Hey I noticed you are using the ch-31 truss! Could you tell me what is the diameter of the truss tubing so I know which o-clamps to buy before I order one of these?
I can't say thanks enough for breaking it down like this. I've been clicking on videos for days and going nowhere fast - I think this is the perfect explanation, at least for me! Great job, I'm subscribing!
I had this controller for almost 3 years and because of your video, I was able to program it with 3 head lights and a laser and it is amazing to do it automatically. because I had used it manually I can program it faster. thank you for making it simple.
I like that you showed us on the DMX controller what the sliders and buttons do and what they correspond to in programming. This really helps me understand how to program. Now I need to connect some lights to my DMX controller and see it for myself. Thank you for your explanation.
thanks for breaking it down like that. This was very helpful. Started from zero knowledge of dmx and have been slowly getting a grasp, but still way more questions than answers. The way you explained and diagramed everything makes it so much easier to understand. thanks again.
As many others have already said “Thank You!” for making such a great tutorial! I have this exact board and this is now my go to refreshing my understanding of this controller. Only use it on Halloween so I don’t remember it as well as I would like. You have saved my bacon so to speak for another year. 😅 Thanks and wish you the best.
Thank you very much. You have just cleared the fog hanging over the whole issue of DMX 512 information. The mfg/suppier's approach is that you already know how the system (s) work. The white board is a great way to "lay it all out" for us older (I'm 70 yr) newbies doing community theater. (Orion Orcan fixtures/Rockforce 384 controller)
Mate thank you so much! Very very helpful! I now just need a controller I'm looking at avolite pearl 2000 or zero 88 frog 🐸 ( kinda throwing myself in at the deep end here!). Can't believe I've waited so long to learn about dmx! It helps that you have gone back to the very very basics and taken the time to show us! Thank you from the very bottom of my heart!
I really love this video. I was ready to give up on that thing, but you give me hope and I think I will get it one day. I have a small stage, please give me an advice. Do you think 2 Inno Pocket Scan, 2 Pocket Roll, 2 Pocket Spot, 1 Chauvet DJ Rotosphere Q3 Effect Light and 1 Black lightADJ ECO UV Bar DMX Effect light would be good and what kind of DMX Controller you think I should get? Well, by the way, I like yours, it seems simple. Thank's again for the video. Very helpful
Hey man. With that variety of lights and no par cans or floods, I'd say you definitely want to use a controller that runs scenes and chases more so that you moving channels or dimmers. I would get a controller with 8 channel sliders and set your pocket spot and rotosphere to run in 9 channel mode. The pocket scan and roll will only run in 6 channel mode. Honestly not being biased but I would recommend you get a controller just like mine for your application. Here's a link - www.pssl.com/American-DJ-DMXOPERATOR-Automated-Light-Controller
I'm starting to get the hang of how to use my DMX controller; however, is there any way to make the lights "wave" around with this controller? I have this same controller and was wondering if this was the way to go in order to make the lights "wave."
Good afternoon. I am a husband who is running a light board for a community theater. I am not a lighting designer! The theater just installed new ADJ lights: Specifically four ADJ PAR Z120 RGBW units. The setup on the board is as follows: - Light 1 -> Assigned to Fixture 1 (channel 8, address 1) -> Faders 1-4 on the operator board are RGBW. - Light 2 -> Assigned to Figure 2 (channel 8, address 17) -> Faders 1-4 on the operator board are RGBW - Light 3 -> Assigned to Figure 3 (channel 8, address 33) -> Faders 1-4 on the operator board are RGBW - Light 4 -> Assigned to Figure 4 (channel 8, address 49) -> Faders 1-4 on the operator board are RGBW You can see the problem with this setup. While I have individual lighting control as individual fixtures, I cannot have Red on light 1/figure 1 and Green on light 2/figure 2 as sliders 1-4 on channel selection A on the DMX operator board have the same assignments. I would like to setup the DMX board to have the following setup: - Light 1 -> Assigned to Fixture 1 (channel 8, address 1) -> Faders 1-4 on the DMX Operator Board (Page Select A) on the operator board are RGBW. - Light 2 -> Assigned to Figure 2 (channel 8, address 17) -> Faders 5-8 on the DMX Operator Board (Page Select A) on the operator board are RGBW - Light 3 -> Assigned to Figure 3 (channel 8, address 33) -> Faders 1-4 on the DMX Operator Board (Page Select B) on the operator board are RGBW - Light 4 -> Assigned to Figure 4 (channel 8, address 49) -> Faders 5-8 on the DMX Operator Board (Page Select B)on the operator board are RGBW This way I can have individual colors on all four lights at different times. I just have 0 understanding of how to program the lights to be assigned to different faders/page selects on the DMX Operator.
Very informative THANKS. Still a bit insecure how to save Scenes…. I got the impression that You could save all channels ( like a screenshot) in scene 1. But then I understood you fx have to save the values of one fixture at a time in scene 1 ?
It is a screenshot. Select the fixture, move the channels to do what you want, then deselect the fixture. While in Program mode the fixture will stay on whatever you had it do. Then repeat with the other lights. When all of them are how you want it save the scene.
Very clearly explained! Cudos mate! Though I it wasnt 100% clear to me how you actually insert each scene into a sequential order when creating a chase seq. I imagine you press prog-chase to be in program chase mode, then click on each scene button of a particular bank - and it automatically inserts that scene in the order you press scenes. Please correct me if thats not correct.Also, whilst selecting each scene, how do I control the brightness level of each scene (ie sc1 bnk1) as I program scene into a chase. Cheers
Your adding scenes to a chase so the order you add scenes is the order they go in. In program mode, you click the chase you want to add scenes, then go to the scene using scene and bank buttons, and click the button to add the scene. Forgot the button name but it's in the manual. Scene brightness is set by the fixture, not the scene itself
@@DJGhez gotcha. Thanks. So to be clear, i select/hold the add button (like I would creating the scene in first place) and click scene button. And with brightness of scene that should be set when creating the scene and not controlled when adding Scene to chase, or whilst playing chase seq?
Hi thank you so much for this information. I have been trying for days to get just basic information on programming our elation stage setter 24 dmx controller. The man that programmed it originally did not do it correctly and we would like to fix that. Basically we have 8 par can lights and 4 wash bar lights. Currently he has the fader programmed where 1 is red on lights 1 & 2 and fader 2 i is green on lights 1 & 2 fader 3 is blue and then fader 4 is red for lights 3&4 and so on. I know this isnt the way its intended but i cannont find any information to program it correctly. Is it possible that we can assign each light a fixture number and then each fader adjust a channel of the light, for instance light has 7 channels. Can each fader adjust a channel and you choose each light by choosing the fixture. Thank you for any information you can share.
When you deselect the light, it will go back to whatever state it would be in on the current scene. In order to have it not change, you need to be be in program mode.
How do you turn this controller on. Idk if I have a faulty controller , but I have yet to find a video that actually starts out with the most basic thing about this controller; turning it on. Not even in the instruction manual can I find the answer to this question ..... going to keep on trying things for now...
Oh. I saw you comment before and thought it was a joke. You just plug it in and it powers on. No on switch. Power supply needs to be 9 - 12V with min 500mA.
@@DJGhez thank you for replying brotha, I figured it out, my connection just needed to be wiggled around a bit. I wish the manufacturer would of created a on/off switch though still bc I was slowly going insane. Lmao. 🤘🏽
(This information teaching video was very and really good helping me. ). Can I use a DMX App for my phone to wirelessly to control the head moving light? I’m I don’t have a controller board but I heard there’s DMX 512 Software.. but I’m curious if I can use a DMX app to 1 DMX M512 100 Watt U King Head moving light. I don’t want to buy a light controller board. So I’m thinking of trying a few apps for the U-king 100 Watt RGBW Head Moving Light.
yes you can, BUT unless you purchase High QUALITY semi expensive software and the interface controller, it is unreliable. do yourself a favor and just buy a dedicated dmx controller as they are going to be cheaper then the software/interface combo. If you dont care about glitches, you can try some of the cheaper made stuff but you will need to purchase at lease an interface.
have you had any luck being able to edit scenes/chases via computer than uploading the saved back to the device? Currently there is literally 0 videos on how to accomplish this.
I need help programming cold spark units with a DMX board. The have DMX inputs and can be daisy chained. I have no idea where to start... Anyone have step by step instructions? Here's what the cold spark manual says: Channel 1: 0 = Spark effect off, 1-255 Spark effect on. Channel 2: 0-20 pre-heat off, and the first channel is invalid. 50-100 Pre-heat on, and the first channel is valid. 150-200 Clear material, and the first channel is invalid...???? This makes no sense to me, any help would be appreciated.
To start, just plug one unit into the dmx controller. Set the unit to DMX address and to channel 1. On the controller select fixture 1 and move channel 1 up. This should correspond to channel 1 of the unit's manual.
If you want to preset a whole soundtrack and let the DMX controller do all comandos by itself synchronizing all movements to the soundtrack. how do you know where to program / insert the comando to activate, for example, the right timing of a strobe at a specific point in the soundtrack to imitate a lightingstrike or an explosion in that soundtrack without letting it react to the sound of a person's voice? 🙄 Or for example, making a movinghead change its position on only every 4th kick on the bassdrum instead of every kick? Do you need to count mount of the beats in the soundtrack? Or do you need to program all scenes and fixtures all in 1 chase to make that possible. 🤔 How does that work with a DMX controller to accomplish that? 🙄 Is it possible to make a tutorial to explain that, please. ? 🙄🙂🙏 Or can it only be done with a computer 🙄 Best regards
Almost 1K subscribers! Any help would be greatly appreciated!
Hey I noticed you are using the ch-31 truss! Could you tell me what is the diameter of the truss tubing so I know which o-clamps to buy before I order one of these?
@@colinnitros2433 This is the truss I'm using and it's 1.50" tubing. www.123dj.com/lighting/stands/lts500.html
This was super helpful, thank you!
I can't say thanks enough for breaking it down like this. I've been clicking on videos for days and going nowhere fast - I think this is the perfect explanation, at least for me! Great job, I'm subscribing!
I had this controller for almost 3 years and because of your video, I was able to program it with 3 head lights and a laser and it is amazing to do it automatically. because I had used it manually I can program it faster. thank you for making it simple.
I like that you showed us on the DMX controller what the sliders and buttons do and what they correspond to in programming. This really helps me understand how to program. Now I need to connect some lights to my DMX controller and see it for myself. Thank you for your explanation.
thanks for breaking it down like that. This was very helpful. Started from zero knowledge of dmx and have been slowly getting a grasp, but still way more questions than answers. The way you explained and diagramed everything makes it so much easier to understand. thanks again.
THANK YOU THANK YOU THANK YOU for finally explaining DMX the easy way!
Finally an explanation I can understand ty! I been watching videos and just being confused for days!! You nailed it for dummies like me 😂😂
As many others have already said “Thank You!” for making such a great tutorial! I have this exact board and this is now my go to refreshing my understanding of this controller. Only use it on Halloween so I don’t remember it as well as I would like. You have saved my bacon so to speak for another year. 😅 Thanks and wish you the best.
Always a pleasure!!
I now see how you could very easily make a career out of setting up and controlling systems like this. Very informative video, thank you.
Thank you very much. You have just cleared the fog hanging over the whole issue of DMX 512 information. The mfg/suppier's approach is that you already know how the system (s) work. The white board is a great way to "lay it all out" for us older (I'm 70 yr) newbies doing community theater. (Orion Orcan fixtures/Rockforce 384 controller)
Brilliant video for total beginners like myself new to DMX 💫✨✨✨💫☝️
Thank you! I just ordered the same controller, and didn’t have a clue, and you explained it very well. Much appreciated!
This was a great quick explanation. Thanks!!
Thanks. I recently retired and I want to start a whole new job lighting for local bands for free.
Thank you This def helped!
A really great explainer for dmx address moving to channels
Mate thank you so much! Very very helpful! I now just need a controller I'm looking at avolite pearl 2000 or zero 88 frog 🐸 ( kinda throwing myself in at the deep end here!).
Can't believe I've waited so long to learn about dmx! It helps that you have gone back to the very very basics and taken the time to show us! Thank you from the very bottom of my heart!
How much do these controllers cost and do Amazon UK sell em
Thanks dude! Clearly explained. Wow! Now I can show this to my team.
So in regards to scenes and all that; do y'all just like, remember what each one is?
This is great! Thanks :)
Awesome video - Thank you so much!
Great video it help me a lot
Clear as mud !!
Excellent thx so much
on the chase can you program the speed how long it take for the light to get to the the program spot
Hello question could I use my beam 230 beam control
I really love this video. I was ready to give up on that thing, but you give me hope and I think I will get it one day. I have a small stage, please give me an advice. Do you think 2 Inno Pocket Scan, 2 Pocket Roll, 2 Pocket Spot, 1 Chauvet DJ Rotosphere Q3 Effect Light and 1 Black lightADJ ECO UV Bar DMX Effect light would be good and what kind of DMX Controller you think I should get? Well, by the way, I like yours, it seems simple. Thank's again for the video. Very helpful
Hey man. With that variety of lights and no par cans or floods, I'd say you definitely want to use a controller that runs scenes and chases more so that you moving channels or dimmers. I would get a controller with 8 channel sliders and set your pocket spot and rotosphere to run in 9 channel mode. The pocket scan and roll will only run in 6 channel mode. Honestly not being biased but I would recommend you get a controller just like mine for your application. Here's a link - www.pssl.com/American-DJ-DMXOPERATOR-Automated-Light-Controller
I'm starting to get the hang of how to use my DMX controller; however, is there any way to make the lights "wave" around with this controller? I have this same controller and was wondering if this was the way to go in order to make the lights "wave."
Good afternoon. I am a husband who is running a light board for a community theater. I am not a lighting designer!
The theater just installed new ADJ lights: Specifically four ADJ PAR Z120 RGBW units. The setup on the board is as follows:
- Light 1 -> Assigned to Fixture 1 (channel 8, address 1) -> Faders 1-4 on the operator board are RGBW.
- Light 2 -> Assigned to Figure 2 (channel 8, address 17) -> Faders 1-4 on the operator board are RGBW
- Light 3 -> Assigned to Figure 3 (channel 8, address 33) -> Faders 1-4 on the operator board are RGBW
- Light 4 -> Assigned to Figure 4 (channel 8, address 49) -> Faders 1-4 on the operator board are RGBW
You can see the problem with this setup. While I have individual lighting control as individual fixtures, I cannot have Red on light 1/figure 1 and Green on light 2/figure 2 as sliders 1-4 on channel selection A on the DMX operator board have the same assignments.
I would like to setup the DMX board to have the following setup:
- Light 1 -> Assigned to Fixture 1 (channel 8, address 1) -> Faders 1-4 on the DMX Operator Board (Page Select A) on the operator board are RGBW.
- Light 2 -> Assigned to Figure 2 (channel 8, address 17) -> Faders 5-8 on the DMX Operator Board (Page Select A) on the operator board are RGBW
- Light 3 -> Assigned to Figure 3 (channel 8, address 33) -> Faders 1-4 on the DMX Operator Board (Page Select B) on the operator board are RGBW
- Light 4 -> Assigned to Figure 4 (channel 8, address 49) -> Faders 5-8 on the DMX Operator Board (Page Select B)on the operator board are RGBW
This way I can have individual colors on all four lights at different times.
I just have 0 understanding of how to program the lights to be assigned to different faders/page selects on the DMX Operator.
Do you still need help?
Very informative THANKS. Still a bit insecure how to save Scenes…. I got the impression that You could save all channels ( like a screenshot) in scene 1. But then I understood you fx have to save the values of one fixture at a time in scene 1 ?
It is a screenshot. Select the fixture, move the channels to do what you want, then deselect the fixture. While in Program mode the fixture will stay on whatever you had it do. Then repeat with the other lights. When all of them are how you want it save the scene.
Very clearly explained! Cudos mate! Though I it wasnt 100% clear to me how you actually insert each scene into a sequential order when creating a chase seq. I imagine you press prog-chase to be in program chase mode, then click on each scene button of a particular bank - and it automatically inserts that scene in the order you press scenes. Please correct me if thats not correct.Also, whilst selecting each scene, how do I control the brightness level of each scene (ie sc1 bnk1) as I program scene into a chase. Cheers
Your adding scenes to a chase so the order you add scenes is the order they go in. In program mode, you click the chase you want to add scenes, then go to the scene using scene and bank buttons, and click the button to add the scene. Forgot the button name but it's in the manual. Scene brightness is set by the fixture, not the scene itself
@@DJGhez gotcha. Thanks. So to be clear, i select/hold the add button (like I would creating the scene in first place) and click scene button.
And with brightness of scene that should be set when creating the scene and not controlled when adding
Scene to chase, or whilst playing chase seq?
@@ademjaffers1035 you got it. That should work
Hi thank you so much for this information. I have been trying for days to get just basic information on programming our elation stage setter 24 dmx controller. The man that programmed it originally did not do it correctly and we would like to fix that. Basically we have 8 par can lights and 4 wash bar lights. Currently he has the fader programmed where 1 is red on lights 1 & 2 and fader 2 i is green on lights 1 & 2 fader 3 is blue and then fader 4 is red for lights 3&4 and so on. I know this isnt the way its intended but i cannont find any information to program it correctly. Is it possible that we can assign each light a fixture number and then each fader adjust a channel of the light, for instance light has 7 channels. Can each fader adjust a channel and you choose each light by choosing the fixture. Thank you for any information you can share.
Are the channels the same for all lights? Do you want all the lights to show the same color at the same time?
HI I have the that controller "ADJ DMX OPERATOR, BUT I NO NOT SEE A EXTERNAL MIC.
The mic for Audio is internal.
But when I deselect ficture, why does the light black out?
When you deselect the light, it will go back to whatever state it would be in on the current scene. In order to have it not change, you need to be be in program mode.
How do you turn this controller on. Idk if I have a faulty controller , but I have yet to find a video that actually starts out with the most basic thing about this controller; turning it on. Not even in the instruction manual can I find the answer to this question ..... going to keep on trying things for now...
Oh. I saw you comment before and thought it was a joke. You just plug it in and it powers on. No on switch. Power supply needs to be 9 - 12V with min 500mA.
@@DJGhez thank you for replying brotha, I figured it out, my connection just needed to be wiggled around a bit. I wish the manufacturer would of created a on/off switch though still bc I was slowly going insane. Lmao. 🤘🏽
(This information teaching video was very and really good helping me. ). Can I use a DMX App for my phone to wirelessly to control the head moving light? I’m I don’t have a controller board but I heard there’s DMX 512 Software.. but I’m curious if I can use a DMX app to 1 DMX M512 100 Watt U King Head moving light. I don’t want to buy a light controller board. So I’m thinking of trying a few apps for the U-king 100 Watt RGBW Head Moving Light.
Sorry man. I've never used an app to control lights. Maybe someone who has can comment.
yes you can, BUT unless you purchase High QUALITY semi expensive software and the interface controller, it is unreliable. do yourself a favor and just buy a dedicated dmx controller as they are going to be cheaper then the software/interface combo. If you dont care about glitches, you can try some of the cheaper made stuff but you will need to purchase at lease an interface.
Shawn Turillo Ok
have you had any luck being able to edit scenes/chases via computer than uploading the saved back to the device? Currently there is literally 0 videos on how to accomplish this.
I don't believe the Elation Operator can. The best it does is use Midi to be controlled by a keyboard.
I need help programming cold spark units with a DMX board. The have DMX inputs and can be daisy chained. I have no idea where to start... Anyone have step by step instructions? Here's what the cold spark manual says: Channel 1: 0 = Spark effect off, 1-255 Spark effect on. Channel 2: 0-20 pre-heat off, and the first channel is invalid. 50-100 Pre-heat on, and the first channel is valid. 150-200 Clear material, and the first channel is invalid...???? This makes no sense to me, any help would be appreciated.
To start, just plug one unit into the dmx controller. Set the unit to DMX address and to channel 1. On the controller select fixture 1 and move channel 1 up. This should correspond to channel 1 of the unit's manual.
I’m still lost
Oops! My last comment should have come from me Donald White and not my daughter Trish. Tks
tbh just mess with the console
instead waisting itme tbh reading manuals
If you want to preset a whole soundtrack and let the DMX controller do all comandos by itself synchronizing all movements to the soundtrack. how do you know where to program / insert the comando to activate, for example, the right timing of a strobe at a specific point in the soundtrack to imitate a lightingstrike or an explosion in that soundtrack without letting it react to the sound of a person's voice? 🙄
Or for example, making a movinghead change its position on only every 4th kick on the bassdrum instead of every kick? Do you need to count mount of the beats in the soundtrack? Or do you need to program all scenes and fixtures all in 1 chase to make that possible. 🤔
How does that work with a DMX controller to accomplish that? 🙄
Is it possible to make a tutorial to explain that, please. ? 🙄🙂🙏
Or can it only be done with a computer 🙄
Best regards