange wood is beautiful.
Thank you very much.
Regards,
Bob
Great way ti use up the offcuts, Very attractive Pen,
Thank you John.
Regards,
Bob
Hey Bob, I accidentally responded around 12:30 AM EDT to Brenden Atkinson’s post instead of directly to you. I’d love to turn on of those blanks and give to a deserving veteran. Thanks!
You’re in Rod. Yours was the last accepted entry.
Regards,
Bob
Great job on the leftovers Bob. What a great looking pen! Would be honored to get one of those blanks to make for a veteran!
Thank you Terry,
You’re entered.
Regards,
Bob
I'm a veteran..I want one.. Will definitely share with a fellow vet! I'll get a picture of him receiving it!
Thank you Kenneth,
You’re entered.
Regards,
Bob
Brilliant idea for support for vets Bob👍👍👍👍👍👍👍👍
Thank you Alan.
Regards,
Bob
Very cool video and the pen looks awesome. I think it’s awesome what your doing for the Veterans.
Thank you Thom.
Regards,
Bob
I want one, I would be honored to accept your challenge. I think this is the coolest challenge I've seen up on RUclips.
I'm thinking one of the Thank You Sierra style pens from Exotic Blanks will be a good match.
Thank you.
You’re entered.
Regards,
Bob
It should mate perfectly to the 27/64” Blank.
Regards,
Bob
I want one Bob, like I said that would be fun with the guys at the VA.!!!
Thank you Ken,
You’re entered.
Regards,
Bob
Hi Bob. Once again, love your videos. I just got my pen mandrel, so will be doing lots of turning of pens. I would love one of your blanks for a Vet. Thank you.
Thank you Deanna,
You’re entered.
Regards,
Bob
I want one, please. What a great idea.
Thank you,
You’re entered.
Regards,
Bob
Hey Bob,
Shoot man, I missed the give away by a million hour jaja. I've been carving wood signs for two years now and got interested in pen turning to the point that in less than 24 hours of planning, I bought everything I needed to start turning. It's been a week since I started turning pens and I'm getting the hang of it.
Thanks for the videos.
Ohh and I'll be on the lookout for the next give away, my boss is veteran.
Thanks
Thank you, I think it’s awesome you jumped right in and started turning.
Regards,
Bob
Great idea for using the cutoffs. I want one!
Thank you Jeff,
You’re entered.
Regards,
Bob
That's an awesome pen and idea, Bob! It looks like you have plenty of volunteers, but if I get lucky enough to turn one, I'd gladly give it to a vet!
Thank you Robert,
You’re entered.
Regards,
Bob
That's exactly how I started with 'segmented' pens. Didn't want to waste all the offcuts. Now I deliberately cut short pieces of wood/acrylic for pens
On that note: How successful have you been inter-mixing acrylic and wood segments into a blank as Bob just demonstrated. Epoxy or CA? I have a lot of cutoffs.
Regards,
Dwight
I've only done a few mixed blanks and I've used to CA, although I would think that epoxy would work ok. After a while, I started cutting the off-cuts at an angle, that makes some interesting features when turned. Have a look on my Facebook page under"Ged's pens 'n things"
Thanks.
Thank you Gerald.
Regards,
Bob
Thanks Bob
Thank you.
Another great project
I am a disabled Veteran.
I have already made several batches of pens for the program so you don't need to put me in the drawing.
It might be nice to let folks know how to get hooked up with the foundation.
Christian Jensen Woodturning - My Way
Thank you Christian.
Thank you for your service.
Regards,
Bob
Excellent work Bob, beautiful colours , good idea!
Thank you Kwstas.
Regards,
Bob
What a awesome idea. Good on you sir!
Thank you.
Regards,
Bob
I would like one Sir. Have 2 Vets in mind. They are both getting a pen. One of my blanks and hopefully one of yours.
Thank you Mark,
You’re entered. I think it’s great that you’re making one yourself. Thank you for that.
Regards,
Bob
That’s a very nice looking pen Bob.
Thank you.
Regards,
Bob
I want one Bob. Awesome way of saying thanks. I'm down for giving it to a random veteran.
Thank you Randy,
You’re entered.
Regards,
Bob
I want one! I am a veteran myself that loves turning pens. I would easily give this to a vet and some I create myself to vets!
Thank you David,
You’re entered. Thank you for your service.
Regards,
Bob
Thanks
Just wandering about it seams like a great ideal for the lath
Also fantastic ideal for the vets
Thank you Kenny.
Regards,
Bob
Great pen and a awesome idea on the cut offs. Have a great week Bob.
Thank you Robert.
Regards,
Bob
I want one! Currently Active Duty and around a ton of veterans!
Thank you Chris,
You’re entered. Thank you for your service.
Regards,
Bob
Very nice,, thanks for sharing
Thank you Mitchell.
Regards,
Bob
Bob I would love to turn one. We are having some guys from Alaska come to Manitoba check out our artillery guns and I'd love to present 1 to one of these guys or gals. Our military's work so closely together it's always great getting to talk with fellow soldiers on the same equipment!
Thank you,
You’re entered.
Regards,
Bob
Great idea, and a very nice pen.
Thank you Dennis.
Regards,
Bob
Very cool giveaway. Thank you for supporting our veterans!
Thank you.
Regards,
Bob
I want one please. I think that looks great you done a great job. I think what your club did was fantastic. Thanks for the video.
Thank you Donald,
You’re entered.
Regards,
Bob
Beautiful
Thank you Joe.
Regards,
Bob
I want one. I know a veteran who would appreciate a gift like this.
Thank you,
You’re entered.
Regards,
Bob
I want one Bob. What a great idea. Thanks
Thank you David,
You’re entered.
Regards,
Bob
I love the look of that bob I’m definitely going to give it a try myself.
Thank you Dave.
Regards,
Bob
I want one Bob ! I have an event in June for Vets giving a random vet a ride in a parade at the Vietnam Wall Tour, would love to hand that random vet that rides in my car a pen also.
Thank you,
You’re entered.
Regards,
Bob
I want one! This is an awesome idea I very much want to be a part of it
And I live in Fort Wayne so shipping might be cheaper :D
Thank you
You’re entered.
Regards,
Bob
I want one!! That’s a wonderful idea! I’m up for it. Thank for the videos
Thank you Joseph,
You’re entered.
Regards,
Bob
I love seeing you build a blast/pen from scraps.
Thank you,
It’s a great way to use up all those cut offs.
Regards,
Bob
I am just getting into turning. Done a few bowls and haven't tried, but the pens seem a great enduring gift. Thanks for your video... subscribed. I know... I am a little late to your giveaway but great idea! Go Vets!
Thank you, this was a fun video and hopefully we made a few vets happy. I agree with you, Go Vets!
Regards,
Bob
Don't know if you realize this but if you put the purpleheart in the sun for a day or two itll turn back to the purple color instead of brown gotta do it after sanding before any finish is applied to it
Thank you.
You can use tack cloth to clean the sawdust off your pen blank before you apply your finish.
Thank you CJ.
Regards,
Bob
Hi Bob. I want one. I also have a VET in mind that would love to have a pen made using one of the your blanks. Great video by the way.
Thank you George,
You’re entered.
Regards,
Bob
Enjoyed this video. I am interested in acquiring a squaring tool to use on my sander. Please advise, thank you and keep up the great work!!
Thank you,
Here’s the link:
Sanding Jig -Pay close attention there is a large and a small jig depending on your sander.
www.turnerswarehouse.com/?ref=8zgq7wolkt-
(Search for Sanding Jig)