How to install a interior door handle on your Charger Pursuit.

Поделиться
HTML-код
  • Опубликовано: 12 сен 2024

Комментарии • 54

  • @Grifballplayer
    @Grifballplayer Год назад +5

    the "I don't have money" earned my subscribe, most real comment out here

  • @shroudturin7799
    @shroudturin7799 2 года назад +3

    You saved me some $$$$$$$, took me an 1hr/per door, that clip took me some time to get off without breaking, KEEP THE VIDEOs COMING, THANK YOU THANK YOU THANK YOU BRO

    • @sumcrazydude
      @sumcrazydude  2 года назад

      Thank you for the great support 🙏 🙌 😀

  • @BruceWilhelm-bh1tb
    @BruceWilhelm-bh1tb 3 месяца назад

    First let me say I really appreciate the video. Great info presented very clearly. Saved me a lot of frustration. One thing I saw....at 7:30 in the video, don't take that bracket apart, there is a much easier way. Just need to loosen two screws and you can take out the whole assembly in one piece. At 8:14, to the right of his wrist watch,you can see the weather strip on the end of the door. Partially hidden behind is a 1 inch grommet. Take that out and behind it is a torx head screw. Turn it counter clockwise to slide a bracket that retains the outer door handle. Once it moves far enough, the outer door handle is going to come out. Behind that is a Phillips screw. Loosen that enough to allow the whole inner assembly to be released.

  • @hazewright1486
    @hazewright1486 2 года назад +3

    Thanks for the helpful video! Just did this to my 14 pursuit, and your video set me in the right direction. Those three retention clips holding the latch to the panel were a bastard! Enjoying your other videos as well, can't wait to do more mods to my hemi pursuit!

    • @sumcrazydude
      @sumcrazydude  2 года назад

      Thank you for the great support 🙏 🙌 😀

    • @joe71682
      @joe71682 Год назад

      Well they're a bastard cause it's the wrong way to remove the latch, I did it this afternoon and you unclip the latch from the bracket and leave the three retention pins attached to the exterior handle.

    • @wjye
      @wjye 6 месяцев назад

      Thanks man!! Really appreciate this video. Now I know what I need to pull from the yard or how to do the job. Appreciate it!!

  • @darrininverarity4297
    @darrininverarity4297 2 года назад +2

    Thanks,I picked up a pursuit and I have to do this to pass the safety check inspection before I can put it on the road.

  • @kingtrilloriginal6967
    @kingtrilloriginal6967 2 года назад +5

    I just bout a 13 and didn't realize that it doesn't have the back door handles 🤦🏾‍♂️

  • @crj_driver8676
    @crj_driver8676 3 года назад +2

    Great video, I watched and followed to a T and worked out awesome. Thanks for posting it!

  • @trevorgriffin2392
    @trevorgriffin2392 2 года назад +1

    You still the 🐐💯!! I'm about to add my door handles soon as my new hellcat door panels get here.

  • @tonyaharris8710
    @tonyaharris8710 2 года назад +1

    Thanks.. it took me a year to find someone that answered my question

  • @ROLYTC
    @ROLYTC 3 года назад +2

    Thanks Bro great video, I'm I. The process of doing this to my 2014 pursuit 🤙💪

  • @gmanwilliams1859
    @gmanwilliams1859 3 года назад +1

    Thanks , great video . It definitely helped with my installation . Very informative 👍🏼💯🤘🦾

    • @sumcrazydude
      @sumcrazydude  3 года назад +1

      I am glad ☺ thanks for the support

  • @e.z.hernandez6378
    @e.z.hernandez6378 2 года назад +1

    Fantastic video my friend.

  • @shellzbk3297
    @shellzbk3297 Год назад +1

    I dont have a pursuit but this will help me replace my door handle bracket

    • @sumcrazydude
      @sumcrazydude  Год назад +1

      Thanks for watching

    • @shellzbk3297
      @shellzbk3297 Год назад

      ​@Sum Crazy Guy I finally fixed my Chargers door handle bracket and handle replacement today because of your video! Thanks again for the step by step.

  • @ovaisemurtuza2159
    @ovaisemurtuza2159 3 года назад +1

    Thank you. Very good video with all steps. Plan to do this to my 2014 pursuit. BTW did you have problems with the horn and high beam not working?

    • @sumcrazydude
      @sumcrazydude  3 года назад +1

      Thanks and No, when they reverted the car back to stock they fixed all that.

  • @BabyTur
    @BabyTur Месяц назад

    thanks bro 🤙

  • @mohamadhamoudeh6592
    @mohamadhamoudeh6592 9 месяцев назад

    Hey! I know this is a very late comment but I just want to make sure of something. I’m about to order the door latches and I wanted to make sure are the right and left side door handle latches the same? Want to make sure before I pull the trigger on 2

  • @JonnyBlazeTCB
    @JonnyBlazeTCB 7 месяцев назад +1

    I'm doing this to mine this weekend. Why does the window need to be disconnected from regulator?

    • @sumcrazydude
      @sumcrazydude  7 месяцев назад

      It's foe easy access, I did not see a way to do it with the windows in the way.

  • @alexcorona7479
    @alexcorona7479 Год назад +1

    I have a pursuit too did you have add or replace the center console?

  • @KevinW8BRY
    @KevinW8BRY 3 года назад +1

    Thanks for the video. I have been contemplating doing this to my pursuit.

  • @slaawf
    @slaawf 10 месяцев назад +1

    good video

  • @xxxtra_guacamole
    @xxxtra_guacamole 8 месяцев назад

    How about electrical? Like windows? How do I let the rear passenger have window control?

  • @JavierRodriguez-fw9mi
    @JavierRodriguez-fw9mi Месяц назад

    Hi,I followed the same steps as you did. The door works completely fine until the car locks, once you unlock the car the door wont open neither from the inside or the outside. Please help meee

    • @sumcrazydude
      @sumcrazydude  10 дней назад

      I'll have to be there to see it working, sorry bud

  • @punjabitube2228
    @punjabitube2228 7 месяцев назад +1

    What is the part number for that cable

    • @sumcrazydude
      @sumcrazydude  7 месяцев назад

      Sorry, I got everything from a salvage yard

  • @rickeetaylor1721
    @rickeetaylor1721 2 года назад +1

    Thank u

  • @ManuelaMelton
    @ManuelaMelton 2 года назад +1

    Where did you get the handle? Did you order a kit?

    • @sumcrazydude
      @sumcrazydude  2 года назад +1

      Nope, got it all from a junk yard

  • @richardbeery7845
    @richardbeery7845 2 года назад +1

    When I try to pull the inner consuls out and attach the plastic piece at about a 45° angle down it broke.

    • @sumcrazydude
      @sumcrazydude  2 года назад

      Please DM me to my Instagram. I have no clue what are you talking about. But I'll like to help

    • @cholote313
      @cholote313 Год назад

      It was funny but I felt it😩