Lossless Scaling Frame Generation How to use - Works on all GPUs and all Games
HTML-код
- Опубликовано: 30 июл 2024
- In this comprehensive video guide, you'll discover the step-by-step process for downloading and implementing Lossless Scaling with Frame Generation. This technique is applicable to any game, including popular titles like Alan Wake 2, Elden Ring, Hogwarts Legacy, and Red Dead Redemption 2. Whether you're using emulators like Yuzu, Cemu, Rpcs3, or gaming on hardware such as Intel HD Graphics, Vega 7, RX 580, GTX 1660 Ti, or GTX 1660 Super, this tool is versatile and effective. Boost your gaming experience by doubling your FPS, regardless of your GPU. Tune in and enhance your gameplay to the fullest!
Lossless Scaling 2.5.1.1 Frame Generation: store.steampowered.com/app/99...
00:00 Introduction, How to use and Configure
03:58 Lossless Scaling Red Dead Redemption 2
05:56 Lossless Scaling Starfield
11:56 Lossless Scaling Alan Wake 2
16:27 Lossless Scaling Zelda Tears of The Kingdom
17:44 Lossless Scaling Cyberpunk 2077
PC Specs:
CPU - Intel Core i5-9400F Hexa-Core 2.9GHz (4.1GHz Turbo) 9MB Cache LGA1151
Motherboard - ASRock H310CM-HG4 DDR4, 2 Memory Slots
Ram -Team Group T-Force Vulcan 8GB (2x8) 2666MHz DDR4
GPU - Gigabyte GeForce GTX 1660 Ti 6GB GDDR6 Windforce 192-bit
Storage - SSD 120GB Sata III 3.5" - SSD 960 GB Kingston A400, SATA, Read: 500MB/s and Write: 450MB/s - Internal Hard Disk (HD) - HD Toshiba 1TB Sata III 3.5" 7200RPM
PSU - 500W 80Plus and Active PFC
IF THIS VIDEO WAS USEFUL FOR YOU, SUBSCRIBE TO THE CHANNEL AND FOLLOW THE UPCOMING RELEASES.
Program used for recording: OBS Studio
Program used for performance statistics: MSI AFTERBURNER + HWiNFO64
#reddeadredemtion2 #alanwake2 #cyberpunk2077 #starfield
lossless scaling how to use
lossless scaling como usar
lossless scaling download
lossless scaling 2.5.1.1
lossless scaling configure
lossless scaling configurar
lossless scaling yuzu
lossless scaling frame generation 
Игры
The frame rate will depend on your monitor's refresh rate, 60hz - 60 FPS, set your game's frame rate to 30 FPS. 120HZ - 120FPS, fix your game's frame rate at 60 FPS (recommended by developers), it has to be stable without stuttering and so on.
Lossless Scaling 2.9 Frame Generation x3 Insane Update! ruclips.net/video/I89bnWMGyAY/видео.html
Lossless Scaling 2.8 Big Update! Frame Generation for Everyone! ruclips.net/video/0ynD23Ar2C4/видео.html
Lossless Scaling v2.5.1.1 Frame Generation: store.steampowered.com/app/993090/Lossless_Scaling/
Unlock Higher FPS and Minimize Latency in Every Game - Lossless Scaling Frame Generation ruclips.net/video/GQvR6aySEro/видео.html
To view the FPS of Lossless Scaling you need to use Hwinfo64 or activate this in the settings, Rivatuner will not show the FPS gained with the software.
Thank you to everyone who leaves a thumbs up and a comment on the video, this will make RUclips share the video with more people.
FSR 3 Mod How to Download and Install (New update) Works on GTX ruclips.net/video/sDW-XGjqdEg/видео.html
FSR3 MOD | Insane FPS on any GPU | Lords of The Fallen | Robocop Rogue City ruclips.net/video/etW4QemunWY/видео.html
FSR 3 How to fix errors in Alan Wake 2 ruclips.net/video/D69pOJ-IYWg/видео.html
Do not use frame generation tools in online games, your account will be banned!
Requests for free download links in the comments will not be answered, the software is very cheap on Steam.
Lasted 2018 developers run away
How do you set up HWINFO64 and Rivatuner to show the FPS gain?
@@Anonymous-jx3je yeah I was wondering that too cause for me It doesn't show, even though I can definitely feel the diference when the FG is on
The overlay you see doesn't come from Hwinfo64 but from "MSI Afterburner" and in any case, since you block fps at 30 with RivaTunner, the overlay will only show 30fps maximum and not the gain you get with Lossless Scaling.
This works in vr!! Not for the entire headset but it works for games running in big picture mode, I'm using big screen playing genesis games I retroarch and the frame gen boosts the games from 60 to 120fps
This software is a masterpiece
It's great, I have been using it for a few weeks now and the team is quite active at improving this software.
I uses it with a laptop and an eGPU and it really makes a big impact.
You mean IGPU 😂 what eGPU
@@SordidusFellatio Well I have a GPD G1 (RX 7600M XT) plugged into the laptop (i5 12500H) via Thunderbolt. LS lets you choose weather to use the iGPU or eGPU for the scaling/frame-gen.
This is very useful if using the laptops display as thunderbolt is a bottleneck, and using LS on the iGPU means the scaling and frames are added Laptop side.
Another thing I find useful is double Frame Generation. For example now Starfield has FSR3 you can get a good base FPS and the use LS to double the FPS again and I was quite impressed how smooth this was. Though there will be a latency penalty.
@@SordidusFellatio if you have tb3 above or USB 4,you can just plug a GPU dock and use desktop gpu on laptop
I'm loving to use this on old games it's perfect❤
Incredible Info about the FSR and that software from Steam. Many thanks for that! Sub definetly earned.
Software is working great on amd 5500u igp, forza horizon 5 from 30 to 60! Thanks for your video, and for the responses to people questions
I'm glad I was able to help you
I also have same 5500u did you try red dead redemption 2 and with another AAA title please share your experience/
but... "Do not use frame generation tools in online games, your account will be banned!" or you playing in single?
@@StyleX624 this software does not interact with game files so it is not bannable😅
How did you get it to work? When I try to activate it, it goes to full screen & frame rates drop even further.. I have activated windowed mode in games but then also my game gets into Full screen mode when I activitate it.
Right in time for the UEVR mod. could keep my 1080ti goin with the newer titles in VR. Fkn awesome 🤙 You my friend are a legend. Downloadin Tekken 8 now. Granblue Fantasy Versus Relink should run well with the UEVR Mod on my old codger gpu now. Bring it!
I factory reset my pc and now this software keeps the riva tuner fps when I hit scale it worked perfect before the factory reset know any way to fix?
It works great on Baldur’s Gate especially during Act 3 where the game can drop down all the way to 35fps from 100fps and such. The cursor still felt that stutter because of the 30fps limit, but the game is smooth like butter
But if i play in microsoft flight sim where my frames jumping from 20-70 depends on the location how I'm going to determine what frames I should lock the game in before I turn on frame gen. For example in Newark airport I have 15-20fps but on small airports I have 45 and 75 in the air so how to double frame rate in Newark location, kinda hard to figure this out .
You are my hero man 👍🏻
thanks
Can you try putting the resolution scale to 1.25 in rdr2 then use this frame gen? It may reduce the ghosting
By "All Gpus" do you mean integrated graphics aswell? Intel specifically
So i can use this with in game upscalers like dlss right?like can i use this with dlss quality in dragons dogma 2?
I'v got a question, i'v locked my max fps at 72 in rtss. When i turn on lsfg i see and feel the 144 fps, but rtss keeps saying that am running at 72 fps. Does anybody knows why ?
rtss cannot display the frame rate gained with LS, for this you need to use the Hwinfo64 plugin
U should test this out with Dragons Dogma 2. It really needs Lossless scaling
Is it important to lock rdr2 at 30 fps? Will it work on low end laptops? And how are you able to set 1080p on borderless fullscreen?
I cannot make it work on lenovo legión go on gta v or assasins creed odessey or Any other game Any suggestion?
I just got one question, how do I enable my mouse cursor while using the software? After starting it up the cursor disappears. I can still select things on screen, but i have to hover around til it highlights. So it's there, i just can't see it.
In the settings you can adjust this
Can u help me? My game always has a black screen / white screen when using lossless scaling, for example the Sifu game and Lego Star Wars the Skywalker Saga, but in other games like Watch Dogs 2 and FC 4 it runs smoothly
i Think he said at the start that the resloution screen needed is borderless windows or Borderless fullscreen not FULL screen or Exclusive
Can I set the game's refresh rate in the menu of the game itself instead of a software like RivaTuner?
I believe it doesnt matter, RivaTuner is usefull when the game itself doesnt have that setting
The ghosting of the reticle and the weird artifacts around the edged and bottom of the screen (I really don't know what to call them) are way too distracting. I tried this on the Gunner HEAT PC and the tank's reticle is always blurry with ghosting if moved.
It works but it wont stick at 60 fps it keeps going higher and cuasung stuttering. My tv is set at 1080p 60hz
Can your off taa and other anti aliasing options to use the software or no?
do i need to play offline mode on any game before running the software?
What TTS do you use? Sounds pretty good
then how to show the FPS gain when you are using LS??? since RivaTuner doesn't show the FPS boost.
and how's your Hwinfo64 settings to make RT showing the FPS boost?
I explained this in this video ruclips.net/video/0ynD23Ar2C4/видео.html
Its day and night for PC VR, MS Flight Sim settings maxed out, I set Resolution to 170% I tried 200% but wasnt as smooth, it is mind blowing, I never though it would be possible. Im using an old RTX 3080ti, its still a beast of a card though.
Would this work if I can barely average 60 fps on my old laptop? About 10 fps
it is perfect for steam deck😍
when i enable this on my rtx3080 is maxes out the power usage from say 130w to 320w on both scaling or frame gen.
When the software is activated, it increases the use of the GPU, but I can't tell you why there was such a large increase in power use. Maybe your monitor has a very high refresh rate and running at 144 FPS or more has greatly increased GPU usage.
if you told me 5 years ago that soon downloading fps is posible i would have laughed in your face. yet here we are this is just fucking insane and saves a lot of moneh
I wanted to know how to improve ghosting, I use it in Tears of the Kingdom, there isn't that much, however, there are times when it is very visible
My computer can get over 45 frames in some places like the observation post, in the game 55 and up, in the abyss it's more complicated, in some very specific regions near the mountain of death I can get 13 to 20.
With Lossless it always stays at 60 frames, but the more it has to generate, the more ghosting.
I wanted to improve this.
I just wonder, how you are be able to record lossless Scaling effect...Since recording software that i know (OBS & AFTERBURNER) can't record it.
What software do u use to record it and the settings ofc...
Perhaps you willing to give us the guide video about how to do it..... Pretty please??? 😅😅😅
as you can see in my taskbar I recorded with OBS studio on default settings
@@gtx1660tiplayer then how you are be able to record the LS effect on screen?? That's i need to know how.... 🥺
I@@gtx1660tiplayer
There are still a lot things needed to improve. It showed 60fps but i feel like it 30. Fps is not stable at all
If your 30 fps werent stable to begin with itll be laggy lol. Ghosting is almost unavoidable it is fake frames afterall
Ghosting...
you gotta lock the game fps to the lowest it goes when not locked, as example it howers around 34fps lock it to 30fps or 56fps lock it to 50 fps, so it stays consistently the same fps all the time, then adjust your screen refresh rate to DOUBLE the fps you lock your game to, so if you choose to get 30fps you choose monitor refresh rate as 60hz, if you adjust settings to 40fps then change screen to 80hz and so on, this made it smooth for me. always cap the screen hz or fps to half to eachother, and if frame gen fps goes higher than your refresh rate (you see this by enabling show fps in lossless scaling) you lock the fps of lossless scaling in rivatuner to the screen refresh rate you choose to use.
@@hupe5836 thanks so much. I'll try and feedback tmr.
@@ngohien7011 no problem let me know if it helped and if something still happens ask again
You don't know how many players you make him happy I will pray for you everything
pray for the creators!
I have been trying Lossless scaling on plutonium launcher (free call of duty). One of the games i play mw3 i typically get avg 130fps on medium to low settings. When i use Lossless scaling it literally makes everything worse i go from 130 to 50 or 88 fps and sometimes the lossless app will dissapear and my game will be locked at 60fps when i fullscreen it. Need explanation or help please.
It depends a lot on your PC configuration and your monitor's refresh rate, I recommend using it only in single-player offline games
How did you enable ray tracing in your 1660ti in cyberpunk?
ray tracing works on 1660 ti but it is not supported so the FPS drops to 30
with all unsupported gpus, lock 60 fps?
not really that lossless though, the image still tears down a little when moving camera, that can be bothering to some
its on beta, calm down.
@@Boxboyy1
It is not about beta. lossless scaling has always been mess with frame generation or without. whenever I tried it on different systems it hurts the gameplay smoothness as it works with the output images on a 2nd layer hurting motion visual clarity and latency. I tried to make use of it with FSR 1, but I couldn't. It increased the frame rate, and fked up the motion at the same time which makes it useless
@@IslamGhunymyeah well it currently does better than dlss and fsr according to the latest tests
thanks man imma sub, i got lossless scaling years ago and never used it
the new update with frame generation has completely changed the software, more useful today
you should also turn on allow screen tearing which is off by default. This prevents weird graphical glitches like ghosting on text. i believe the software isnt good at dropping extra frames.
Gotta try this out, thanks
What software are you using to show the outcome FPS? In MSI Afterburner it shows the normal FPS, not the one from LossLess
you need to use the Hwinfo64 plugin for Rivatuner
I tried this software but didn’t see any difference in performance for games the only thing is it’s constantly showing 100+ fps
Same. Doesnt work
If you've locked the games FPS to 30 then how is it then pushing past 30fps with lossless scaling frame generation and ignoring rivia tuner? Surely it would just stay at 30?
Rivatuner limits the frame rate of the game's graphics engine, the frames created through interpolation by lossless scaling are limited by the monitor's refresh rate.
will it only work by limiting framerate to 30fps
or can we limit to 45fps and get 90fps via frame generation
have a 165hz monitor
The developer basically says cap your frame rate half of your monitors refresh rate, monitor if it's stable and if it is, enable it.
I'm on a 144hz, I'd cap my FPS to 72. If it remains stable and doesn't dip then I would enable it.
How's the input latency feel from 30 to 60 fps?
its good
Nice video man, does this work with World of Warcraft? can you do a test? thx
I can't lock fps what so ever, I just turned v sync on
Does it work in intel igpu
(I can run rdr2 in 30-50fps in low settings without this mod)
Have you tried it?
How did you get it to work? When I try to activate it in my laptop having AMD RYZEN 5700u, it goes to full screen & frame rates drop even further.. I have activated windowed mode in games but then also my game gets into Full screen mode when I activitate it. Please help
set game to half your monitor refresh rate. it must be borderless window mode. then the tool will double the fps
did it work? have the same cpu.
@@kashmeer6794 yes it did work. Previous driver version was causing problems. I updated the driver & it worked fine
@@pinkipromise Thanks. I was doing all that but still it didn't work. Problem was with driver maybe. I updated the driver & then it worked flawlessly.
Do you experience crashes with TOTK and can you send links for your mods on it?
I want to play TOTK on pc and I use TOTK Optimizer 2.0.8. My monitors refresh rate is 144hz but I set it to 120hz. I set the frametime limit in rivatuner to 60. Base game FPS is 30. Am I doing it right?
you need to lock the FPS to 30 to reach 60 FPS with lossless scaling. I have old videos on the channel explaining how to use mods in totk.
What if i have a 165 hz monitor and i limit the in game fps to a number like 82 fps, will it work?
yes, but your game has to be at 82 FPS without stuttering
Is it more important to have the stability or match your screen refresh rate? I can get between 82 and 130 on Palworld with occasional dips to 70 without it. Would locking it to 60 feel like a smooth 120 on a 165hz screen?
I get 15-20 fps on witcher 3 in my Potato Pc
Should i Try this?
Also if i try this should i lock my frames at 15 fps?
Don't do this, the latency will be very high and will be unplayable, the game needs to run at least 30 FPS
@@gtx1660tiplayerI tried fsr3 mod got 30-35 fps but so much ghosting and zagged edges i couldn't play
Just play the Pre patch version, just install textures and camera mod and you're good. :) free 80 fps more
@@yerbalxrd I baught it on steam before next gen update and it used to run fine but after update it become unplayable
So how exactly I am going to get more fps ? Can you help further
@@SKNagar to play the older version you have to choose "beta" 1.32 version in steam options
Will this work in VR? Fluid motion frames works great on AMD Cards and VR. Just wondering if anyone has givin this a go in VR?
In the comments of my videos, some people said that it works in VR
Hello, tried on Helldivers 2 and my fps is still locked at 30. Did as you have shown but to no avail
yup same here
@@jackofalltrades5238 fps metrics can't show the fps that the app makes so you are getting higher fps but the meter won't show it
@@Shahzad12357 Oh yeah I was able to figure it out eventually lol
i dont know why but when i try to use it in escape from tarkov it ruins my fps in any option
it doesnt work if use FPS counter from AMD Software, maybe your counter same conflict with it
This thing is freaking amazing. I tried it out on Gotham Knights, typically I would get 60-70fps, once I enabled Lossless Scaling, I was getting 144fps! I could really see the smoothness!
I tested it on so many games and it made a heck of a difference! Now though….not sure if anyone else has been having this issue….but if I were to try Lossless Scaling on Ubisoft games in the Ubisoft Connect app (example Avatar Frontiers and Crew Motorfest), instead of gaining fps, I would lose fps.
When I enabled Lossless on Avatar, I went from 80fps, to 20 fps, same went for The Crew Motorfest. Not sure what is causing the issue and again, only time I was getting these low fps is launching the games on Ubisoft Connect. Everything else works great!
im try to using lossless scaling with AC Mirage and the game drop fps so bad, then im figure out why im drop fps, not from lossless scaling, RTSS fps lock is the thing cause fps drop, so im turn off rtss and AC Mirage smooth again without RTSS and lossless scaling, but when im try to use in game fps lock, lossless scaling is not smooth as when im use with RTSS, so i turn off RTSS fps lock and game playing ok for me
try to limit fps at the driver level, nvidia control panel or amd's equivalent if you have it, i think intel has one too. @@huyan762
Worked for me on Wildlands and valhalla
It makes my game dark for some reasons how do i fix this?
LS only works in borderless windowed mode or in windowed mode, in full screen you will have a black screen unfortunately
i got gt940mx 4gb gddr5 gpu and when i use this the fps drop, anyone can help?
make sure you can run the games at least 30 FPS without the software, turn off HDR and VRR, turn on the software's FPS counter, don't use Rivatuner for this
Actually wanted to use this Frame Generation tech in competitive games more specifically in Valorant and wanted to observe the overall performance in it.
My Specs are
CPU - Intel Core i7 870 (4c/8t) @ 2.9 Ghz Locked ( 95 Watt )
GPU - GT 710 GDDR3 Variant (Overclocked while gaming only to Memory +220 Mhz and Base Clock to +430 Mhz) (30ish Watt after Overclock)
Ram - 8gb DDR3 at 1330 ( at 9:9:9:24:174 )
Storage - Samsung Evo 870 (500 GB Variant)
Overall in it. I do get around 70 to 120 FPS at most but then too much of the Agents abilities are going on at that time the games does lag up extremely.
FPS does drop somewhere around 40 to 50ish for around 5 to 10 seconds.
So Was Curious to see what kind of magic can this Frame Generation Technology can do on these really low end Graphic Cards,
Can it really breath a new life in it ?
Don't use this in online games, on very old GPUs the latency can be very high
no point using FG especially in compe FPS. u gonna kill ghost enemy? FG is useful on single player games
great job. can i try it also with 7900 GRE with fs2020 and star citizen ? what kind of setup will be better for me ? is it a must block via riva tuner at 30 fps ? thx in advance for your help
do not use in online games, the higher the base FPS the better the frame generation performance, in the current version it is not necessary to lock the FPS
Only fs2020 and star citizen.... No online games. Thx
Don't work for me in full screen I lost my mouse visibility, In borderless no difference with FSR@@gtx1660tiplayer
I don’t care about getting fps above 60 so
Can I use this without any hud ghosting on cyberpunk?
Also
Even if I have 120 hz monitor
Can I cap to 30 on riva and get constant 60?
Is that how it works
It doesn't work as well
Tried it on 2 games
Spiderman remastered and ghosting was so bad that it was unplayable
In days gone it reduced the fps to under 10 lol
you will have to change it to 60hz on Windows
@@J-cn3le hey
If you have tried fsr fg
I got a question
When I played cyberpunk with fsr
I got above 100 frames but it felt weird..
Like something was pulling my mouse or the frames felt a bit jittery.
So my question is
If I limit my screen refresh rate in windows settings to 60
Can I play the game at constant 60fps with less stutters? Btw I’ve got a 144hz display
@@AldoDavis-vz4hb yes change your refresh first to 60 hz then cap your game to 30 fps, the app will work as expected
good job but i dont understand how setup all on lossless with my 7900gre 3800x 32gb nvme 980 evo7200 on star citizen and fs2020, i lost my mouse when LL start....any suggestion in the setup ? thx in advance for your help
the game has to be in windowed mode or borderless windowed mode, avoid using this in online games
Can I use it with star citizen? Can I use it with 7900 gré? But windowed is not bad against full screen? @@gtx1660tiplayer
My screen just stays black in Cyberpunk 2077 no matter what option and settings I use, nothing works.
Damn, what kind of wizardry is this, ima try this on my my R5 3600 rx 6600 system to see if it any better than amd afmf.
Now i am inerested in the Programm can i now play games like Elden Ring with 120fps?? because they are capped
I didn't test it with this game, but it has to run at 60fps without drops, your monitor must have a 120hz refresh rate to get 120fps
doesnt seem to work with enshrouded
can it work without borderless window?
my game didnt have that in setting, only windowed mode
dont you have windowed fullscreen?
@@justdancefan-tn7yl dont have
Its either fullscreen or windowed mode
Btw im tried it but got blurred when moving the camera
My monitor laptop is 60hz so i set rtss fps limit to 30, but it get blurred
For some reason I kept thinking this was software to increase fps but it is advertised as just scaling windowed games to fullscreen which seems a waste of time to me.I don't even understand why this matters at all even windowed mode can be played full screen so what is the point?I have never even thought about needing anything like this unless I assume I were trying to upscale some old Sega or Nintendo game but idk what this is actually supposed to do that matters.
Gonna try this with a VR game like Elite Dangerous..
Bro nice video.
What overlay are u using to see fps
to view the FPS of the lossless scaling software use Hwinfo64, or activate it in the settings
happy week end my friend all my support like 82 20:31
for you too, thanks
I'm using Lossless Scaling for Palworld and it's amazing.. That game isn''t well optimized at all and my old gaming laptop struggled quite a bit to even maintain 30FPS in certain areas of the game.
So I put the game in window mode, scaled it up with Lossless, turned 'Frame generation' on: Nice, 60FPS everywhere. I'm gaining quite a bit of input lag by doing that, but it's managable. :D
how your setting in lossless? i using windowed too at palworld and lock fps at 30.. then nothing happen.. it still lock 30fps after lossless is ON :( help
@@argianapproject You have to make use of Losless's 'Frame Generation' function. It's set to 'Off' by default, so make sure to turn it on by setting it to 'LSFG'.
If it's still not working I could write down my exact settings for you if you'd like that.
@@Sabishi1985 yeah sure.. that part ON already.. then nothing happen.. yes of course if you dont mind it
@@argianapproject Alright, here we go. Those are the exact settings I use for Palworld:
Scaling Mode:
Auto
Aspect ratio
Scaling Type:
NVIDIA Image Scaling ('AMD FSR' works great too)
Sharpness:
0
Frame Generation:
LSFG
Clip cursor:
On
Adjust cursor speed:
Off
Hide cursor:
Off
Scale cursor:
Off
Vertical Sync:
Off
HDR support:
Off
Allow tearing:
On
Draw FPS:
Off
Capture API:
DXGI
Preferred GPU:
(whatever your GPU is. For me it's my NVIDIA card)
Output display:
Auto
Crop Input:
0 everywhere
Multi-display mode:
Off
Windowed mode:
Off
VRR support:
Off
@@Sabishi1985 bestt thankyou mate!! you made my day :)) instantly working.. bit surpirse the fps jump double as before 🙏🙏 thankyou verymuch good bless!!
is anyone having issue with lossless scaling hotkeys in some games? because when i tried it to RDR 2 and GTA 5 windowed mode, Nothing happened.
This happens in some games unfortunately
@@gtx1660tiplayer I've found the solution. If the default hotkey's not working in certain game just change the hotkey while the game is running, i tried ctrl+Q and it worked.
Is anybody dealing with screen ghosting when using frame gen? Idk how to fix it…
Yes, it's horrible you don't know how to fix it
Nice video. I have one question, can I use it in online multiplayer games like PUBG? Thanks!
No, only use in offline games
I'm from Russia, so I use a translator, this program is really good, yes there are graphical bugs, but the FPS growth is almost 2 times justified. If NVIDIA were not a stingy company, I think we would see the same stuff from them on all video cards, and considering that they have money and people, I think there would be much fewer bugs.
Thanks to the creator of this program
NVidia launched frame generation as an exclusive to the RTX 40 series, now thanks to LS and FSR3 mods we have this feature on all GPUs.
Wasn't there frame generation in 20, 30 lines?@@gtx1660tiplayer
only in games that have AMD's official FSR3 Frame Generation
The creator is a god
doesnt work on far cry 6? do you have a another tips before i refund it?
it works on ANY game, as long as there is windowed mode, or windowed borderless
Would this work together with fsr 3 mods in different games?
it will not work
didnt work in ubisoft?
bro is it work on gt 710
Do you use msi afterburner or hwinfo for onscreen display?
both, you can only measure the FPS of the frame generation of the lossless scaling software with hwinfo
@@gtx1660tiplayer ok thanks 👍
@@gtx1660tiplayerwhat option should I turn on in there to see the fps
In the lossless scaling itself there is the FPS counter, just activate it in the settings, I didn't use it in the video because it is too small
@@gtx1660tiplayer in hwinfo that's the one I want to use.
Hey, do you know if this frame gen works in Minecraft Java edition?
It will probably work, I haven't tested it yet
@@gtx1660tiplayer Thank you for the quick response! I would like to bite the bullet and test it myself, but I'm not willing to spend on this without being certain it works.
I asked a bunch of others, maybe one of them might have tested it.
Thank you!
Oh another thing I have 1050 ti so I want like 40 fps , so following your method in my GPU i should get 20-25 to 40 fps easily using LSFG, and how much latency problem should happen to me😮
I don't recommend it, you need to reach at least 30 FPS without the software, below that you will have high latency and graphical bugs, the recommended by the developer is 60 FPS for a 120Hz monitor for a perfect experience
@@gtx1660tiplayer ok and what about maintaining 30 fps with fsr 2 then enabling LSFG,🤔
somehow not working on 1060 3gb get drop to 30fps if FG activated
your game has to run at at least 30 FPS without the software, to be able to double it to 60, use the program's frame rate counter, Rivatuner does not display the FPS increase
@@gtx1660tiplayer I know how its work bro. the real question is why your counter can read it, mine cant event tho im feeling like gain some frames.
How do you go more than 30 fps even if you are locked to 30 fps. How?
The game engine is limited to 30 FPS, LS doubles this frame rate based on the monitor's refresh rate 60hz = 60fps
Bro i have 144 hz display so how much fps should i set on tuner
The game you test must run at a smooth 72 FPS, if this is not possible, reduce the refresh rate on Windows, to 120hz or 60hz
It works if you put it on half your PC refresh rate, in your case 72 fps, the problem and what made me uninstall it is that you get a lot of ghosting around the character, so it's not worth it for me, maybe in the future when they fix this
The Ghosting around the character would kill it for me. I understand if you have a old PC you have to do what you have to do but, This should be used more so like a last resort over a necessary technology.
I have 7900 XTX, is this just like AFMF?
It's similar, but the FPS gain is not lost with fast movements as is the case in some games. If you have a 144hz monitor, the lossless scaling software will help you achieve this FPS in 4k resolution and ultra settings.
Dude, this application lowers my fps for me and makes me feel like it's getting too hard, what should I do?
Disable VRR and HDR in the settings, your game has to run at at least 30 to 40 FPS to reach 60 FPS with the software turned on
İ have 1660 ti and i allready disable vrr and hdr and i can reach 30 fps i use riva tuner for capping my fps but program fps shows 120-170 but feels like 20 fps
@@gamiriccvac5577 with the FPS set at 30 FPS you should not run at 120 it has to be 60 for 120 FPS
i cant really say, but at least on Rocket League its a little weird, i see the fps increase but i cant feel it
It doesnot work for me, i did all your step but still in 30 fps not 60
Don't use Rivatuner to measure FPS, it won't work, activate the lossless scaling FPS counter or use Hwinfo64, it only works in borderless windowed mode
I downloaded everything, but the lossless scaling exe just doesn't open.
I don't know what the problem is, request a refund from Steam
Can i use this in old game like skyrim?
yes, it will work
How do you do it with yuzu, mine's not working
only works in borderless windowed mode
If i get a solid 15fps stable. I'm more interested in how this helps with 30fps gaming. This is the difference between unplayable and playable.
I don't recommend it in games that run at 15fps, the minimum acceptable is 30fps to reach 60 with frame generation
Is this different in FSR 3 mod?
very different, it depends on the monitor's refresh rate, creating a frame interpolation that greatly improves the fluidity of games