Never give up. Because the real failure is when we give up and stop trying again. As an inventor, Edison made 1,000 unsuccessful attempts at inventing the light bulb. When a reporter asked, "How did it feel to fail 1,000 times?" Thomas Alva Edidon replied, "I didn’t fail 1,000 times. The light bulb was an invention with 1,000 steps." Genius is 1% inspiration and 99% perspiration - Thomas Alva Edison Energy is neither created nor destroyed, are the words of those who are lazy to try and fear failure.
Conservation of energy has nothing to do with laziness. It took much more than 1000 experiments before the general validity of this law became clear and was accepted. This law is confirmed every day countless times since engineers and scientists calculate with it and the result is always correct. In addition, more than 100 years ago a proof was found (Noether theorem), that our universe couldn't be stable without this law. Edison was aware of conservation of energy and he would have never tried such an absurd arrangement as shown in this video. To try this is not better than an attempt to lift yourself off the ground by pulling at your shoelaces. Those who claim that they have found free energy fall into two categories. Some of them just didn't know how to measure power correctly and the others are liars.
@@ericchapman399 Your comment is vague since it does not specify what you address as "wrong knowledge". If this is aimed at conservation of energy, can you name evidence that conservation of energy is "wrong knowledge"?
Needless to say "Energy cannot be Created and Destroyed" everyone knows that. But there are many energies on this earth that are still hidden and we need to know. Trying to make experiments without surrendering to failure because there is nothing impossible that humans cannot do if they try. The mountain will collapse if we try to collapse it.
Sorry Peter, what on earth make you think AC volt to DC motor directly? Seriously, tested with AC to DC converter and then proving without converter? Why? Could you explain it and can you also prove AC power runs DC motors?
Why would I accept information from someone that can't properly wrap a thin rope around a wheel. It's almost as if you didn't want the project to work. I have to say you did a nice set up.
It was very important if you wrote the name of each piece and from which store you can buy it during the presentation of the video and this will have a positive impact on us who are interested in electricity, but your work is mighty, beautiful, scientific, important and useful.
Great work bro. 👏. Resonance capacitor needed on motor side (re-visit LC circuits) flywheel needed in between motor/ and alternator can be rewound for more output. Don't throw the baby out with the bath water. Try again.
This version of generator needs a flywheel to maintain a momentum and velocity. Or you need a 120\240 circuit to push the 220/120 motor. Then build a 12v inverter on the 220 circuit to loop the 12v and 220 current. A 220/120 - 12v inverter is necessary to cause that of what you are trying to achieve
I fully appreciate your fine work, but I ask you to write to us in the description box the names of all the pieces and stress what I say the names of all the pieces, starting from the aluminum pieces used in the preparation until the last electrical piece with their specifications, and if possible from any store we buy them, because we are your followers and we love To repeat the experience and not know the names of the necessary pieces correctly, thank you.
You can use supercapacitors and mica capacitors to create a surge of electric current and an electric shock current at start so that the free energy cycle can run.
Automotive alternators have somewhere around 50% t0 70% efficiency, if you are lucky. Using an alternator to generate DC power to drive an electric motor to drive an alternator can not work. Period.
This is technically possible to work all it needs is an diode to prevent the motor back feeding while alternator is producing current so therefore the motor won't spin and the alternator won't power moter on its own and put a capacitor on the motor after the current passing the diode to help to put a load so it can generate and run on its own
Моторчик на 250 ват не має досить сили щоб покрутити генератор на 120 ампер,ви попробуйте взяти моторчик високообертовий і зробити редукцію...🤔👍 На приклад моторчик на 500 ват/12 000rpm і зробити редукцію 4:1
Great job. you might try to put a 40uf cap in parallel with the motor and the put line voltage to start it. After it reaches max RPM remove the line voltage. Again great job.
Hello Peter, congratulate your RUclips channel 👍🏻 you already have a very good number of subscribers, which is worth it. But honestly, what you assemble there looks good with the beautiful aluprofilen, but that makes no sense at all. You have a 24 volt DC motor and your truck generator supplies AC voltage.... . that's clear.... . you must switch a rectification between it.... . this is the first point.... . and the second point is the speed. much too low 2900 revolutions, that never works, you can read that, you have to come to at least 3500.... try with a belt, with a gear ratio, the engine needs the larger belt pulley and the smaller generator... perhaps a ratio of 3 to 2. I speak from experience, I have already made myself in this respect. i've written you before. it may be of course that you just want subscribers and arouse interest. but that doesn't look for serious looking for free energy. best regards Thomas
Just what are you expecting it to do? Break the laws of basic physics, make water run up a hill or the sun to change colour? The concept of generating free energy this way is childishly naive. For it to do anything the motor would need to output more power than is put into it, and/or the alternator would need to output more energy than is put into it, in both cases plainly impossible, and silly.
hey fellow engineer....you're not spinning it fast enough for the alternator to feed the motor. You could run a 240v feed on a switch just to start it. 🙂
tesla a demonstrat ca aceasta schema se poate sa elibereze energie suplimentara dar nu cu 24 w sa duca un alternator de 2800 w ,conf schemei functionale motorul trebuie sa aiba in jur de 40% din puterea generatorului-astfel de dispozitive exista si se vand in romania circa 1000 euro kw putere suplimentara eleiberata
HI Peter. Are sure that you have connected the DC motor in the right order? In the case that you have exchanged the positive and negative poles at the DC motor, the system would always work against your initial rotation with the rope.
@@engineer_peter Hello.. I am asking you, do you really not know that you should make changes in the generator? Or do you know but are you kidding me?? Maybe you make these types of videos just to generate income
@@engineer_peter Hi... Your work is excellent.. Thank you for your time and effort.. But I thought you don't know what to do in the exponential change generator and you are trying to build this device and as a result You don' t get it.. if your goal is to educate and educate scientifically.. your work is excellent
First of all. U have a dc motor and the power of the generator is alternative.. and the connection ar wrong.. take out the rotor and put some neodim on him and the outer coils of the generator make a dc bridge then u put the dc motor.
To get FREE ENERGY you have to increase efficiency. The coil should be as large a smooth circle as possible and go around the magnets. for 2 very important reasons. 1 the rotor would be very light and would rotate fast with just a few watts. 2 the generator would not heat up, dispersing energy in heat and friction and decreasing the power of the magnets.
Включи мотор от розетки и замерь сколько выдает генератор?Если мотор потребляет 220 и генератор выдает 220 то только тогда стыкуй как на видео.Если генератор выдает например 150вольт то надо через шкивы совместить обороты и напряжение.
У него генератор на 24В и мотор на 24 В, на наклейках видно, но разве дело только в этом? Даже если генератор вырабатывает 24В при скажем 1000 оборотах и номинальные обороты мотора при 24 В также 1000 оборотов это ничего не даст. Генератор может давать 24В но ток значительно меньше, чем требуется для поддержания вращения мотора на 24В даже на хх, не говоря под нагрузкой. Автору конечно спасибо за этот тест, но ведь очевидно же было сразу что это фейк, здесь нет притока энергии извне, а сверхединицы нет в принципе.
It not work because the energy from the motor is back feeding while alternator is producing a current therefore it doesn't do nothing. When you spin a electric motor you are producing a small current so to prevent that you need a diode to prevent backfeeding from motor while alternator is producing a current to motor to help it run better just add and small capacitor with Same voltage it should run for a long time
Vitaly, you could be correct under load. He needs to get his RPM up high enough to generate the voltage then run through the diodes to output. I just don't think he can get there by rope pull start and he isn't very good at it anyway. I modified a 90AMP alternator with drilling and mounting the 10mm x 3 mm NIBs. The initial torque resistance from the magnetic field lock was so high that when I hooked it up to a 1/2 HP washing machine motor, the damn thing wouldn't turn at all at 110v. And I had compared the rotor field strength of the mounted magnets vs the 12v to the brushes. magnets not even close. I think it's Mr. Electron that shows self excitation to the rotor and I think it needs 12v to power up fully. That's my next attempt, the new alternator got here yesterday.
You guys are just wasting alternators. These devices never work in theory and especially not in real world conditions. There’s so many more productive, rewarding and fun projects you could spend your time and resources on that will actually benefit you and won’t inevitably end in a failure like these “free energy” devices.
There is energy every where and it's free! If you can find a way to harness it, from the Government/Electrical companies. ~ My Sons (5years old): Dad can we fly with out mechanical means? Me: Yes! Sons: how? Me: I don't know, but when you find the way, let me know! They use to laugh at the thought of man flying and reaching the moon?
Fake, as it breaks the rules of diminishing return, as all wiring, capacitors, and connectors wastes or loses current! Therefore you lose current every cycle!
2900 rpm would be too much for a 12 or 14 pole generator/alternator..it would create more than 200 Hertz frequency at rated speed and would destroy any load connected to it..Use the formula (RPM = (120 x f) no. of poles; where f is frequency)..The rated speed should match a number of poles that would result to 50 / 60 Hertz. 12 or 14 magnets are too much unless you use DC output only.
Most motors can handle 120 Volts DC Or AC Current..brushless motor's Create their own AC Current by the very Motion of a 3 phase Armature " Alternator " Circuit's are used to calculate the orientation and surge Nessessity to push or pull the Armature to the next Winding and EM Felid stator a simple Hall effect sensor which can be done with solid state transition. A mercury switch for example Pivot points on magnets " spherical Dipole Vacuum pressure bearings " would offer ZERO resistance to friction. HEAT = LOSS of Entropy. COLD = Increasing Entropy Circuits " heat Cold Acoustic waveform energy, push / pull photon , electron Eddy currents travel using Phi..all Celestial elements do..
@@Jacob.Springer 1) I didn't know the alternator was 'damned'. 2) Considering there are only two components in this scam of a video, an alternator and a motor, wouldn't you think that the alternator had at least 50% to do with "it", whatever the "it" you are referring to is?
الشيخ محمد الجبوري - اول مره اشوف شيخ دين يحمل شهاده ومثقف وفاهم وطيب بنفس الوقت يووعي الشعب العراقي ويجره للطريق - وعليك ياشيخنا انقاذ الشيعه من عبادة الاصنام وارجاعهم الى ائمتهم اهل البيت ويتركون دون المعصوم ولا ينصبونه ويصدقونه في كل ماقال وهو لا يعرف حتى لغة الاسلام العربيه - والتعرض للمحتكرين والمحتلين لحوزة النجف وهم اجانب ليسو عرب كيف فهمو الدين وتفاسير الاحاديث الي تصعب حتى على المتكلم العربي - والاموال المسروقه من دون وصل او رصيد نعرف اين تذهب هذه الاموال والارامل تزني والشباب يقتل امه وابوه والمريض بالمستشفى يستغيث والشباب بالحشيش والكبسله وانتحار الكثير وكل الضلم والجور الي يجري على كل شيعة العالم ولا من متكلم او مدافع لهذه المضالم وكاننا نعيش في غابه يتراسها وحش يسمى المرجع او المركع يقدس وتقبل يده ويقلوله رئيس وبيته من ايجار على اساس العراقيين كلهم ملاكت بيوت اليس منهم من سكنو المقابر يستغيثون ولا مغيث والي جالسين بالتجاوز من الفقر تاتيهم عتبة التوقيع على الطيازه وتهدم بيوتهم - والفديوات موجوده على اليوتيوب - الا من ناصر لهؤلاء المساكين المضلومين المضهدين من قبل محتلي حوزة ائمتهم بالنجف وقابعين على منبر الشيعه ويدعون التشيع وهم العن من النواصب بكذبهم ودجلهم وسرقة خزائن الشيعه وراوتبهم جاريه لسبعين سنه الى ان يموتو - ليش مانتصدى ونحن مامورين من ائمتنا بلتصدي للباطل اينما وجد والى متى هذا الضلم وعين امامنها المهدي علينا ينتضرنا متى نصحى من نومتنا هذه - - - والساكت شريك بالجريمه الي مايفضح المتلبسين بلباس الدين ومتمرجعين بانفسهم ومعتدين على اهل البيت ومغتصبي منبرهم
ROTFLMFAO!!! I don't know where you are but here in America the average 13 year old knows that you can't run a generator with a motor that is fed power by the generator that it turns. Not possible without adding some power from an outside source, and when you do that, you have a net LOSS of power, because typical motors and generators or alternators operate at below 90% efficiency. 100% efficiency, or "unity", is an impossible achievement. You would have to have better than 100% efficiency in order to produce power, which is of course a physical and mathematical impossibility. A unity motor would generate 1 horsepower for every 746 watts fed to the controller, or the motor if controller-less. A unity generator producing 746 watts of electrical power requires 1 horsepower of mechanical energy to turn the shaft. If you want "free" energy, look to photovoltiac solar cells or heat differential recovery or kinetic energy provided by falling or flowing water or air, or waste energy from exhaust heat or hydrocarbons from decomposition of bio matter. They are not free in the sense of creating energy out of nothing, but they are free in the sense of energy that unless harvested, and stored or used, simply goes to waste, anyway.
Acho impressionante a "clareza" com que é mostrada a construção os "testes" da geringonça .Só faltou mostrar , o mais importante que é como conseguiu fazer que o negócio ignorasse as duas propriedades da física que é o ATRITO e a RESISTÊNCIA . O atrito , dos rolamentos , correias etc e a resistência dos condutores que embora minima , impedem que o sistema funcione . Fora isso , está perfeito .
You missed something, the way they do it is they used a pulley and the DC motor is supposed to get a larger ring pulley and the alternator is supposed to be a smaller ring pulley so that a 1 revolution of the DC motor equals 4-5 revolutions of the alternator! Atleast that's what I usually observed from most videos! Let us know after you tried this too if it's still fake, would really like to know too! Ty
Hi Engineer Peter even didn't buy new Alternator you can build your own like you made a Transformer coil 2,200 turn primary left and right, 2200 turn. and driver motor of your rotor 1400 rpn you can get the result 220 V or more than. because many of your experiment or vedio content Im watching.
All of these are doomed to fail. It doesn't matter if you have a different capacitor, different wires, different magnets. For those disagreeing, I will tell you that humans learned to write things down, so the next generation didn't have to reinvent the wheel every time. Pick up a physics book, so you aren't trying the same experiment that has been done thousands of times for the last 2 centuries, without success, ever. It will tell you why this is and forever will be impossible :)
U didnt spin it fast enough mate. Thats why it did work.. try jump starting it with a 24v battery and let it get to running speed then take battery off. It will work then
Маховик как ротор с магнитами через магнитную передачу без мех сцепления аксиального типа,маховик аккумулирует, магнитная передача смягчает рывки при нагрузке в итоге получаем стабильность и износостойкость
I am interested in interacting with your channel, and your work is great and educational, but I ask you to mention the names of all the parts you used so that we can repeat this experience and have greater interaction, or write in the description box, as everyone does, the name of the part used in the experiment and the online store from where you can get it. We buy it. Thank you
@@James-W6WOF there isn't a better way because it's bullshit but if you want a generator for whatever reason buy one don't attemp to make it for many reasons first tolerance is efficency in a quality unit the armature is just barely clearing the windings whereas home made has a large gap due to inconsistancy, second it's dangerous most expoxy's sofen with heat and generators get hot also the armature should be balanced you spinning it pretty fast. But not matter how good it is this kind of thing will never work 90% is very high efficency for a motor or generator meaning if you give the motor 1000w of power you will get 900w of rotational force then the connected generator takes that 900w of force and makes 810w of power so you have lost 190w in the process you will never gain power
@@shaynegadsden Perhaps it's my fault for thinking that the gentlemen's project was just something to pass time rather than creating a viable product? That said, I'm pretty sure everyone knows what these types of video's are about (entertainment). But may mistake...
I love your adjustmentable aluminum frames. I love your work. Where do I find the parts to make this, the frame and motor.. Thank you and may God bless you abundantly. Michael in Maine, USA
Thousands of other inventors show us in their videos, how to successfully generate electricity from scrap with simple means. You, on the other hand, use new and expensive parts, and still don't get it baked. The other people show us their successes, you, on the other hand, keep repeating your lack of success. Aren't you normal? Or do you get paid to that you keep showing us your failures? -
Thanks for the effort, but have you tried switching the connections…. It could be a polarity issue…. Also, the some sort of capacitor in the circuit… it should act as an energy buffer…
Izgleda da je bas ta caka, "zakon o samoodrzanju energije!?" Zao mi je truda, pucanja bonusa kod ljudi, zivaca, sredstava, matretiranja oca, pokusao sam, ne ide! Tuzno! 👿
ok...there is a issue here. 1st of all, you didn't have a battery in line with it. This would not only start it up but bring it too speed in order for the alternator to be able to generate! The battery also provides a voltage inside of it to excite the coils - other wise it will not generate output to begin with, (It's referred to as "Alternator death"! alternators will not put out until it gets power to help coils in excitement ......(Ask any married woman about this mystery) LOL. Once it runs,....you should see voltage going into battery. You also could have tried a GENERATOR unit as they are designed to generate voltage while rotation is present but no power or battery needed.....generators are DC outputs and are pretty linear in operation...(Remember having a generator on your front bike tire to feed your headlight at night)??
Everything has losses. If you put 100W of electrical power into a motor, you don't get 100W of mecanical/rotating force from the rotating shaft, instead you gott less because of resistance in the cables, in the connectors, in the windings, in the air, in the bearings and so on. So you have to invent a zero resistance motor. But if you did, you'r still not get more then 100W of mecanical force from the shaft. The exact same thing can be said with the generator. If you put 100W of mechanical energy to rotate the shaft, you don't get more than 100W of electrical energy out from it because of all the reasons I mention above. Even if you had a perfect generator with non resistance, you would only get exactly 100W from it. And there you have it, a perfect motor connected to a perfect generator both with zero resistance, a perpetual motion device that can sustain its own motion but nothing else. If you would draw 0,00001W from it, the balance is off and it would slowly slow down untill it stops. Nothing usefull at all. But we all know that zero resistance motors and generators does not exist. But even if they did exist, you would never get any extra energy out from it to use. But anyway, good luck with you toy.
its impressive , but this motor connected to car alternator getting too much hot. it ca not be used for more than few minutes . because Car alternator becomes hard after becoming magnet with 12 Volt DC Current which makes motor very very hot. . . so it is not feasible.
Betreibe den kleinen Motor doch mit 24V 10A und schau dann mal wieviel Strom der Alternator Lichtmaschine bringt.... also watt. Wenn die lichtmaschiene wirklich 24v 120A bringt wäre das nice .Und nen Zwischenspeicher fehlt so geht das nicht.
I'm amazed at how many people still think that you can create more output energy that the input energy, its not even close; If it was possible then we would have perpetual motion...perpetual motion is impossible...physics does not lie...
Never give up. Because the real failure is when we give up and stop trying again.
As an inventor, Edison made 1,000 unsuccessful attempts at inventing the light bulb.
When a reporter asked, "How did it feel to fail 1,000 times?"
Thomas Alva Edidon replied,
"I didn’t fail 1,000 times. The light bulb was an invention with 1,000 steps."
Genius is 1% inspiration and 99% perspiration - Thomas Alva Edison
Energy is neither created nor destroyed, are the words of those who are lazy to try and fear failure.
Conservation of energy has nothing to do with laziness. It took much more than 1000 experiments before the general validity of this law became clear and was accepted. This law is confirmed every day countless times since engineers and scientists calculate with it and the result is always correct. In addition, more than 100 years ago a proof was found (Noether theorem), that our universe couldn't be stable without this law.
Edison was aware of conservation of energy and he would have never tried such an absurd arrangement as shown in this video. To try this is not better than an attempt to lift yourself off the ground by pulling at your shoelaces. Those who claim that they have found free energy fall into two categories. Some of them just didn't know how to measure power correctly and the others are liars.
I LOVE THE ENCOURAGEMENT, NICE ONE,
@@sciencefreak9070 As always a little knowledge is dangerous. Being convinced by the wrong knowledge can be fatal
Edison didnt invent shit my guy
@@ericchapman399 Your comment is vague since it does not specify what you address as "wrong knowledge". If this is aimed at conservation of energy, can you name evidence that conservation of energy is "wrong knowledge"?
Needless to say "Energy cannot be Created and Destroyed" everyone knows that. But there are many energies on this earth that are still hidden and we need to know. Trying to make experiments without surrendering to failure because there is nothing impossible that humans cannot do if they try. The mountain will collapse if we try to collapse it.
You have hit the nail on the head, spot on!!! We as humans can succumb to defeat too easily!!!
Sorry Peter, what on earth make you think AC volt to DC motor directly?
Seriously, tested with AC to DC converter and then proving without converter? Why? Could you explain it and can you also prove AC power runs DC motors?
You have to befriend the electricity fairy to make it work.
Why would I accept information from someone that can't properly wrap a thin rope around a wheel. It's almost as if you didn't want the project to work. I have to say you did a nice set up.
Nailed
Half ass spin
It was very important if you wrote the name of each piece and from which store you can buy it during the presentation of the video and this will have a positive impact on us who are interested in electricity, but your work is mighty, beautiful, scientific, important and useful.
Its fake you clown
Ok, I try to do it
Thanks a lot for your understanding
Wat this is free energy?ruclips.net/video/VN0Ikpdgezo/видео.htmlsi=AS6uVDdkw9Od_74L
Great work bro. 👏. Resonance capacitor needed on motor side (re-visit LC circuits) flywheel needed in between motor/ and alternator can be rewound for more output. Don't throw the baby out with the bath water. Try again.
This version of generator needs a flywheel to maintain a momentum and velocity. Or you need a 120\240 circuit to push the 220/120 motor. Then build a 12v inverter on the 220 circuit to loop the 12v and 220 current. A 220/120 - 12v inverter is necessary to cause that of what you are trying to achieve
Free energy is not possible…. Unless ! You had magnetic levitation in the build to reduce / erase any friction and thermodynamic waste 😉
@@tonyromano8337 i bet it can work
Even if it is fake we all may still learn from it only because it looks interesting
Erfahrung ist besser
I fully appreciate your fine work, but I ask you to write to us in the description box the names of all the pieces and stress what I say the names of all the pieces, starting from the aluminum pieces used in the preparation until the last electrical piece with their specifications, and if possible from any store we buy them, because we are your followers and we love To repeat the experience and not know the names of the necessary pieces correctly, thank you.
Are you kidding ?
If I want to repeat this experience, where do I buy the pieces and what is their name?
Why would you want to do that it’s a waste of time
@@Jacob.Springer because maybe we are gonna do it differently and the same parts could also be useful....and is it your time that's wasting ?
@@brandonrajkumar1507 the thing won’t work it’s impossible, so make something useful instead.
You can use supercapacitors and mica capacitors to create a surge of electric current and an electric shock current at start so that the free energy cycle can run.
Automotive alternators have somewhere around 50% t0 70% efficiency, if you are lucky. Using an alternator to generate DC power to drive an electric motor to drive an alternator can not work. Period.
the altnerator needs to spin at 1000 rpm or more so power it with the dc motor then switch the power fed to the motor with a DPDT switch.
This is technically possible to work all it needs is an diode to prevent the motor back feeding while alternator is producing current so therefore the motor won't spin and the alternator won't power moter on its own and put a capacitor on the motor after the current passing the diode to help to put a load so it can generate and run on its own
Bet your neighbor is pissed someone stole his alternator.
Моторчик на 250 ват не має досить сили щоб покрутити генератор на 120 ампер,ви попробуйте взяти моторчик високообертовий і зробити редукцію...🤔👍
На приклад моторчик на 500 ват/12 000rpm і зробити редукцію 4:1
дякую за ідею, подумаю :-)
FREE ENERGY GENERATOR IS A CONCEPT WITHOUT ANY BASE.
Ich würde diese Scheibe nicht benutzen ,weil sie nicht passt
Well, I knew it wouldn't work from the start yet stayed to enjoy the whole video!
Was muss ich dafür bezahlen wenn du mir so ein Gerät baust
Chạy khá ngon
You asked if it was fake. It won’t work on its own as “free energy”
umm yea, you need to do a little more than that to get the alternator to produce power when spinning.. because you know... electromagnetic stator
First, you have to start it up with a battery, then your missing key components for current exchange and flow. You can't do it direct like that.
Thank you for the advice
These amazing generators could save lives and keep people warm in the winter in a tent ⛺️
Great job. you might try to put a 40uf cap in parallel with the motor and the put line voltage to start it. After it reaches max RPM remove the line voltage. Again great job.
Yes, we all know... free energy is everywhere. Tell this shit to your hairdresser.
Eletro magnétic-2:30 Moto - Perpétuo - Motor - Alternador -
Gerador - Eletricidade :
Fantástic ! ; Diz :
Ditado : Eletricidade :
Princípio : Nada se Cria : Nada se Aumenta ; Tudo se
" Transforma " .;
É - Eletricidades ! :
Do - Futuro : Começar : Gerar -
Eletricidade ~ Para ~
Sempre - Eletricidades -
Contínua ~ SEMPRE !!! ;
Novas ! Invenções !
Aparecendo ? Melhor ! Cada vez :
Mais ? Melhoradas : no : Projeto ; Designer ; Lay-out ;
Modelo ; Sistema ;
Funcionamento ! ;
Parabéns ! Invenções ? ;
Que : Não - Param ? ;
( Tudo - Por - imãs -
Funcionam ~ Perfeito ).
Hello Peter, congratulate your RUclips channel 👍🏻 you already have a very good number of subscribers, which is worth it. But honestly, what you assemble there looks good with the beautiful aluprofilen, but that makes no sense at all.
You have a 24 volt DC motor and your truck generator supplies AC voltage.... . that's clear.... . you must switch a rectification between it.... . this is the first point.... . and the second point is the speed. much too low 2900 revolutions, that never works, you can read that, you have to come to at least 3500.... try with a belt, with a gear ratio, the engine needs the larger belt pulley and the smaller generator... perhaps a ratio of 3 to 2. I speak from experience, I have already made myself in this respect. i've written you before. it may be of course that you just want subscribers and arouse interest. but that doesn't look for serious looking for free energy. best regards Thomas
Just what are you expecting it to do? Break the laws of basic physics, make water run up a hill or the sun to change colour?
The concept of generating free energy this way is childishly naive. For it to do anything the motor would need to output more power than is put into it, and/or the alternator would need to output more energy than is put into it, in both cases plainly impossible, and silly.
hey fellow engineer....you're not spinning it fast enough for the alternator to feed the motor. You could run a 240v feed on a switch just to start it. 🙂
Link for the cuppliin?
Great work! You can spend a lot of time, effort, and money to prove something that is not supposed to work actually did not work.
tesla a demonstrat ca aceasta schema se poate sa elibereze energie suplimentara dar nu cu 24 w sa duca un alternator de 2800 w ,conf schemei functionale motorul trebuie sa aiba in jur de 40% din puterea generatorului-astfel de dispozitive exista si se vand in romania circa 1000 euro kw putere suplimentara eleiberata
@@petricabosneaga3760 what language is this?
HI Peter.
Are sure that you have connected the DC motor in the right order?
In the case that you have exchanged the positive and negative poles at the DC motor, the system would always work against your initial rotation with the rope.
I'm not 100% sure, but I'll look into it, thanks for the heads up 🙂
@@engineer_peter Hello.. I am asking you, do you really not know that you should make changes in the generator? Or do you know but are you kidding me?? Maybe you make these types of videos just to generate income
@@HOSSEIN.M900
Hi, I'm just trying to show that many videos on RUclips are fake or not. I will test what I see on youtube and publish my result.
@@engineer_peter Hi... Your work is excellent.. Thank you for your time and effort.. But I thought you don't know what to do in the exponential change generator and you are trying to build this device and as a result You don' t get it.. if your goal is to educate and educate scientifically.. your work is excellent
First of all. U have a dc motor and the power of the generator is alternative.. and the connection ar wrong.. take out the rotor and put some neodim on him and the outer coils of the generator make a dc bridge then u put the dc motor.
Where did you get the coupling to join motor and alternator ??
I just came to see the BS people write about this nonsense.. as they say, there is one born every minute...
Svp c est bien votre expérience.
Nous donner les composante ďs matériel et leur capacité
To get FREE ENERGY you have to increase efficiency. The coil should be as large a smooth circle as possible and go around the magnets. for 2 very important reasons. 1 the rotor would be very light and would rotate fast with just a few watts. 2 the generator would not heat up, dispersing energy in heat and friction and decreasing the power of the magnets.
Включи мотор от розетки и замерь сколько выдает генератор?Если мотор потребляет 220 и генератор выдает 220 то только тогда стыкуй как на видео.Если генератор выдает например 150вольт то надо через шкивы совместить обороты и напряжение.
У него генератор на 24В и мотор на 24 В, на наклейках видно, но разве дело только в этом? Даже если генератор вырабатывает 24В при скажем 1000 оборотах и номинальные обороты мотора при 24 В также 1000 оборотов это ничего не даст. Генератор может давать 24В но ток значительно меньше, чем требуется для поддержания вращения мотора на 24В даже на хх, не говоря под нагрузкой. Автору конечно спасибо за этот тест, но ведь очевидно же было сразу что это фейк, здесь нет притока энергии извне, а сверхединицы нет в принципе.
Remember energy can neither be created or destroyed. What a fake. All for what.
It not work because the energy from the motor is back feeding while alternator is producing a current therefore it doesn't do nothing. When you spin a electric motor you are producing a small current so to prevent that you need a diode to prevent backfeeding from motor while alternator is producing a current to motor to help it run better just add and small capacitor with Same voltage it should run for a long time
Reverse what you have take the diodes out of the alternator and hook your converter and dc motor back up
Vitaly, you could be correct under load. He needs to get his RPM up high enough to generate the voltage then run through the diodes to output. I just don't think he can get there by rope pull start and he isn't very good at it anyway. I modified a 90AMP alternator with drilling and mounting the 10mm x 3 mm NIBs. The initial torque resistance from the magnetic field lock was so high that when I hooked it up to a 1/2 HP washing machine motor, the damn thing wouldn't turn at all at 110v. And I had compared the rotor field strength of the mounted magnets vs the 12v to the brushes. magnets not even close. I think it's Mr. Electron that shows self excitation to the rotor and I think it needs 12v to power up fully. That's my next attempt, the new alternator got here yesterday.
IT'S FAKE!! Mr. Electron is a fake!!!
You guys are just wasting alternators. These devices never work in theory and especially not in real world conditions. There’s so many more productive, rewarding and fun projects you could spend your time and resources on that will actually benefit you and won’t inevitably end in a failure like these “free energy” devices.
Very clean setup, though! :)
You proved it was fake!
Thank you for sharing with us Peter!
There is energy every where and it's free! If you can find a way to harness it, from the Government/Electrical companies. ~ My Sons (5years old): Dad can we fly with out mechanical means? Me: Yes! Sons: how? Me: I don't know, but when you find the way, let me know! They use to laugh at the thought of man flying and reaching the moon?
use a battery to run motor and alternator to keep it charged
Fake, as it breaks the rules of diminishing return, as all wiring, capacitors, and connectors wastes or loses current! Therefore you lose current every cycle!
it's scientifically correct setup, now all you need is a month work out to gain strength.
Testing 24/7 ???
We experiment zako hazina conclusion unajifanyia utumbo tu, hutoi maelezo?😂😂😂😂😂😂😂
2900 rpm would be too much for a 12 or 14 pole generator/alternator..it would create more than 200 Hertz frequency at rated speed and would destroy any load connected to it..Use the formula (RPM = (120 x f) no. of poles; where f is frequency)..The rated speed should match a number of poles that would result to 50 / 60 Hertz. 12 or 14 magnets are too much unless you use DC output only.
Most motors can handle 120 Volts DC Or AC Current..brushless motor's Create their own AC Current by the very Motion of a 3 phase Armature " Alternator " Circuit's are used to calculate the orientation and surge Nessessity to push or pull the Armature to the next Winding and EM Felid stator a simple Hall effect sensor which can be done with solid state transition. A mercury switch for example Pivot points on magnets " spherical Dipole Vacuum pressure bearings " would offer ZERO resistance to friction.
HEAT = LOSS of Entropy.
COLD = Increasing Entropy Circuits " heat Cold Acoustic waveform energy, push / pull photon , electron Eddy currents travel using Phi..all Celestial elements do..
@@mjolnirswrath23 If I plugged in my 12 V motor in to 120 V AC it will blow up
What the hell are you talking about? It's a truck alternator, it outputs a nominal 24v DC!
@@icarossavvides2641 it has nothing to do with the damn alternator
@@Jacob.Springer 1) I didn't know the alternator was 'damned'. 2) Considering there are only two components in this scam of a video, an alternator and a motor, wouldn't you think that the alternator had at least 50% to do with "it", whatever the "it" you are referring to is?
Petře, odkud berete ty spojky a řemenice ? Vy už jste mi sice jednou název té firmy psal, ale já už to Vaše video s odpovědí nemohu najít ... :(
Ahoj Haberkorn.cz
Interesting. How do you specify that type of clutch? Regards
الشيخ محمد الجبوري - اول مره اشوف شيخ دين يحمل شهاده ومثقف وفاهم وطيب بنفس الوقت يووعي الشعب العراقي ويجره للطريق - وعليك ياشيخنا انقاذ الشيعه من عبادة الاصنام وارجاعهم الى ائمتهم اهل البيت ويتركون دون المعصوم ولا ينصبونه ويصدقونه في كل ماقال وهو لا يعرف حتى لغة الاسلام العربيه - والتعرض للمحتكرين والمحتلين لحوزة النجف وهم اجانب ليسو عرب كيف فهمو الدين وتفاسير الاحاديث الي تصعب حتى على المتكلم العربي - والاموال المسروقه من دون وصل او رصيد نعرف اين تذهب هذه الاموال والارامل تزني والشباب يقتل امه وابوه والمريض بالمستشفى يستغيث والشباب بالحشيش والكبسله وانتحار الكثير وكل الضلم والجور الي يجري على كل شيعة العالم ولا من متكلم او مدافع لهذه المضالم وكاننا نعيش في غابه يتراسها وحش يسمى المرجع او المركع يقدس وتقبل يده ويقلوله رئيس وبيته من ايجار على اساس العراقيين كلهم ملاكت بيوت اليس منهم من سكنو المقابر يستغيثون ولا مغيث والي جالسين بالتجاوز من الفقر تاتيهم عتبة التوقيع على الطيازه وتهدم بيوتهم - والفديوات موجوده على اليوتيوب - الا من ناصر لهؤلاء المساكين المضلومين المضهدين من قبل محتلي حوزة ائمتهم بالنجف وقابعين على منبر الشيعه ويدعون التشيع وهم العن من النواصب بكذبهم ودجلهم وسرقة خزائن الشيعه وراوتبهم جاريه لسبعين سنه الى ان يموتو - ليش مانتصدى ونحن مامورين من ائمتنا بلتصدي للباطل اينما وجد والى متى هذا الضلم وعين امامنها المهدي علينا ينتضرنا متى نصحى من نومتنا هذه - - - والساكت شريك بالجريمه الي مايفضح المتلبسين بلباس الدين ومتمرجعين بانفسهم ومعتدين على اهل البيت ومغتصبي منبرهم
What this is free energy?ruclips.net/video/VN0Ikpdgezo/видео.htmlsi=AS6uVDdkw9Od_74L
ROTFLMFAO!!! I don't know where you are but here in America the average 13 year old knows that you can't run a generator with a motor that is fed power by the generator that it turns. Not possible without adding some power from an outside source, and when you do that, you have a net LOSS of power, because typical motors and generators or alternators operate at below 90% efficiency. 100% efficiency, or "unity", is an impossible achievement. You would have to have better than 100% efficiency in order to produce power, which is of course a physical and mathematical impossibility. A unity motor would generate 1 horsepower for every 746 watts fed to the controller, or the motor if controller-less. A unity generator producing 746 watts of electrical power requires 1 horsepower of mechanical energy to turn the shaft.
If you want "free" energy, look to photovoltiac solar cells or heat differential recovery or kinetic energy provided by falling or flowing water or air, or waste energy from exhaust heat or hydrocarbons from decomposition of bio matter. They are not free in the sense of creating energy out of nothing, but they are free in the sense of energy that unless harvested, and stored or used, simply goes to waste, anyway.
Honest Video!
Nice job
1 out of the 1000 fakes on RUclips is real.
Acho impressionante a "clareza" com que é mostrada a construção os "testes" da geringonça .Só faltou mostrar , o mais importante que é como conseguiu fazer que o negócio ignorasse as duas propriedades da física que é o ATRITO e a RESISTÊNCIA . O atrito , dos rolamentos , correias etc e a resistência dos condutores que embora minima , impedem que o sistema funcione . Fora isso , está perfeito .
E também o efeito lenz que talvez seja o principal. Ah mas a engenhoca não funcionou, é fake.
Hola cuando hace el cambio el motor jira al revés y se bloque
Great video! Where did you get the couplings to marry the two shafts???
You missed something, the way they do it is they used a pulley and the DC motor is supposed to get a larger ring pulley and the alternator is supposed to be a smaller ring pulley so that a 1 revolution of the DC motor equals 4-5 revolutions of the alternator! Atleast that's what I usually observed from most videos! Let us know after you tried this too if it's still fake, would really like to know too! Ty
Too bad this is not possible, I would have liked to see it work.
You must use neo magnets cause you eat up usefull power energising magnetic fields in altenator.
He didn't do it by the book. He skipped steps. The windings from the alternator do not exit. It's all done wrong
完成品価格表示宜しく御指導御願いします😃
Hi Engineer Peter even didn't buy new Alternator you can build your own like you made a Transformer coil 2,200 turn primary left and right, 2200 turn. and driver motor of your rotor 1400 rpn you can get the result 220 V or more than. because many of your experiment or vedio content Im watching.
Hi there did you get the metal base from?
Not a generator but a siphon.
All of these are doomed to fail. It doesn't matter if you have a different capacitor, different wires, different magnets. For those disagreeing, I will tell you that humans learned to write things down, so the next generation didn't have to reinvent the wheel every time. Pick up a physics book, so you aren't trying the same experiment that has been done thousands of times for the last 2 centuries, without success, ever. It will tell you why this is and forever will be impossible :)
Humans are also selfish and will happily write down the wrong thing simply to watch others suffer as they carry on ahead...
Could you help me with the link for the moror and the coupling please love it I am building one to :)
U didnt spin it fast enough mate. Thats why it did work.. try jump starting it with a 24v battery and let it get to running speed then take battery off. It will work then
Hier meine Teslapowermagnification: ruclips.net/video/srOxGB_qThk/видео.html
Okay
Маховик как ротор с магнитами через магнитную передачу без мех сцепления аксиального типа,маховик аккумулирует, магнитная передача смягчает рывки при нагрузке в итоге получаем стабильность и износостойкость
That doesn't work cause you must have a starting rope made with unicorn hair, find one and it will work :)
팽이를 안돌려봐서 그걸 못돌리네!!!!
ㅎㅎ
What this is free energy?ruclips.net/video/VN0Ikpdgezo/видео.htmlsi=AS6uVDdkw9Od_74L
wrong mistake
Чужое изобретение проблемы в международном суде
I am interested in interacting with your channel, and your work is great and educational, but I ask you to mention the names of all the parts you used so that we can repeat this experience and have greater interaction, or write in the description box, as everyone does, the name of the part used in the experiment and the online store from where you can get it. We buy it. Thank you
Nice try Peter, I guess it cannot be done if you can't do it.
Altenator butuh 12v dc untuk exiter agar terbentuk medan maknit di stator
Sorry rotor
Remove the bridge rectifier from the alternator and build a PM armature. Then you'll have something.
Yeah a worse generator
@@shaynegadsden Perhaps it's possible that you know a better way?
@@shaynegadsden ...If so, then please.
@@James-W6WOF there isn't a better way because it's bullshit but if you want a generator for whatever reason buy one don't attemp to make it for many reasons first tolerance is efficency in a quality unit the armature is just barely clearing the windings whereas home made has a large gap due to inconsistancy, second it's dangerous most expoxy's sofen with heat and generators get hot also the armature should be balanced you spinning it pretty fast. But not matter how good it is this kind of thing will never work 90% is very high efficency for a motor or generator meaning if you give the motor 1000w of power you will get 900w of rotational force then the connected generator takes that 900w of force and makes 810w of power so you have lost 190w in the process you will never gain power
@@shaynegadsden Perhaps it's my fault for thinking that the gentlemen's project was just something to pass time rather than creating a viable product?
That said, I'm pretty sure everyone knows what these types of video's are about (entertainment). But may mistake...
I love your adjustmentable aluminum frames. I love your work. Where do I find the parts to make this, the frame and motor.. Thank you and may God bless you abundantly.
Michael in Maine, USA
Have you found these frames?
Das an meiner Anlage wäre super 👍👌
Thousands of other inventors show us in their videos,
how to successfully generate electricity from scrap with simple means.
You, on the other hand, use new and expensive parts,
and still don't get it baked.
The other people show us their successes,
you, on the other hand, keep repeating your lack of success.
Aren't you normal?
Or do you get paid to
that you keep showing us your failures?
-
😂😂😂
is this for sale st Walmart yet? I want this to be a new member of my family. excellent work!
Thanks for the effort, but have you tried switching the connections…. It could be a polarity issue…. Also, the some sort of capacitor in the circuit… it should act as an energy buffer…
Yes, I tried to connect the connections, but I haven't tried adding that capacitor. Do you suggest any specific capacitance that could be sufficient?
What this is free energy?ruclips.net/video/VN0Ikpdgezo/видео.htmlsi=AS6uVDdkw9Od_74L
Izgleda da je bas ta caka, "zakon o samoodrzanju energije!?" Zao mi je truda, pucanja bonusa kod ljudi, zivaca, sredstava, matretiranja oca, pokusao sam, ne ide! Tuzno! 👿
Ostaje mi jos zamajna masa u direktnoj sprezi, akumulator i kondezatori... Nadam se naj , naj... Ali... Ko ovo izdominira....ima swe...
Is there a generator that produces more energy than it requires to run?
Apply power to it the way you connected
ok...there is a issue here. 1st of all, you didn't have a battery in line with it. This would not only start it up but bring it too speed in order for the alternator to be able to generate! The battery also provides a voltage inside of it to excite the coils - other wise it will not generate output to begin with, (It's referred to as "Alternator death"! alternators will not put out until it gets power to help coils in excitement ......(Ask any married woman about this mystery) LOL. Once it runs,....you should see voltage going into battery. You also could have tried a GENERATOR unit as they are designed to generate voltage while rotation is present but no power or battery needed.....generators are DC outputs and are pretty linear in operation...(Remember having a generator on your front bike tire to feed your headlight at night)??
Wrong, vehicle alternators are self exciting via residual magnetism.
Nice job but I would appreciate the info on the black connector make and model info used a link where to get it thanks
Everything has losses. If you put 100W of electrical power into a motor, you don't get 100W of mecanical/rotating force from the rotating shaft, instead you gott less because of resistance in the cables, in the connectors, in the windings, in the air, in the bearings and so on. So you have to invent a zero resistance motor. But if you did, you'r still not get more then 100W of mecanical force from the shaft. The exact same thing can be said with the generator. If you put 100W of mechanical energy to rotate the shaft, you don't get more than 100W of electrical energy out from it because of all the reasons I mention above. Even if you had a perfect generator with non resistance, you would only get exactly 100W from it.
And there you have it, a perfect motor connected to a perfect generator both with zero resistance, a perpetual motion device that can sustain its own motion but nothing else. If you would draw 0,00001W from it, the balance is off and it would slowly slow down untill it stops. Nothing usefull at all.
But we all know that zero resistance motors and generators does not exist. But even if they did exist, you would never get any extra energy out from it to use.
But anyway, good luck with you toy.
It's good to see that there is still some intelligence out there 🙂
Change de polarity of motor , or turn the wire in others direction and they work
Generator Output
Your set up looked good so I guess its just not possible.
its impressive , but this motor connected to car alternator getting too much hot. it ca not be used for more than few minutes . because Car alternator becomes hard after becoming magnet with 12 Volt DC Current which makes motor very very hot. . . so it is not feasible.
Betreibe den kleinen Motor doch mit 24V 10A und schau dann mal wieviel Strom der Alternator Lichtmaschine bringt.... also watt. Wenn die lichtmaschiene wirklich 24v 120A bringt wäre das nice .Und nen Zwischenspeicher fehlt so geht das nicht.
I'm amazed at how many people still think that you can create more output energy that the input energy, its not even close; If it was possible then we would have perpetual motion...perpetual motion is impossible...physics does not lie...
"We would all be better off if Newton had asked HOW the apple got UP there in the first place..."
Ciao, non ho la conoscenza per costruire una cosa simile , tutti insistono a dire che non è possibile e che non esiste il moto perpetuo. Ciao 😊
talk to me about flywheel energy storage, then you see something spinning forever
Looks like a spendy lesson in frustration to me!