For the keyhole flip f2l case, be sure to utilise wide U moves, for setting up the flip in your dominant hand, and after to more the pair towards the back freeing up the front
So if you still haven’t rewatched these tips, you probably should. BTW, for future reference, if you’re learning something else and click on a video on RUclips about it but you can’t understand and you can tell it will be useful later, you can save the vid to your watch later or maybe put it on a playlist of things on that topic to watch once you’re at the level where you can understand it so you can watch the vid when you understand
I feel like jperm is stalking me exactly when I need something he will post a video on it I did not expect this many people to see this comment and like it thanks
Fake well, I love GAN cube but why are soo expensive and out of my budget. I was thinking about buying a costume made valk 3M. I use GAN M, but a piece is broken, sooo..... If anything, tell me a reason why you probably think I don’t need the Valk 3M Sorry for writing so much
Me watching cubing videos vs me actually implementing tips and tricks No, even better. Me making cubing tutorials vs me actually being good at them myself😂
J perm: shows slower insertion and faster one Me: learns the slower insertion because its faster than what i do. Il leave faster one until i get much more advanced. Thx j perm
Very helpful, wanna see more F2L, even if you're rehashing F2L cases that are basic for you :) I know you have other videos on F2L. Repetition makes perfection.
I love your thumbnails because when I am deciding to take a break from cubing I see your thumbnails of you turning the cube and then I start doing solves
The only thing keeping me from consistently averaging sub 15 or getting a sub 10 single has got to be my specific advanced f2L cases. I will be drilling these :)
Sajdok všeho druhu I would say better f2l than oll because if you know what case will come after you solve the yellow cross OLL can still be kinda fast. But I still think you should try to learn a new oll every once in a while until you have an dedicated efficient alg for most f2l cases
Well, I average low 14 and think I am probably too slow to advise you on that. But, I personally think that look ahead is just something that sort of comes as you get faster. But, forcing yourself to look at pairs you are not solving while doing slow solves could help
@@cookiecubing1235 Spring Compression. The diffenrce with moyu system is, the lower the spring goes, the stronger the spring(Gan) while moyu is, the higher it goes, the stronger the spring(Moyu) And the GMS(Gan Magent System) has changed The weight is lighter. About 68 grams
You should do a video on pll recognition. Because my solves are really good up to the point of pll recognition. I know all of my plls but it's hard to tell which one it is if their not lined up.
Jperm’s channel is my favorite, but only one thing about it bothers me. His logo is 2x2, when j perm on a 2x2 is the same as t perm, and 3x3 is his main. Other than that, happy thanksgiving to Jperm, along with everyone else reading this
Good idea! Ive tried that before but it was hard to think about, especially since sometimes the other pairs are in horrible positions. But maybe I'll give it a shot again!
@@JPerm it is most useful if you have last two pairs in a front, i got that scenario officially in final :D i did something like R U' R' u' which solved edge of the other pair and move my last two unsolved pieces in a front right, amazing feeling even thought solve was 9 :D
@@matejgrohmann2736 Yeah I've had the feeling that only using multislotting when it's "really worth it" may not be the right approach, kind of like how you can't just learn 20 ZBLLs and expect to be any good with it. Maybe just finding more situations to multislot would make you faster at multislotting the easy cases too.
2:30, say this was the last pair, I would do R2 U2 F R2 F’ U2 R’ U R Edit: 2:52 for the keyhole flip, you could also do the flipping alg from a big cube I guess that saves a rotation the way you did tho
3:15 Feliks used in his sub 7 avg solve
he used it on his 3.41 too ^^
Also on his 3.14159
@@FuckFascistRUclips also on his 3.14159265358979323426
@@sparrowthenerd Username checks out lol
@@FuckFascistRUclips lmao
For the keyhole flip f2l case, be sure to utilise wide U moves, for setting up the flip in your dominant hand, and after to more the pair towards the back freeing up the front
1st Trick 0:06
2nd Trick 0:53
3rd Trick 1:59
4th Trick 2:15
5th Trick 2:42
6th Trick 2:58
If you wanna use one you must give me free F2L pairs
When you just learned the beginner F2L then he makes this vid and you have no idea what he’s talking about?
U r right
Then don't watch this nub
@@Rolliapocx Don’t call someone a nub. Just say “Don’t watch it” and leave the nub part out
So if you still haven’t rewatched these tips, you probably should. BTW, for future reference, if you’re learning something else and click on a video on RUclips about it but you can’t understand and you can tell it will be useful later, you can save the vid to your watch later or maybe put it on a playlist of things on that topic to watch once you’re at the level where you can understand it so you can watch the vid when you understand
@@goldenwarrior1186 yes, that is how RUclips works
I feel like jperm is stalking me exactly when I need something he will post a video on it
I did not expect this many people to see this comment and like it thanks
you just got memed lol yea I was looking for a video like this
I know I’m barely getting better and I see this video
yeah same
Same lol
Me too
WOW. Those tips help a lot.
Now I just have to learn to implement it on the spot 😅
Relaxed Cubing hey random person, I’m going to ask you a question. Which do you think is better, GAN Xs or Valk 3M
😂😂 yeah
Fake well, I love GAN cube but why are soo expensive and out of my budget. I was thinking about buying a costume made valk 3M. I use GAN M, but a piece is broken, sooo.....
If anything, tell me a reason why you probably think I don’t need the Valk 3M
Sorry for writing so much
Me watching cubing videos vs me actually implementing tips and tricks
No, even better. Me making cubing tutorials vs me actually being good at them myself😂
@@thatboynitro Gan XS
a few days ago i start watch and learn the "advanced F2L Tutorial" and it helps me so much, so lucky for me that you load this up.
J perm: shows slower insertion and faster one
Me: learns the slower insertion because its faster than what i do. Il leave faster one until i get much more advanced.
Thx j perm
That's dumb
Just learn the faster insertion now. It might take a bit longer to learn but will be helpful in the long term.
Keep uploading the good content
Thx that's what I need
That XS looks good! 😎
Very helpful, wanna see more F2L, even if you're rehashing F2L cases that are basic for you :) I know you have other videos on F2L. Repetition makes perfection.
Yes more f2l tricks please!
Love these videos J Perm you've really improved my f2l (Thx a lot)
yeah Jperm we want more thanks that helps a lot
Thankyou for f2l video, f2l is a kind of barrier for me right now .. plzzz more videos like this (cross and planning 1st f2l pair)
Yes yes yes. F2l tricks are very useful. Please more.
Ooop I’m HERE!
Thank you for blessing us with your tips for F2L
Fanx for that video, pls more vids of this kind!
i was just learning f2l nicely convenient for you to upload new tutorials we appreciate it man.
Yes , WE want more of these
Just when i was training to get to sub 10, this comes out. Thank you
Moreeee!! Thx that helped a lot
I was waiting for a video of yours on the F2L :D
Hello to my fav RUclipsr
Please do another I always seem to learn something from you no matter what
Jperm I love your vids💙
This is exactly what I wanted to watch!
This is like a review of all your f2l videos
Just as I was planning to learn some advanced f2l algs. Thanks and i would appreciate more of these
You are my favourite RUclipsr jperm🙂
I love your thumbnails because when I am deciding to take a break from cubing I see your thumbnails of you turning the cube and then I start doing solves
More pls. These aren't hard to visualise or remember at all but they're so useful.
Hey, this rrally helped me. Hope you upload more often. 😂
a rare 3 minutes video from jperm
That's the stuff for which I subscribed 😍
What are the best budget cubes from 2x2 to 5x5 and Skweb?
I've been bad at F2L and suddenly J Perm posts me this video!!!
I reallly love your video so much❤❤🔥🔥
YES I WANT TO SEE MORE OF TRICKS LIKE THESE FOR F2L
Just what I needed. You are going to get me sub15
What do you average? I'm also trying to be sub 15.
16
Your good at explaining👏😁
No view 23 likes 13 comments.
Man your vids are so good they break math
True
Its the drugs
Ok
hey Jperm- can you do a review of the gan 356r please.
J perm which one do you prefer? Stickerless cubes or the stickered ones
The only thing keeping me from consistently averaging sub 15 or getting a sub 10 single has got to be my specific advanced f2L cases. I will be drilling these :)
Nice tips.cery helpful by the way
Your videos are always good
Excellent! More please!
Finnaallyy jpermmm
These tips are superb
I love these tricks
Plzz make more vedios like it
Hi, i just wanted to ask everybody here for tip. Im 2look oll and full pll and now im kinda stuck on 24 avg. What should i learn now?
Sajdok všeho druhu I would say better f2l than oll because if you know what case will come after you solve the yellow cross OLL can still be kinda fast. But I still think you should try to learn a new oll every once in a while until you have an dedicated efficient alg for most f2l cases
@@jakejones5454 and what about lookahead?
Well, I average low 14 and think I am probably too slow to advise you on that. But, I personally think that look ahead is just something that sort of comes as you get faster. But, forcing yourself to look at pairs you are not solving while doing slow solves could help
@@jakejones5454 ok, thank you
learn full OLL. The longer you wait the longer your learning curve will be for recognition
Nice tips! Keep it going. 👍
Just as I was on your last f2l video ANOTHER one comes out lol
0:53
I sometimes do R2' F2 R2 because the pair will state in the same place, so it is easier to trace
That's faster than not tracking a pair, but not a good habit to do in the long run!
@@JPerm please do an unboxing review on yuxin blue 4x4
Video recommendation : Gan 356X vs Gan 356XS
Is the Gan XS your main now? Hope it is.
Osmict probably is, I don’t even know what’s new compared to the gan x
@@cookiecubing1235 Spring Compression. The diffenrce with moyu system is, the lower the spring goes, the stronger the spring(Gan) while moyu is, the higher it goes, the stronger the spring(Moyu)
And the GMS(Gan Magent System) has changed
The weight is lighter. About 68 grams
You should do a video on pll recognition. Because my solves are really good up to the point of pll recognition. I know all of my plls but it's hard to tell which one it is if their not lined up.
ruclips.net/video/_gIAQm_B170/видео.html
ruclips.net/video/sdz5EjWShCg/видео.html
@@blindleader42 thank you. I was thinking he probably made one but for pll recognition but I wasn't sure
Thanks for sharing your f2l with us
Thanx J perm a lot u help me a lot in Cubing
Jperm’s channel is my favorite, but only one thing about it bothers me. His logo is 2x2, when j perm on a 2x2 is the same as t perm, and 3x3 is his main. Other than that, happy thanksgiving to Jperm, along with everyone else reading this
Great video thanks for the tips
More like this please!
That’s definitely what I need after a harsh day of school
#JPERMto300k
It is our duty
I want a like .... Nothing special I just got sub 30 from his training without full oll... Thank u JPerm
I'd like another video with advanced finger tricks.These tricks are really awesome and save cube rotations and time.
Yeah I liked this video, thx for the help! Plz make more tip videos like this. Is the gan XS your main now?
Is your main cube now is the Gan 356 xs???
Hi J perm. How can I get my avg to about 20 to 25 secs? Right now I average around 30 to 35 secs and I use f2l, 2look oll and full pll. Please help
Plz make a cube collection vid
yay new j perm upload
For 5 th case if remaining 3 slots solve then take it in frontright side and move R' U2 flipthe edge and again move R' U R.
THATS ALL 😊
i needed exactly this, tysm
Tip no. 1 Just understand these moves
Tip no. 2 Only thinking increasing your speed when you are comfortable with all these moves
2:42 i prefer to use multislotting approach when i got case like this, you can do for example this : y' R' U' R D' R U R' F R' F' R D
Good idea! Ive tried that before but it was hard to think about, especially since sometimes the other pairs are in horrible positions. But maybe I'll give it a shot again!
@@JPerm it is most useful if you have last two pairs in a front, i got that scenario officially in final :D
i did something like R U' R' u' which solved edge of the other pair and move my last two unsolved pieces in a front right, amazing feeling even thought solve was 9 :D
@@matejgrohmann2736 Yeah I've had the feeling that only using multislotting when it's "really worth it" may not be the right approach, kind of like how you can't just learn 20 ZBLLs and expect to be any good with it. Maybe just finding more situations to multislot would make you faster at multislotting the easy cases too.
For 2:00 I just do a sledgehammer to pair them up
What’s better: speedcubeshop or thecubicle?
U helped me get a new pb yesterday 25 secs!
Thx j perm love ur videos
2:30, say this was the last pair, I would do R2 U2 F R2 F’ U2 R’ U R
Edit: 2:52 for the keyhole flip, you could also do the flipping alg from a big cube I guess that saves a rotation the way you did tho
Three is no rotation in big cube flipping algs
Keep them coming
Very helpful, thanks.
Bro u helped me a lot
We need to see MOAR!!!
Hey J perm i love your videos 😊 are you working on any Animations i love them 😁
I recommend making more such videos on F2L tricks. :-)
I don't have the patience to lern full OLL/PLL, so more tricks on F2L would speed me up... 2-look OLL/PLL is fast enough for 1-minute-cuber...
Lars Hanisch enter mom - “you can do it if you put your mind to it!”
@@cookiecubing1235 the problem is the missing time... and full OLL/PLL will save me only a few seconds. I will get back to it, when I'm sub-30... 😎
Ok now these seem worth a shot 🤔🤔🤔
No views, 453 likes, 7 dislikes, 150 comments
RUclips is being weird again
Great video too, thanks for the tips!
It's just a procedural thing from RUclips. It's explained somewhere.
J Perm is good at tutorial because his voice is so clear
Yes dylan we want to learn more
shoot my comp is in 6 days and you post it NOW!!!
RubixMaster good luck.
Yay, new video
Can you make the review on the dayan tengyun 2x2 plz??
thanks, it will be useful
I need some easy algorithms like this video 🤪🤪😱😱🙀🙀
Yes
Amazing 😍
1 dislike WHYYYY WHY DOES THAT PERSON HAVE NOTIFICATIONS
So true
A very dedicated hater😂
I think all channels on RUclips have a dislike bot for no reason
How can you tell?
It's really just his mom tho