How to Calculate Lift and Drag in ANSYS Fluent Tutorial I Flow Analysis | Fluent with Fluent Meshing

Buy PC parts and build a same PC like me that can handle upto 6 million mesh count using Amazon affiliate links below -
DDR5 CPU - amzn.to/47Hgqn6
Motherboard - amzn.to/47hcsBS
DDR5 RAM - amzn.to/3SObJ6R
Gen 4 SSD - amzn.to/49KgYL2
GTX 1650 GPU - amzn.to/47HM4Rl
Cabinet - amzn.to/47J7TAh
PSU - amzn.to/3MPuMK5
Mouse and Keyboard - amzn.to/47Ewjuz
In this tutorial, we will learn how to set up a simple CFD simulation case for flow over a car. In this tutorial, the procedure of geometry preparation, meshing with fluent meshing, setting up boundary conditions, calculation of lift and drag and viewing the results in fluent is demonstrated.
Kindly drop a mail at [e-mail] for queries or support.
• How to do Analysis of ...

[@calvinwong8115]

Really helpful in helping me set up aerodynamic simulation for my assignment, thank you very much!

[@yusufaziz5348]

mantap bro

[@wym1753]

@@yusufaziz5348 noted with thanks

[@manuelffonseca]

Thanks for share

[@sametozer3632]

you are amazing cfd baba

[@cfdbabaopenfoamansyscfd2972]

Haha. You are being too kind :)

[@laxminarasimhachowdaryparu2640]

Thank you very much sir🏎️💨

[@cfdbabaopenfoamansyscfd2972]

My pleasure!

[@laxminarasimhachowdaryparu2640]

@@cfdbabaopenfoamansyscfd2972 is there any difference in results if we do CFD with tyres and without tyres

[@huzaifaahmad6388]

I can't set 0 at one side of enclosure why?

[@Full_Fun_ASMR]

can you please share cad model

[@DanhPham-or7pi]

Sir what's brand name of model ?

[@laxminarasimhachowdaryparu2640]

Any difference in end results if CFD is done with tyres and without tyres.. and any particular reason for doing this with half body sir...?

[@cfdbabaopenfoamansyscfd2972]

Yes results will change and drag may increase if tyres are considered. I have considered half body since our geometry is symmetric and it also reduces the total mesh count.

[@laxminarasimhachowdaryparu2640]

@@cfdbabaopenfoamansyscfd2972 ok sir thank you ♥️

[@Tasijoe]

Great tutorial, where did you get the cad from?

[@86-yashgodse70]

Dear sir, I have developed a shape of body using nx but now it's hollow and for analysis I need it filled like solid for analysis I build the body it's said in design tree as subdivision body pls tell the step to fill whole body from inside.
In short I have designed the outer shell of car but infact it's hollow from inside so now while using ansys it shows surface instead solid
Even in above video of yours sir you draw shape using nx shape and adjusting cages but you convert in solid iwant to know how you conver subdivided body into solid body pls.

[@cfdbabaopenfoamansyscfd2972]

Hello. Sorry but I don't have much experience with NX. Also I got this CAD directly from internet. I did not create it.

[@laxminarasimhachowdaryparu2640]

Sir can you share the model

[@cfdbabaopenfoamansyscfd2972]

Kindly mail me on [e-mail]

[@NarendraKumar-ur4jh]

Dear sir, is it possible to share the geometry

[@cfdbabaopenfoamansyscfd2972]

Hi please mail me on [e-mail] for CAD model.

[@SulekhaMeher-hj2uk]

can you share cad model?

[@cfdbabaopenfoamansyscfd2972]

Hello. Yes. Kindly mail on [e-mail].

[@nichiyoubiarkaanirwana]

can I get the geometry?

[@cfdbabaopenfoamansyscfd2972]

Hi please mail me on [e-mail] for CAD model.