How To Check Transmission Fluid In Your Jeep/No Dip Stick No Problem/How To Make Your Own Dip stick
HTML-код
- Опубликовано: 8 июл 2021
- FOR THE BIGGEST AND BEST PARTS CATALOG, CHECK OUT DORMAN PRODUCTS AT: www.dormanproducts.com/pages/...
Авто/Мото
Авто/Мото
⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Thank You!
DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ
5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI
Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT
CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3Nux6UL
ANCEL V6 PRO Bidirectional Scan Tool: amzn.to/3wRcvDy
CASOMAN Master Torx Bit Socket and External Torx Socket Set, 60-Piece Set: amzn.to/3NbWUpe
Thorstone No Spill Coolant Funnel Kit: amzn.to/3m1dADS
can you link the dipstick
I have a 2015 Jeep compass. Bought it last year from the dealer. Low mileage. Mint condition. First time in over 20 years that I have purchased anything from a dealer.
And today I just realized thanks to you, that I don’t have a dipstick. Because periodically the transmission shifts horribly, and I was just going to verify that the fluid level was correct.
Greatly appreciate you taking the time to make this video.
I know it's an older video but you sir do a hell of a good job.
Thank you very much jason !!!
Thanks dude I appreciate all the help I'm here in Swartz Creek Michigan glad I subscribed to you long time ago!
Dude awesome thanks Matt and hello neighbor happy to have you onboard we appreciate folks like you
I even use the twist-on cap that was in the filler hole. Drilling a hole in it to accept the red handle on the dipstick. With the rubber washer on the red part and super glue, it seals the hole. Then you have an air tight fitting for the dipstick.
Definitely going to do this to my WK, annoying as hell that they never came with a dipstick
Have a 2011 liberty and 2004 grand cherokee the trans dipstick from the 04 gc fitts perfect no modifications went to salvage yard and got on for 5$.
I checked out the dipstick that I made.
It is the correct length.
The total length of the dipstick from top of fill hole to bottom is 39 inches.
If I could I would send pictures.
After knowing the correct amount of fluid is in, can't you just put a universal dipstick in and cut it the proper length, rather than joining the two together?
Thanks Bubbles
I will take that as a complement that dude is a freaking genius…..
I’m from Muskegon too!
That’s kick ass hopefully my video was helpful
Is ATF+4 for the W5A580 Mercedes transmission?
Hey Mr. Clay I got the same dipstick That is on this video on my 07 Jeep commander now I push it in and it stops but Then I Apply A little bit Of Pressure and it goes Further In. am I going too far is it. On the first try where I just gently push it in stop but has no fluid reading at all what Then I apply applied the pressure it goes in and I get a reading but 80 to 90 on the Dipstick
Where will are going to get the dipstick
How long was that dipstick after you cut it
Have a2020 jeep renegade how to check Tran fuild
How many quarts
I just seen a video on jeep liberty all you have to do is use your oil dipstick... Works same as oil 🛢️
I have a question about something
I live in Muskegon. Can you make me one i have a 06 Jeep Grand Cherokee Laredo 3.7
The KK transmission can be checked with the engine oil dip stick when the car is cold. Just poke it in until it hits the bottom of the pan and the oil level collerates to the engine level mark, just clean the stick really well between engine and tranny.
I have a 2007 Jeep Commander 3.7
The issue I have is, no dipstick was included, only a twist on cap.
I've bought the generic version dipstick and made my estimations for its length.
The correct fill point I've seen videos should be a the 70 mark on the dipstick.
The issue I have is, when inserting the dipstick it seems to bottom out but with alittle more pushing on it it goes in about another 2-3 inches. Which is the correct length?
I've settled for 39 inches but don't know if it's correct? Filled to the 70 mark but seemed to have trans slipping still.
Now at 90 mark, no slipping.
How long is the dipstick that you have?
And I understand that the 4.7 and 5.7 may be different?
I also realize, if you overfill the trans, that can create issues also or ruin your trans.
I have a 06 Commander with the 3.7 as well. Did you ever get it figured out? Have trouble now and there's not much info out there
@jaronwhite4320 I just have it like I explained, 39 inches for the dipstick and fill to the 90 mark....all good.
Drilled a hole in the trans fill cap, fed cable through, glued cable top "handle" to trans cap, cut down and spliced the dipstick cable 39 inches.
Someone had a "how to" on RUclips.
At least you'll have something to go with on the trans fill.
Remember, try not to overfill. Like I say, I put fluid to the 70 mark at first, then drove for while and still noticed slipping then to 80 and settled on 90.
That's 39 inches from top of fill tube...bottom of cap, where it meets the tube.
Ok so I have a 08 jeep grand cherokee laredo 3.7 and under the hood looks exactly like the one in this video. So should I do the exact same? Because the vehicle chart didn't have the right year. Or does that even matter?
Same as his. 75-80
If I get a 50 and needs to be 75. About how much am I low?
where do you add the transmission oil? can you add it from that whole?
Yes
That's so f*#ng crazy. An automatic transmission without dipstick..!!
How can I check the transmission fluid temperature on 08 jeep grand Cherokee 3.7l v6 so I can check my fluid level?
Just let it warm up to the needle is in the middle then you can check it you don’t have to know specifically if it’s 100% warm or not
But a thermo gun. Point it at the transmission pan and correlate it with the graph that the dipstick sheet came with. 115F is around 40mm on the dipstick.
How do you measure the fluid temperature so you know where to look on the chart?
Just start the vehicle up and wait till it gets up to operating temperature it will coincide with one another or you can look at it on live data with a scanner
@@sharpcarco ok, perfect, thanks!
But how do you actually measure the temperature without a scanner? Using the temperature gauge on the dash?
If the dealership finds out an owner tampered with the transmission dipstick the warranty is voided. My cousin found out the hard way, thankfully he was nearly out of warranty and about to sell the car.
Lol nothing this old has a warranty still... hasn't for years. And still not true, they can't void a warranty because you or a non dealership mechanic serviced the vehicle without providing your or your agent not only serviced it with unapproved parts/techniques, but those parts/techniques were directly at fault for the warranty claim in question. If your cousin allowed them to do that he is dumb and they knew it.
How did you check the temperature of the engine?
With a scanner, but if you let it run 10 or 15 minutes, it’ll be fine
Hey buddy I'm sorry to bother u but I'm wondering how much longer is the trans dip stick is it how much longer is it then the oil stick
Mine is about maybe 6 inches longer than the oil dipstick does that sound about right? I'm kinda small so I don't know what gittin bottoms like
What did dipstick length end up being?
I’m sorry I’m pretty sure I put that in the video that would be a pretty important thing to leave out….. I suppose it’s possible.
And I wish I remembered
That tape stuck after oily fingers on it?
Of course, tape is amazing
The tranny dipstick is broken off inside the hole on my Jeep Patriot. NO mechanic will or can address this issue. HELP!!!😩
That’s actually pretty easy to rectify
Take the trans pan off, knock it out and then replace it .
@@sharpcarco
Thank you!!!
The mechanics just keep telling me, we can't check it with a broke dipstick an send me on my way!!!🤷🏼♀️
electrical tape?? No f*n way, dude! This is asking for a problem. If you don't weld, have someone spot it in a few places.
Terrible engineering to not include a dipstick. It shouldn’t be this hard for the consumer to check their fluid levels.
$5 for the dipstick buddy
Not the point , and things change ….. but thanks for the 2cents
@@sharpcarco ... I was trying to buy your dipstick...
Pulled out that meth lighter
😂😂😂😂
Why don’t you do it the right way??
What is the right way? Does a person at home have the ability to do it the right way in their driveway? With next to nothing… is the right way going up and paying the steelership to do it for you? I’m assuming that’s the right way that you’re speaking about