DUCATI'S FIRST MOTORCYCLE, THE CUCCIOLO A JEWEL OF AN ENGINE EXPLORED AT TWEED'S GARAGE
HTML-код
- Опубликовано: 5 сен 2024
- MR TWEED BRINGS YOU A SHOW AND TELL OF HIS LATEST PROJECT, IT'S THE SMALL BUT PERFECTLY FORMED DUCATI CUCCIOLO ( LITTLE PUP ) , A 50CC ENGINE OF INGENIOUS DESIGN AND ENGINEERED TO A HIGH STANDARD. SO GRAB A BREW AND MARVEL AT THIS FINE ENGINE......APOLOGIES TO ANY ITALIANS JOINING AS MR TWEED'S ITALIAN PRONUNCIATIONS ARE DREADFUL
Looks like a great deal of fun. A nice little bit of a history lesson too.
Just think, when you are all done, you can putter about the town, and ignore the people who say you and your engine are barking mad. LOL
oh very good Sir
Gee whiz... a new project and a history lesson! The only Italian I ever bothered to learn was "Ya got a nice business here... be a shame if sumthin happened to it" Guaranteed to get you a discount. Cheers
Iowa's answer to Don Corleone.......sounds like you've got the hardware store's attitude sorted out.
Cool little engine with a very interesting back story.
Glad you liked the story 🙂
What a great project and that's a sweet little engine. I look forward to seeing progress.
Cheers, Peter.
it is indeed Peter.
Always good engineering from the Italians Mr T. Alvis compares well as they used their in house foundry. Variety is the spice of life at the Tweed garage clearly. Thank you for posting.
I didn't´t know that Mr B, one to squirrel away in the old noggin.
That's a cracking bit of kit, slightly different engineering to an Excelsior! Well Villiers, really.
Your not wrong there
ciao bella cappuccino duo nice lilltle engine!
Intricate, small four strokes are fascinating. In the U.S. we had the Whizzer, a side valve kit engine, about 150cc IIRC. The transmission method with the balls actuated by a rod was apparently fairly popular with small motorcycle makers. My 1957 Zundapp 200cc had that as well as some Japanese makes, Tohatsu (50cc two-stroke, 3 speeds) being one from 1963 or so.
Excellent information, I´ll store that away in the old noggin for future reference :-)
I carried one of these over to Australia from New Zealand as hand luggage. They only checked it on the Aussie side...unzipped the bag, and zipped it up again straight away. For a mates mantlepiece.
Well played Sir
Wow! Just wow! Typically Italian engineering but that gear selection system, even by their standards, is so elegant! Spent a lot of time in Italy training over the decades and I was always impressed by their ingenuity and design prowess, compared to brutal German engineering!
And don't forget their ice cream 😋
@@TweedsGarage I actually managed, when challenged, by a lovely cafe owner in Sorrento, to taste everyone of his 54 varieties! Success was FOC.... Failure would have been extremely expensive 🤣😔🤣!
@@TweedsGarage Gelato,old boy. You mention Icecream to Italians and you'll get crushed nuts without asking for them.
Oh,yes, the legendary Ducati desmo-comic valve train.🤪
it's a great idea.......until you have to adjust them.
Ivan from Shed Racing has two very nice examples of these and he's often over in Italy. He may be able to help you out with a source of spare parts.
Best wishes, Dean.
I´ll have to pull my finger out and get the Riley over there ( I did say I would after chatting with him on a visit ). He has got a nice collection of tiddlers .
@@TweedsGarage yes, he has a nice set up. You'll enjoy meeting John, he is a legend.
Beautifully engineered little thing that. My father had a BSA Winged Wheel in the shed for years, if I remember rightly it got swapped for a pair of replacement sills for his Volvo he was trying to keep on the road. Looking forward to seeing you work some magic and getting it running again.
I did have a Cyclemaster which was very similar but with its rod brakes in an old bicycle it was slightly terrifying so was moved along once I got it running .
I remember the Power Pack. I found a reference to Lee Warner who was ambitious enough in 1955 to use a Power Pack to get him to Australia from Britain returrning via San Francisco to New York. In your estimation how far do you think he he may have gone? No reference to the manufacturers willing to sponsor him!
he's mentioned in " The Stink Wheel Saga" which says " the four figure mileometer on the Power Pak read 5´501 miles on the second time round (15´501 miles ) on the one spark plug!!!!!
The British have always been terrible for spotting a marketing gift when it's presented to them on a plate......just take "The Italian Job" which elevated the Mini to an icon, the film company had to buy all the Minis used in the film as BMC refused to supply them any when asked......if it wasn't for the producers being so patriotic the film´s starring cars would of been Alfa Romeo as Fiat and Alfa where on too willing to supply cars for the film.
This is priceless!
What a charming motor. Thanks for the detailed look around. 👍
my pleasure
Just don´t have the guts to open those cans of worms, Mr. Tweed. But I know you have those wonderful lathes in your shop so you can order all sorts of parts if they´re available and produce the rest...now there´s a rootin´-tootin´trailblazer in the fixer-upper scene! Especially that shifter shaft needs your special attention for sure! I wouldn´t be surprised if you´d tried your hand at making spare needles and cages for some of those bearings. The sky´s the limit for a gifted ingegnere (little Italian there)...
Thanks Andreas.......and nice bit of Italian there 😀
Wow thanks for that. Been a Ducati rider since 1976 but never seen inside one of these, or owned one come to that. Good luck with locating the chain wheel pedal thing. 👍
thanks Chris
Hello from New Zealand. Thanks for this video, ive a '64 Ducati 100 Mountaineer. 2 stroke near complete restoration. Just need the rear mud gaurd/tail light assembly, and the rrar carrier rack. Very interesting looking at this engine. I always thought they were a 2 stroke, nice to see its not
that would be one of the cowled fan cooled motors, very rare over here as they were never imported, but much rated by Alan Cathcart
@@TweedsGarage yes sir, yes it is. 3 speed on the left hand, cable pull, pull system. Twin sprocket rear. Mines running, a get a lot of looks riding it around. Not fast 60kph with 12 tooth front sprocket, 1 made a 16 tooth for on road. But with 12 in front, 60 on rear. you'll be lucky to get 35kph, but it will climb any gill you point it at. LoL 🤣. It's a bit to ride
That’s fascinating, beautiful piece of engineering
Thank you for one of the best video's i have ever seen on you tube. i was engaged and mesmerised for the duration of the presentation. on a mechanical level, i dont understand how a single bb within a drive shaft can hold a gearbox cog in place ? if you have time one day, maybe you can you tell me ? keep doing what your doing xx
Hi Dave, there are three ball bearings equally spaced within the shaft that when raised engage with three half round slots within each of the two gears, quite ingenious. Thanks for the kind words, the cheque's in the post 😁
That, Mr. Tweed, was absolutely fascinating. All the way through I was thinking Blimey, that can't have been cheap... I had an Italian designed bicycle engine in the late 60s. A Mini-motor. Made or imported by Trojan, who made bubble cars and things.(Went on to manufacture condoms in America, as far as I can tell... Quizzical eyebrow raising)... Looking forward to this project. Would be nice to see it fitted to a period pushbike. Sit up and beg, rod brakes, bicycle clips... Well done, that man. 👍
that is a strange business diversification .......must of been one of those " blue skies thinking " boardroom meeting ( probably conducted in a pub . :-)
Ha Ha! You could make that desmodronic and get a few more revs out of it! Very interesting. Chris B.
Have you seen my video on adjusting desmodronic valve gear Chris?.......it was the first abd last time 🥴
@@TweedsGarage That must be the only video of your I have missed! I will view it straight away! Chris B.
really is very nice, can I assume you are in some kind of competition with Dominic Chinea to have as many projects on the go as possible? :) - I've partially dismantled my recently acquired BMW r25 so I assume the correct thing is to try and acquire a new project at tomorrows autojumble before I complete it? ;) - love the videos - now have urge to acquire a lathe
You'll never regret the day you buy a lathe Richard ( just do some research or take someone along who has a bit of experience on them, ( don't dismiss a used English lathe because it's imperial, or milling machine, just budget for a dro and imperial/metric maching is easy ) .
You probably need another project whilst you're awaiting parts for the current project 😁 ......and I'd be fibbing if i said i didn't have something on my eBay watch list 😉
@@TweedsGarage do you recommend any beginner channels or books - I'm of the age that when I was at comprehensive school we had a pretty good machine shop (having a local builder of helicopters probably helped) but we also had the beginnings of a computer lab so while my first car was an MG midget the same age as me that needed a lot of fettling (one of the last to site O levels) I've not touched a lathe since then having spent the last 30 yrs in software engineering
@@RichardHarding44 RUclips is a great source, I would recommend @blondihacks, go back a year or two and follow her engineering journey starting on small projects and now building a 5¨gauge locomotive. @joepie is really good for work setups on lathes and milling machine and
, screw cutting tips and working with rotary tables etc and @Abom79, again go back about a year as the latest stuff is based mainly on setting up his new workshop and getting started on CNC machines, but the older stuff is at his home workshop on his collection of older machinery and lastly for superb quality engineering check out @InheritanceMachining. Books are a bit harder, I´ve got a collection of older books, a selection of Workshop Practice Series ( tend to be based on single subjects ) and an edition of Machinery Handbook,Some people find books a great learning format but I struggle with books, I start reading but after a few pages when it starts getting technical, brain fog sets in and nothing else goes in, but seeing it and doing it is the way I learn. The trouble with most of the books are they are either very basic ( selecting tools, machinery and setting up a workshop) or go full on technical ( for those with a good engineering knowledge ) and most of them are reprints of books written a long time ago so don't cover the advances of tooling / machinery that's about today ......so as I said at the start RUclips and the internet is your friend........hope this helps
Time for another video Mr Tweed, I'm getting withdrawal symptoms. 😂😂
Patience my good man.......there's always the back catalogue 😉
That looks like an interesting engine, I don't think I've seen one before. Seen plenty of add on motors to run on the tyre or fitted to the wheel. A local bike shop was an agent for them and they seemed to be regularly in for repairs.
The French version would have been the VeloSolex, which sold in vast numbers. I bought one from an old chap who'd had his since his school days back in the 50's. I paid 50€ for it, running but a bit scruffy. They're popular again and a rough one will set you back at least 400€ today.
I think your next purchase will have to be a bicycle of the period to fit the motor to. Might have to have better brakes though unless you fancy letting Jenkins take his chances.
Nothing wrong with showing the viewers your feminine side.👍
Thanks for a very interesting look at the Cucciolo.
I did have had a selection of Mobylettes, Paloma and a Velosolex, most were good but the velosolex was dreadful, might be good on flat Northen France , Belgian and Holland's roads but absolutely hopless on the Hampshire hills ( it was actually quicker cycling to my favourite cafe than riding the Velo, which had to be pedalled a lot, broke down quite often and kept shaking itself to pieces on a regular occurrence)......i was glad to see the back of it. I think the Cucciolo will be a happy experience......and chassis options are being looked at 😉
They are lovely little things Tweedy.
They say the best things come in small packages ..........nudge nudge wink wink (in a Monty Pythonesk style)
@@TweedsGarage that's what I tell people. I have my reasons!
Makes all British designs look crude and this was well engineered
Indeed it does
Who was that sexy beast in the intro. 😆 well you've got me hooked. Chow.
🤣 tu, ragazzo cattivo Terry
Molto bene Mr Tweed , a most interesting dissertation , only caught a brief view, looked like the ring groves well oversized , or was a trick of the light ? Anyhoo thanks and good luck .
thanks Clive, I´ll have a closer look at the piston grooves
At the time it was sold into a nice wooden box
Thanks for that, that's interesting, i wonder if any survived🙂
Bloody continentals and their odd shaped balls!