2012 - 2014 Toyota Camry SE 3.5L V6 Oil Change
HTML-код
- Опубликовано: 6 фев 2025
- 2012 - 2014 Toyota Camry SE 3.5L V6 Oil Change
How to change the oil on your 2012 - 2014 Toyota Camry SE 3.5L V6.
camry l, camry le, camry xle, camry se, 3.5l camry oil change, oil change camry, v6 camry oil change, 3.5l camry oil filter change, how to change oil on camry, toyota camry oil change, 2012 toyota camry oil change, 2012 camry oil change, 2012 camry, 2012 camry se, 2012 camry maintenance light reset, camry oil change, camry oil filter change, 2012 camry se v6, 2013 camry oil change, 2014 camry oil change, camry le, camry xle, camry se, 3.5l toyota camry oil change, camry oil filter
2012 - 2014 Toyota Camry SE 3.5L V6 Oil Change
Oil filter cap torque to 18 lb.ft.
Oil filter cap drainplug torque to 9 lb.ft.
You forgot to mention to change the rubber oil ring and coat it before you install the filter.
Two questions- Why did you use a conventional oil filter instead of XP Wix that's a Synthetic filter. Also why didn't you drain the oil housing thru the center plug and replace the O-rings(they come with new filter)?
I change my oil every 5000 miles... so by the time I change the oil again, the filter will never see the 10k miles we are told to travel... (filter is less worn). I skip the center plug because in my experience, it's a waste of time, just skip that step and make your life easier and simpler when draining the oil, less steps, same result my friend. Oil change done...
@TheRealSkeptyk Milage has nothing to with filter type. Synthetic filters are designed to filter Synthetic oil and conventional filters for Mineral based oil, since the are made of paper and synthetic filters are like a teflon fiber. If you don't mind the mess it makes keep doing it your way. It just doesn't have to be that way.
You're full of sh........
Can you share the link for the wrench pls?
Thank you for your video. It was very helpful 🙂 I really appreciate it 🙏
You did not take the drain cap off from the bottom of oil filter housing, stick the plastic drain plug that comes with every new oil filter to let the oil in the filter housing drain first. When you do that, you will not have oil spilling everywhere when you take the filter housing off. Not sure if this is the best video for changing the oil in Toyota 3.5L engine!
Bro, thanks for the view... 🙃
Good video. Thought there was a torque spec for the oil pan bolt. Do you recommend putting any oil on the oil filter, is there a gasket on that filter?
No need to put oil on the filter, the oil filter comes with the O ring that acts as your seal when you tighten it down, dont over tighten, it should be no more that just a a tad past hand tight.
Oil filter socket size?
14 mil
How many liters take this vehicle with filter 6 liter or 5 i have same car 2012 v6
6.1 liters with filter
WRONG Replace all old o rings on filter and new crush washer on oil pan and torque as spec.
Someone woke up angry at the world 🌎 ha
Should a new crush washer be purchased from the dealer or at any auto parts store?
When are you going to plasti dip the wheels?
this guy, lol
Thanks!
The factor say every 10,000 mins
I'm old school, I do every 5k miles
@@TheRealSkeptyk I'm older school. I do mine every 3k miles...😎
@@STLSNIPER ha, even better brother!
@@TheRealSkeptyk After all.. oil is cheap. Engines, not so much! I do every 3k as well.. because why not?