Dam..whoever the mfr of this machine is..I wanna give them major props for an outstanding process (going back in reverse) and for a top notch finish...almost right there w/ the kings of polished aluminum..Billet Specialties..
AMMachinerySales Autopulit is the mfr..yea.went on their channel just a couple of minutes ago..and they got a really nice platform going..guess they are located in Spain..pfft..they should come to the U.S...they would make a killing out here..18 wheeler guys would be lined up big time to get their wheels..gas tanks..etc..done by these guys..I was really impressed with them..))
+gdub454 They are here in USA. We build and install machines in USA form our factory in Spain all the time. I am USA based and work only here for the company.
Well., now i know why polished rims come from factory warped., bet those puppies are +380f when done., no need to run polisher @12,000rpm., all you do is warp them... you only need 6,000 rpm to get the exact same shine but you dont warp a rim... as a trucker it sucks going from alcoas to polished because you have to ad a shit load of weights pluss a ballance bag in the tire.
Heat can be an issue but these machines do not run at high RPM. The wheels are removed from the machine by hand when done. And while they are warm they are not too hot to handle by hand.
Aquí en Guadalajara yo los pulo con ruedas con esmeril y después con tipos de manta les saco asta los golpes de piedra. En una máquina con motor de 10 caballos
Hand polishing is an art more than any thing else. It takes skill and time to become good at it. Machines help ease the wear and tear on people as polishing is not easy work and can be very dangerous. An experienced polisher is the best person to run these machines.
Yeah, It did an awesome job on the smooth surfaces of this wheel, but what about the wheels that have ridges and other tight areas where this buffer wheel can't reach!
El pulido automático está muy bien pero como es Manuel no hay nada yo soy pulidor manual y te puedo pulir cualquier cosa que me dé desde un horno industrial a unos pendientes de mujer el pulido manual no tiene comparación cualquier fallo que tenga la pieza puedes parar y arreglarlo con la automática tienes que hacer todo el ciclo de nuevo un saludo desde Barcelona
You are correct by hand any thing can be done. The problem is hand polishing is an art as much as it is work. The body is not happy hand finishing large parts and there are many injuries. Automatic is good when you have many of the same part to do. A person who knows how to polish makes the very best person to operate this type of machine. It saves your body and you still get to apply your talent for longer period and be healthier. Cutting injury and getting a more consistent flow of parts is a big advantage.
Autopulit builds some of the best polishing machines. Wheels, truck grills, Knee joints you name it.
whats the cost
do you deliver in texas
your masine prize please
Dam..whoever the mfr of this machine is..I wanna give them major props for an outstanding process (going back in reverse) and for a top notch finish...almost right there w/ the kings of polished aluminum..Billet Specialties..
+gdub454 Autopulit is the MFG of the machine. We build the polishing machines for many of the major wheel makers.
AMMachinerySales
Autopulit is the mfr..yea.went on their channel just a couple of minutes ago..and they got a really nice platform going..guess they are located in Spain..pfft..they should come to the U.S...they would make a killing out here..18 wheeler guys would be lined up big time to get their wheels..gas tanks..etc..done by these guys..I was really impressed with them..))
+gdub454 They are here in USA. We build and install machines in USA form our factory in Spain all the time. I am USA based and work only here for the company.
AMMachinerySales
oh ok..cool..thats good to hear..
THE BEST YET I LIKE THIS machine
www.ammachinerysales.com
It is an automated machine for wheel production
Holy smokes that's awesome !!!
How much for this machine??
Now that’s a polisher
Well., now i know why polished rims come from factory warped., bet those puppies are +380f when done., no need to run polisher @12,000rpm., all you do is warp them... you only need 6,000 rpm to get the exact same shine but you dont warp a rim... as a trucker it sucks going from alcoas to polished because you have to ad a shit load of weights pluss a ballance bag in the tire.
Heat can be an issue but these machines do not run at high RPM. The wheels are removed from the machine by hand when done. And while they are warm they are not too hot to handle by hand.
i want that machine!beautiful shine.
How much does this wheel polisher cost and how much will the one to sand and repolish
Why didn't the machine polish the face of the wheel? As shown at 4:48? Is it because the wheel is going in the front for steering?
This was for demonstration only. It can do the face it is just not shown here.
@@AMMachinerySales can machine polish semi truck wheels as well as regular car wheels?
@@piotrgaudynek3661 The design of this machine is more for commercial wheels much like Alcoa. Singles and super singles are possible.
Must sound great
Aquí en Guadalajara yo los pulo con ruedas con esmeril y después con tipos de manta les saco asta los golpes de piedra. En una máquina con motor de 10 caballos
que tal chuyin? fabricaste tu maquina? que tanto te cuesta? estoy interesado en una igual...
cuanto es el costo de esa maquina
Na no ay nada mejor que aserlo yo mismo eso es sólo brillo y queda mucho detalle soy pulidor de interiores de aviasion esto nos me sirve gracias
Hand polishing is an art more than any thing else. It takes skill and time to become good at it. Machines help ease the wear and tear on people as polishing is not easy work and can be very dangerous. An experienced polisher is the best person to run these machines.
Where to get one?? in Canada Ontario
What is the cost of this machine? How is the rogue applied?
The machines are not off the shelf and are built to you spec. Compound is done via spray guns.
Yeah, It did an awesome job on the smooth surfaces of this wheel, but what about the wheels that have ridges and other tight areas where this buffer wheel can't reach!
For deep wheels or to do the face there is another tool that is fitted. The entire wheel can be done.
There ya go smart a$% 😁😁😁😄
You have for sale in USA. This machine
Yes, they are built to order to fit with the diameter and width you need. sales@ammachinerysales.com
Donde puedo comprar una maquina de esas
awesome !
AWESOME!!!
WHAT compound is used ?
spit!
Where to get one??
They are built around what you need so I would need info on your situation to get you details.
El pulido automático está muy bien pero como es Manuel no hay nada yo soy pulidor manual y te puedo pulir cualquier cosa que me dé desde un horno industrial a unos pendientes de mujer el pulido manual no tiene comparación cualquier fallo que tenga la pieza puedes parar y arreglarlo con la automática tienes que hacer todo el ciclo de nuevo un saludo desde Barcelona
You are correct by hand any thing can be done. The problem is hand polishing is an art as much as it is work. The body is not happy hand finishing large parts and there are many injuries. Automatic is good when you have many of the same part to do. A person who knows how to polish makes the very best person to operate this type of machine. It saves your body and you still get to apply your talent for longer period and be healthier. Cutting injury and getting a more consistent flow of parts is a big advantage.
AM Machinery Sales how much does it cost please send me a quote thank you fdonet83@gmail.com
@@AMMachinerySales v
Merhaba bu makine kaç dolar lütfen bilgi verirmisiniz tesekkurler
che meraviglia
how much is it?
HMMM...I gotta Get Me One Of Them Fo Show
Saudi arbia machine prize please
Awesome!
así es k me gustan los. aros
ليس له مثيل
Quiero pulidor para rines de ierro pará cromar
What’s the price for this set up?
Its built around your need. Be it one at a time finishing or many at a time so I would need detail about your need to get you info.
I was thinking on the lines of doing six wheels at one time.
Four drive rims and two steers at one time.
Typical polish time would be around 4 min per wheel so there is no real reason to do more than one at a time.
Excelente
where do I order one from
I'm want one machine
È chou de bola
Me dá um job amigo kkkkk
جاوبني ارجوك
Здесь нет комментов на русском
Вы исправили это