TIG Welding For Beginners | 3 Proper Steps Every TIG Welder Should Know !
HTML-код
- Опубликовано: 29 июл 2022
- TIG Welding For Beginners, and 3 Proper Steps Every TIG Welder Should Know!
These beginner-friendly steps are about, Joint fit-up and alignment, tacking, purging, and TIG welding open root technique with pipe in position! This video is also about the lay wire or constant feed technique on the root or wiggle motion with the tig torch. Video gives the viewer good insights on how to set up for success, and place good and solid root pass. With the appropriate training and practice on the part of the operator, learning to freehand root can become an invaluable skill!
#tigwelding #tig #extremetig
None of these videos are recorded in a fancy shop surrounded by sponsorship banners!
All of my videos are recorded at working sites in various locations, and in different welding positions.
90% of my welding projects in videos are x-rayed, and if you like to see hands-on projects, welcome!
If you liked this video please give it a thumbs up, share it, subscribe, and click the bell.
It doesn’t cost you anything but massively helps my RUclips channel. Thank you.
Support this channel with 🔔 Subscribe and 👍 Like!
/ x3mtig Наука
Man, you seriously deserve your channel to grow so much more and I hope you will get many more subscribers. I think it takes a lot of efforts and work to film and edit these video, and just welding by itself it’s really hard work, as we all know it. I don’t like many other” famous” channels as they mostly have only fish bait videos with content that isn’t helpful at all! Watching your videos has helped me so much to level up and become a better welder! Thank you so much bro! 🤩🤛🏻
Thank you very much for your comment and support brother. I am really happy to hear that my video’s are helpful as this is the purpose of this channel. Once again thanks a lot 💪🙏
I agree, you’re really good and I’m happy I found your channel!!! Keep doing more videos man some great content! Thank you so much
@@fificboi thanks brother 🍻👍
I agree. The most helpful videos on RUclips.
You make it look so easy. Great video. Keep’em coming! Thanks
Thanks!
Thank you so much! I learn a lot with your videos
❤❤❤ Thank you very much sir for the knowledge
Базар жоқ братан
Love your videos bud and I really appreciate how you explain every single move you do. It’s so beneficial for us who are beginners at tig welding. My hat is off to you! 🤛🏻👨🏻🏭🥇
Thanks bud I appreciate your comment 💪
This is great keep up the good work!
Thanks this very helpful
I just want to say a huge thank you for posting so many excellent pipe welding videos! I really like seeing how you tackle jobs on site. Watching this channel has given me the knowledge and confidence to go for a better job and progress my career. Genuinely life changing! Thank you so much! 👍
Thank you very much!
Excellent video thanks for this
Genijalno!!! Hvala puno za pojasnjenje.
Hvala na komentaru i nema na cemu. 👍
Thank you very much
Keep it up man, love it! 😎
Phenomenal! Thank you for thorough explanations, it really helps a lot! 🤩
Thanks, appreciate your comment 👍
Good review thank you❤
I am super impressed with your skills brother ! Thank you for all you do! Your skills are next level👍🏽🙌🏾
Thank you brother 🙏I appreciate your support 💪
Very nice techniques, more tips share please 🙏🙏🙏
Incredible channel. Keep up the work. Love to see welders from outside of the US.
Thanks bud, I appreciate your comment 👍
Well explained
Right On
Very interesting My friend. . Salutttt from WELDER MIG 🇮🇩❤️🔥
Very good explanations! Especially when the gap closes up.
Thanks brother 👍
Beautiful Vid from which I took a lot of useful info for myself, especially filling up the gap. Thanks a lot and greetz from Holland, Marcel Knippers😀
Thanks brother, I’m glad you liked it, cheers to Holland 🍺.
Respect bro.Wow
Great video! Amazing welding skills, a very helpful and educational channel, and big thumbs up for your explanations step-by-step. Like it a lot👍
Thanks brother 💪
Excellent video for beginners Multi coded pipe welder Scotland 👍🏴
Thanks brother, greetings to Scotland 🍻
Great videos my man we appreciate your work ethic I know sure as hell your boss does !
I appreciate that
I’m not new to tig welding but I am new to pipe welding. Great video lots of useful info. First couple tig roots I did in pipe had lots of inconsistency and suck back. Gonna keep at it and see if the can get better
You gotta burn to learn buddy 👊
hey love your videos im at a combo weldintg school and special alloy, on lift arc when not doing a scratch arc motion when and where / how is it safe to lift arc off the pipe to not get any tungsten inclution / breaking of tungston, should you always lift arc on the side of the bevel and is it ok to be having the tungsten stuck right as you lift arcing and have to wingle it loose and then start your free hand ????
Goooooooood👍🤘
nice
Man this is so good... New subscriber here😊
You are incredible tig welder indeed. Why are you doing fitting part yourself? Shouldn’t that be job of fitters? You are all in one my man, genius!!!✊🏽👏🏽
Hey Mo, thanks for your comment brother. I like to do fitting by myself sometimes as I don’t have patience for pipe fitters , they making science fiction out of fit up.😉Just to show them that I can do their job but they can’t do mine.😂
@@X3MTIG 🤣
Like is that very good welding❤
🔥🔥
Amazing tutorial man!
Glad you liked it!😎
A purge video would be cool.. show how to determine proper purge..
Thanks, great video! Haven't you tried special soluble rice paper for purging? Maybe can save some time i.e.form small chamber and purge through the gap or drill a small hole to the side from the weld
Hey bud thanks for your comment. I did weld with that before, and with needle purge as well , but for this particular project, it’s not allowed, I will explain more in my next video.
Elegante
You make awesome videos. I wish they were around twenty or so years ago.
So do I ! 👍
Love your vids mate keep it up
Thanks brother 💪
Really nice Mr
Thanks bud, hope everything is going good for you 🍻
Boss im from india, i like to your video and really you are very good explain every video ,thank you so much
Thank you my friend 👍
Good video for beginners, for sure. I myself use the keyhole and dab from start to finish, with a 5/32 gap 3/32 filler rod .But my amperage is lower than yours
Excellent vid m8 did u run the buffing wheel between root and hot pass tho? I'm learning pipe atm on 6 inch carbon slowly getting it, is stainless that much different to weld?
Hey bud thanks for comment. Yes, I did use buffer between passes. To answer your last question, yes it’s different tho . Requires little bit more skills, more arc control and proper set up prior to welding.
fa club brasil x3m tig goooddddddddd jobbbbbbb👋👋👋👋✌
Awesome. Great video. Could you do a tutorial on a 4g overhead tig?
Thanks, yes I might one day!
Please translate Persian🇮🇷 please☹️ you are the master of the blacksmith and I would like to be your student
Good job
Thanks bud 👍
I wont to luner mor
When closing the root, do you have to turn down purge or did you leave it as is?
Hey bud thanks for your comment. I just leave it as is. In case if purge is pushing your puddle out, especially when closing, you can turn down.
Hi.. can you do a 2g ss big pipe root.please ,thanks i love you video....
Ok I will try
Subscribed you deserve it! Thank you for sharing your knowledge with us. Can I ask where are you from ?
Thanks buddy, I appreciate that 👍 I am from Croatia , but live and work in Canada!
@@X3MTIG Poznao sam ti dijalekt ;),stvarno si doktor , bili mogao neki tutorial o tig lift da snimis? Ja se bavim zavarivanjem ali tig nisam savladao.Pozdrav od Crnogorca.
Nice vide mate, what type of gas do you use for purging??
I prefer a mix called Formier gas, argon/helium/02
Thanks bud. I’m using just Argon for purge.
@@X3MTIG any reason for using pure argon ?
What tools are you using to measure your landing .. that good thing in your hand ?
Hi-low gauge
Man, you do awsome work, how long have you had a tig rig in your hand
20+years
@@X3MTIG no wonder your so good...🤣
I’m very in resting to watch your video brother
I appreciate that
What kind of blade did you use to get the burrs out
Hacksaw blade for stainless steel
Nice vids.. Where are you from?
Thanks bud. I am from Croatia, but I’ve been living, and working in Canada.
sir no landing vevel no problem carbon & stainless steel
How do you record your content?
Nothing fancy bud, with cell phone!🙂
Can someone tell me what is the name of this thing 1:57 , I need to buy it
HI-LO Welding Gauge
Thats a hell of a purge. How much gas does that take?
Hey bud, approximately quarter of 12 packs .
welding up in kitmat?
No bud, never been there.
how you set up your camera hahaj
I don’t understand the purge ? Once you remove the tape to weld it will fill up again … ??
It won’t as Argon is heavier than air…
How can I prevent suckback?
Try with heavier root pass
Are you using a foot pedal? I couldn’t tell.
I don’t use foot pedal, especially not in the field.
@@X3MTIG what are you using then?
@@XTheJenovaProjectX just a remote
I am welder
滴123,滴123
Er! - I wouldn't call rooting a pipe butt weld TIG Welding For Beginners.
Beginners??????
Talentirane pocetnike😜!