Evan's detailing and polishing : JEM wheel polishing machine
HTML-код
- Опубликовано: 16 фев 2016
- The brand new JEM wheel polishing machine. goshineon.com/wheel-polishing... has a bunch of information on this machine. This one is the 3 phase model with all the bells and whistles. Watch as we sand and polish a concrete wheel in under 20 minutes. The single phase machine has all the same bells and whistles but can be used on any standard 220 single phase outlet. Check out how easy this machine is to setup and get started by watching this video..... • The JEM Wheel Polishin... . If you like the video you just watched then I would also recommend the how to use the JEM wheel machine here • Wheel polish machine :... . Thanks for watching. Subscribe below and turn on notifications to stay up to date on all the new stuff coming out.
All of these products are available at www.amazon.com/shop/metalpoli... or by the individual links.
Makita ga7021 amzn.to/2RPDBoo
6,000 rpm
Dewalt D28499X amzn.to/2JZqw9j
6,000 rpm
Makita 9927c amzn.to/2TaKL8n
3500 rpm variable speed
Dewalt dwp849x amzn.to/2qIZ7j9
3500 rpm variable speed
15 mm orbital
amzn.to/2VWSM2l
Porter Cable
amzn.to/31saU5d
White cotton towel options
12 x 14 (100 pack) amzn.to/2SHAm3r
12x 12 (24 pack) amzn.to/2C5evLU
Makita 5" da or random orbit
hook and loop amzn.to/2SxCY3r
Extension cords
100' 10 gauge amzn.to/2Sqclko
50' 10 gauge tri tap amzn.to/2t6PHPJ
100' 12 ga amzn.to/2GgOFJJ
50' 12 ga amzn.to/2TA5nXs
20 ton jack
amzn.to/3343V4i
20 ton air jack
amzn.to/2qSNTvJ
20 ton stubby jack for low axles
amzn.to/2PzRc5e
20 ton stubby air jack for low axles
amzn.to/2JA9ShK
Getting clean after polishing.
Suave men’s care 3 in 1
amzn.to/37u6K0r
Lava bar soap
amzn.to/2ZxfZda
Under new law I have to proclaim these links are associate links and I get paid for the sales of these products. 
Приколы
![Veeze - F.A.F (ft. Rylo Rodriguez) [Official Music Video]](http://i.ytimg.com/vi/7hlz2S2GmIY/mqdefault.jpg)
I think I found the perfect trifecta for relaxation
1: A good cigar
2: A good whiskey
3: Watching Evan polish.
That is awesome. Thank you. Best comment I have seen today. Truly means a lot.
So much fun to watch the magic happen !! 😎👌
Thank you. Truly appreciate that.
That looks awesome. And honestly that looks like a fun job.
It is. I love getting to do it everyday.
That's one BADASS machine!!👍👍
Silver Grizzly thank you.
That’s “bad ass!” Dude!. Craftsmanship for sure!
Larry
Thank you truly appreciate that. Thanks for watching.
Wow, incredible transformation!
Thank you. Appreciate that. Thanks for watching.
How much per wheel
Amazing !
Thank you! Cheers!
Brilliant.
appreciate that.
Wow! Stay safe.
Thank you. Will do. Thanks for watching.
Great video
Glad you enjoyed it. Thank you for watching.
Awesome!
Thank you. Thanks for watching.
Holy Snickers! Nice work...
Martin Blank thank you.
Good work.
Thank you. Appreciate you stopping by to watch.
Well that sure beats sitting on a milk crate for an hour breaking your back!!!!!! Nice job!!! :-)
Agreed 100% thanks for watching.
Awesome
Thanks for watching
That,s bad ass!!
Thank you.
Muy bueno su trabajo
Thank you
Nice
Thanks for watching
Pleasure to watch, great work
Thank you. Thanks for watching.
That's killer
Thank you. Thanks for watching.
pretty awesome
Thank you. Appreciate that.
Muy bueno 👌 super hermoso me encantaría saber como hacerlo saludos desde Costa Rica
Thanks for watching.
Very informative...
Thank you. We try. Thanks for watching.
Nice job , one question : have you ever heard of a tyveck suit ? I use them all the time where I work . They will keep save your clothes and maybe your skin
Yes I have. Thank you for the pointer. Being tall they are hard to get in my size and very expensive. This industry isn't high return on investment. But neither is our health and safety. Thank you for watching and the tip. Much appreciated.
All you really need is a blower and vacuum system to remove the debris from the wheel area...that should cut down on a lot of the stuff in the air around you.
That’s crazy
Thank you for watching.
That is sweet. Have you heard of the Aussie Rim Shine machine?
Sure have.
You should do a vid on how to clean those bonnets or polishing wheels .
Must be expensive to clean.
They don’t get cleaned at all.
You guys that are saying it's to aggressive and wavy have you ever see Evan s work on a show truck cause I have and it's fucking amazing!!
John Hurd thank you. Appreciate that.
John Hurd, I use to polish and buff show wheels for alcoa, i worked out of Wadsworth Ohio. i did supper singles and regulars like 758'sand 829's and a bunch of others.
bien je veux aussi
Fuckin sick bro...Great work...keep it up...
Martin Flores thank you sir.
Hola, es un super excelente trabajo, me gustaría preguntarte en donde puedo conseguir las diferentes piezas para pulir.
Gracias
Gracias, estoy feliz de que haya disfrutado del video. Todos los productos se pueden encontrar y comprar en goshineon.com.
Am I the only one seeing the waves in the finish from them grinding half the wheel away?
Kevin Bruner yes. We corrected that issue. Just needed to change the angle of the table.
with a scotchbrite pad? nope. this isn't Shawshank.
did anyone else cough a little in the first two minutes because they know what that dust is like?
Everyone in my shop wears a full face respirator and we have a air filtration unit.
That’s cool where does one get a machine like that at
goshineon.com
👏👏👏👍👍👍
Thanks for watching
OMG, It came out so beautiful! Shiny! Now they have to have clear coat or? So they won't trust, right?
No clear coat. Just hand polish or cut polish a few times a year to maintain.
Aluminium doesn't rust
@@TheRoadhammer379 it does corrode though
@@matthewmase3549, rust is far different than Aluminium corrosion. And I'm sorry but aluminum wheels and tanks typically don't corrode in the manner you are thinking. I have only seen pitted corrosion under fuel tank straps, not on exposed surfaces. But regardless, he said rust and I corrected him, I don't need you trying to play schoolyard mediator. Had he said corrode and I said "aluminum doesn't corrode" then you could add your 02 cents.
for grinder
goshineon.com
Did you have to use another wheel past the primary cutting wheel?
If you want a high gloss yes.
How do you no when to hit it with the polish bar again
montay87ify when the pad gets dry you add compound.
Красота! Диск блестит как у кота яйца!
Thanks for watching
What was the material on the first disc used?
goshineon.com/shop blue buff and blend disc.
hello what was the first wheel you used to remove paint
Scotch brite wheel.
Esos disco de lija donde los. Puedo encontrar
www.goshineon.com
Good god u guys do a tremendous job in under 20M that is awsome so i what is the price per wheel ?
They have too many prices
Our prices vary depending on the shape of the wheel coming in and the quality you want coming out. We tailor to what you want to see on the end result.
Rim didnt seem to be set right and im assuming there was to much pressure on the polishing wheel or moving it to fast while it was working which caused the lines but overall its a shiny rim lol
thefrank z we’ve adjusted all of these issues. Check out the new video. Thanks for the feedback.
Dónde consigo el motor la máquina?
El motor no se vende por separado. es todo una unidad
Where can I get a machine like this?
goshineon.com/wheel-polishing-machine
Where can I get this machine to
Please contact ellen@goshineon.com for information regarding purchasing and shipping.
What is the material of the wheel hub?
Aluminium
Are you asking about the sanding disk or the wheel?
That is chrome or aluminium? How can I know?
Genysmen runner aluminum. If it’s chrome it would be made of steel and polish way different.
Good job but please get an exhaust fan for that room aluminum dust is number one cause for many medical problems (Permanent eyeliner) lol
Upnorth Kenny there is exhaust in that room.
exhaust must be close to the rim
The first step is too aggressive,it cut in the the rim and caused waves clearly visible.
michaelovitch I think with this machine what you're seeing might be unavoidable. ran one for a couple years although we didn't change a recipe much. every brand was like that. unless you use an orbital sander.
michaelovitch yeah I second that. if my alc's came out like that I'd be pissed , uneven looks like the river. if anybody was to put these on for a truck show they'd be ridiculed till they left. big thumbs down.
he know what to do
WORLDisFULLofLIES It was covered in concrete. I don't know of a better way to clean one covered in concrete. Also,the odds are against anyone polishing out a wheel that will let them get like that anyway.
Maybe but if you used an acid and an orbital sander it took have taken an hour.
I,d tighten my lock nut better. I think you'd achieve better cutting action from your buff. I do on my bigger machine anyway. Just my opinion, shine on brother 👍
Thanks bud
Me gustaría comprar maquinaria donde la encuentro
Para obtener información sobre compras, comuníquese con ellen@goshineon.com
Is that a big enough wrench
Should have said..."We're going to need a bigger wrench."
I accept donuts as thank-you.
It is the only wrench size that fits. LOL I wish I could find a smaller one but it works.
Donde puedo conseguir una maquina de esa?
Los vendemos. Para mas informacion puede enviar un correo electronico a Ellen@goshineon.com
Where can I buy that machine?
We make them and sell them. goshineon.com/wheel-polishing-machine
Como se llama esa máquina
Esta es una máquina pulidora de ruedas JEM. Si desea obtener más información, comuníquese con ellen@goshineon.com
cool thanks is their a email possible to make sure i get the right part
What part are you looking for?
what are your prices
Our prices vary by the piece and condition.
How much does this machine cost
$21,000
How much for machine
goshineon.com/pages/jem-wheel-polishing-machine
what type of blue pad is that where can i get one set
For a grinder or a machine?
And what does something like that cost?
Average $45-85 depending on condition and quality desired.
Dio voy para Los estados unidos,2021
English?
Very good
My name piula
Cost per wheel?
Depends on how rough it comes in and how nice you want it going out.
Sometimes you gotta ask yourself “do I really need to wear a respirator?” Um, yeah I think so.
Yes always. I never go without one.
@@EvanStegerMetalPolishing hi I'm looking to start my polishing business here I Jamaica where can I get that machine you have using
What’s JEM mean
Great question. It stand for Jim, Evan and Matthew. The 3 of us designed it and engineered it and built it.
Why does it look so wavy :-(
Integra DIY the old sanding process used to do that. We’ve since changed the angle and don’t have that issue anymore.
Evan Steger how much does a set up like that cost?
Can a person still get a machine like this
Yes sir. We build them all the time.
So to get one I would need to get ahold of u. How much is one now n how long would it take to get one.
Thank u for getting back with me. I'm looking at the machine, I was getting Ideal on it.
Thank u for getting back to me
how much you charge per wheel? thanks
£200
roughly from $45-75 on average but some have been less and some have been more on weird occasions.
@@EvanStegerMetalPolishing thanks a lot for the reply ( after 3 years lol) you are my hero, way better than the rest on you tube, and the guys on California are crazy expensive ( i cross thru there ) so whenever I get a load going to Chicago I swing by, thanks Evan
@@EduardoSilva-xe3gp So sorry bud. RUclips just updated and now I can see all messages I hadn't responded to and it was a lot. LOL So I took 2 days and responded to everyone. Sorry it took so long. The old platform was brutal to find peoples comments short of checking every video every day. Swing in anytime bud.
Quiero te conocer
English?
Why not add ventilation in that room? #shineon I follow you on Instagram and Facebook just a question don't want to seem like a smartass
There is ventulation in the room
Maybe the customer should wash the wheels before they bring them in !?
Not a huge deal. Thank you for watching and taking the time to comment.
Safety first you say, but u dont use gloves???
We usually do use gloves in the wheel machine room but gloves are not required. Gloves hold back your grip and make things more dangerous on the machine.