Test fuel pressure , change fuel filter, clean throttle bottle like take it off clean any gunk out, if yhat dont work get some junkyard injectors and fuel pump. Wish i could help diag it and pinpoint it but all these things could be the issue.
I understood what to do... I mean all I can say is unbolt this unbolt this loosen this replace it and tighten it this is a GREAT video I can't stand when someone talks too much and over explains I just need to know where exactly it is and make sure that I don't miss any steps that's it nothing more nothing less so him not talking doesn't bother me one bit helps actually
I am confused two different videos show two different filters and locations for the same year. even parts store shows two different filters and says they both fit. one has 2 outlets and the other 3 outlets????
Great… filter is near E-brake line…. But seriously, if you’re gonna take the time to record & post…. Show your location on the truck etc… I’d delete this and redo it to show respect to viewers.
It would have been nice to see where on the outside of the truck the location of the filter area.
Back left door area.
im about to do this on my 05 expedition right now. what precautions should i go through to ensure that i do this safely?
Driver site
how did you get the clips to relook????
How did you get that blue fuel clamp off? I’m gonna try again. Directions or close captioning would help.
Go to AutoZone and ask them for the tools for the fuel filter
The fuel filter need the special key to release the hose from the fuel filter
You have to use a ice pick tool and pull out the middle part then push the side of the blue clip to release
What is the silver tool you used to disconnect the lines?
You can go to AutoZone and buy tools for fuel filter
Super helpful video. I somehow had the wrong wix filter though😢
Test fuel pressure , change fuel filter, clean throttle bottle like take it off clean any gunk out, if yhat dont work get some junkyard injectors and fuel pump. Wish i could help diag it and pinpoint it but all these things could be the issue.
You need to talk and explain what you're actually doing
I understood what to do... I mean all I can say is unbolt this unbolt this loosen this replace it and tighten it this is a GREAT video I can't stand when someone talks too much and over explains I just need to know where exactly it is and make sure that I don't miss any steps that's it nothing more nothing less so him not talking doesn't bother me one bit helps actually
I am confused two different videos show two different filters and locations for the same year. even parts store shows two different filters and says they both fit. one has 2 outlets and the other 3 outlets????
Unfortunately, even the repair manual can't tell you which set-up you have. I just looked.
You can't see how you undid the blue clip with your meat hooks in the way! No explanation?
Push in and push out it'll pop then use tool.for removal
Where is your shop located?
South Tampa Florida
I couldn't see how you remove the blue clip
You need to buy the special key to open the clip
Great… filter is near E-brake line…. But seriously, if you’re gonna take the time to record & post…. Show your location on the truck etc… I’d delete this and redo it to show respect to viewers.