Most common problem if your brake lights wont turn off on your car , truck , or suv!
HTML-код
- Опубликовано: 18 авг 2022
- Howdy folks,
The other day, I walked out to my sequoia to find the battery totally dead. Once I jumped it, I noticed the brake lights were not turning off with the key out of the ignition. I noticed those green bits under the steering wheel and sure enough, it just needed that little plastic clip and VUALA! FIXED! Just thought I would share this with you fellow 1ste gen Toyota Sequoia owners! Below you will find the little plastic piece that will work on all 2001-2007 Sequoias and it comes in a pack of 10 so youre good if the replacement ever fails! Cheers all!
Brake pedal bump stop: amzn.to/3c5TOWr
I actually searched for where I can find my break light fuse, to turn off the light, instead I found this. This is the real, unerline issue I had. Thank you bro!
I also searched for fuse to shut off my brake lights and found this video and sure enough I found the broken plastic grommet. Thank you for posting this great trouble shooting video.
Thank you that was exactly the problem😊 the part is called "brake pedal stop pad"
Thank you
Thank you!
Cracked me up when I looked at the floorboard and see the broken pieces of green plastic. Thank you so much.
So many weird little quirks with these trucks, I had never heard of this one.
The Sequoia community is the best thanks for sharing!
my dad came home today with the same problem. went on youtube and stumbled upon your video. saw pieces of broken plastic on the carpet under the brake. we put something in between for the meantime to turn the light off till we get that button type thing. thank you so much for this video
Saw the broken pieces on my floorboard this morning and thought it was broken candy , wow very helpful headed out to purchase the piece!
Thank you!!! You are one of the few who actually showed both where the part goes AND how it gets installed. It might seem super obvious to most people, but I fix a lot of different stuff on my 2000 Corolla and it still wasn’t entirely clear what I needed to do to get the bumper in the right spot. I appreciate this video so much!
Very helpful. I would have never thought to look there. I didn’t even notice there were pieces on the floor of my car until after watching your video. Thank You.
Sheeesh, thank you for the info. My rear lights were stuck on today and I looked down on the car mat and there was my issue. The piece broke off, easy fix. I’m glad we got RUclipsrs like you. 🙏
This was so helpful! Brake lights on, looked for green parts--they were THERE! 2004 Tundra, 220k miles. Actually called local dealer, picked up part for $5 and my husband got it installed with a little help from me and your video. Thank you!
Very helpful, thanks so much. Found the broken gromet, found a replacement @ a local auto parts store, and after 10 min of angling under the steering wheel, I was able to push in the gromet! This saves me so much time and worrying about my battery before I could get to a mechanic. 🎉🎉🎉
Omg! Thank you so much! I checked and that broken piece was all on the mat. Mechanics are close so I just put a part of the piece in position so the battery's car doesnt die. Thank you. Pura vida 🇨🇷
The same happened to me and I did the same😂
2001' Toyota Sequoia: Thanks for a very clear and short video of the problem with solution. I bought the piece from O'rileys for &10 and installed it in 10 minutes.
Thank you!!! you hit it right on the target. i was wondering where the green pieces came from and you explained it!
This was so helpful. I fixed the problem. Here is another tip for those with the same problem - get a 'flip flop' and cut of the stopper from the underside. This stopper is exactly the right size. Strangely enough, I had cut one off only yesterday, so I took it to the car and it fit. So if you don't have the part, use that bit from the flip flop until you can get to a garage. 😘
HI, you video is short but very informative in how to put that little piece, appreciated for your video
Thanks for the accurate and to the point description of the problem. Yesterday my brake lights on my 02 Sequoia would not turn off. So I spent a little time on the Internet trying to find the issue. And I only spent a little time because of your video. After watching it I walked back out to my car and there were the little green pieces on the floor mat.
Problem solved.
Thanks again for your time.
Awesome! I'm glad this video helped you out! If you havent yet, subscribe to our channel for more 1st gen sequoia content! Cheers
@@wasatchmotoco
I have subscribed and thanks again.
Just watched your video, as my 2004 Tundra brake light were staying on. After watching your video, went back to the truck and found those little green plastic pieces on the floor board. Now that I know how to fix, it will be easy peasy.
Yes, yes, yes-green pieces on my Tundra floor mat.....great video, short, to the point, and of course, accurate dx of the problem..thank you🛻
Thank you. Just went to my truck to check it out, and I immediately saw the green plastic pieces on the floor mat.
5⭐️ video! Excellent information. Went to local auto parts store and installed in less than 2 minutes.
Thank you you saved me a bunch of time with this info!!
Thank you for this video! I am not at all a car person but i followed your video and it worked! 🙌🏻
Thank you for this post. We used a Mexican quarter for a temporary fix until we get replacement in, but exactly what you said the green pieces where on the floor
Thanks for the help. We had the same issue, placed a small bolt, washer and nut. It solved the issue without purchasing a new spare part.
Thank you sir you are a huge help. My battery died overnight because of this exact issue and I was wondering what that green stuff on the floor was!
You are right! I was wondering what those little green plastics were. 😂
Thank you simple fix it also fixed my cruise control
Exactly what the problem was. Thank you!!!
Ford Ranger 2006. Thank you for your information 🙏
Amazing , thankyou for helping fix the problem 🎉
Why evry body is not like you simple helpfull . You are legend . Please more
Thank you so much - this was my problem as well!!!
Thanks for your assist! And I appreciated that you dropped the damn thing before you got it installed because, with my husband depressing the brake and me trying to push the button out of the way? The struggle was real. #truthinadvertising A few words might have been said before I finally got it seated under the switch so that it mounted. Whew! Car yoga accomplished!
That was exactly what was wrong! Thanks a bunch.
I did replace with the rubber piece, but after about 2 years it wore down and the brake light kept coming on again. Then I replaced with the hard plastic piece ( similar to original) I think Auto Zone sells the kit with both rubber and hard plastic.. - may have to shave the hard plastic a bit like me to make it fit. That was 4 months ago, still working. I did this with the engine off and it was very difficult to do. So turn the car on as this video tells.
Thanks for the show
Thannkkkk youuuu.. it worked. Not sure why it also may have corrected an acceleration problem.
I should have watched this video before taking it to the shop!
Thank you so much this was also the problem with my car but instead of the rubber falling off , the little switch has dug a hole thru the rubber making it not press down!
❤ Thanks a lot, it happened to me just like in the video and it was a simple fix also
awesome nailed it thats so weird to find bang on what ya want thankyou!
You're amazing.
Thank you
You saved us
God bless you
Exactly what you said is exactly what i had.
Thank you. This is exactly the problem I have. The rubber plate is black on my car 2000 Corolla.
Thanks, this is good stuff
I had black crumbles on the floor! Fixed the issue for the night with a penny.
Thanks you vid was a big help
Thank you for your help
Thank you brother.
my brother in law turned me on to the little clear stick things you put on cabinet doors so they don’t slam! same thickness as the broken plastic thingy.. clean the metal bracket and stick it on.. perfect!
If it doesn’t stay for ever.. keep the rest in the glove box!
Much love 🎉
Saved me a heart attack... great vid
Thanks what a legend
Wow! Thank you
Thank you so much
Thanks Bro!!
Thanks you and yes my issue ... easy fix except im in the philippines so had to make the part myself ... easy job though
Thanks. I fix my car after two days unplugging the battery every time i use it
My Toyota t100 had the same issue and I been driving around trying to get a bump to get my lights working and I decided to go to RUclips and first video
I came across and I went and saw my mat with some small tab that broke
Thank you
Thank you so very much for this video. I was starting to freak out, and God led me to your video. Sure enough, I see the green bits on the floor. Thank you, and God bless you🙏🏽
Life saver
Wow, this helped my 2004 Tundra. I am using electrical tape sticky side out until I can get the part ordered.
I saw the green plastic on the floor of my truck and laughed so hard
Bravo !!
Bro. You made my day. I wish I could venmo you some $$ and buy you lunch. Thank you!
Same thing happen to me I found my piece was broken , so I ordered some more spare grommets and popped it in and bam now my lights are off 😎
Thanks .
Who knew? Awesome
I have a 2003 Sequoia and this had me very worried. I went out and found the green parts all on the mat! Thank you! Kept jumping the car. I wish you could tell us the name of the part?
Check the description he put a link to the piece but I would say is a bit late now lol
Clutch Brake Pedal Stopper Switch Buffer Cushion Pad
Would this sensor not allow the car to pick up speed?
What is the part called? I just had this issue with my Toyota Tercel. I put a penny in place for the night so the lights went off. Now I’d like to order that part off Amazon but I don’t know what it’s called.
Back lights will not shut off after replacing Brake cushion Stopper for 2002 Toyota Sienna. Does something need to be reset?
My go to 😂unplug the battery then hook it back up
What's the correct name for that little part? I'm trying to buy one.
you have the amazon link sir..please
Nice video. That's my problem. Where is the link for the replacement part? Found it, decent price and installation was easy.
Worked like a charm 🤗
I’ve yet to go out cause it’s raining. But my 2014 Kia Sorento has brakes staying on. I herd it could be brake switch. OR the brake light I replaced about 3 weeks ago the inside of those burn out badly and short out having brake lights come on and stay. Also having the traction control car show up on the dash. On the way home from work it wasn’t on. BUT early morning going to work it is. So, tells me it’s NOT brake switch.
What if after you replace the plastic piece, the problem continues ?
Man i’ve had a problem with my Nissan 350z, I replaced the switch and the rubber thingy, and it still happens, but the thing is that it just happens when i turn the lights on, if im driving at night and im lights off, my break works fine, if i turn my headlights or inside dashboard lights, the break light will stay on always!
But what is that little piece called?
Brake pedal stop Pad
@@lilneki6910thank you
What is it called so I can order it ? 😊
Just happened to me!
Did this now my breaks locking up. Help?
It's the blinker fluid that's losing it's viscosity
😂😂😂
I couldn't figure it out. I watched the video and looked on my floorboard and seen 2 black plastic broken pieces laying under the brake pedal.
what is the name of the piece so I can find the part on Amazon?
Tail light retainer i believe
Nvm i believe its a Brake Clutch Pedal Stop Pads
What’s the piece called
i'd also would love to know, to get one from the local shop.
I will also like to know what the part is called
I suggest not to buy the plastic replacement will break again overtime. I put a screw long and tick enough to get in there and will be permanently.
Bro, next time name the part. I can get it off of Amazon??? What is it called???😂
Thankyou. Help me on my Subie.