The best video I've found on this topic! Actually taking a pause and watching your video allowed enough time for the system to reset after I had changed out a dead battery. Thank you my friend! 🙏
Ok so I am sharing this info with anyone who has been having this problem with bypassing the anti-theft system in your GM cars, I have a 06 H3 and have been dealing with this BS for a while! My H3 recently has been back to acting stupid and none of these tips work, they sort of worked at one point but not anymore! Anyhow, I stumbled on this trick recently out of frustration! So if you go to start your car and it won't start, turn the key in the ignition back to off, place your foot on the gas pedal but don't press down, start your car normally and the second it begins to crank but won't start, just tap the gas pedal, just a quick tap! I have been doing this now every time it won't start and it cranks over every time so far! Hope this helps.
I just wanted to say thank you for this video I've struggled with this issue I've got an 07 Colorado and truth be told I struggled with it since a year after I bought the truck it is currently 2023 still going strong thank God you have no idea how much this is help me
thank you very much for this trick you saved my life, my truck didn't want to turn on for nothing I watched your video and it was the one that saved me. I was under the snow very cold and at night, this saved my life
Thank you for the video. I was able to start an old lady’s truck stuck at the gas pump just now. Her son who was going to have to drive an hour to help her also thanks you.
Thank you bro you're a big big help it is 11:22 at night and I'm trying to go and meet my wife your last method just worked for me I really appreciate you bro best of luck to you and your family
I have used the last one on my 2009 colorado twice. Have not had a failure. I have also lubricated and cleaned the keyhole. In retrospect, 15 or 20 minutes of cleaning may have been method 1 instead.
Nope no recall, and they are probably are never going to because it is an older model and it doesn’t endanger anyone like if it where air bags. But they definitely need to do something about it because I have gone to mechanic after mechanic and there is just nothing they can do.
Gm has a technical service bulletin for this. It causes a code B2960 code in the BCM. The fix is to replace the ignition switch assembly and do the 30 minute relearn process.
Friend you got me out of a bind. I was stuck at a gas station with a new battery and a full tank of gas at night and what do you know? It would not start. Saw your video and the last option worked for me. Thanks a bunch friend.
I dealt with this, And the first 2 worked for a while, I eventualy had the body control module reprogrammed and it has never happened since. Also stopped throwing a code for a faulty accelerator pedal position sensor.
The 10 Min is the "Wait Time" for the Pass Lock to Reset itself once you get the flashing lock --- whether you leave the key in the On Position or not, I don't think it matters (I take the key out now) --- be careful with the key in the On Position as the Headlights are On if in Auto Mode and this can run down your battery (that was my "Ah Ha" Moment one morning when it Pass Locked Multiple times on me -- I left key "On" several cycles and low battery -- battery had to sit for 15 mins to gain enuf starting charge to try again) --- so if you choose to just Wait -- it is a set 10 mins from time of flashing (you can set a timer) and then try again whether key is in ignition or not... It may fail again, which would mean ANOTHER 10 min wait... I have a 2007 and I have been having more frequent issues of late - will go check with my dealership to see how much it would be to replace the module -- or I will disable it manually if not reasonable to fix --- but that will be a last resort! I will continue to try the Door Open method but have not had any luck with it yet. :-) Love my 2007 Colorado!
This happens to my 05 colorado once or twice a year. My mechanic suggested next time locking the truck with the fob, then unlock the driver door with key and try starting it. I haven't tried that yet, but next time. It could be the ignition not recognizing the chip in the key (fluke), so waiting for the system to reset may be necessary.
Weirdest thing first time this has ever happened to me and my old five Chevy Colorado AKA diamond. Thank you very much the third time worked for me. I was kind of in a pain didn't have the first two options. Just wanted to say thank you for the video and now I know what to do if this ever happens again. To all the little truck owners out there. To all the little truck owners out there Keep On Truckin and have a grateful day.
On my 07 Colorado I would put it in neutral and that also works. Or I would disconnect the ground split connector from the passanger side and connected back again, that also works fine for me.
Mine's exactly 10 minutes on the way and then it usually cranks but he recently it's been doubling up I got to where I was going out and cranking it 10 minutes earlier and when it didn't crank it didn't put me behind and then it doubled up where I waited 10 and then waited another 10 and it would crank doesn't do it every time but sometimes and then this morning it was three times in a row have you had that problem and also while I was watching the video I decided to push the unlock button on my keypad which lit up my lights and then it crank right away have you tried that I'm going to start trying it to see if it was a fluke or not
Hello. I had such a problem. Chevy impala 2014 did not start intermittently. The ignition clicked, the anti-theft mode turned on. The problem was in attaching the battery ground wire to the car body. The nut was badly tightened from the factory! The connection got very hot and that was the problem. Look for it along the path of the ground wire from the battery.
I’m having this same problem but the passlock light is staying solid. I have a 5 speed manual so I can get it rolling and dump the clutch and get it going but then the passlock light stays on while driving. It’s always solid and never flashing, any ideas?
So weird my Chevy Uplander had the light solid said I needed the service the security system but mine fired up no problem and I couldn't figure out how to get that light off until your second solution
Just now have the passlock steady light on 2006 chevy cobalt LT after I replace the Starter, replaced the relay of Starter but nothing.. Its the first I ever experience. I never own a chevy and now Im am.
The theft deterrent system is armed and the engine will not start. To restore the system ,turn the ignition key to the lock position then to the on position,now press the lock or unlock door button on the driver's door,then turn on the ignition, the car should start.
The correct fix is to replace the ignition switch assembly according to GM’s Technical service bulletin. After replacing it you have to perform the 30 minute relearn process. Got a vehicle in my shop right now with this problem. His issue is after driving it and turning it off it won’t start. Has to wait 10 minutes to start it up. After 10 minutes on the dot that’s when the system resets itself and allows the vehicle to restart.
I just had this issue, “Theft Deterrent system”. I used my key fob and lock button on the door. What causes this issue? Is it to prevent someone from stealing your car.
I have a 2016 Camaro SS and I just programmed a new key fob as a 2nd key which works after programming it...but my anti thetf light is on but not blinking... the car does start but the light is on how can I remove the anti-theft dash light?
I've done everything on my 1998 chevy s10 nothing freaking works. It's been a year. I cant figure it out. The truck is fing useless. It throws the alarm code so it's the alarm. I'm so fed up.
Thank you! The second one worked great and it didn't take a whole 10mins for mine or maybe it did while trying to look for videos! Lol But it always happens at an inconvenient time
Very nice I had trouble like this beforehand vi unhook my battery it starts up but the light you talking about I waited 15 minutes came back the light went off still no start battery strong then says power reduced
I have the same problem. My is 2006 saturn.ion.the security light turn off after few second but my car I can't start the engine at all. .how can I get this problem fix . Would you help me
You 06 is over fourteen years old and has 122,506 MI. showing. I have seen them with well over 300K and the frame rusted out and is being sold for parts. Make sure you check your frame where the rear shackles are welded to the rear frame that seem to rot out badly for some reason,I covered mine after wire brushing the surface rust away and use miracle paint on them it is thicker than POR 15 and is like a super sealer so moisture cannot absorb into the frame.
What you have to do is open your door, close it, lock it with the key, unlock it with the key, and open the door and then try turning on the car. Works every time
My truck wont ding when the passlock is blinking 😂 cant do the third method. The best one for me it’s leaving the key “on” and wait it usually takes about 10 minutes.
Water got into my broken key fob and fried the chip. Car started to lock up, horn beeping and went into anti theft deterrent mode. Was stuck for 2 days. Called out a mobile locksmith who had the keys and fobs on hand and program on site. Took no more than an hour time. Car started right up no problem.
I have a 06 Monte Carlo and my key won’t turn all the way to the off position which killed the battery so now I went to start it and now doesn’t do anything I got the theft deterrent system to go off but still nothing even with my charging box plugged up to it any solutions?
Question. On my 2019 Chevy blazer, it's in theft Deterrent mode. I have a fob but no switch to turn the car on or off. It's push button. How can I get it out of theft Deterrent mode with no key insert
2008 Chev 2500 P/U. Tried all 3, only number 1 worked. I cut 2 aftermarket keys & this theft deterrent BS started. Then I cut 2 more GM keys & it still leaves me hanging about every 4 months. (Turning off & waiting for 15min is the only thing that resets my system.)
my Chevy Malibu 2010 wouldn't turn on because of the passlock light.Replaced the keys, still didn't work. I saw videos on how the key port could be the problem but the problem was actually the battery. It was low on amps it was marking like 12.04 (really low). Replaced the battery, and the car turns on just fine. When the battery goes out it starts lighting up random things
I got a 1999 Tahoe and it beeps and flashes front and back lights even with no key in and it won’t crank or no sound it was just running then it stopped
Check this new video out! This one is a follow up to the vid you are watching now!
ruclips.net/video/qP77FdqOZmA/видео.htmlsi=l3Hj5azXTv17383h
The best video I've found on this topic! Actually taking a pause and watching your video allowed enough time for the system to reset after I had changed out a dead battery. Thank you my friend! 🙏
This actually just helped me get out of my work parking lot when I had no other option, thank you so much!!!
You are beyond welcome!! Sooo glad I could help
THE THIRD OPTION WORKED! My truck randomly doesn’t start for over a year now. I opened my door and it started. HAHAHA
Ok so I am sharing this info with anyone who has been having this problem with bypassing the anti-theft system in your GM cars, I have a 06 H3 and have been dealing with this BS for a while! My H3 recently has been back to acting stupid and none of these tips work, they sort of worked at one point but not anymore! Anyhow, I stumbled on this trick recently out of frustration! So if you go to start your car and it won't start, turn the key in the ignition back to off, place your foot on the gas pedal but don't press down, start your car normally and the second it begins to crank but won't start, just tap the gas pedal, just a quick tap! I have been doing this now every time it won't start and it cranks over every time so far! Hope this helps.
The door open trick worked kept me from being stuck many miles from home you rock thank you for the information
LOVE IT!! I'm glad it helped! Thanks!!
I just wanted to say thank you for this video I've struggled with this issue I've got an 07 Colorado and truth be told I struggled with it since a year after I bought the truck it is currently 2023 still going strong thank God you have no idea how much this is help me
So glad to hear it!!! thanks for the comment
This worked!!! omg had this problem this morning... I found you this really work!!!
thank you very much for this trick you saved my life, my truck didn't want to turn on for nothing I watched your video and it was the one that saved me. I was under the snow very cold and at night, this saved my life
WOW!!! I'm so very happy this video helped and even more happy you are safe brother! Thanks for the comment!
Fantastic video, right to the point and easy to follow along! After trying the 2 way a couple
Times and failing, the 3rd way worked First try!
AWESOME!!! Thanks for the comment!!
Friend, you helped me, I was stuck until I saw your video, I was able to turn it on, thank you very much
You are very welcome!
Thank you for the video. I was able to start an old lady’s truck stuck at the gas pump just now. Her son who was going to have to drive an hour to help her also thanks you.
Thank you bro you're a big big help it is 11:22 at night and I'm trying to go and meet my wife your last method just worked for me I really appreciate you bro best of luck to you and your family
I have used the last one on my 2009 colorado twice. Have not had a failure. I have also lubricated and cleaned the keyhole. In retrospect, 15 or 20 minutes of cleaning may have been method 1 instead.
I can’t believe the last one just worked for me lol. Thank God for YT and creators like you that makes this kind of content 🙌🏾🙌🏾 4:02
Happy I could help! Thanks for the comment
Absolute magician KING!
Thanks for the comment!!!! 😃
Does GM have a recall about this or even care? This is a major issue…
Nope no recall, and they are probably are never going to because it is an older model and it doesn’t endanger anyone like if it where air bags. But they definitely need to do something about it because I have gone to mechanic after mechanic and there is just nothing they can do.
Yeah I see a lot of videos on cutting the security wire but… I reaaally don’t wanna do that
Nope. They suck
Gm has a technical service bulletin for this. It causes a code B2960 code in the BCM. The fix is to replace the ignition switch assembly and do the 30 minute relearn process.
The third one worked for me on the first try! You're the best!
Thank you , you saved me hundreds of dollars from buying a new starter, your trick #one started my truck . God Bless you
Thank you! My bfs Malibu was having this issue and the 2nd option worked immediately
Friend you got me out of a bind. I was stuck at a gas station with a new battery and a full tank of gas at night and what do you know? It would not start. Saw your video and the last option worked for me. Thanks a bunch friend.
Thank you, second option worked like a charm.
awesome!!!
I dealt with this, And the first 2 worked for a while, I eventualy had the body control module reprogrammed and it has never happened since. Also stopped throwing a code for a faulty accelerator pedal position sensor.
God bless you. The second option works. Took less than 5 min. But had to turn the switch 3 times from off position to start.
Thanks for the comment and the info!!! Glad I could assist
The 10 Min is the "Wait Time" for the Pass Lock to Reset itself once you get the flashing lock --- whether you leave the key in the On Position or not, I don't think it matters (I take the key out now) --- be careful with the key in the On Position as the Headlights are On if in Auto Mode and this can run down your battery (that was my "Ah Ha" Moment one morning when it Pass Locked Multiple times on me -- I left key "On" several cycles and low battery -- battery had to sit for 15 mins to gain enuf starting charge to try again) --- so if you choose to just Wait -- it is a set 10 mins from time of flashing (you can set a timer) and then try again whether key is in ignition or not... It may fail again, which would mean ANOTHER 10 min wait... I have a 2007 and I have been having more frequent issues of late - will go check with my dealership to see how much it would be to replace the module -- or I will disable it manually if not reasonable to fix --- but that will be a last resort! I will continue to try the Door Open method but have not had any luck with it yet. :-) Love my 2007 Colorado!
Sir you just saved my whole life 🙌🏾 🙏🏾 ❤️
SIR Its A MAM, MAM
Awesome! Glad I was able to help!
Sat in my truck didn’t start after trying 5 times I watch this video and after trying first method started instantly
Best video ever the 3rd one helped me instantly 🙏🏼🙏🏼
This happens to my 05 colorado once or twice a year. My mechanic suggested next time locking the truck with the fob, then unlock the driver door with key and try starting it. I haven't tried that yet, but next time. It could be the ignition not recognizing the chip in the key (fluke), so waiting for the system to reset may be necessary.
Weirdest thing first time this has ever happened to me and my old five Chevy Colorado AKA diamond. Thank you very much the third time worked for me. I was kind of in a pain didn't have the first two options. Just wanted to say thank you for the video and now I know what to do if this ever happens again. To all the little truck owners out there. To all the little truck owners out there Keep On Truckin and have a grateful day.
Had the same issue with mine. Replaced the ignition and it stopped doing it
On my 07 Colorado I would put it in neutral and that also works. Or I would disconnect the ground split connector from the passanger side and connected back again, that also works fine for me.
Genius men !!!😊genius !!!
Third one worked for me!! Thanks a bunch!!!
Bro you the G.O.A.T
Worked like a champ (option 1) and it didn't even take 10 minutes. Thanks and have a good one brotha. 👍🏾
I’ve had my ignition changed out 3 times. I’m kinda tired of dealt with this cause I’m late to work over it..
This happens to me and it’s annoying. I have to wait 10 minutes and sometimes it’s 115 in Phoenix az. Anyway to just remove it all together?
Glad it worked for everyone
I wish it did for my 2015 Malibu
Mines locked but it doesn’t flash. Can’t start it. It’s always solid.
Same here you figure out yours?
@@marlinlonghair7379 yes. I took the key part off cuz it was broken. It has to be attached to the rest of the fob.
Mine's exactly 10 minutes on the way and then it usually cranks but he recently it's been doubling up I got to where I was going out and cranking it 10 minutes earlier and when it didn't crank it didn't put me behind and then it doubled up where I waited 10 and then waited another 10 and it would crank doesn't do it every time but sometimes and then this morning it was three times in a row have you had that problem and also while I was watching the video I decided to push the unlock button on my keypad which lit up my lights and then it crank right away have you tried that I'm going to start trying it to see if it was a fluke or not
Mine to exactly 10 minutes and up to 3 try's 30 minutes is a long time need you need to be somewhere I have to leave it running a lot now
Hello. I had such a problem. Chevy impala 2014 did not start intermittently. The ignition clicked, the anti-theft mode turned on. The problem was in attaching the battery ground wire to the car body. The nut was badly tightened from the factory! The connection got very hot and that was the problem. Look for it along the path of the ground wire from the battery.
I’m having this same problem but the passlock light is staying solid. I have a 5 speed manual so I can get it rolling and dump the clutch and get it going but then the passlock light stays on while driving. It’s always solid and never flashing, any ideas?
My 2006 Chevy impala has the solid car with lock on it . Never flashing . How do I get it to start
So weird my Chevy Uplander had the light solid said I needed the service the security system but mine fired up no problem and I couldn't figure out how to get that light off until your second solution
This just started happening with my 2006 chevy equinox. Is there any way to permanently fix this?
Ong thanks I was stranded at a store mine worked with just leaving the key on the on position till turned solid
Glad I could help!!! thanks for watching and commenting!!
Just now have the passlock steady light on 2006 chevy cobalt LT after I replace the Starter, replaced the relay of Starter but nothing.. Its the first I ever experience. I never own a chevy and now Im am.
ThNks a Lot it worked the 3rd way!
The theft deterrent system is armed and the engine will not start.
To restore the system ,turn the ignition key to the lock position then to the on position,now press the lock or unlock door button on the driver's door,then turn on the ignition, the car should start.
thank you I got this on my school bus that I drive and was very concerned about it not starting at all
Do you know what would fix the issue thanks
The correct fix is to replace the ignition switch assembly according to GM’s Technical service bulletin. After replacing it you have to perform the 30 minute relearn process. Got a vehicle in my shop right now with this problem. His issue is after driving it and turning it off it won’t start. Has to wait 10 minutes to start it up. After 10 minutes on the dot that’s when the system resets itself and allows the vehicle to restart.
It helped me out but why does it show that light!? Like does anyone know what that's supposed to mean
I just had this issue, “Theft Deterrent system”. I used my key fob and lock button on the door. What causes this issue? Is it to prevent someone from stealing your car.
I have a 2016 Camaro SS and I just programmed a new key fob as a 2nd key which works after programming it...but my anti thetf light is on but not blinking... the car does start but the light is on how can I remove the anti-theft dash light?
Thank you. The third way worked the first time. Much appreciated.
Is there not a way to keep this happening in the first place?
I been trying to figure this out too I have an 09 colorado
@@s.s.5936 don’t buy a chevy
I have the same issue. What is the cause and what do i need to replace to solve this issue. Thank you
Did you figure it out.
I've done everything on my 1998 chevy s10 nothing freaking works. It's been a year. I cant figure it out. The truck is fing useless. It throws the alarm code so it's the alarm. I'm so fed up.
The third option works so well thank you so much you're an angel💪🏿😊😊😊😊
This worked, thank you.
Thank you! The second one worked great and it didn't take a whole 10mins for mine or maybe it did while trying to look for videos! Lol
But it always happens at an inconvenient time
Literally me right now
Me rn
@@adamc5555 I hope it works
Thank you very much! The second option worked for me
Very nice I had trouble like this beforehand vi unhook my battery it starts up but the light you talking about I waited 15 minutes came back the light went off still no start battery strong then says power reduced
Any ideas on a Chevy equinox 2011? I’m having no luck
Did you ever figure it out
I have the same problem. My is 2006 saturn.ion.the security light turn off after few second but my car I can't start the engine at all. .how can I get this problem fix . Would you help me
You 06 is over fourteen years old and has 122,506 MI. showing. I have seen them with well over 300K and the frame rusted out and is being sold for parts. Make sure you check your frame where the rear shackles are welded to the rear frame that seem to rot out badly for some reason,I covered mine after wire brushing the surface rust away and use miracle paint on them it is thicker than POR 15 and is like a super sealer so moisture cannot absorb into the frame.
U make no sense
@@nosheenzaidi4834 The Frame Has weak spots that have to be sealed to prevent corrosion, like the drugs you take have rotted your pea brain.
Learn how to understand son if u can’t then wtf smh
Nice I have 289,170
Ive got 2009 Chevy cobalt it just started doing this ,it starts after leaving it few minutes ,
What you have to do is open your door, close it, lock it with the key, unlock it with the key, and open the door and then try turning on the car. Works every time
Doesn’t work
YOU ARE A GENIUS
What if it not flashing ? Does that mean i have another problem on my hands ?
saved me thanks, stupid issue. anyone know how to prevent?
My truck wont ding when the passlock is blinking 😂 cant do the third method. The best one for me it’s leaving the key “on” and wait it usually takes about 10 minutes.
Water got into my broken key fob and fried the chip. Car started to lock up, horn beeping and went into anti theft deterrent mode. Was stuck for 2 days. Called out a mobile locksmith who had the keys and fobs on hand and program on site. Took no more than an hour time. Car started right up no problem.
Does it usually make a clicking noise like battery's dead ?
Mine sounds like it tries to start but will not
Second option worked perfectly for our GMC canyon 2011✨
I have a 06 Monte Carlo and my key won’t turn all the way to the off position which killed the battery so now I went to start it and now doesn’t do anything I got the theft deterrent system to go off but still nothing even with my charging box plugged up to it any solutions?
I’m having the same issue
Question. On my 2019 Chevy blazer, it's in theft Deterrent mode. I have a fob but no switch to turn the car on or off. It's push button. How can I get it out of theft Deterrent mode with no key insert
Also my battery is dead. I tried charging it but it keeps saying theft Deterrent
@@michaelwhitfield609 if its push buttom should be able to tap the start button once without depressing the brake, same as turning key to on position.
Will this work for ford b2103 code
Life saver!!! Thank you, do you know what causes that so I can fix it? Maybe a bad starter?
It’s just called the pass-lock. Go to a mechanic and have it tuned out. It’s an absolute pain.
Method 3 seems to work pretty good.. But now the question is why.
I had that sign but I was driving on a free way. I didn’t understand why that light was on while I was driving
You are a legend sir!
Thanks.
How it can be fixed?
Thanks it helped me 9:09pm
Thank you sir you're a lifesaver I owe you a nice cold beer
2008 Chev 2500 P/U. Tried all 3, only number 1 worked. I cut 2 aftermarket keys & this theft deterrent BS started. Then I cut 2 more GM keys & it still leaves me hanging about every 4 months. (Turning off & waiting for 15min is the only thing that resets my system.)
my Chevy Malibu 2010 wouldn't turn on because of the passlock light.Replaced the keys, still didn't work. I saw videos on how the key port could be the problem but the problem was actually the battery. It was low on amps it was marking like 12.04 (really low). Replaced the battery, and the car turns on just fine. When the battery goes out it starts lighting up random things
What if the passlock light is on and not flashing?
10 minutes that is insane would want it to start right away not 10 minutes after
Happened to me today. I didnt know what to do, so I disconnected the battery, waited about 10 min.and reconnect battery. Truck started!
how about ford ranger?
But what is the real reason as to why it does it
You are my hero thank you so much
My security light wouldn't stop blinking and nothing worked I tried all 3 steps
I have a 2002 Chevy Impala
Anyone figured out the permanent solution for this ?
Sell the crap and buy a Ford
Hey I have a question, do you know why my 2007 Colorado has no chime at all?? Like my turn signal or my door chime does not work.
I got this issue too. It’s because the car has aftermarket radio . The chimes only works with the oem radio
..thats curious???
Though the vehicle starts, we are still puzzled over why this problem exists.
I got a 1999 Tahoe and it beeps and flashes front and back lights even with no key in and it won’t crank or no sound it was just running then it stopped
It’s the pass key lockout. Exactly 10 minutes wait.
correct , doesnt matter if you leave the key in or not. 10 mins 0 seconds it will reset.