UPDATE- Hey guys, thank you for watching this video...if this has helped you out in any way please SUBSCRIBE, press that LIKE BUTTON and leave a COMMENT. Please check out these links that may SOLVE YOUR NO START ISSUES. amzn.to/3tvM0jd amzn.to/3xUrWKX amzn.to/3uuLxiA amzn.to/3erjviy Analyze your car issues and ERROR codes and clear them with this Amazingly accurate yet inexpensive OBD2 SCANNER- amzn.to/33rovxg Wireless Scanner amzn.to/3nYbjtb Test your Battery and Alternator amzn.to/2QWtGCU If you would like to help this channel, your donations are appreciated. Cashapp- $PeterLCG Venmo- PeterLCG THANK YOU
Alright guys, what I did was remove the fuse that controls the computer for a few minutes. I also disconnected the battery positive and negative and left it unhooked for a few minutes. After that I hooked everything back up and I was able to start my car right up. The fuse box was in back of the dash compartment that is located to the left of the steering wheel, right underneath the dash dimmer button.
I have had the same problem if you can here the starter spinning which sounds like a low whine. The car thinks that it is still started (even after sitting for long periods of time) i think its some sort of defect with the auto start/stop on the car i had a computer hooked up and was confirmed this way it is a very simple fix which i can not remember or hand what the part was called but i will post as soon as i find what i used but if you are stuck out and need to get your car home i know for sure disconnect the battery for about 30 minutes and reconnect this will kill all power and stored power and the car will start. The part is connected to the air inflow on top of the engine and has one bolt no need to waste money on a mechanic
I know it's 1yr after you posted this but I just had the same problem. I disconnected the computer fuse and both terminals on the battery. Waited a few minutes and hooked everything back up and the car started normal. Fuse box is behind the dash compartment that is to the left of the steering wheel right underneath the dash dimmer.
Chevy 2010-2019 put key in driver door turn left and hold for 60 real seconds. Don’t take key out now turn the key right hold for 60 seconds and it’s just that simple. Could work on other models as well. This is something locksmiths do after cutting the key. It’s simple left 60sec, right 60sec without removing the key. U welcome guys.
UPDATE-
Hey guys, thank you for watching this video...if this has helped you out in any way please SUBSCRIBE, press that LIKE BUTTON and leave a COMMENT.
Please check out these links that may SOLVE YOUR NO START ISSUES.
amzn.to/3tvM0jd
amzn.to/3xUrWKX
amzn.to/3uuLxiA
amzn.to/3erjviy
Analyze your car issues and ERROR codes and clear them with this Amazingly accurate yet inexpensive OBD2
SCANNER- amzn.to/33rovxg
Wireless Scanner
amzn.to/3nYbjtb
Test your Battery and Alternator
amzn.to/2QWtGCU
If you would like to help this channel, your donations are appreciated.
Cashapp- $PeterLCG
Venmo- PeterLCG
THANK YOU
Alright guys, what I did was remove the fuse that controls the computer for a few minutes. I also disconnected the battery positive and negative and left it unhooked for a few minutes. After that I hooked everything back up and I was able to start my car right up. The fuse box was in back of the dash compartment that is located to the left of the steering wheel, right underneath the dash dimmer button.
Which number fuse?
You over explained with no resolution?? Waste of however many minutes of my life
Just horrible
Bruh you talk to much
I've fixed everything nown to man my Impala cranks no start how do I test for broken wires code 1682
Erase this video
I have had the same problem if you can here the starter spinning which sounds like a low whine. The car thinks that it is still started (even after sitting for long periods of time) i think its some sort of defect with the auto start/stop on the car i had a computer hooked up and was confirmed this way it is a very simple fix which i can not remember or hand what the part was called but i will post as soon as i find what i used but if you are stuck out and need to get your car home i know for sure disconnect the battery for about 30 minutes and reconnect this will kill all power and stored power and the car will start. The part is connected to the air inflow on top of the engine and has one bolt no need to waste money on a mechanic
Do you know what part you used to fix this issue? I am having the same problem.
do you know the part
Do you know the part. I have the same problem. Please reply to me and the other two below. Thanks.
Its your evap purge valve i just replaced mine its easy
I'm currently having that problem did you ever find out what the problem was?
I have the same problem, did you fix it?
I know it's 1yr after you posted this but I just had the same problem. I disconnected the computer fuse and both terminals on the battery. Waited a few minutes and hooked everything back up and the car started normal. Fuse box is behind the dash compartment that is to the left of the steering wheel right underneath the dash dimmer.
@@Dvldg07 what computer fuse you mean bro
@@773_lowkey3 let me get home so I can check which one it is and I'll let you know
@@Dvldg07i know it’s one year later but thank you buddy. this got the car started
Why talking so much
Maaaan ain't that the truth just get to the fkng point
Sounds like the starter or the alternators
I got a 2017 chevy impala i just replaced my evap purge valve your check engine is on thats what it is they have this problem from chevy
I'm going thru this exact problem. How much was the fix?
Too much BS..THE POINT...WE WANT TO FIX NOT HEARING A BARING TOOK..
Engine control module
Starter
99 mpg
Bruh com'on get to the point Damn
Brooooooooo, GD get to the point!!!!
Danm yu talk too much. Pls dont watch this video
Dude just got his oil changed his hood was up car wont start if the hood up
Yes it will my dude
Yes it will lol
Chevy 2010-2019 put key in driver door turn left and hold for 60 real seconds. Don’t take key out now turn the key right hold for 60 seconds and it’s just that simple. Could work on other models as well. This is something locksmiths do after cutting the key. It’s simple left 60sec, right 60sec without removing the key. U welcome guys.
What are you talking about?
@@ImpalaLfx can anybody confirm if this wroks
@@Jcbreezeakanupeshooter doesn't work. Lol. He's just a toddler watching and commenting😂
@@ImpalaLfx i
This is usually how manufacturers synchronize the immobilizer and key fob.