The Perfect Wall Explained with Examples
HTML-код
- Опубликовано: 14 июн 2024
- We explore the perfect wall concept and share examples of a floor, wall, and ceiling installation on a Passive House.
@LGSquared shows us how to design the perfect wall, and @SawHorseDesignBuild demonstrates how to install it under the slab and on the walls/ roof.
00:00 What is the "perfect wall?"
08:44 Example of below slab insulation and vapor barrier
15:21 How to install ROCKWOOL on an exterior wall and roof
22:10 Uninterrupted control layers in the perfect wall assembly
For more information on this product, visit:
www.rateitgreen.com/green-bui...
Don't forget to subscribe to Rate It Green on RUclips:
ruclips.net/user/RateItGreen...
We'd love for you to follow us on these other platforms as well.
Twitter / rateitgreen
Facebook / rateitgreen
LinkedIn / rate-it-green
Newsletter mailchi.mp/7cb936376be3/stay-...
Connect with us if you would like more information on Rate It Green as a member or Sponsor or have a product you would like to share without other Rate It Green members.
If you have a green product that you would like to introduce to our members' contact:
LI (Matt Hoots) / matthoots
To learn more about the features and benefits of RateItGreen.com, contact:
LI (Allison Friedman) / allisontfriedman 
Хобби
Cool...next do the affordable wall. 😂
I think it's great. I studied the diagrams. Prevent dew point from being on surface of sheathing. Cover house in a blanket.
The main issue is the cost. I wish it were affordable.
Got it. Frame up two houses, one inside the other.
haha sorta. the outer layer isn't structural, it's just the blanket. the inner wall is structure only, not insulating.
Meanwhile my 100 year old house has no insulation ☹
Fantastic video.
I have read many articles by Prof. Lstiburek. As he says wood burns and rots.
I am an architect i Europe and in practice we do Perfect Wall without using wood. The main wall is brick. And the cladding is attached to aluminum studs. The insulation is always mineralwool. As a finish we use Knauf Aqua white cementous Panel.
I'm designing a house in australia and we have very different climate criteria but I'm also looking at a masonry structure with cementitious exterior cladding. Essentially it sounds like you are talking about what we would call "reverse brick veneer" but was surprised by your "aluminum studs". Do you just mean metal studs that hold the insulation layer? I imagine that would be worse for thermal bridging...
Solid masonry walls aren’t possible in a lot of US- earthquakes or even shifting soils. Need more flexibility in structure.
Wow!
I think I will just wear an extra shirt.
Nice passive vent system for radon. Is there a low level air-in pipe, as I imagine it needs to pull from somewhere to work efficiently?
Excellent content I can’t wait for better audio on future videos
Hybrid designs are becoming more popular using a combination of materials and purposeful layers. Efforts are made to prevent thermal bridging across structural supports, all while not sacrificing living space.
We try to keep moisture going outward in our timber frames. People don't understand how much moisture builds in a house. Block walls we core with vermiculite, mineral wool batts and board, low perm air barrier, air gap, and masonry veneer. Wall ties for masonry veneer hold the mineral wool.
Wow. Awesome. What fastener manufacturer are those 12" Galvy screws? Also, Is there a chart somewhere that says the minimum of exterior rockwool to use based on location?
Home Depot sells for more than $1 each
Which brand or type of long screws did you use for the exterior wall and roof?
I thought Zip Systems’ outer green membrane is 13 perms, whereas the OSB underneath is 1-3 perms. Doesn’t that make your OSB your vapor control layer? It’s okay in winter, when the OSB is hot, and the hot humid air leaks out into the rock wool, because rock wool doesn’t mind being wet/humid. But in summer, the Zip OSB will be as cold as the interior air conditioning, and Zip System will allow humid outside air to contact the cold OSB. Is 13 perms enough to prevent the OSB from getting too moisture saturated? Are you expecting drying to the interior through the OSB to keep it dry in summer?
How can we apply these concepts in a renovation context? Is it possible to do this without redoing the frame itself?
Interesting that you can run the Rockwool and furring right down to grade with no drip edge, nothing. Definitely not code in the majority of the country.
I thought the same.. super weird. Building 101 is get wicking materials off the floor
@@1stkeyhomebuyers Rockwool doesn't wick moisture
@@srchubz ...maybe... But have it sitting in it
Why not just use SIPs???
what are the furring strips and rockwool resting on to prevent wicking and bug entrance?
I believe that rockwool acts as it’s own big screen. The fiber shreds any exoskeleton on bugs. Not sure on that so do your own due diligence
How are you ensuring the furring strips are evenly fastened? (i.e. a flat surface across the entire wall assembly for the cladding and not compressing the mineral wool potentially reducing it's effective r-value?)
String lines
Not sure if this is a dumb question but would the concrete slab crush the Rockwool insulation underneath and compromise its insulation rating?
nope, the comfortboard is pretty dense and there are different ratings for it. where he talked about comfortboard 80, he quickly mentioned comfortboard 110 under the slab. when weight is distributed evenly you can load quite a bit on top of that rockwool
@@janoserdelyi9879 Good to know, thanks!
definatley rigid on the bottom foot or 2 feet instead of that, you can see the water being absorbed from the ground. Or vapour barrier rapped around the front of it when drainage to the back.
A 2 foot thick Cob wall sounds less expensive
I dont understand. Build a cinder block wall seal the outside and build a 2nd cinder bolck two ft from the first and fill with dry sand. Low tech, all materials are available in bulk and great thermal properties. What am i missing?
Interesting idea but if you fill the cavity make sure no rain or moisture gets in there, also check the r-value of two ft of sand plus cinder block; Probably ok but not great. Lastly, better use some next level wall ties to stop the wall from bursting apart!
rockwool doesn't burn but what about wood studs 😅.....
how expensive were those 12" screws? good grief
isn't it radon is radioactive? 🤔🤔🤔
So thermal bridging and barrier pentation every time you install a 12" screw that is super conductive and a water channel. Awesome
It is difficult to put together a wall assembly without at least minimally conductive elements penetrating through the insulation. Not crazy about some of the elements in their wall assembly but the principal of building the envelope outside of the structure is spot on. Not only does it keep the structural elements at a relatively consistent temperature and humidity, it is far easier to execute a good quality envelope building layers from inside to out, entirely from the exterior.
@@bopodoq3069 I agree that the method is far superior to 2x4 or 2x6 construction with void insulation. The video is called the perfect wall...which this is not.
I my opinion the most perfect wall construction method currently is ICF. It’s still not perfect but it’s the best I have found so far.
What would you do differently?
How would you improve it?
I'm planning to use 2x ledger boards attached to the sheathing to eliminate any continuous thermal bridging, and as a bonus it will provide a much larger target for the screws used to attach the furring strips. I'll just add another 1-1.5" of insulation to compensate.
I'd just use Zip-R12 and skip all the freakin labor intensive detail of mineral wool and furring strips with window buck extensions etc. The more wall insulation you add after R-30 (Zip R-12 plus closed cell between 2x4 studs) the more you have diminishing returns of cost to build/energy consumption. With this method, your wall thickness will be the same as if using 2x6 studs and windows will fit without custom extensions.
You can build something like R-50 walls and triple pane windows but you'll never see a positive energy return compared to the cost of this build method unless you live above the arctic circle.
Design your house with large roof overhangs and you eliminate a great deal of water intrusion problem areas, especially around windows. You also reduce thermal gain with less direct sunlight coming through glass. Eliminate roof valleys and you'll have less chance of water damage.
You can spend as much as you like with complicated mineral wool over regular sheathing (OSB or plywood) but you won't get it back when you sell. The dream of spending the rest of your days in your home applies to very few.
I think it's foolish to overbuild to this extent. The high R-values literally go out the window with new home owners wanting many large window panes, which are around R-3 or spend a lot more to get R-5+ triple pane glass. Investing is a super duper insulated home is not an investment.
10 years from now, this will all be different. Also, wouldn't the homeowner have gotten off cheaper by insulating with bales of dollar bills?
promo sm
I think that much Rockwool is overkill. Just look at the sample they set on fire with a device inside the rockwool built house (19:20). Its not a 6 to 12 inch thick wall, and probably only 1.5 to 2 inch thick. So having this in mind the heat wont penetrate through the 1.5 to 2 inch and keeps the humidity on the outside if that is a concern and then space between the sheathing and rockwool should be in balance (not fluctuating in temp).
The figures don't lie. The more insulation, the less watts of energy needed to heat or cool the house. Properly built Passive is way more energy efficient and therefore far cheaper in the long run.
I do not believe this system would work in a high wind application where we deal with140 and 150mph wind.
The voce made a false statement that wall system is good for cold climate, for Texas and Florida you have to put vapor barrier on outside
Skip ALL this and go with ICF. Alot quicker to install the same or more insulation value overall and it doubles as an air barrier. Couple with an ERV and foamed roof and you control the air ten times better. Good friend has 4500 sqft house and his entire utility bill (gas, elec, and water) in the middle of the Oklahoma summer was less than 200.
No way to make a perfect wall if you are using Zip as water control
Stick framed walls have to be the most unnecessarily complicated, weak, and expensive way to build a house. Instead of wasting time in outdated technology originally developed to build cheap homes after WWII, how about further developing and building ICF, ICCF, insulated CMU, 3D printed homes?
Wood framing is still sustainable and captures carbon, unlike concrete products which have a huge environmental impact. Wood framing also allows for greater customization. And if you're familiar with it then it's not complicated.
Municipal building inspections and approvals do not know what to do with an ICF house, and won't approve building permits, making the standard stick framing an attractive option to builders that want to make money. Sad = true.
Agreed, ICF systems are superior on many levels.
"This promotion is brought to you by, the national ICF dealers and installers association...."
ICF is expensive as hell
The perfect wall isn't made with wood
It can be built with a variety of materials, including wood.
main building material wood have worst material build wall. not perfect newer can do. need use hollow block and lot more insulation.