*Time stamps for anyone who's interested* 0:16 ZIP System in Double Walls vs Plywood 2:08 Basement Walls with Housewrap and a Vapor Barrier 3:58 Do Smart Vapor Retarders Really Work? What is the Cheapest Vapor Retarder? 7:23 Why Not Always Use a Vapor Open Air Barrier? 9:31 Insulating an Old Farmhouse
I’m a carpenter in Vancouver Canada so these videos are the bomb, wet and cold 9 months of the year and high humidity year round, really appreciate your content
9:28 Love the photo of the guy using a 1/2" corded hammer drill to set a screw in the nailing flange of the vinyl siding! Yes, you can use pan-head screws but set them in carefully with a smaller drill with a ratchet so as to not torque too tight!
I enjoy this and well as the more in-depth dives on specific topics. Quick Q&As allow for a more engagement with the audience. Both have value and you'll gave to find the ever shifting 'goldilocks' range that works for you, your community, and your team's passions and capabilities(and other factors and opportunities I may be missing.)
Would love a video(s) going over the mechanical and/or passive ventilation that is needed when we are retrofitting to a more air tight assembly and how that may differ by climate. I am in zone 2 and I see so much focus on the wall/roof details but not as much on the makeup air and keeping humidity levels controlled with an HVAC systems that is going to be running less in the more mild months. With a retrofit on a budget where someone is just doing siding, insulation, air sealing, and windows, when do you need to consider makeup air? With unlimited budget one could do an ERV + dehumidifier + swap out to a smaller HVAC system, but there has to be some more cost effective or DIY options.
This is a really important topic that I've briefly mentioned in past videos, and I certainly plan on addressing this soon. In my opinion, you always need to provide make up air if you're exhausting at a rate that places your building under negative pressures, it's non-negotiable, but the challenge is providing make up air at the right rate without increasing interior relative humidity levels in zone 2, and as you suggested you need additional dehumidification. Look at an ERV and a dehumidifier as something that must be included in part of the budget, these are essential systems. When you improve energy efficiency in a humid cooling dominated climate, you get rid of all of the incidental dehumidification benefits provided by the air conditioning since the A/C isn't running nearly as often. Have you watched these videos of mine?: ruclips.net/video/1TuRK3CI7jc/видео.html
@@ASIRIDesigns How about making a video series/ playlist broken down for each climate zone? That way everyone can get their questions answered for each climate zone? Thumbnail idea: picture of that part of the U.S., etc and then Climate Zone # written over the picture. Most people don’t know or have memorized what climate zone they are in, so maybe write something like Central Texas and Climate Zone. By doing this you could also reuse the same video editing, but maybe change some of the voice over, so it seems like it’s customized to each state, region, etc.
Should I insulate an unconditioned accessory building? With the extreme heat and sometimes freezing cold climate of North Central Texas, I am planning on insulating my tool shed with closed cell spray foam, and making a RUclips video about it. I like the idea of doing everything I can while I have the walls open for insulation, wiring, etc. rather than trying to go as cheap as possible. Hopefully this shed will help protect my tools as much as possible from the weather, moisture/vapor, etc. considering there won’t be any regular air conditioning. Just wanted to check with you first to see if closed cell foam was a good/bad idea.
Thanks mate! Not a builder really, just interested in the mechanics of this stuff i guess. Appreciate you sharing your knowledge and wishing your channel well
Excellent video packed with a lot of fast moving information. Would appreciate more detailed videos on each subject with pros, cons, good, better and best examples. Love your videos and thanks for sharing. 😁👍
Love all of your videos, they are very informative! Other than of course cost, why did you think many people seem so resistant to exterior insulation? Are the details/trades operations really that challenging to get it done right?
Thank you for your info on a very confusing topic, from Vancouver Canada. Wet, Cold, Hot, very high humidity. The go to around here seems to be Tyvec but I think that is because most builders in this area do not know or care, it is all about making big bucks. A very sad situation for the consumor/homebuyer
This is very interesting. I did not know that you don’t need siga majrex for your building if you install exterior insulation. Would it still be a good idea to install the siga majrex just in case the wall cavity does get vapor in it? Could you elaborate more on this please? Great video!
I love your channel. I’m renovating a mid century wood framed house on the barrier island Long Beach NY. It has a vented cinder block crawl space with 1’ above grade and 2’ under, with a rat slab. Due to a high water table, it’s frequently filled with water after a storm. I haven’t seen you post anything that addresses retrofitting for this condition. I was thinking to convert it to conditioned space by sealing off the vents, and adding a sump pump, but I’m interested in your ideas on how to deal with the groundwater.
Question: I live in the DFW area of Texas. I have a brand new shed I’m building, with 2x4 framing with ZipWall sheathing on the outside. I plan on installing Hardie cement lap siding with a rain screen/gap behind the siding. On the inside of the tool shed, I’m planning on applying a closed cell spray foam insulation, and then a moisture resistant drywall. The question is there any problem with applying a closed cell spray foam insulation in the stud cavities? The tool shed is not air conditioned, but I may put a portable unit out there for when I might want to work out in the 120 sq. ft. shed. I have made a couple RUclips videos so far on the concrete foundation with a 6 mil vapor barrier, and the framing of the shed so far, in case you want to see what I’m working on. I have also made a video on the Froth Pak 200 spray foam insulation kit. Probably like most people, I’m not an expert on what to do with vapor barriers. Totally used to batt insulation. I’m a remodeling contractor for 26 years. What would your advice be for my climate zone?
I'm in Ontario Canada and have a very old home but lots of character so not ready to teardown. The exterior is currently lath and plaster. I can make shiplap concrete slabs to reclad the exterior. Thinking of putting xps foam on exterior then strapping then the tiles. What should do with the roof? Do I close all the soffits and do the same foam and new sheathing and roof? If so should I gap the new sheathing from the foam? Also how thick should I go on walls and roof? I can send pics if that helps. Much thanks
Thank you so much. Because much of AZ is a hot/dry climate, there is a lot more "forgiveness" since things dry out. If I was building my home in Phoenix for example, my wall assembly would probably look something like a reinforced CMU block wall with a fluid applied water and air control layer, a couple of inches of polyisocyanurate installed outboard, and some stone veneer with an air gap. You get the benefits of a thermal mass to keep the building cooler, and the rigid insulation outboard will make sure that you slow any heat transfer (you could also use ICFs if this was cost prohibitive). Big over hangs and north facing windows if possible to reduce heat gain.
Been watching this and some of your other videos addressing vapor barrier issues/questions. Great explanations! I have an odd situation that I'm struggling to figure out: I need to enclose a porch with a 2' high brick knee-wall, brick pillars at the corners. The homeowner wants to lose as little square footage as possible, so we were thinking have the drywall against the inside face of the brick, with the framing inline on top. How do I manage insulation and vapor control, though, especially with such a porous substance as brick (climate zone 4, for reference)? I'm thinking taped foam panels (maybe ½") between the brick and drywall, then transitioning to the regular framing, OR a smart retarder like Certainteed MemBrain. Would either of those work?
It’s nearly impossible to use exterior insulation on an old farmhouse or almost any remodel for that matter. The parts you’re going to save like the decorative molding and overhangs get burried or shrunk and damage the aesthetic of the home. It’s also important to remember that if you’re not going to install the ductwork to introduce mechanical ventilation you’re better off not air sealing the home at all on the exterior because you’re asking for mold. I made that mistake on my own house when the original builder didn’t use house wrap and vinyl sided it. I had to re sheathe the whole house and used zip system and taped it well. It caused me to have to gut the interior, do mold remediation after just one year and install ductwork for an ERV, new insulation and well taped Siga Majrex because there was warm moist air from the inside leaking into the cavities around outlets and windows and behind the shower. It was a great learning experience but had I done this to a clients home I’d be sued or out of business or both.
I think the problem that most people have with regards to vapor and condensation is trying to understand how it migrates, where it condenses (which side) and its relationship to climate both internal and external. Once people understand that, all your strategies make way more sense than the simple “how do I insulate”
@@finmlpal7370 Check out the articles over at Building Science Corporation, namely this one: buildingscience.com/documents/digests/bsd-106-understanding-vapor-barriers
new build here- before we insulate with R60 blown in cellulose in the attic, would it be worth foaming around all of the top plates in the attic of the interior and exterior walls were possible? Walls are R23 mineral wool. We used OSB sheathing, zip taped, then used Benjamin obdyike hydrogap house wrap along with a horizotial furring strip rain screen for our vertical cedar shiplap. This way if any rain gets behind the siding, it will also drain behind the horizontal furring strips
I have a tricky situation and not sure which way I am going to finish my basement. New build just block foundation in Ontario Canada. High water table noticed very humid in basement and had some water come in from footings due to high water table. Outside foundation is blue skinned and xps foamed. We opted to go an interior french drain system with dimple board on interior walls into drain and seperate sump. On top of that we used roxul comfortboard over the dimplex and studded wall in front of that with roxul insulation. Rim joists are spray foamed. I feel like I would create a double Vapor barrier if I added a Vapor barrier on the studded wall and trap in moisture. Or do nothing and the dimplex sheet will condense in winter when warm indoor air hits it. I’m torn
Unfortunately I already framed my concrete basement before I watched ur video. Should I cut foam boards and place? It won’t be sealed properly with tape. Or should I just use the vapour barrier
very curious what you would say about buildling in tropical climates, where all the cooling is internal, and windows are often open for much of the day, and there's lots of humidity! i'm guessing the only option there is external insulation?
Yep! You guessed it, external rigid insulation, preferably rigid foam unless you're dealing with termites, and something to slow inwardly driven moisture installed on the outside (this could be the rigid foam itself, or a semi-permeable WRB). Wholehouse dehumidifiers are a necessity if you're opening windows. Also, non-paper faced interior finishes, as these have a higher potential to support mold growth in these climates. If you're installing drywall, I'd use fiberglass mat gypsum like Densarmor instead. Absolutely no interior vapor barriers or vapor retarders.
I'm building a house in very humid coastal region in Canada. Doing 2" taped rigid on exterior, 2x6 wall, batts in cavities, and gypsum board with paint. Debating using zip for exterior sheathing, or a plywood with blue skin WRB. Any suggestions would be helpful. Also what vapor barrier for interior? Thanks
Hi there, I’m building my house in Victoria. Just curious why not use a mineral wool for exterior insulation? Sleggs has a new product that is not Rockwool, stiffer and cheaper but same performance specs. If you are using a vapour barrier interior you might be ending up with a double vapour barrier situation and your walls will have trouble drying out.
I've never seen anyone in this area. Use the mineral wool and I am doing most of the construction myself and it seems it's harder to do the mineral wool. As far as the dryimg that's why I'm looking for suggestions
Probably not the best idea, but it's certainly possible. I'd use a thin brick installed over something like Dorken's Dry and Lath dimple mat product so that the reservoir cladding is completely uncoupled from the double wall. I don't want to challenge that double wall system in any way that could result in additional moisture accumulation.
why do you need to be more vapor open the higher your wall R value is? wouldnt one vapor permeance value suffice as long as the ratio of continuous to internal insulation is the same?
Ive got a 1940 house with oak sheathing, i planned to have Rockwool in the interior cavity but on the outside wall ive been thinking wrap tyvek and add 1" foil faced eps before my vinyl siding. Is the tyvek a problem sandwiched between the sheathing and eps? Is the eps too thin in this situation to cause more harm than good?
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
*Time stamps for anyone who's interested*
0:16 ZIP System in Double Walls vs Plywood
2:08 Basement Walls with Housewrap and a Vapor Barrier
3:58 Do Smart Vapor Retarders Really Work? What is the Cheapest Vapor Retarder?
7:23 Why Not Always Use a Vapor Open Air Barrier?
9:31 Insulating an Old Farmhouse
I’m a carpenter in Vancouver Canada so these videos are the bomb, wet and cold 9 months of the year and high humidity year round, really appreciate your content
9:28 Love the photo of the guy using a 1/2" corded hammer drill to set a screw in the nailing flange of the vinyl siding! Yes, you can use pan-head screws but set them in carefully with a smaller drill with a ratchet so as to not torque too tight!
I enjoy this and well as the more in-depth dives on specific topics. Quick Q&As allow for a more engagement with the audience. Both have value and you'll gave to find the ever shifting 'goldilocks' range that works for you, your community, and your team's passions and capabilities(and other factors and opportunities I may be missing.)
thank you, love the new Q&A format with in-depth analysis of the control layers
I would definitely be interested in a video explaining the issues with airtight gypsum!
This video answered all my questions I still had about vapor barriers. Awesome!
So glad to hear it! Anything else you want to see in the future?
Would love a video(s) going over the mechanical and/or passive ventilation that is needed when we are retrofitting to a more air tight assembly and how that may differ by climate. I am in zone 2 and I see so much focus on the wall/roof details but not as much on the makeup air and keeping humidity levels controlled with an HVAC systems that is going to be running less in the more mild months.
With a retrofit on a budget where someone is just doing siding, insulation, air sealing, and windows, when do you need to consider makeup air? With unlimited budget one could do an ERV + dehumidifier + swap out to a smaller HVAC system, but there has to be some more cost effective or DIY options.
I would like to hear your thoughts on this too
This is a really important topic that I've briefly mentioned in past videos, and I certainly plan on addressing this soon. In my opinion, you always need to provide make up air if you're exhausting at a rate that places your building under negative pressures, it's non-negotiable, but the challenge is providing make up air at the right rate without increasing interior relative humidity levels in zone 2, and as you suggested you need additional dehumidification. Look at an ERV and a dehumidifier as something that must be included in part of the budget, these are essential systems. When you improve energy efficiency in a humid cooling dominated climate, you get rid of all of the incidental dehumidification benefits provided by the air conditioning since the A/C isn't running nearly as often. Have you watched these videos of mine?: ruclips.net/video/1TuRK3CI7jc/видео.html
@@ASIRIDesigns How about making a video series/ playlist broken down for each climate zone? That way everyone can get their questions answered for each climate zone? Thumbnail idea: picture of that part of the U.S., etc and then Climate Zone # written over the picture. Most people don’t know or have memorized what climate zone they are in, so maybe write something like Central Texas and Climate Zone. By doing this you could also reuse the same video editing, but maybe change some of the voice over, so it seems like it’s customized to each state, region, etc.
Should I insulate an unconditioned accessory building? With the extreme heat and sometimes freezing cold climate of North Central Texas, I am planning on insulating my tool shed with closed cell spray foam, and making a RUclips video about it. I like the idea of doing everything I can while I have the walls open for insulation, wiring, etc. rather than trying to go as cheap as possible. Hopefully this shed will help protect my tools as much as possible from the weather, moisture/vapor, etc. considering there won’t be any regular air conditioning. Just wanted to check with you first to see if closed cell foam was a good/bad idea.
Thanks mate! Not a builder really, just interested in the mechanics of this stuff i guess. Appreciate you sharing your knowledge and wishing your channel well
Love the Q&A format. Keep them coming.
Excellent video packed with a lot of fast moving information. Would appreciate more detailed videos on each subject with pros, cons, good, better and best examples. Love your videos and thanks for sharing. 😁👍
Really enjoyed the Q&A, very informative, thanks!
Love all of your videos, they are very informative!
Other than of course cost, why did you think many people seem so resistant to exterior insulation? Are the details/trades operations really that challenging to get it done right?
Thank you for your info on a very confusing topic, from Vancouver Canada. Wet, Cold, Hot, very high humidity. The go to around here seems to be Tyvec but I think that is because most builders in this area do not know or care, it is all about making big bucks. A very sad situation for the consumor/homebuyer
Yup, multimillion dollar houses with Tyvek and no exterior insulation everywhere.
I like the format. Keep up the good work.
This is very interesting. I did not know that you don’t need siga majrex for your building if you install exterior insulation. Would it still be a good idea to install the siga majrex just in case the wall cavity does get vapor in it? Could you elaborate more on this please? Great video!
I'm glad you confirmed how I did my basement insulation lol, I copied Joe's system!
Great video. Answered some things I have been wondering.
I love your channel. I’m renovating a mid century wood framed house on the barrier island Long Beach NY. It has a vented cinder block crawl space with 1’ above grade and 2’ under, with a rat slab. Due to a high water table, it’s frequently filled with water after a storm. I haven’t seen you post anything that addresses retrofitting for this condition. I was thinking to convert it to conditioned space by sealing off the vents, and adding a sump pump, but I’m interested in your ideas on how to deal with the groundwater.
Question: I live in the DFW area of Texas. I have a brand new shed I’m building, with 2x4 framing with ZipWall sheathing on the outside. I plan on installing Hardie cement lap siding with a rain screen/gap behind the siding. On the inside of the tool shed, I’m planning on applying a closed cell spray foam insulation, and then a moisture resistant drywall. The question is there any problem with applying a closed cell spray foam insulation in the stud cavities? The tool shed is not air conditioned, but I may put a portable unit out there for when I might want to work out in the 120 sq. ft. shed. I have made a couple RUclips videos so far on the concrete foundation with a 6 mil vapor barrier, and the framing of the shed so far, in case you want to see what I’m working on. I have also made a video on the Froth Pak 200 spray foam insulation kit. Probably like most people, I’m not an expert on what to do with vapor barriers. Totally used to batt insulation. I’m a remodeling contractor for 26 years. What would your advice be for my climate zone?
I'm in Ontario Canada and have a very old home but lots of character so not ready to teardown. The exterior is currently lath and plaster. I can make shiplap concrete slabs to reclad the exterior. Thinking of putting xps foam on exterior then strapping then the tiles. What should do with the roof? Do I close all the soffits and do the same foam and new sheathing and roof? If so should I gap the new sheathing from the foam? Also how thick should I go on walls and roof? I can send pics if that helps. Much thanks
Love the content. What about hot Arizona climate, with cold air conditioned interiors, whats the ideal wall assembly?
Thank you so much. Because much of AZ is a hot/dry climate, there is a lot more "forgiveness" since things dry out. If I was building my home in Phoenix for example, my wall assembly would probably look something like a reinforced CMU block wall with a fluid applied water and air control layer, a couple of inches of polyisocyanurate installed outboard, and some stone veneer with an air gap. You get the benefits of a thermal mass to keep the building cooler, and the rigid insulation outboard will make sure that you slow any heat transfer (you could also use ICFs if this was cost prohibitive). Big over hangs and north facing windows if possible to reduce heat gain.
Been watching this and some of your other videos addressing vapor barrier issues/questions. Great explanations!
I have an odd situation that I'm struggling to figure out: I need to enclose a porch with a 2' high brick knee-wall, brick pillars at the corners. The homeowner wants to lose as little square footage as possible, so we were thinking have the drywall against the inside face of the brick, with the framing inline on top. How do I manage insulation and vapor control, though, especially with such a porous substance as brick (climate zone 4, for reference)? I'm thinking taped foam panels (maybe ½") between the brick and drywall, then transitioning to the regular framing, OR a smart retarder like Certainteed MemBrain. Would either of those work?
this is great! thank you
It’s nearly impossible to use exterior insulation on an old farmhouse or almost any remodel for that matter. The parts you’re going to save like the decorative molding and overhangs get burried or shrunk and damage the aesthetic of the home. It’s also important to remember that if you’re not going to install the ductwork to introduce mechanical ventilation you’re better off not air sealing the home at all on the exterior because you’re asking for mold. I made that mistake on my own house when the original builder didn’t use house wrap and vinyl sided it. I had to re sheathe the whole house and used zip system and taped it well. It caused me to have to gut the interior, do mold remediation after just one year and install ductwork for an ERV, new insulation and well taped Siga Majrex because there was warm moist air from the inside leaking into the cavities around outlets and windows and behind the shower. It was a great learning experience but had I done this to a clients home I’d be sued or out of business or both.
Do you recommend taped rigid insulation for wood foundations?
I think the problem that most people have with regards to vapor and condensation is trying to understand how it migrates, where it condenses (which side) and its relationship to climate both internal and external. Once people understand that, all your strategies make way more sense than the simple “how do I insulate”
what is a good video or website to understand this?
@@finmlpal7370 That’s just it, if ASiRI is doing Q&A, this is a good topic for him to dive deeper into.
Great point, we might need to do a general crash course at some point.
@@finmlpal7370 Check out the articles over at Building Science Corporation, namely this one: buildingscience.com/documents/digests/bsd-106-understanding-vapor-barriers
new build here- before we insulate with R60 blown in cellulose in the attic, would it be worth foaming around all of the top plates in the attic of the interior and exterior walls were possible? Walls are R23 mineral wool. We used OSB sheathing, zip taped, then used Benjamin obdyike hydrogap house wrap along with a horizotial furring strip rain screen for our vertical cedar shiplap. This way if any rain gets behind the siding, it will also drain behind the horizontal furring strips
I have a tricky situation and not sure which way I am going to finish my basement. New build just block foundation in Ontario Canada. High water table noticed very humid in basement and had some water come in from footings due to high water table. Outside foundation is blue skinned and xps foamed. We opted to go an interior french drain system with dimple board on interior walls into drain and seperate sump. On top of that we used roxul comfortboard over the dimplex and studded wall in front of that with roxul insulation. Rim joists are spray foamed. I feel like I would create a double Vapor barrier if I added a Vapor barrier on the studded wall and trap in moisture. Or do nothing and the dimplex sheet will condense in winter when warm indoor air hits it. I’m torn
Thank you!
Thanks for watching!
Unfortunately I already framed my concrete basement before I watched ur video. Should I cut foam boards and place? It won’t be sealed properly with tape. Or should I just use the vapour barrier
very curious what you would say about buildling in tropical climates, where all the cooling is internal, and windows are often open for much of the day, and there's lots of humidity! i'm guessing the only option there is external insulation?
Yep! You guessed it, external rigid insulation, preferably rigid foam unless you're dealing with termites, and something to slow inwardly driven moisture installed on the outside (this could be the rigid foam itself, or a semi-permeable WRB). Wholehouse dehumidifiers are a necessity if you're opening windows. Also, non-paper faced interior finishes, as these have a higher potential to support mold growth in these climates. If you're installing drywall, I'd use fiberglass mat gypsum like Densarmor instead. Absolutely no interior vapor barriers or vapor retarders.
@@ASIRIDesigns awesome. thank you very much!!
actually wait. why a semi permeable WRB? something non permeable like aluminaflash not a good option?
@ASIRIDesigns sorry am I follow up on this? Is a non perm like alumaflash a bad idea?
Can you put fluid barrier (cat 5) over top of zip wall sheathing? I live in hurricane alley. Trying to go above and beyond.
I'm building a house in very humid coastal region in Canada. Doing 2" taped rigid on exterior, 2x6 wall, batts in cavities, and gypsum board with paint. Debating using zip for exterior sheathing, or a plywood with blue skin WRB. Any suggestions would be helpful. Also what vapor barrier for interior? Thanks
Hi there, I’m building my house in Victoria. Just curious why not use a mineral wool for exterior insulation? Sleggs has a new product that is not Rockwool, stiffer and cheaper but same performance specs. If you are using a vapour barrier interior you might be ending up with a double vapour barrier situation and your walls will have trouble drying out.
I've never seen anyone in this area. Use the mineral wool and I am doing most of the construction myself and it seems it's harder to do the mineral wool. As far as the dryimg that's why I'm looking for suggestions
would it be possible to pair a brick facade with a double wall assembly?
Probably not the best idea, but it's certainly possible. I'd use a thin brick installed over something like Dorken's Dry and Lath dimple mat product so that the reservoir cladding is completely uncoupled from the double wall. I don't want to challenge that double wall system in any way that could result in additional moisture accumulation.
why do you need to be more vapor open the higher your wall R value is? wouldnt one vapor permeance value suffice as long as the ratio of continuous to internal insulation is the same?
Ive got a 1940 house with oak sheathing, i planned to have Rockwool in the interior cavity but on the outside wall ive been thinking wrap tyvek and add 1" foil faced eps before my vinyl siding. Is the tyvek a problem sandwiched between the sheathing and eps? Is the eps too thin in this situation to cause more harm than good?
Mid missouri climate,
We see a lot of joist pockets with problems with trapping moisture.
Can you consult in Canada?