Boy! That sure isn't the back-breaking way WE made hay 60 years ago. It was all day long in the sun humping those 60 to 100 pound bails onto the truck and then off-loading in the barn. After we got all the hey in the barn, we had to hand it up the ladder to the hayloft. By the time we finished it was about 20:00 hrs. and we had started at 07:00 hrs. We were sweaty, dirty and itchy from all of the dust and hay seeds which found their way inside our clothes. The next day we showed up at the next farm and did the same thing for a dollar an hour. There's something to that saying, "Make hay while the sun shines."
Not impressed and I have loaded many times x thousands of tons of hay, looks good until you have to repair behind the operator. I prefer steady and moderate ops , period.
Probably rain forecast coming in that night but all hay grabs rattle like that. He was pushing it a bit. His loading was a bit rough. If loading a Transport Truck he should get it perfectly vertical etc. or the Trucky will make him fix it. Farming is very much like fighting a war. You and the weather and the season. At least 50% of the time you always seem to be racing to beat something. You can't leave it till Monday. It has to be done Sunday. One of the reasons many Farmers about 20 years ago started to reject too much Electronic and Computer Controlled gear on Tractors. After bad experiences with switches built into Circuit Boards operating Solenoid controls on the gears or PTO cost them $20,000 because dust or something got in the Switch they next time bought a Tractor with the least Electronics. Happened to my brother one night trying to beat storms coming. He was ready to bale Lucerne Hay. (Alfalfa in USA). Got down ready to start and the PTO would not go into gear. It all should have been in safe. He lost about 1.5 hours by the time he got started. The Storm hit. Ended up with Garden Mulch. Next week all that crap was thrown away. Drill a hole in the floor. Put a steel rod with a handle down to the PTO Gear lever (Thats the joke, it still had a lever on the gearbox. They all do.) and just pull the PTO into gear. I think he lost about $20,000 in Lucerne Hay. It was a John Deere. Next Tractor he bought was a Ford. They got the message sooner than some other companies and got rid of all the un-necessary crap Electrinics. His neighbour had the same problem with a John Deere. Some very bad accidents caused by that sort of crap. It does not matter what they do electronics don't like mud or dust. Cost him a lot of Hay also. Has cost lives. Caused injuries. Tractors jumping into gear etc. You brush a worn wire or something as you climb up into the tractor. Idiot design Engineers thinking they are clever. No it is dumb if you are the user fighting the War.
Haha, this video just popped up and i didn't check the date and thought it was a new video you filmed this summer and forgot to upload or something 😂 Nevertheless, it's impressive!
That Massey has only about 150 horsepower, she's about 2 and half tonne lighter, she did well considering the power and weight with the jcb, theres not that big of a difference in the load
HUSKY_390xp_boy the Massey doesn't have the weight advantage. It only weighs just over 3.5 tonnes maybe 4 if they have a belly weight on it. Plus the jcb has 80-100 more hp
I havent seen one down where i am, but believe its to push down the straw swathe that he is baling to stop it getting wrapped under the tractor or toe bar...
Tom Forrest It may be to fit onto the trailer better. If you look at the next video, you'll see that two pushed over bales exactly fit the width of the trailer. Only a guess of course.
A good movie of haw people abuse the machines, and when the machine brakes they call it shit, the machine is no good/brakes down,total failure, I think is the people that are.....t. TH
That's nothing, I use to have a trailer loaded and strapped with 39 big square bails in only 25 minutes, by my self. When someone helped it took me longer. Did it for 18 hrs a day for 6 weeks I'm a row. Over an area that covered 3 states. Did that for almost 10 yrs in a row
Авто/Мото
This is some very skilled driver, bales on moving trailer wow!
Boy! That sure isn't the back-breaking way WE made hay 60 years ago. It was all day long in the sun humping those 60 to 100 pound bails onto the truck and then off-loading in the barn. After we got all the hey in the barn, we had to hand it up the ladder to the hayloft. By the time we finished it was about 20:00 hrs. and we had started at 07:00 hrs. We were sweaty, dirty and itchy from all of the dust and hay seeds which found their way inside our clothes. The next day we showed up at the next farm and did the same thing for a dollar an hour.
There's something to that saying, "Make hay while the sun shines."
good job it’s not hay then
I thought the Massey's trailers was going over up the hill :D keep up the great videos! :)
Its amazing to see how well that little JCB teleporter handles the bales
neat work by the guy on the teleporter. great video
putting bales on a moving trailer... amazing
Its the best way to load up faster.
Nice for breake something
G
Not impressed and I have loaded many times x thousands of tons of hay, looks good until you have to repair behind the operator. I prefer steady and moderate ops , period.
@@alfredmorganroth9349 I wonder how many spears he breaks a season...lol
They now what they do. It's awesome how they load bales.
Nothing wrong with the driving skills of both tractors.
But the Massey Ferguson was the best driving up the hill
Amazing work quickly and cleaning
I've played too much farm sim. I kept thinking the bales would glitch and fall off.
Thats a really cool system modern agriculture right here
Fabulous video.
Nice job loading bales
Good idea to load the bales, with the bale trailer Moving
Dang those are big bales and that was fast loading.
Very proficient loader!!!!
.
Good operator
Great video George!
George showing the greenhorns how it's done again. Nice.
The Massey still wins on good looks and sounds great. Love t Big Masseys.
that is class I am a new holland , jcb , Massey Ferguson and John deere Fram
More impressed with the lift driver than the tractor race.
Hey George Do you know where you got that Light Bar From on the massey??? I would like to get one for my NH 8340 and its just right!
great video telehandler driver good job loading on the move
Awesome I'd love a go a that
The machine works 100% hard.. Keep going
Is it a new felid for putting good bales in wet grass congrats George
Awesome Agriculture Equipment Machine
Drive it like you stole it......😂
Nice equipment
good driver
These graphics for farming simulator are unreal!!😁
loading and moving! mad amount of skill
Sean Starbuck ha ha ha no skill in this
@@deepSingh-bi7mu how
Nothing wrong with the driving skills ✌
That's how you load straw....on the move.....😎😎😎😎😎😎
Somebody has had a few beers whilst driving the JCB 🥴
I think this method is really hard on equipment. Bang stuff around is not a good sound. What is the rush?
Alan Shelby the rain that’s about to fall from the sky..that’s the rush. Get it in before it’s wet!
Farming is the rush
Probably rain forecast coming in that night but all hay grabs rattle like that. He was pushing it a bit. His loading was a bit rough. If loading a Transport Truck he should get it perfectly vertical etc. or the Trucky will make him fix it. Farming is very much like fighting a war. You and the weather and the season. At least 50% of the time you always seem to be racing to beat something. You can't leave it till Monday. It has to be done Sunday.
One of the reasons many Farmers about 20 years ago started to reject too much Electronic and Computer Controlled gear on Tractors.
After bad experiences with switches built into Circuit Boards operating Solenoid controls on the gears or PTO cost them $20,000 because dust or something got in the Switch they next time bought a Tractor with the least Electronics. Happened to my brother one night trying to beat storms coming. He was ready to bale Lucerne Hay. (Alfalfa in USA). Got down ready to start and the PTO would not go into gear. It all should have been in safe. He lost about 1.5 hours by the time he got started. The Storm hit. Ended up with Garden Mulch. Next week all that crap was thrown away. Drill a hole in the floor. Put a steel rod with a handle down to the PTO Gear lever (Thats the joke, it still had a lever on the gearbox. They all do.) and just pull the PTO into gear. I think he lost about $20,000 in Lucerne Hay. It was a John Deere. Next Tractor he bought was a Ford. They got the message sooner than some other companies and got rid of all the un-necessary crap Electrinics. His neighbour had the same problem with a John Deere. Some very bad accidents caused by that sort of crap. It does not matter what they do electronics don't like mud or dust. Cost him a lot of Hay also. Has cost lives. Caused injuries. Tractors jumping into gear etc. You brush a worn wire or something as you climb up into the tractor. Idiot design Engineers thinking they are clever. No it is dumb if you are the user fighting the War.
Top video 👍
That's GREAT
Вот техника это я понимаю лайк и подписка👍
What weight are the bales please?
Why are they on theyre side ? 2 wide led flat 4 high and 5 stacks 40 bales 44 on the longer trailer i get
That has to be a very heavy trailer!
Haha, this video just popped up and i didn't check the date and thought it was a new video you filmed this summer and forgot to upload or something 😂 Nevertheless, it's impressive!
Amazing! I am at a loss for words!
What are the small wheels on front of the towing tractor?
For pressing the straw swaths when baling
Skills level 100
This is what happens when you have the correct equipment for the job. lol
The Massey did good for only having 160-170hp compare to like 230hp+
the massey had only half the load the jcb had + wider tires on the trailer the massey was pulling
That Massey has only about 150 horsepower, she's about 2 and half tonne lighter, she did well considering the power and weight with the jcb, theres not that big of a difference in the load
jcb tows 33 bales, massey only 18, and the massey has the weight advantage
HUSKY_390xp_boy the Massey doesn't have the weight advantage. It only weighs just over 3.5 tonnes maybe 4 if they have a belly weight on it. Plus the jcb has 80-100 more hp
Anything will pull hay trailers. An 80hp tractor would be good enough. Overall it is not a matter of weight.
Massey did a good job up that hill
+gunfluff for a 6000 series yes it did :)
How are you finding the Massey George?
MAD skills .. how hvy are those bails?
lee Cowley I'd say they would be about 400kg each
Harry Youell it depends on how dry it is and how compacted it is
Looks like they have done that before =)
twin axle trailer has a kingshoffer hitch on the back ... what do you tow behind it ?
7810ftw prob to tow a semitrailer with dolly behind it or a 5th wheel trailer
2 bale trailer on one tractor you can see the other bale trailer at the bottom of the hill
Guy sure likes to drive like a hot dog.
like a boss
love that loader
3:35 that bale spike is a bit bendy!!!
+JaMes Pearson Thon jcb and spike is getting a tight bit of abuse
I think people forget that one spike isn’t good for a load requiring three.
Nice jcb outfit, but from my experience the pivot tm320 Is a better harvesting loader for speed.
완전 상차에 달인!!!!
Please can I ask what is the set of wheels and box for on fasttrac
Squashes straw in the row when it's got a baler on the back.
@@GeorgeSaunders Cher's I'm used to old school blue power
My cummings B sear is has a striate pipe on and the locals have to get use to it.
*Крута технологія! Ми в Україні пропонуємо преса Krone BigPack для таких тюків*
Nice😎
what is the wheel thing on front of the fast track?
to push the rows down to stop it wrapping up under the tractor
thanks
What's the yellow box with wheels on the front for George?
I havent seen one down where i am, but believe its to push down the straw swathe that he is baling to stop it getting wrapped under the tractor or toe bar...
+Andrew Penny thanks Andrew! that makes sense when you think about it
Would love a job driving a tractor around all day...especially the Fastrac.
😱👍
Sweeeeet
What's the box at the front with the wheels on it for ? Cheers
Press down straw when working with baler.
Google translate :)
Tool box and other parts
Alternative Route it's a weight
Jake Mohnen no IT is a Straw press
Best Video yet for me :)
holy crap back wheel off the ground at 130 time to change your undies
Yup! Everyone that's been driving a loader or something and felt that happen know that horrible feeling!
It's not a horrible feeling. You'll only go over so far. You tip forward just lower the boom.
i shouldent want to buy any kit from them when they done with it
Bit ram on
😂 I mean they’re using the kit. Anything that does get damaged is repaired well
Как называется трактор тягач?
why did that JCB Telehandler driver keep pushing over the bales before stacking them?
It looks like George is flipping the bales so the twine is on the sides not on the bottom. I don't know why 👍😃
+Neil Conroy ahh thanks
Tom Forrest It may be to fit onto the trailer better. If you look at the next video, you'll see that two pushed over bales exactly fit the width of the trailer. Only a guess of course.
+argyll1952 ok cheers
Neil Conroy i think it's because they're more stable like this
DO J C B LAST AS LONG AS J D
Muhteşem
JCB 30bales? Massey 18?
in a hurry?
But if you spend all you profit on fixing equipment what is the point?
can u have sideshift on JCB LOADER /
There wouldnt be much point.
The loader is on another league......Fastrac takes the racing mettle with almost 2x the load, the turbo at 5:18 gotta be doing 140,000RPM
Probably twice the horsepower
Shultz forshowhower galtey
Great vid. I wanna do more bailing on fs19 now 😁
Класна
A good movie of haw people abuse the machines, and when the machine brakes they call it shit, the machine is no good/brakes down,total failure, I think is the people that are.....t. TH
How is that abusing machinery
The guy on the tractor loading bales he is good;
Who was driving the massey fuckin james may
Have you ever drove a tractor
Clarky !!! A funk in Massey 6480 is only 170 photos tuned you utter bellend!
Did anyone else notice the rabbits at 3:23 mating.
That's nothing, I use to have a trailer loaded and strapped with 39 big square bails in only 25 minutes, by my self. When someone helped it took me longer. Did it for 18 hrs a day for 6 weeks I'm a row. Over an area that covered 3 states. Did that for almost 10 yrs in a row
You’re hard
No f N about thier some job easy know they not paid by the hour lol
haha... I would have taken you on that Hill my 40kph 6480
the massey is only pulling half the weight !!!!!!!!!!!
its half the power lol
When da fuq did sustainable agricultural practice, become an internet meme? Just get the job DONE, fer Chrissakes !!!
(Also, racing WHAT Massey?).
I don't know about tractors...but jcb excavators suck
George you need a good woman
He has one!
dålig truckförare