How to Fix a Broken Laptop Hinge - The easy way :)
HTML-код
- Опубликовано: 13 авг 2017
- Ebay store: www.ebay.co.uk/usr/sorinelect...
WebSite: sorinelectronics.com/
Patreon support: / electronicsrepairschool
RUclips Members: / @electronicsrepairschool
Forum: forum.sorinelectronics.com/
Discord: www.sorinelectronics.com/discord
My tools: www.amazon.co.uk/shop/electro...
PayPal me: www.paypal.com/paypalme/Elect...
I cannot express my gratitude enough. I have 17" version HP m7-j020dx. Great latptop..But left hinge, the hinge is still attached but when you open it if you don't hold the back with fingers, the silver top with keyboard separates from the top, so I have to buy new hinge (five dollars US), take bottom of hinge replace original bottom and then I can do what you just did. I thought I was going to lose this wonderful laptop, watched many videos they do sort of same thing but make it so hard, slow and complicated. You take all the mystery out and make it fun which it should be. Ordering hinge and glue next week, will send you a very warm thank you and hug for telling me '"easy fiix" every other video says " very hard complex fix", I am so grateful to you, if it wouldn't cost so much in shipping I would pay you to do it but good for me to keep learning. Thank you subscribing and I fix about 5 desktops a week, if customer is family I know and very very poor, I do not charge them must have compassion, maybe in a few months watching you I can also start fixing laptops, but this is my own and I am loving it, still works great but needs to be solid again. Thank you, will write again soon.
I wish I had seen this video earlier. You're genius man! I heated a small screw and forced it through the hole. The heat melted the plastic and went through. It was sufficient to give support but I also applied epoxy for support.
Thank you for the tip, I once had the same problem with a HP too. I opened it up, and glued the hinges with commercial super glue. I don't know for how long, but it works :D
But I've got another laptop from 2007, and it doesn't have hinges anymore. They were screwed on a base, but the base bended so much that it broke, so I'm doing my best to solder pieces of steel and screw it again. I also unjamed the hinges, and I hope it will work. Still waiting for the glue I bought to a Chinese supplier, I hope it will work. I chose a flexible kind of glue. It's a Fujitsu Siemens Amilo, I saw you fixed a laptop like this a while ago. It's the same model.
Great vid, thanks!
You always add skills in our heads Sir,I salute you
Very nice. Thank you so much Mr. Sorin
Dude like The fix... I face a similar issue however it's The hinge from The monitor's side and this was very helpfull
Hello sir! I just want to know if we can still removed the top cover just in case we need to do something in the future? or is it forever in there. Thank you very much for answering. God Bless and keep safe.
You are a genius!
sir it was an nice repearing process but after , how do you manage to reopen and dissasseble the screen on later when it is needed ??
hello. hot glue is basic. So basic that I never thought to use it for this application. Great idea. Nothing like thinking outside the box for a change. Thank you.
Wow you just saved my money. Thanks for that video.That was very impressive. I am going to watch your other videos too.
U r welcome :)
Jeez Sorin, that is an impressive repair considering how bad the hinge was to start with, i have previously used Gorilla Glue which has worked well but the repair takes ages to set and you have to be careful with the glue as it expands quiet a lot, you really need to clamp the hinges which can be a problem some times, i will try hot glue the next time, if it works out as well as yours i'll be well pleased. I'm looking forward to your live stream, can you please inform us in advance as to when you'll be doing it, really appreciate all the great videos & advice you share with us, its invaluable. Thank you
true, the hot glue looks the business Sorin, another invaluable tip, many tanx again
Is this just a standard glue stick or something stronger?
You forgot to install one screw so great job! I always have at least a couple left over.
how many time time glue is fix hinge and top side in the glue ?
What happens when the laptop gets hot? In the car, summer, etc. I did the same, but with E6000/Goop/Shoe Goo. Works great . I opened my HP Envy 15, and discovered that all of the risers had crumbled, leaving the screw inserts floating around in the chassis. Not enough left to do anything with. Here's what I did: I disassembled the laptop, and I cleaned it out really thoroughly. Then, I put GOOP/E6000 in the places where the hinges laid flat. Then, I put the small screws into the holes that they originally were in, and added more E6000 on top of the screws. Then, I attached the bottom, and I pushed the screws into the glob of adhesive. Basically, glued that area of the bottom to the chassis. Tried to avoid the moving areas, and left it, closed, lid down, to dry for 24 hours. 72 hours is even better, but I have a lot of experience with E6000, and I could feel that it was set enough to handle. This repair WORKED! But, you have to use some common sense while doing it.
Hi! That was very clever of you using the "magic plastic stick"! Do you use it doing other repairs? Very useful vid, thanks a lot!
Thank you, yes, i'm using hot glue even for straightening the microusb charging ports, or rebuilding the chargers connector, or laptop charging ports
But is the plastic stick a glue stick or is it just melted plastic which you giving it shape? Thanks Sorin!
its hot glue, not plastic!!! en.wikipedia.org/wiki/Hot-melt_adhesive
Electronics repair school got it, thanks a lot! I will look it up.
Could I use the heat gun that comes with the stick? Is it as effective as your adjustable heater?
top tier channel I'm glad I found it
I always have problem fixing hinges but i think this method of using hot glue is a better option. Thank you sir.
Amazing...I trust you :)
I'll try for the first time this technique
Sorin, I noticed you did not reconnect the black WiFi cable ...
Is the top cover (the Palmrest) "glued" there forever? Can it be opened again?
No , its not. In conclusion, you should wait for the hot glue to dry up. Then install the top side.
hi. what kind of usb charger with display do you use? where to buy?
Hi, check on ebay for 'oled usb power meter'
the top
what glue stick did u use sir. make and where is it available online
Please check ebay for hot glue bars
Got it Sorin God Bless man!
i will thanks a lot!
ps, did not know you fix cellphone. I have Motorola Moto G3 3rd generation, wonderful phone, about 5 months ago earpiece not so good anymore, have to use speakerphone. Then I notice a little bit of screen burn in...but still worked except for earpiece. Then two days ago I power full, turn on , it shows the login screen , a big M doing stuff while it loads up, but then screen goes black. I see the burn in part with a bit of light coming through so the phone is on, takes full charge, but watched every video did every trick, did not work. Perhaps you have a video about screens going black but phone still works however if I cannot see desktop on phone, then I cannot find contacts and make a phone call. I watched one video that said it was the motherboard maybe some light failed and could not light up whole screen, another video said take totally apart and replace with new battery (it does get a bit hot) , but I do not know anything about fixing cell phones, however I can follow any instructions so if you have a video of this or if you have any thoughts, I will send you my email and maybe you could help. I cannot afford a new phone right now. Thank you for latch video and hope I learn what is wrong with phone so I can fix it...Glen
Hello for Greece .Whit drimeal . Litle hole put skew long take for the laptop . :)
Hello. Please, put (make available) caption in Portuguese. Thanks.
what is the charge for a repair like this?
£40-60 depends of the complexity
After fitting Hinges not showing you. Please show how it fitting
What if the laptop is still working but one hinge's cables are not connected anymore?
Plus is it possible to be the connectors of the keyboard and the wifi detector?
My laptop is still working but some letters in the keyboard isn't working anymore and the wifi is not connecting anymore too.
wow!
Tell us , At what time do you come online lesson ,, then we can join with you, please tell the time as GMT , i'm from sri lanka, Thanks
saturday, 11 am uk time
will be hell to open up the laptop next time it has a problem
its jst look like nothing is broken
kitne ka aaye ga base or hinge dell
sir hot glue is ok but after some times it will brk. i hv some better solution for this typ of problems i will send you some pictures in your mail. its my own technique
could you show me what you use
Kindly send me to plzzzz
legendyou1990@gmail.com
me too plz mdazcorp@gmail.com
Please share your technique @ btech.varun@hotmail.com
The simplest way to fix a laptop hinge is to (a) find one of those file folders with the metal strips on the top edge, and (b) velcro strips with an adhesive that you peel off. Cut out the metal strip, stick one half of the velcro on both ends of the strip, stick the 2 opposite halves on the edge of the screen and one the side of the keyboard. Attach both velcro halves together on the laptop and metal strip so it acts as a brace to hold the screen up. Problem solved
Could you show a pic of this or something. Sounds interesting
WHAAAAAT ???? =]]]] , that owner are insane
Mickey Mouse job...Thats how us Mexicans call those kind of jobs...
My laptop was dead no power and my father does not fix it
should the laptop over heat and melt the glue from normal use? lol
easy but WRONG - 1. you should fix the main problem "old hinges" - of course it means more complicated repair due to second side in display lid and cca $10 for pair of them. 2. hot glue is temporary solution, it will last max one year, next time you shoud use epoxy resin for higher temperatures.
Good fix for yourself. It is a "crime" to do like that for customer. You should fix cause of problem - replace hinges and set them. After that you glue and everything should work for much longer !
We have the same laptop, and this ish ain't easy! 😐🤔😤😢😟😭😡🤬😠
Ok we have the same laptop
If you wondering how I fixed it, check it out on my channel.
He repairs others laptop and he has laptop repairing course
why do i think he is speaking like russiens ??
hello Sir, this is a verry remarkeble repair. i looked 2 times at this video an i love it.
you are a verry good craftsman, a man who loves his job, A man who knows how to help himself and shows others how to do it. thank you for charing your knowlege.
now i am gonna repair the hinge of my laptop and i wil tell you if i dit a good job.
god bles you and your family.
i subscribet:
Thank you