As a former gunsmith the cz rear sight is probably the easiest I have ever encountered to remove. Small leaf spring underneath. Push down on top of the sight and pull rearward. Hope this helps.
Yes, but you still have part of the rear sight on there that's really in the way. I mounted a Leupold freedom scope (for .22) and I still couldn't get it to mount. The front objective is 40mm. I had to put on a EGW picitinny rail.
Hi who tee I've got the same one to remove the back sight is easy to remove u don't need any tools u just have to press down on the front end and at the same time slid it back toward the chamber its a recessed spring release . love your vids
The rear sight will come off. Put the rifle on a fitm surface, push down HARD on the front of the sight until you feel the leaf spring compress and pull to the rear. The sight will come out exposing two screws that hold the rear sight base on the rifle. It only takes one broken thumbnail and a few cuss words but it works!
Try pressing the back sight down and slide it off like its done with CZ 452. It doesn't look unlike the earlier model, at least in the video. Good luck.
picked one up eBay was only 11-12 bucks, without any adapter on the tail its a perfect fit to .177 BB/pellet bore too. sighted in at 30 yards, good enough!
Adam the rear sight is super easy to take off, no tools required, it's just a spring loaded undercut press down with your thump whilst pushing towards the stock, I work on these heaps for client custom builds.
@@WHOTEEWHO would have been interesting to see what velocity you got from that cz 22lr , for memory i think their got a 24 and something inch barrel ??
@@shanegibb997 yup, a lot like my old Remington 510 (TargetMaster). you lose a little velocity in favor of stability with the extra length+twist. its not a drastic loss, maybe 50-75 fps but who cares when you're hitting about anything you point at
WTW !!! WAY TO START A GREAT WEEKEND!! OATMEAL AND WTW !!! IVE NEVER THOUGHT OF LOOKING UP THE CZ 457, IVE HEARD CZ MADE A TRAINING RIFLE FOR THE STANDARD CZ RIFLE ? LOOKS LIKE ITS A TACK DRIVER ? NOTHING LIKE A .22 , ESPECIALLY WITH AMMO SHORTAGE WERE IN.. HOPEFULLY EVERYBODY WATCHING IS ABLE TO GET OUT AND THROW A LITTLE LEAD DOWNRANGE THIS WEEKEND ? GOD BLESS !!!
I own the Varmint, my wife has the American. They are really nice, accurate rifles. You would be doing yourself a favor if you could get your hands on one.
@@WHOTEEWHO if you want to remove the rear sight just push down on the part with the distance markings,push it down and towards the rear of the rifle and it'll pop right out then two flat head screws to remove the base. Then you can lower the scope to get better cheek weld. Hope that helps you out.
I have a 457 lux and a 455 heavy barrel, they both shoot in the same hole at 100 yards with CCI Standard velocity. You will never get rid of that rifle. It’s crazy that a CZ 22 LR is the most accurate gun I own at 100 yards. CZ Big thumbs up, Someone may be curious I think 457 lux is ever so slightly more accurate.
@@FT86TT I've had a CZ 455 "Ultralux" with the 28.68 inch barrel for a few years now and I love it. It's as incredibly accurate as any of the other CZ rimfire versions I have, from 452 to 455's and 457's. The barrel length doesn't really make it MORE accurate, but it sure isn't less so by any means. What it does do and where it really shines is in two areas. First, the barrel length gives you an extremely long sight radius between the front and rear sights which makes it a great rifle to shoot with just the open sights. I put a scope on it when i first got it, but took it off after a while and have left it off. The second and coolest way it shines is with "subsonic" ammo. The barrel length makes it darned near as quiet as a rifle with a silencer/moderator on it. It's much quieter with all types of .22lr ammo, but super quiet with subsonic. You definitely hear a difference. The varmints, they don't hear a thing. I like the changes made for the new 457's. Except for some of the stocks. I think the "Jaguar" stock is particularly hideous. My 455 has an amazing looking Walnut stock. The new Jaguars come with a fugly Beech wood stock with terrible machine pressed markings on the grip area and on the fore end. I'm looking at the possibility of just getting a nice walnut 457 Lux stock and swapping it out with the fugly Beech Jaguar version. Cool name. Fugly stock. Until then, I'm keeping my 455 Ultralux.
I’ve always wanted one of the CZ bolt guns and I finally ended up getting one a few weeks ago. I’ve always wanted an ultra lux model, and finally when shopping with my buddy to get him a new 308, I saw one for the first time in person. A CZ457 Jaguar which is the successor to the ultra lux model name. It’s got a 28.5” barrel which is perfect because I love peep sights. Only pain is that the bolt redesign makes half the rear sights I’d use incompatible/too wide because of how the bolt comes up beside the rear rail. Still amazing bolt action .22s. The 28.5” barrel also does what I wanted it for and makes CCI quiets basically a click and a thump of it hitting the target. Also pull that puppy out of the stock and you can adjust the trigger to be so perfect that it’s not funny. One screw to take the pre travel out or add more, one to reduce or add weight and one to reduce travel after the trigger pull. I removed all but .5mm of pre travel and lightened the pull. So much easier to shoot good with, only problem is I’m a bit nervous about a trigger with no pre travel and a 1-3lb? Pull. Not unsafe, just really easy to set off. That’s what trigger discipline is for though 🤷♂️
The rear sight leaf is super simple to remove if you know how. The pin does not come out. Just push down on the front of the sight at the "pin" and slide the sight rearward. I you need more clearance, I think you can remove the sight base (bottom part). On the 457 series, I believe the base is attached to the barrel with screws and can be completely removed. Awesome rifles. That Norma Tac-22 was shooting quite good. Ya gotta love those CZ rimfires!
Push down on the rear sight where it looks like a pin is going threw and slide in out backwards , what looks like pins are ears on the rear sight compress the sping and slide out backwards.
Never got to shoot one yet, they look good and sound good. Just another pc that may come to me later with hard work. Gods speed to ya Who and family. 👍🇺🇸
back in the day in NZ the BRNO was always the pro shooters choice for both accuracy and reliability. its not unusual on rabbits to go through 500 rounds in a day sometimes 1000.
Guy at Buds in Lexington was able to pop the rear sight off for my crossfire 2 install on med warne rings. Took him a while but there was a way of doing it.
I have the CZ 452 Ultra Lux .22LR Oh my I have never had such an accurate .22 in my hands till this CZ was in them. I can hold a consistant 50 cent piece group at 100 yards all day. Find out which ammo shoots the best. Blazer and Armscore works for mine
Been unable to get on the lives lately😩. Love the CZ's. You could see your group change with that bit of wind change! Love the outro!!! Whoooooooo teeeeeeeee whooooooooo!
Hi Adam. I know I'm a year late to this party and someone has probably already explained or even shown you how to remove that rear sight. It easy and no tools required. There's a little leaf spring under the front of that tangent sight. Just press down on top of the front of it with one hand and pull it rearward from the back with your other hand. Easy-peasy. Thanks for all the interesting, entertaining and informative vids. Please keep them coming. BTW... How about doing a video on the 9.3X62 Mauser caliber? I'd really like to see that. It's one of the most underrated calibers out there. At least, here in North America it is. Think .35 Whelen on steroids! Ballistics wise, it falls somewhere in between a .35 Whelen and a .375 H&H. Try it, you'll like it. I prefer using either 250grn Nosler Accubonds or Norma ammo loaded with .286grn A-Frames. You can also find it in cheaper brands like PPU and Sellier & Bellot. I think Norma also loads it with 232grn Oryx bullets as well which I've heard are very good but unfortunately have not had a chance to try. I have a Sako M85 Classic and Ruger No.1 both in 9.3X62. Love them. I live in B.C. Canada. This year I'm going to use my Sako on my Moose hunt and possibly for a Mule Deer as well if i get that lucky. 286grn Norma A-Frames for the Moose. 250grn Nosler's for the Muley. One day, I plan on using that single shot Ruger for a Bison hunt. I've not used 9.3X62 for a hunt before, but I hear that they don't leave alot of bloodshot ruined meat behind like alot of hyper velocity calibers do. I'll leave the .300WM behind this year. 7mm-08, .308 and 9.3X62 only for this year's hunting. You can find rifle brands in 9.3X62 from Ruger M77 (and No.1 but those are rare), Sauer, Tikka, Sako, Blazer, Mauser. But those last two are hella expensive brands. I suggest a Sauer XT 100. They cost about the same as a Ruger Hawkeye. At least, they do in this neck o' de woods. But they have excellent barrels, excellent triggers and fantastic accuracy. Especially for the price. I had one in .308 a few years ago. It was incredibly accurate. Perhaps Heavy Metal can get one in for you to borrow for a video.
I love the outro WTW! Awesome video again brother! Getting better and better and I didn’t think that was possible! Keep up the great work brother! Have an outstanding weekend!🤘🏽🍻🇺🇸👊🏽
Hey bud, hope you and the family are good. All ways working at 9 here when who comes on. That’s the time the man I take care of wants to be helped to bed and his nightly stuff finished. Saw you said hello just now watching it and reading the chat. Have a good weekend and gods speed to you and yours. 🙏🏻
I have the CZ 452 LR Ultra Lux. I can group a 50 cent piece all day long at 100 yards. Try different ammo and find what it likes and shoot only that and you will love this Plinker when you age to 90. I have never seen such accuracy in a .22 long rifle till the CZ was in my hands
I have the same rifle only in the older 452 model. This is my 2nd one n foolishly sold my 1st in the 90’s. Superb accuracy with 36 n 38gr ammo. However I use a 2-7x28mm Leupold n it has accounted for dozens of spruce hens n hundreds of gophers here in western Canada. The shorter compact scope does not touch the elevator rear sight. Which itself is very accurate with practice.
To remove the rear sight from the barrel you simply push down on the center of the forward most part of the sight and slide it out of a groove to the rear. It is spring loaded. No need to buy higher rings for iron sight clearance.
Well now that was an interesting video and that CZ 22 bolt-action rifle is a accurate platform for sure. I have never shot any of that Norma ammo and I haven't even seen any of it for sale around here but I would like to try it sometime. Anytime you can get a 22 LR to group that tight at 100 yards you know you've got a winning combination.
Rear sight removal , slide "slide" back on the sight than push down above where is 200 in between ears where you see "pin" , depressing front while pulling back and it just slide out. Yes that easy ;-DDD
I took rear sight off of mine. You just have to lift up slightly and push with thumb as you line the pins up with grove. Kind of like an AK rear sight leaf. I havent had chance to take it to range yet. I just picked up the ruger precision rimfire. I think I am going to like it better. It has all the attributes on stock I am looking for. Plus if the accuracy needs help green mountain is making them.
Hello and thanks a lot for this practical video. I would like to buy a CZ 457 22WMR, but I need to know about the material which its bolt made from. It seems to me that back side of the bolt is made from plastic. Am I right? Generally, is there any plastic part exist in these models?
My 17HMR and my 22LR are my current favorite guns to shoot...probably has something to do with cheaper ammo prices, but they are still my current faves nonetheless😂
Those cz are beautiful rifles as well as set up right. My friend has one and after you set that trigger a feather would fire it. Awesome video Who-Tee-Who the wooden stock on his rifle is beautifully done as well, snug bolt. A truly very well made rifle!
To remove the rear sight from a CZ, press down on the rear sight and slide rearward. The base can be removed as well, as it is attached via screws on the 457, rather than welds with the older CZ rimfires.
Well, I am impressed! Every range day begins for me with a Ruger American rimfire at 100 yds. It has taken me considerably longer to learn how to shoot it than anticipated(.22lr is different from 6.5 Grendel), but my groups are nowhere close to yours.
@@WHOTEEWHO, acquiring ammo has been a problem. To date, I have five types and five magazines one for each target. Yes I keep the targets with documentation on each. One of these days I may actually upload a video. After at least five more ammo types.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![CZ 457 Varmint [Bull Barrel] in 22Mag - First Shots and Sighting In](/img/1.gif)
As a former gunsmith the cz rear sight is probably the easiest I have ever encountered to remove. Small leaf spring underneath. Push down on top of the sight and pull rearward. Hope this helps.
Yes, but you still have part of the rear sight on there that's really in the way. I mounted a Leupold freedom scope (for .22) and I still couldn't get it to mount. The front objective is 40mm. I had to put on a EGW picitinny rail.
Hi who tee I've got the same one to remove the back sight is easy to remove u don't need any tools u just have to press down on the front end and at the same time slid it back toward the chamber its a recessed spring release . love your vids
Thanks Vince!!!!
@@WHOTEEWHO lol I literally just typed this
Only in poligon is possible to shot!! Broibited in normal country
You can get part of the rear sight off that way.
The rear sight will come off. Put the rifle on a fitm surface, push down HARD on the front of the sight until you feel the leaf spring compress and pull to the rear. The sight will come out exposing two screws that hold the rear sight base on the rifle. It only takes one broken thumbnail and a few cuss words but it works!
Try pressing the back sight down and slide it off like its done with CZ 452. It doesn't look unlike the earlier model, at least in the video. Good luck.
That laser is slick😎...this is going to be a really fun video! Have a good weekend everybody.
You too Sean!
picked one up eBay was only 11-12 bucks, without any adapter on the tail its a perfect fit to .177 BB/pellet bore too. sighted in at 30 yards, good enough!
Adam the rear sight is super easy to take off, no tools required, it's just a spring loaded undercut press down with your thump whilst pushing towards the stock, I work on these heaps for client custom builds.
One of my best rifles is my CZ 455 22 Magnum , very accurate rifle.
Gotta love CZ
@@WHOTEEWHO would have been interesting to see what velocity you got from that cz 22lr , for memory i think their got a 24 and something inch barrel ??
@@shanegibb997 yup, a lot like my old Remington 510 (TargetMaster).
you lose a little velocity in favor of stability with the extra length+twist.
its not a drastic loss, maybe 50-75 fps but who cares when you're hitting about anything you point at
I love my CZ 457 .22lr...👍👍
CZ’s are definitely hard to beat!
Absolutely agree Bruce
WTW !!! WAY TO START A GREAT WEEKEND!! OATMEAL AND WTW !!! IVE NEVER THOUGHT OF LOOKING UP THE CZ 457, IVE HEARD CZ MADE A TRAINING RIFLE FOR THE STANDARD CZ RIFLE ? LOOKS LIKE ITS A TACK DRIVER ? NOTHING LIKE A .22 , ESPECIALLY WITH AMMO SHORTAGE WERE IN.. HOPEFULLY EVERYBODY WATCHING IS ABLE TO GET OUT AND THROW A LITTLE LEAD DOWNRANGE THIS WEEKEND ? GOD BLESS !!!
I usually just look down the bore and set the scope with that. I only use the laser when it is to much trouble or not possible to look down the bore.
laser pointer where the bolt goes, through the bore is nice too if there's room.
they're making cartridges like that nowadays.
I love CZ products. Great shooting!
I love it too!
its like Husquvarna, from motorcycles to sewing machines, all good.
surprised Yamaha doesn't produce some firearms, if they do never heard of em.
Nothing better than some 22 action!!
Hey Deron!
One of my bucket list 22's.
I own the Varmint, my wife has the American. They are really nice, accurate rifles.
You would be doing yourself a favor if you could get your hands on one.
Kygunco has some and sportsmans guide currently and they both have layaway programs... don't tell anyone
if you see an old Remington 510-512-513 reasonably priced don't even blink.
"shut up and take my money!"
That CZ makes you look good 😂😂😂
Thanks for watching Raptor
@@WHOTEEWHO if you want to remove the rear sight just push down on the part with the distance markings,push it down and towards the rear of the rifle and it'll pop right out then two flat head screws to remove the base. Then you can lower the scope to get better cheek weld. Hope that helps you out.
That was a very good tutorial on siting in 😊and the CZ457 trainer looks cool the fact it has Iron sites is big +
I have a 457 lux and a 455 heavy barrel, they both shoot in the same hole at 100 yards with CCI Standard velocity. You will never get rid of that rifle. It’s crazy that a CZ 22 LR is the most accurate gun I own at 100 yards. CZ Big thumbs up, Someone may be curious I think 457 lux is ever so slightly more accurate.
Awesome
same for the Remington I've had near 50 years since I was 11.
still a little tack driver
Does the 28 inch barrel tends to be more accurate?
@@FT86TT I've had a CZ 455 "Ultralux" with the 28.68 inch barrel for a few years now and I love it. It's as incredibly accurate as any of the other CZ rimfire versions I have, from 452 to 455's and 457's.
The barrel length doesn't really make it MORE accurate, but it sure isn't less so by any means. What it does do and where it really shines is in two areas. First, the barrel length gives you an extremely long sight radius between the front and rear sights which makes it a great rifle to shoot with just the open sights. I put a scope on it when i first got it, but took it off after a while and have left it off. The second and coolest way it shines is with "subsonic" ammo.
The barrel length makes it darned near as quiet as a rifle with a silencer/moderator on it. It's much quieter with all types of .22lr ammo, but super quiet with subsonic. You definitely hear a difference. The varmints, they don't hear a thing.
I like the changes made for the new 457's. Except for some of the stocks. I think the "Jaguar" stock is particularly hideous. My 455 has an amazing looking Walnut stock. The new Jaguars come with a fugly Beech wood stock with terrible machine pressed markings on the grip area and on the fore end.
I'm looking at the possibility of just getting a nice walnut 457 Lux stock and swapping it out with the fugly Beech Jaguar version.
Cool name.
Fugly stock.
Until then, I'm keeping my 455 Ultralux.
@@jasonforester4572 Wow, thank you for the detailed info! I don't remember the last time I've gotten such a detailed reply back! Thanks 🙏
This is just the best YT dude on the internet, giving us daily content.
🙏🙏🙏 appreciate you watching bigtime
I’ve always wanted one of the CZ bolt guns and I finally ended up getting one a few weeks ago.
I’ve always wanted an ultra lux model, and finally when shopping with my buddy to get him a new 308, I saw one for the first time in person.
A CZ457 Jaguar which is the successor to the ultra lux model name. It’s got a 28.5” barrel which is perfect because I love peep sights.
Only pain is that the bolt redesign makes half the rear sights I’d use incompatible/too wide because of how the bolt comes up beside the rear rail.
Still amazing bolt action .22s. The 28.5” barrel also does what I wanted it for and makes CCI quiets basically a click and a thump of it hitting the target.
Also pull that puppy out of the stock and you can adjust the trigger to be so perfect that it’s not funny. One screw to take the pre travel out or add more, one to reduce or add weight and one to reduce travel after the trigger pull.
I removed all but .5mm of pre travel and lightened the pull. So much easier to shoot good with, only problem is I’m a bit nervous about a trigger with no pre travel and a 1-3lb? Pull. Not unsafe, just really easy to set off. That’s what trigger discipline is for though 🤷♂️
I have a model 455 and the rear sight came right off. I have the standard cz mount with a Nikon 3-9 scope. Love me CZ`S!
The rear sight leaf is super simple to remove if you know how. The pin does not come out. Just push down on the front of the sight at the "pin" and slide the sight rearward. I you need more clearance, I think you can remove the sight base (bottom part). On the 457 series, I believe the base is attached to the barrel with screws and can be completely removed. Awesome rifles. That Norma Tac-22 was shooting quite good. Ya gotta love those CZ rimfires!
Man you can really see the groups open up (relatively speaking) when those wind gusts came through
Love CZ. I've had a couple over the years. Great rifle. Looks like fun too! 😎
Thanks for watching Mark
Push down on the rear sight where it looks like a pin is going threw and slide in out backwards , what looks like pins are ears on the rear sight compress the sping and slide out backwards.
Never got to shoot one yet, they look good and sound good. Just another pc that may come to me later with hard work. Gods speed to ya Who and family. 👍🇺🇸
Hey Joel 👋
@@randyadams03 hello sir, have a good weekend. Thanks for the howdy, all ways an honor to hear from you. 👍🙏🏻
@@joelmcmahan7386 got some things going to Heavy and WTW hope will be ok. Grandson, family 👪 good weekend 😎
How dare wife want dinner on Friday evening and I miss live WTW video !!!
That model is designed to be shot with open sights. That is why the comb of the stock is shaped the way it is. Read the CZ website.
Pretty serious accuracy for a 22 LR at 100 yards. Good job.
they should all be like that, my 510 is 75 years old and still does it!
My laser site was delivered yesterday. Thanks cheap and nails!!!
Awesome!
That is a ridiculously good group for a 22 @100. You should pick yourself up a cz75 pistol. Their excellent
There is two screws that hold that rear sight on. I took mine off and put a 25 moa rail on for the scope
With the Rear sight , try to push down on top and slide it back
back in the day in NZ the BRNO was always the pro shooters choice for both accuracy and reliability.
its not unusual on rabbits to go through 500 rounds in a day sometimes 1000.
Guy at Buds in Lexington was able to pop the rear sight off for my crossfire 2 install on med warne rings. Took him a while but there was a way of doing it.
WHO_TEE_WHO loves the zooms and the clickys!
Absolutely
You gave me an idea of doing my old .22 for a scope and 100 yards. My son and I did that with his .22 and a new scope and it is very accurate.
I have the CZ 452 Ultra Lux .22LR Oh my I have never had such an accurate .22 in my hands till this CZ was in them. I can hold a consistant 50 cent piece group at 100 yards all day. Find out which ammo shoots the best. Blazer and Armscore works for mine
Found blazer works well, but the best I found was Eley Match.
Been unable to get on the lives lately😩. Love the CZ's. You could see your group change with that bit of wind change! Love the outro!!! Whoooooooo teeeeeeeee whooooooooo!
CZ 457 Varmint, nice scope on top and that's all I need :) looks cool, shoots like a champ
Hi Adam. I know I'm a year late to this party and someone has probably already explained or even shown you how to remove that rear sight.
It easy and no tools required.
There's a little leaf spring under the front of that tangent sight. Just press down on top of the front of it with one hand and pull it rearward from the back with your other hand.
Easy-peasy.
Thanks for all the interesting, entertaining and informative vids. Please keep them coming.
BTW... How about doing a video on the 9.3X62 Mauser caliber? I'd really like to see that. It's one of the most underrated calibers out there. At least, here in North America it is. Think .35 Whelen on steroids!
Ballistics wise, it falls somewhere in between a .35 Whelen and a .375 H&H. Try it, you'll like it. I prefer using either 250grn Nosler Accubonds or Norma ammo loaded with .286grn A-Frames.
You can also find it in cheaper brands like PPU and Sellier & Bellot.
I think Norma also loads it with 232grn Oryx bullets as well which I've heard are very good but unfortunately have not had a chance to try. I have a Sako M85 Classic and Ruger No.1 both in 9.3X62. Love them. I live in B.C. Canada. This year I'm going to use my Sako on my Moose hunt and possibly for a Mule Deer as well if i get that lucky.
286grn Norma A-Frames for the Moose. 250grn Nosler's for the Muley. One day, I plan on using that single shot Ruger for a Bison hunt.
I've not used 9.3X62 for a hunt before, but I hear that they don't leave alot of bloodshot ruined meat behind like alot of hyper velocity calibers do. I'll leave the .300WM behind this year.
7mm-08, .308 and 9.3X62 only for this year's hunting.
You can find rifle brands in 9.3X62 from Ruger M77 (and No.1 but those are rare), Sauer, Tikka, Sako, Blazer, Mauser. But those last two are hella expensive brands.
I suggest a Sauer XT 100. They cost about the same as a Ruger Hawkeye. At least, they do in this neck o' de woods. But they have excellent barrels, excellent triggers and fantastic accuracy. Especially for the price. I had one in .308 a few years ago. It was incredibly accurate.
Perhaps Heavy Metal can get one in for you to borrow for a video.
I love the outro WTW! Awesome video again brother! Getting better and better and I didn’t think that was possible! Keep up the great work brother! Have an outstanding weekend!🤘🏽🍻🇺🇸👊🏽
Hey bud, hope you and the family are good. All ways working at 9 here when who comes on. That’s the time the man I take care of wants to be helped to bed and his nightly stuff finished. Saw you said hello just now watching it and reading the chat. Have a good weekend and gods speed to you and yours. 🙏🏻
I understand how work goes and it’s very demanding. Have an outstanding weekend brother and Gods speed to you and yours as well. 🤘🏽
I have the CZ 452 LR Ultra Lux. I can group a 50 cent piece all day long at 100 yards. Try different ammo and find what it likes and shoot only that and you will love this Plinker when you age to 90. I have never seen such accuracy in a .22 long rifle till the CZ was in my hands
Very nice!
I have the same rifle only in the older 452 model. This is my 2nd one n foolishly sold my 1st in the 90’s. Superb accuracy with 36 n 38gr ammo. However I use a 2-7x28mm Leupold n it has accounted for dozens of spruce hens n hundreds of gophers here in western Canada. The shorter compact scope does not touch the elevator rear sight. Which itself is very accurate with practice.
Thanks for watching Larry
I have the old model 2. Absolutely love it.
I was eyeballing one at my local dealer today.
If there is no pin holding the sight ladder to the mount you should be able to compress it down at the pivot point and slide it to the rear.
Thanks!
Never owned a CZ rifle with that being said now after seeing the Last few videos I'm interested in getting one. Thanks WTW!!
Thanks for watching Ron!
Nice looking piece
the 452 rear sight you simply depress hard at the front of the leaf and slide back towards to rear. you do have to push down hard.
To remove the rear sight from the barrel you simply push down on the center of the forward most part of the sight and slide it out of a groove to the rear. It is spring loaded. No need to buy higher rings for iron sight clearance.
Daggumit. Thank you
Well now that was an interesting video and that CZ 22 bolt-action rifle is a accurate platform for sure. I have never shot any of that Norma ammo and I haven't even seen any of it for sale around here but I would like to try it sometime. Anytime you can get a 22 LR to group that tight at 100 yards you know you've got a winning combination.
I love it!
Love the video and closing theme song, keep up the good work!!!...
Appreciate you watching!
Norma the good stuff but im Still waiting for bulk 22 in my parts.
Me too
Thanks for the video. I have seen many videos with the CZ 457 and it seems to be a great shooter. Just like this one is. Thanks again.
Good shooting and good video it looked like the wind affected your last 2 groups👍👍👍👍
that and a little bit pull happy both, been there!
Good Video Who Tee, I always love the 22 stuff
Thanks for watching Jim!
That’s a beautiful 22lr rifle!!!
I love it
Could you use your iron sights with that picatinny rail without the scope?
Yes
Love the CZ’s. Best bang for ur buck!!! 💯‼️
Rear sight removal , slide "slide" back on the sight than push down above where is 200 in between ears where you see "pin" , depressing front while pulling back and it just slide out. Yes that easy ;-DDD
Don't take the ironsights off, adapt the optics to fit. That is what I did with my Ruger 10/22.
Nice shooting there dead eye! Love that outro song!!👍🏻🇺🇸
Thanks for watching steve!
I took rear sight off of mine. You just have to lift up slightly and push with thumb as you line the pins up with grove. Kind of like an AK rear sight leaf. I havent had chance to take it to range yet. I just picked up the ruger precision rimfire. I think I am going to like it better. It has all the attributes on stock I am looking for. Plus if the accuracy needs help green mountain is making them.
I need to try that. For the life of me I couldn't figure it out
Love CZ products! I have a 457 Scout with a laminate stock…it’s a sweet little 22lr
Hello and thanks a lot for this practical video. I would like to buy a CZ 457 22WMR, but I need to know about the material which its bolt made from. It seems to me that back side of the bolt is made from plastic. Am I right? Generally, is there any plastic part exist in these models?
Hi WTW.
love the video. Now I need to get one of those 22
Thanks for watching Ricky
I see those flies you should bait them to the targets and take one at 100 yds ?
Don’t worry about the barrel it’s fine a 22 don’t heat up like a center fire barrel
Thanks Randle
I always used a penny or a dime to adjust my scopes and most of the time I kept a dime under the elevation cap.
Good idea
I need to get a CZ.
🇦🇺 21:00 before notification came up
🤦♂️🤦♂️🤦♂️
I had bought a Escort 22lr from a local gun store and it blew up in my face the mag blew up into a buncha pieces.. it kinda looks like your rifle!
always a good idea to cycle with snap caps a couple times with rimfire.
feed jams can kaboom, glad it didn't really bite ya!
WTW, nice Chewbacca impression at 9:47 😂
😆😆😆
I would love to see your results with a better scope.
I have a CZ455 .22LR and I love it.
Awesome
I’ve shot the 17 hmr version of that gun with just iron sights and it shoots like a dream!
Awesome
I’d be very very happy, you’re virtually sub MOA at a 100, happy days !
I have one more need to have gun- a CZ 457 Lux in .17 HMR. Might be a day, might be a week, might be 3 years. But when I see one I'll buy it.
Another great video !
who tee who god bless you and your family for providing great content my whole family loves to watch
Appreciate you watching Daniel
I got one yesterday and it’s amazing 👍😀
My 17HMR and my 22LR are my current favorite guns to shoot...probably has something to do with cheaper ammo prices, but they are still my current faves nonetheless😂
Can't go wrong with a CZ, they make some very accurate rifles.
I agree
Those cz are beautiful rifles as well as set up right. My friend has one and after you set that trigger a feather would fire it. Awesome video Who-Tee-Who the wooden stock on his rifle is beautifully done as well, snug bolt. A truly very well made rifle!
Is Paul in the background grinding away?
Yes!
Where do you get the scope and rings?
I don't know why, but I love watching zeroing rifles. I'm I weird for that? Nah I love guns!
To remove the rear sight from a CZ, press down on the rear sight and slide rearward. The base can be removed as well, as it is attached via screws on the 457, rather than welds with the older CZ rimfires.
Wtw have you ever glass bedded any of your rifles
Never have
I like that laser sighter thing, it is cool!
Works out pretty good
On the last plate it looked like the wind was kicking up you could see the plates moving around a little
Might be
What rings and height did you use? I have the exact same gun and would like to keep the back iron sights on.
I think your gettin the hang of this brother
Thanks for watching William
Hay Mr. Squirrel can you stay there till the barrel is cooled off
😝😝😝
Nice rifle and very nice grouping
Thanks for watching Wayne
I never met a CZ I didn't like. 💥👍💥
Same
Good shooting !!
💥💥💥
Love the 22 content!
Appreciate you watching!
Speaking of 22lr have you tried the Winchester wildcat auto yet? I just got one and seems like serious competition a ruger
Haven't tried it
Well, I am impressed! Every range day begins for me with a Ruger American rimfire at 100 yds. It has taken me considerably longer to learn how to shoot it than anticipated(.22lr is different from 6.5 Grendel), but my groups are nowhere close to yours.
All about the ammo when it comes to 22lr I think. Subsonic is way better than supersonic
@@WHOTEEWHO, acquiring ammo has been a problem. To date, I have five types and five magazines one for each target. Yes I keep the targets with documentation on each. One of these days I may actually upload a video. After at least five more ammo types.
No cheek weld using a scope because the stock is too low with the hogback stock and the ultra high scope mount.
Cheek weld is overrated. Proven in my many videos shooting at 1000 yards