Super video, fakat ti nije dosadno na poslu! Odlicno ti to sve objasnis, dobro si svlado svu njihovu terminologiju.Ti da se vratis kuci bi bio najtrazeniji lik nesumnjivo. 😆Pozdrav iz Zagreba👍🏻
One question when you do the laywire technique do you need to move the wire with four fingers to feed the puddle or you just don't? It would be nice a video of different ways or tips to move the wire i'm having provlems with that
@@X3MTIG biggest I got to do was 12” on this job I’m currently on. It was awesome. Hottest I’ve ever been able to run just feeding some wire lol. I’d like to shoot you an email if that’s cool, I dig the new hood btw bro, and the stickers. If you ever wanna sell them I’ll def scoop a couple for the lunchbox lol
Aí sim mestre uma bela apresentação de soldagem com qualidade e grande desempenho parabéns a todos obrigado sempre por estar nos ensinando e orientando como é feita uma bela soldagem de qualidade deixo meus agradecimentos obrigado 🙏
Can remember ,my first vassel like pipe in 2g 😅.my routined college "dont be a scared welder". Put up your amps ,hit that root ,fill with the thickest wire you have ❤
I like to check purge with stainless 2mm plate, I put the plate directly on the gap and hold the arc for some time and if the opposite side of the plate is without oxides and is clean and shiny then purge is Good!
Hey bud, gap shrinks, and it’s not perfectly even, so I’m taking rod out of the puddle to make sure I got good penetration, and also I prefer to dip rod on narrow sections instead of keeping rod in the puddle or lay wire technique.
Is that flip up Sellstrom adaptor on your welding mask good enough? I am currently in search of good flip up passive lens mask. I am in Europe and use Evermatic mask which is not bad but has some issues
Where working at? I’m at genesse you’re the best 488 welder can you make a rice paper demo if you ever get a chance? Do welders like a little land on carbon for tig for my fit up and prep
Thanks bud for your comment! Good suggestion tho, I’ll try when I get a chance, and for the land, I like feather edge on carbon, and little bit land on stainless.
That’s some good work nice job bud. Quick question on some of your arc shots are you using glasses with a camera or you have someone with a camera doing them?
Od svih nas Slavenskih naroda, jedino vi Poljaci uvijek, ali uvijek imate “super pametne komentare” i primjedbe 🤯. Covjek je objasnio da snima ono sta je on zavario, drugu stranu je vario drugi varioc i ocito snima samo svoj zavar! Vama nikad nista nije dovoljno dobro, u svemu nadjete manu!!
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Honestly, i like how you don't talk down about anyone else.
Big welding and nice job looks sharp
Your welding is like your overall temperament…very smooth. Great vids and good weld process & procedures!
nice example, thanks for sharing
You deserve a lot more subscribers
I appreciate your comment brother 👍
Amazing job
Big job I can watch this all day
Great my man, thank you, really slick!!
Thanks brother 👊👍
Nice nice Job
Terima kasih banyak saudaraku.
Saya belajar banyak hal tentang TIG dari channel anda 👍
Semoga lebih sukses dan sehat selalu ❤️
Congratulations on the very careful and attentive work. Question: why did you use a reverse protection with inert gas on carbon steel? Oxidation?
Hey bud, thanks for your comment. I was purging pipe because it is chrome 5 material.
@@X3MTIG What is that piping for? Good job man
Very Nice . So how passes in total to complete ?
Thanks buddy, around 10 passes to complete.
Super video, fakat ti nije dosadno na poslu! Odlicno ti to sve objasnis, dobro si svlado svu njihovu terminologiju.Ti da se vratis kuci bi bio najtrazeniji lik nesumnjivo. 😆Pozdrav iz Zagreba👍🏻
Hej Gorane, hvala ti na komentaru buraz. Mislis najtrazeniji lik da plati rundu 🍺😂. Pozdrav mom Zagrebu 👊
Impressive bro!!!😎
Impressive 👍👍
One question when you do the laywire technique do you need to move the wire with four fingers to feed the puddle or you just don't? It would be nice a video of different ways or tips to move the wire i'm having provlems with that
You always have to feed wire trough your fingers!
How often do you come across a big pipe job like this? I can’t ever get on one
Not very often bud, but when I do I really enjoy doing it.
@@X3MTIG biggest I got to do was 12” on this job I’m currently on. It was awesome. Hottest I’ve ever been able to run just feeding some wire lol. I’d like to shoot you an email if that’s cool, I dig the new hood btw bro, and the stickers. If you ever wanna sell them I’ll def scoop a couple for the lunchbox lol
@@nathanielclause2588 no problem bud fire me an email
@@X3MTIG what exactly are you checking with the lighter? The purge?
greetings from phoenix az
can yuo explain how the remote control works
i got an 250 miller bobcat i hope it works for my
welding machine✌
Aí sim mestre uma bela apresentação de soldagem com qualidade e grande desempenho parabéns a todos obrigado sempre por estar nos ensinando e orientando como é feita uma bela soldagem de qualidade deixo meus agradecimentos obrigado 🙏
Thank you my friend 👊
Excellent work
Do you still continue purging on the hot pass till cover pass?
No, I usually shut it off after first pass of fill.
Can remember ,my first vassel like pipe in 2g 😅.my routined college "dont be a scared welder". Put up your amps ,hit that root ,fill with the thickest wire you have ❤
Good tip!
Question….. for your dogs, what material do you use? Im curious.. same material as the chrome 5 pipe or carbon steel dogs?
Carbon material, welded overlays with chrome tig wire at the bottom part, to have enough meat, and they were PMI tested before use.
Good job teacher...❤❤❤
I like to check purge with stainless 2mm plate, I put the plate directly on the gap and hold the arc for some time and if the opposite side of the plate is without oxides and is clean and shiny then purge is Good!
Thanks for the tip 👍
Por que as vezes você tira a vareta da porça se fusão?
Abraços do brasil.
Hey bud, gap shrinks, and it’s not perfectly even, so I’m taking rod out of the puddle to make sure I got good penetration, and also I prefer to dip rod on narrow sections instead of keeping rod in the puddle or lay wire technique.
Nice job
Amazing!
Is that flip up Sellstrom adaptor on your welding mask good enough? I am currently in search of good flip up passive lens mask. I am in Europe and use Evermatic mask which is not bad but has some issues
It’s really good, I like it personally, and you can always replace them with pipeliner helmets.
Where working at? I’m at genesse you’re the best 488 welder can you make a rice paper demo if you ever get a chance?
Do welders like a little land on carbon for tig for my fit up and prep
Thanks bud for your comment! Good suggestion tho, I’ll try when I get a chance, and for the land, I like feather edge on carbon, and little bit land on stainless.
Wow this is crazy, right now we’re on a job doing a 24” 36” and 42” pipe. It’s all prepped and cut, now we are fitting it up. Very sketchy
What a monster pipe
That’s some good work nice job bud. Quick question on some of your arc shots are you using glasses with a camera or you have someone with a camera doing them?
I have someone with camera
Filler wire code and material?
Are u in the states as a PF probably put west lotta great Russian welders out there 🧐🧐 keep up the amazing content
Very good👍👍👍
What auto lens do you use?
Optrel
@@X3MTIG thanks bro gonna check then out
Excellelt ģood job
I'm use only 2 perching hoss in 42 inch
Nice job "streatch that puddle" 🤘
❤
Nakręć odcinek ze spawania całej rury nie tylko przetopu
Od svih nas Slavenskih naroda, jedino vi Poljaci uvijek, ali uvijek imate “super pametne komentare” i primjedbe 🤯. Covjek je objasnio da snima ono sta je on zavario, drugu stranu je vario drugi varioc i ocito snima samo svoj zavar! Vama nikad nista nije dovoljno dobro, u svemu nadjete manu!!
To much perching hoss
Always goood content, keep on pushing and uploading-
Welder to welder 🫡
Always!