How To Paint Crimson Fists Primaris Space Marine

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 57

  • @catpapa3615
    @catpapa3615 5 лет назад +17

    This is one of the most helpful and straight forward tutorials I've seen. Thank you for your'e attention to detail and explanations.

  • @davedogge2280
    @davedogge2280 5 лет назад +11

    They were the 1st on the front cover of the first WH40K rulebook and all they get these days are some upgrade sprues in a box with Imperial Fists on the front cover as a Christmas exclusive !! I prefer their colour scheme more so than Ultramarines.

  • @porcu12345
    @porcu12345 4 года назад +3

    Looks fantastic man. Definitely going to use this when I start painting up my Crimson Fists.

  • @zombiemanar7823
    @zombiemanar7823 5 лет назад +7

    Thank you rob because I can use this for my night lords primaris.

  • @Sylan-ms9kj
    @Sylan-ms9kj 5 лет назад +3

    Thats some Eavy Metal leval stuff there man even better really. Great job man

  • @damiencrespan8957
    @damiencrespan8957 Год назад

    Great video dude, the most helpful I've seen

  • @MrStingray075
    @MrStingray075 5 лет назад +1

    Great video Rob. Watching it makes me wanna finally learn the edge highlight technique as you are right and Space Marines are all about the edge highlight.

  • @infinity_moment
    @infinity_moment 5 лет назад +3

    Hi, Rob! Thanks for your tutorials!! Just finished painting first of the Farstrider's band exactly like you did it on the video. Looks amazing :) Thank you!!

  • @davedogge2280
    @davedogge2280 5 лет назад

    This is the template paint guide for most (not all, Space Wolves, Custodes etc) Space Marines. I have had some SERIOUS problems with applying GW washes where i get my perfectly airbrushed (say) smooth Macragge Blue coffee stained with the wash even if i immediately try to move it around with a different wet brush. So I'm trying gloss varnish then the wash on top so it runs into the cracks and recesses easier, I've had some success and it's easier but not foolproof.

  • @Brickerbrack
    @Brickerbrack 5 лет назад

    Magnifiers are super-handy. I have a pair of cheap reading glasses (2x magnification, got 'em for about £2), and they make details _so_ much easier...

  • @maxbrandt6
    @maxbrandt6 5 лет назад

    Very nice work, you did it GW style. I'll keep that Titanium white in mind for the very highest highlights, it's smoooov!

  • @zombiehunter5000
    @zombiehunter5000 5 лет назад

    great tip with the washes! Will definitely give that a try!

  • @perche26
    @perche26 5 лет назад +1

    Rob in these videos it would be nice if you left at normal speed the part where you outline the mini, for beginners a visual guide of how to place the brush is a great help.

  • @MrSmokincodz
    @MrSmokincodz 5 лет назад

    Excellent job, really fun to watch

  • @kaldaris666
    @kaldaris666 5 лет назад

    Awesome video as always thanks Rob!

  • @Digitalfiendscom
    @Digitalfiendscom 5 лет назад

    Fantastic video and great paint job

  • @mythicaldakka
    @mythicaldakka 5 лет назад

    If you can reliably paint Space Marine eyes, you are a god lol.
    Good stuff, Crimson Fists are my main army so I love to see vids like this (mine aren't nearly this nice, though I'm redoing my Dreadnought and Terminators so hopefully there will be some improvement there). Definitely taking a crack at edge highlighting.

  • @TheMathieuJonathan
    @TheMathieuJonathan 4 года назад

    B-E-autiful! Thanks for this tutorial, really makes me want to try it 👍

  • @robmccord2583
    @robmccord2583 5 лет назад

    Beautiful work. Great advice. Thanks

  • @tomludlow1
    @tomludlow1 Год назад +1

    do you put the flow improver on your palette or in your paint container?

    • @lallsta_paints
      @lallsta_paints Год назад +1

      Hi Tom, sadly Rob passed away in 2022. My advice would be to use the flow improver with the paint on the palette, the same way you would if you were thinning with water. Have a few drops of the paint and a drop of the flow improver separate and take a little bit of the flow improver and mix it into the paint until you get the desired consistency 😊

  • @cameronthompson7314
    @cameronthompson7314 5 лет назад

    I found a good method for edge highlighting (if you are struggling to get clean thin lines) is the drybrush the highlights on before washing then come back in and paint the base colour over the flat panels - this fixes the wash stains and cleans of the drybrush scuffing on the flat panels. Thoughts?

    • @RobPaintsModels
      @RobPaintsModels  5 лет назад

      I suspect it's just as time consuming as if I was doing Edge Highlights normally but if it works for you then go for it.

  • @Black_Blow_Fly
    @Black_Blow_Fly 5 лет назад +1

    This video is the perfect length .

  • @CaptainMcSpleen
    @CaptainMcSpleen 5 лет назад +1

    How do you apply the matt varnish as a spray? I've only seen it in a bottle. Love the work btw, I'm planning on crimson fists for my dark imperium set

  • @CraftyWarGaming
    @CraftyWarGaming 5 лет назад

    Really nice tutorial. Nice a clear m8

  • @criticalnerd1404
    @criticalnerd1404 5 лет назад

    man this looks sick! Are you considering doing more chapters or do you mainly showcase personal projects?

  • @alexanderk.7782
    @alexanderk.7782 4 года назад

    How you pin the Models, heatedt metal wire in the resin, or Drill Pins, or is it a paper clip? :D

  • @MeGolf92
    @MeGolf92 4 года назад

    Can you please tell me what you used to pin all the parts? And is that a cork that you attached the pieces too? Thanks

  • @warcraftdude13
    @warcraftdude13 4 года назад

    how would i go about weathering highlights and scratches for these guys, what colors? (doesnt have to be exact like citadel just asking what color scheme for weathering)

  • @dannyeccles1894
    @dannyeccles1894 5 лет назад +1

    I use the same varnish as you do but I always end up with a very glossy finish.
    What am I doing wrong? Do you thin it down when putting it through your airbrush?

    • @RobPaintsModels
      @RobPaintsModels  5 лет назад +1

      You have to give it a REALLY good shake to make sure the talc is mixed into the varnish properly. All varnishes are glossy the only difference is how much matting agent is in them and the matting agent and varnish tend to separate very quickly.

    • @dannyeccles1894
      @dannyeccles1894 5 лет назад

      @@RobPaintsModels aaahhhhhh, that's what I'm doing wrong with it.
      Thank you very much.

  • @BLEMFIDEM
    @BLEMFIDEM 5 лет назад

    Sorry mate but the link for the equiptment doesnt work. I just wanna know what brushes you use, can you link them in this comment please geeza? Great video btw I dont even paint space marines but your content is just good

  • @pccleric
    @pccleric 5 лет назад

    Nice video. I am a big dry brush fan, don't know why, what do you think about that instead of line highlighting

    • @RobPaintsModels
      @RobPaintsModels  5 лет назад

      It can work well if you're good at it I just prefer edge highlights as they involve less touch ups for me and I prefer the clean lines they make.

  • @lordrumpel566
    @lordrumpel566 4 года назад

    i dont find winsor and newton galerial matt varnish as spray. how to apply this?

  • @tracygrove3484
    @tracygrove3484 5 лет назад

    Thanks for the great tutorials. I just picked up some liquitex flow aid to try out. It's also mixed at 1:20 with water. Can you pre-mix this in a bottle? I've heard it will go bad and maybe stink.

    • @RobPaintsModels
      @RobPaintsModels  5 лет назад

      It's fine to pre-mix. I've got a 250ml dropper bottle I use for the job. So long as your water is clean to start with and you aren't dunking your brush in it you'll have no problems.

  • @MrBorzorg
    @MrBorzorg 5 лет назад

    Rob, great paint like usual. Your brushes are amazing, what’s the size you’re using for the highlights? Thx

    • @RobPaintsModels
      @RobPaintsModels  5 лет назад +1

      That would be a Brokentoad size 1 which I believe are now out of production. I started out trying to use a Redgrass Games Size 3/0 but I couldn't get along with it so I switched.

    • @MrBorzorg
      @MrBorzorg 5 лет назад

      RobPaintsModels thanks for the information.

  • @7bootzy
    @7bootzy 5 лет назад

    Another great one, Rob! Also, what's the piece of music called?

  • @alecideas
    @alecideas 5 лет назад

    Love this stuff.

  • @ahekarin
    @ahekarin 5 лет назад

    Thanks for your videos!)

  • @corneal35
    @corneal35 5 лет назад

    How do you pin your parts and do you topcoat after?

  • @sauceforce9623
    @sauceforce9623 5 лет назад

    How much should I thin paints?

  • @DrDunce-wj8ke
    @DrDunce-wj8ke 4 года назад

    you should have more subs

  • @MrGenerichead
    @MrGenerichead 3 года назад

    Is there any reason you didn’t use the airbrush to apply the overall nuln oil?

  • @lordrumpel566
    @lordrumpel566 4 года назад

    can xyou make an video "how to paint grinson fist dreadgounght/vehicles"? pls^^

  • @MiNDmaZing
    @MiNDmaZing 5 лет назад

    Where did you get the decal? Cant find them

    • @RobPaintsModels
      @RobPaintsModels  5 лет назад

      The Space Marine decal sheet that's in all the non-primraris infantry boxes.

  • @cedricordener3971
    @cedricordener3971 5 лет назад

    srx enlever les dislike svp your video is very COOL

  • @irishmarine3
    @irishmarine3 5 лет назад

    Bummed you didn't go over the dusting effect on his feet :(

    • @RobPaintsModels
      @RobPaintsModels  5 лет назад +1

      That's covered in the basing video which is currently available to Patrons.

  • @OdinMMA
    @OdinMMA Год назад

    I don't really get a "how to paint" video using airbrush but not explaining how to do those parts with a brush. The vast majority of hobbyists do not use an airbrush.

  • @daddycosmo1954
    @daddycosmo1954 5 лет назад

    Make more age of sigmar