Lure Making Deep Diving Crankbait - part 1
HTML-код
- Опубликовано: 3 июл 2021
- This time in my lure making tutorial I did challenge myself to deep diving crankbait. I didn't have any experience with this type of lure and also needed to free hand the bib... I still didn't test the swimming action but so far I'm happy with how it turned out 🙂 so follow along with this build and give it a try as well if you like 😉
Хобби
Looking good! Keen to see it swim
Me to, very much 😋 I hope I didn't messed up with the oversized lip 👀
Super Arbeit und ich wünsche dir viel Spaß beim Bemalen
danke 😊 ich hoffe es fischt gut und ich kann ein paar schöne Barsche und Zander fangen 👌 werde es in der nächsten Folge erfahren 😉😉
@@SuchaJerkCustomLures echt nice von dir jeweils in der Landessprache zu antworten
Nice lure
Thank you 🙏 I'm happy you liked it 🙂
Buen trabajo amigo 👍🏼👍🏼👍🏼
Muchas gracias amigo 🙂
Parabéns pelo trabalho ficou top
Vidio ini bermanfaat bagi kami yang ingin belajar membuat umpan sebagai pemula
Заранее спасибо большое за классная видео удачу.... зачёт
спасибо за ваш комментарий 🙂 я рад, что вам понравилось видео ☺️
Mantaplah bang👍🏼👍🏼👍🏼
Terima kasih 🙏👋 semua yang terbaik dari Polandia 🇵🇱🎣
@@SuchaJerkCustomLures alhamdulillah 🤲🏼
Perfect friend
Thank you 🙂
Is the best friend 😍👍
Thank you friend 🙏🙂
Большое спасибо!!! Очень понятно и классно. Много нюансов я увидел. Молодец!!
Я рад, что вы смогли кое-что узнать 🙂 это цель этого канала 👌 Я также надеюсь, что вам понравилось видео - обязательно ознакомьтесь с частью 2 😉
p
PP ppppp
pp
PP p
Espectacular saludos cordiales 👍👍🇪🇨🇪🇨🇪🇨🇪🇨
Muchas gracias e saludos desde Polonia 👋 🇵🇱🎣 buenos señuelos mi amigo - me suscribí a tu canal 😉
@@SuchaJerkCustomLures gracias Desde Ecuador ya me suscribo igualmente bendiciones
Nicework master... Godbless
Thank you brother 🙏 all the best from Poland 👋
Muito bom o trabalho , top
Muito obrigado 🙏
Спасибо.Все понятно и доходчиво.
Двухкомпонентная полиуретановая смола для литья под давлением 😉
hadir bang mantap pembuatan nya itu bah keren banget
Terima kasih kawan :) semangat :)
good job
Thank you 😊
Dobry!!!!! 👍👍👍
Dzięki 🙂 pozdro 🤙
👍
🙏💜
Está muy bien ese lente muestra un saludó 🙏🙏🙏🙏
Gracias 😊
Great start.. sure it will great !!
One question please : which type of uv light did you use to polymerise the uv resin ? special power, lumen, or number of led is required ??
Thanks for sharing and helping me to learn...😉
So here I'm using UV torch light for fly tying - not the most efficient thought! Now I bough cheap nail art UV LED lamp and it works much faster and make the coat much stronger !! That is exactly the same model that I have now 😉
www.amazon.com/dp/B086MJ1YYZ/ref=cm_sw_r_cp_awdb_imm_JY732SXATVS1GWTPS1CF
many thanks !
👍👏
🙂
Hello. Wery nice works... I'm impressed with your special plier tool, whit one side round and another is flat.... I've never seen one like this. It's your own creation or somewhere can it buying...😁
Thank you 😊 the pliers you can buy on AliExpress:
a.aliexpress.com/_vEVgw1
What size blade do you use for your coping saw..? It looks thinner than the blade I have and it was the smallest I could find... Great video.!
I'm not sure... Could be 1.2mm will reply again when I will check it properly 😉 also one broke during cutting the bib 😋
Try search at lazada
Simply saying, What's it kind of saw?
Pahinge poh idolo from oslob Cebu ph
🙏🙂
Excelente video amigo, una pregunta, qué material es el babero ?
Mil gracias, el material del babero es una placa de circuito, hecha de fibra de vidrio y laminado de resina.
Muchas gracias, eres todo un maestro !!
Pero esta la fábricas tú o donde la compras ?
Es que yo soy de Colombia y no la consigo en mi país
parabéns pelo trabalho, qual e esse tipo de madeira que você usa ?
Great video! What did you use for the through wire? I may have missed it.
Thank you 🙂 it is 0.6mm stainless stil wire 😉 the front part is highwired to create a line eye and sturdy boom to support the bib 👌
Thanks
Great job. What material did you use for the bib, and where you get it?
It is the glass fiber and epoxy laminate - it is used to make circuit boards - so your best bet would be electronic part shop - could be second hand still usable 😉
@@SuchaJerkCustomLures @@s@@@s@@@ßR4E44AAAÈe ere al
凄!
WOW!it'sexcited!
Thank you 🙂 check my community tab for the paint job post 😉
Hello, teach ocean trolling bait please.
Hi 🙂 I'm not convinced if I should try, I have no access to any boat, even freshwater, so no way for me to check if the lure would actually swim correctly in the trolling, and I don't want to teach to make lure that is not tested, potentially doesn't work well and many people might lose time and materials trying to copy it 🤷 that's why I only make tutorials of lures that's are tried and tested by me 😉
I lovet
Thank you :)
Great job master...😊🙏
What kind or name to make lips for this crankbait?where i can find them..?😊😊
Thank you 😊 it is glass fiber and epoxy laminate, is used to made circuit boards, you can try to ask in some electronic parts shop 😉
Thank you for much,master...🙏🙏😊
I'm Indonesian angler,your video is great idea for my to make a some lures...😊🙏👍
This guy is a craftsman. Not many of them in lure building
Thank you for your kind words 😊🙏👋🎣
Hi, are you trying to seal wood with two component cianoacrylate glue?
It is my go to sealer - cianoacrylate/super glue 🙂 it's very effective on balsa wood as hardens it significantly aside of sealing 😉 any how once that sorted I also apply layer of epoxy(so the super glue is more of a strengthener than sealer) for smooth surface before painting/foiling :)
I dip in lacquer sand and sealer then epoxy
Friend, what is the name of these paints with which you painted the fish?
I replied under your second comment 😉
👍👍👍⭐️⭐️⭐️⭐️⭐️⭐️⭐️🐠🐠❤️
ขอบคุณสำหรับการสนับสนุนอย่างต่อเนื่องของคุณ ☺️ สิ่งที่ดีที่สุดจากโปแลนด์ 👋
Dziesięć i pół toż to piwo z lat 90-tych skąd to wziąłeś?
Nie wiem czy dalej mieszkasz w PL, ale we Wrocławiu jest w każdej Żabce 😉
hey guys! why don't you like comments?
I like all the comments 😉 thank you for supporting the channel 😊
You really need a band saw
Well is not essential but indeed would speed up the process 😃 when I will be done moving to new basement/workshop I'll look into it 😉
@@SuchaJerkCustomLures I make crank baits we cut the baits on a band saw and punch the bills on a press. That coping saw looks like it would be a pain. We also use lexan for most of our bills. I’ve found circuit board cuts pretty easy with some heavier duty scissors.
@@timg185 thanks 🙂 I very rarely cut custom bills - normally I have them cut to my specs on CNC machine - but thank you for the tip I might try the scissors option 😉
🙂👋🇵🇱
Can you send me a link for the putty filler you was using please 🙏
I'm buying everything locally in Poland. So I don't have a link option 🤷
czego używasz do zaklejania tych dziur w woblerze ?
Szpachli dwuskładnikowej do szpachlowania karoserii 😉
smarujesz je w środku i na zewnątrz żywicą epoxydową ?
Ten model akurat sklejalem żywica 5min z racji skomplikowanego stelażu i steru, normalnie sklejam na super glue - ale ma on to do siebie że tylko przytkniesz i już sklejone, jak krzywo to już nie rozłączysz !! Tutaj nie chciałem ryzykować. A potem już standardowo kąpiel w super glue dla utwardzenia balsy i standardowo żywica przed folią, żeby ładnie przylegała 👌
@@SuchaJerkCustomLures czyli lakieru nie stosujesz , sama żywica wystarcza.
@@artuchigo3744 zamiast lakieru jest super glue: gruntuje + utwardza a potem żywica 😉 w lakierze już nie maczam bo za dużo strat i zbyt słaba ochrona przed uszkodzeniem
@@SuchaJerkCustomLures dzięki za info . Czekam na kolejne filmy
Why the super glue bath, exactly?
Hi again 👋 two reasons: for the harder wood like bass wood or ash, it's simply a sealant, so I can attach the weight and test it in the water tank. For balsa aside of being sealant, additionally it hardens the wood significantly. Of course there are other wood sealers, but this one is instant, after 2min I can continue work on the lure
@@SuchaJerkCustomLures awesome, perfect!
Good evening. What material are you using?
Wood:balsa
Wire: 0.8mm stainless steel
Lure lip: circuit board
Paints: Mr Colour
Epoxy: slow curing two part epoxy
@@SuchaJerkCustomLures Super 👍👍
It's very difficult and quit long to make it. Wouldn't be simpler to make that from molding plastic? But I should say it's well done. You are great diyer.
Sure moulding out of silicone form is also idea 🙂 still will be fairly difficult to prepare the wire harness even for the mould, unless you go with screw eyes 😉
How many languages do you speak
😋 me only Polish and English, my wife Italian, Spanish and Portuguese all the rest is Google translate 😉
@@SuchaJerkCustomLures interesting. Do you know japanese as well?
@@christopherram8948 only few words from hearing, lots of anime and Japanese fishing videos 😉
Know what’s blows my mind?
Y’all have printers that you can get EXACT SIZE of bait fish and characteristics down perfectly then.
And y’all hand draw this sh*t out… and try and make it look realistic off memory or pics on the computer when you LITERALLY COULD HAVE SHAPED IT FROM THE START OFF THE ACTUAL BAIT.
Like wtf why?
It's called passion and craftsmanship 😉