Not sure if you will see the brother but if you do could you please let me know where you get your stainless wire from? I have a hard time finding it in straight lengths like what you use. Cheers all the way from Aus.
Very nice batch of baits excellent crath man ship!!! BSI finishing resin is what I youse for clear coat it is excellent, fin and does not have much bubbles great stuff!!!
Immortal - At the heart of Winter. To me, the best ever black metal album. Oh, and the bait is pretty damn nice, as expected. It's really nice to see you do a crankbait. Greetings from the Netherlands
At the heart of winter was one of my earliest black metal albums i heard so it always will have a special place in my heart altough i think overall my fav is pure holocaust.
@@SolarfallBaits that one's fantastic too, agreed. Btw, would be real nice to see you make a spoon again. Also cause for all i know they still like to use them up there in canada. Blashyrkh mighty raven spoon.
Love the look fishermen would buy but the fish wouldn't care... plus you should have bigger hooks. Now with all that said very beautiful job. Your skill is exceptional.
I’m sure you already know the ‘baking soda and superglue’ trick. That would have worked great for securing the through-wire if you immediately wish to continue working on it 👍🏻 it also allows instant sanding if you use it instead of the bondo to secure the lead 👌🏻 Amazing work as always 👌🏻👌🏻👌🏻👌🏻👌🏻
i usually work with batches of baits so i don't really require an instant dry time. usually when i'm finished with the last bait i can start sanding the first one.
Excellent video, I asked for a striper but its ok... hahahah I asked for a golden dorado swimbait as well and it never came either... hahah Great job AGAIN!!!
Parabéns pelo seu trabalho... Incrível. Admirando pra caralhooooo rsrs 👏👏👏👏👏👏👏 Se der, mande uma de presente pra eu usar aqui no Brasil... Sucesso...hoje é sempre...
My friend Todd used to make The Phantom Lure line of muskie glidebaits before he passed away a couple of years ago. I'd hang out at his shop and watched him work. When he did his final epoxy clear coat he'd take a Bernzomatic propane torch and lightly sweep the heat over the epoxy. This brought the air bubbles to the surface where they'd burst and disappear. Then he'd put the lure on the rotating drying rack. Hold the flame away from the lure about 1 to 2 feet. You don't want to burn the lure, just lightly heat it enough so the air bubbles disappear. A couple of quick passes with the torch should do the trick.
Great job! Beautiful baits! However, the technology is rather complicated and time-consuming due to the wire loops. I make it much easier and faster from a solid piece of wood, because I use a screw-in loop. 18:15 And in order for the paint to hold well, I must, before painting, process the surface with sandpaper so that it becomes dull and only after that I apply a primer and paint. It is very important ! And I showed this in detail in my videos...
Its true that there are easier ways of doing this but would defeat the purpose of showing an alternative way of going about this and thats kind of the whole point of the video.
I never liked to shape the lurebody with wire harness and lip already glued in , as these often get in the way of knife strokes and sandpaper passes . To overcome this , I had just pinned the two halves together with two or three crosswise pins(pieces of toothpicks or kebab sticks or wire pins) right after having them sawed out , so that I could work them down symetrically and afterwards still be able to separate them again before any glue would be applied . Best greetings , Dieter
Seeing as you have a dremel, why not use it to cut a groove for your through wire to sit in? It makes for a nice, snug fit and you dont need to make all those fiddly spacers! That's how I do my two-part baits. Fantastic overall result though. Great work!
Beautiful bait. I have made a few deep divers. some worked and some did not. I don't know enough about the physics to understand why. I sometimes have an issue with the bait wanting to dive, but not wobble - it does this porposing thing, bobbing up and down, but not side to side. do you have any thoughts what I am missing in my understanding? Tried moving the line tie up and down the lip. Thanks.
How do you keep your wood from splitting when making the weight hole? I tried with a drill when making a simple lipless bait and ended up splitting part of the nose off. Also what kind of wood?
It really helps if you use quality drill Brad point drill bits, fostner bits will work nicely as well. To be honest I don't recall what type of wood this was, it came from wood palette so it could be anything.
@@SolarfallBaits thanks, will look into some proper drill bits, quicker than dremeling out the hole to a specific diameter, save the dremel for shaping and carving :)
@@SolarfallBaits Thanks for the reply. Your paint-jobs are amazing. They inspire me. Though, I should probably figure out how to make my lures have a proper action first... lol
Nice video! That carving knife with a red handle you use looks very mutch as a classic Morakniv. Is it maybee a tool you brought from Soumi? Greetings from Stockholm!
@@AnotherGuyFishing i sometimes sell my baits you might see me making on the channel. I have a website but its on pause now since i dont have time for making batches right now
Love videos from you. Could you share the "biggest secret" what are you using for cleaning brush after applying epoxy? or is it a new brush after each bait? :)
Fantastic skills, which make it look way too easy =) One question: what is the magical brush you use for Epoxy coating, or how do you treat it after coating to keep it soft and bendable?
Thanks for the detailed video. Learning a lot watching your builds. It is clear to me that I’ve got lots of room to improve. By the way, I listened to SolarFall. At first, really was digging it, but that vocalist.... I’m sorry, not my cup of tea. Instrumentally, they’re amazing.
Alright folks lets make a crankbait!
Good to see your back 👍
SolarBaits yeah metal music let’s hear it 🔈make two videos one with metal music one without Keep the videos coming
Not sure if you will see the brother but if you do could you please let me know where you get your stainless wire from? I have a hard time finding it in straight lengths like what you use.
Cheers all the way from Aus.
@@rebornpho5716 i got mine from ebay
Hey Solar, did you use the vallejo liquid silver? Is there much difference with the vallejo air silver color?
Fantastic work! So glad you chose the deep diving crank bait and the paint scheme was on point! Wow!
watched like 2 min and I'm impressed. You have tools!
Very nice batch of baits excellent crath man ship!!!
BSI finishing resin is what I youse for clear coat it is excellent, fin and does not have much bubbles great stuff!!!
Great workmanship, they look beautiful
You’re air brushing is on point mate👍🏽
Your painting skills are remarkable.
Love your baits man, beautiful action on this one!
As always enjoyed watching thank you SolarBaits ...
I'm very impressed at your wire bending, I'm a Dental Technician and use similar tools for orthodontic appliances. 🎣🎣🎣🏴🏴🏴🏴
Another beautifully made bait always enjoy your videos.
thank you, I appreciate that!
That’s very impressive to say the least. I already paint baits, but think I’ll try and custom make a few of my own now.
wow, i love your craftsmenship and attention to detail 10/10.
That is some fine craftsmanship!!!!!!!!!!!
I really like your work man. Like all the time. Congratulations. From México.
Great build. Love that you make most all of your bait components.
Man I love when I see a notification from you! Made my day
You’re work is impeccable. Get yourself the little Ryobi bandsaw....you won’t regret it
Did you move to Canada just so you could get closer to Blasphemy? And maybe get them to, finally, record a third album? ;)
So many great baits from you! Lots of imitators but these vids and quality baits are the sh!z 🤙 glad you’re back rockin’ and rollin’ my man!
Fantastic Work!
I just relax and watch
Greetings from Germany ✌
True artist man ! Well done 👍
Fantástico me e quedado hipnotizado viendo el video que artista y el resultado final impresionante.
Good to see back around...you were gone for a few...Make us some baits and catch some fish for us please....
Love your Painting job , inspired
So, more ''bait" making fun! So, have you discovered Candiantire!!! Wait for the specials! Can't wait for a fishing video, the great northern pike!
It really depends when i can afford to buy an action camera to film any fishing.
@@SolarfallBaits I hear you there, those aren't cheap! I would imagine you need a boat as well, or did you manage to ship it over?
Every time I watch one of your videos It makes me to Want to make my own lures
Metal for inspiration 🤘🏽🤘🏽🤘🏽
Legend wait for it ..... Dary !!
Immortal - At the heart of Winter.
To me, the best ever black metal album.
Oh, and the bait is pretty damn nice, as expected. It's really nice to see you do a crankbait.
Greetings from the Netherlands
At the heart of winter was one of my earliest black metal albums i heard so it always will have a special place in my heart altough i think overall my fav is pure holocaust.
@@SolarfallBaits that one's fantastic too, agreed.
Btw, would be real nice to see you make a spoon again. Also cause for all i know they still like to use them up there in canada.
Blashyrkh mighty raven spoon.
Man these are awesome! Great talent!!!
Absolutely beautiful bait
As always awesome Mikko
Love the look fishermen would buy but the fish wouldn't care... plus you should have bigger hooks. Now with all that said very beautiful job. Your skill is exceptional.
Holy shit you are good!!! No one compares! I'm ready to buy!
Amazing lure 😎👍
I’m sure you already know the ‘baking soda and superglue’ trick. That would have worked great for securing the through-wire if you immediately wish to continue working on it 👍🏻 it also allows instant sanding if you use it instead of the bondo to secure the lead 👌🏻
Amazing work as always 👌🏻👌🏻👌🏻👌🏻👌🏻
i usually work with batches of baits so i don't really require an instant dry time. usually when i'm finished with the last bait i can start sanding the first one.
@SolarBaits That makes sense! 😂👍🏻 I’m not even a lure angler (I tie pike flies) but I still love watching you and also Marlin Baits 👌🏻👌🏻👌🏻
I love your work, I learned a lot from you!
Parabéns pelo seu trabalho está isca artificial artesanal ficou muito bem elaborada 🐠
Excellent video, I asked for a striper but its ok... hahahah I asked for a golden dorado swimbait as well and it never came either... hahah Great job AGAIN!!!
I actually like the golden dorado swimbait idea so i might do it at somepoint.
@@SolarfallBaits Dont play with my emotions please! Greetings from Argentina
Parabéns pelo seu trabalho...
Incrível.
Admirando pra caralhooooo rsrs 👏👏👏👏👏👏👏
Se der, mande uma de presente pra eu usar aqui no Brasil...
Sucesso...hoje é sempre...
Amazing as always!!
Sensacional parceiro! 👏👏 Saudações do Brasil.
My friend Todd used to make The Phantom Lure line of muskie glidebaits before he passed away a couple of years ago. I'd hang out at his shop and watched him work.
When he did his final epoxy clear coat he'd take a Bernzomatic propane torch and lightly sweep the heat over the epoxy. This brought the air bubbles to the surface where they'd burst and disappear. Then he'd put the lure on the rotating drying rack. Hold the flame away from the lure about 1 to 2 feet. You don't want to burn the lure, just lightly heat it enough so the air bubbles disappear. A couple of quick passes with the torch should do the trick.
I do the same thing with a hot airgun to get rid of the bobbles.
@@SolarfallBaits Sorry, I didn't know you knew about that method. I enjoyed the video. Thanks
@@thelonesomefisherman7425 no worries i dont think i showed it in the video.
Тоже делал воблерки из трех частей для дальнего заброса все хорошо только плестиглаз ломается об дно особенно в ноябре когда вода холодная
Great job! Beautiful baits! However, the technology is rather complicated and time-consuming due to the wire loops. I make it much easier and faster from a solid piece of wood, because I use a screw-in loop.
18:15 And in order for the paint to hold well, I must, before painting, process the surface with sandpaper so that it becomes dull and only after that I apply a primer and paint. It is very important !
And I showed this in detail in my videos...
Its true that there are easier ways of doing this but would defeat the purpose of showing an alternative way of going about this and thats kind of the whole point of the video.
@@SolarfallBaits OK. Each method has its own advantages and disadvantages.
@@SolarfallBaits OK, that's right. Each method has its own advantages and disadvantages.
Oleg your pretty good but ................🤷🏻♂️🤦🏻♂️
you are great~!! you are my teacher~!!
Another badass build I would just hang them on the wall I’d hate to lose one Great video
I never liked to shape the lurebody with wire harness and lip already glued in , as these often get in the way of knife strokes and sandpaper passes .
To overcome this , I had just pinned the two halves together with two or three crosswise pins(pieces of toothpicks or kebab sticks or wire pins) right after having them sawed out , so that I could work them down symetrically and afterwards still be able to separate them again before any glue would be applied .
Best greetings , Dieter
That action. Wow!
You make my day ! I'm jealous ! It's a pretty good job :-)
where do you get those wire bending pliers from...or what are they called
They are called round nose pliers. Any well stocked hardware store should have them.
thank you
il plexiglass che spessore?
Great great. I've seen you use those lead cilinders a lot. How do you make these
With a simple 2 piece mold
What size wire did you use on the lips?
1mm
Ciao dove hai comprato la fresa del Dremel? Che modello è?
What kind of wire do you use on the body for your loops?
Stainless steel wire
Seeing as you have a dremel, why not use it to cut a groove for your through wire to sit in? It makes for a nice, snug fit and you dont need to make all those fiddly spacers! That's how I do my two-part baits. Fantastic overall result though. Great work!
Sure i could have done that and i have in the past, i just wanted to try something different this time around.
Beetle B that’s exactly what I was thinking! A lot of extra work same result
@@SolarfallBaits I like it! Probably stronger and more balanced!
Very Impressive!
Beautiful bait. I have made a few deep divers. some worked and some did not. I don't know enough about the physics to understand why. I sometimes have an issue with the bait wanting to dive, but not wobble - it does this porposing thing, bobbing up and down, but not side to side. do you have any thoughts what I am missing in my understanding? Tried moving the line tie up and down the lip. Thanks.
How do you keep your wood from splitting when making the weight hole? I tried with a drill when making a simple lipless bait and ended up splitting part of the nose off. Also what kind of wood?
It really helps if you use quality drill Brad point drill bits, fostner bits will work nicely as well. To be honest I don't recall what type of wood this was, it came from wood palette so it could be anything.
@@SolarfallBaits thanks, will look into some proper drill bits, quicker than dremeling out the hole to a specific diameter, save the dremel for shaping and carving :)
Have you tried ultra thin super glue and baking soda instead of bondo to fill the lead holes?
Yeah i have and dont really like that method myself.
Great job thanks for the info. you selling any baits currently?
They look amazing! D'ont you have a bandsaw? I think you will like having one.
I dont have one yet, but it will be my next big purchase.
What is the red stuff you mix into the bondo?
Excelerator
@@SolarfallBaits Thanks for the reply. Your paint-jobs are amazing. They inspire me. Though, I should probably figure out how to make my lures have a proper action first... lol
Nice video! That carving knife with a red handle you use looks very mutch as a classic Morakniv. Is it maybee a tool you brought from Soumi? Greetings from Stockholm!
Yeah i brought it from Finland with me. I Bought that knife from a country fair 20 years ago and its precious to me.
Do you make lipless and topwater?
Also do you sale the baits?
Bruce Beechler
@@AnotherGuyFishing i sometimes sell my baits you might see me making on the channel. I have a website but its on pause now since i dont have time for making batches right now
@@SolarfallBaits ok if ya ever do again id really like some square bills and lipless..
Wher i buy this mesh to paint ?
Craft stores near you might have it
Hi. love the finish on your lures. Can you tell me which epoxy do you use to finish them off
I mention the brand in the video.
One of my favorite album from Immortal 🤘🤘
💪🤘
Hi there brother
Ur work is always awesome
1 question can this kind of bait hold in trolling
i dont see why not
What size wire are you using there?
1.0mm
What kind of wire do you do for your baits?
Stainless steel piano wire. On these the thickness was 10mm
Good job...👍
I Will make for you how simple make crankbait...Verry simple...ok👍👍
So beautiful.
Hmmmmm, do I see some PCR and genetics literature... Hahahaha awesome crankbait too🤘
Nicely spotted 😁
Immortal! Make a bait with a corpse paint paint job
Love videos from you. Could you share the "biggest secret" what are you using for cleaning brush after applying epoxy? or is it a new brush after each bait? :)
I keep them in a jar of acetone.
WHAT WOOD TO USE TO MAKE THE crankbait???
I mention it in the video. Yellow buckeye
@@SolarfallBaits Good , yehaaaa!!
精致的艺术品！太棒了
How is the name of epoxy clear coat.
Any protective layer you put on anything can be referred as a clear coat, even if its epoxy
What's the name of epoxy can you tell me .
I mention it in the video, true coat epoxy
What size wire do you use?
10mm
@@SolarfallBaits thanks Brother your a god at making baits impressive
Genio!!!!👏👏👏🎣🐟🐟🐟
its beautiful
how to do out a trout bait use wood ?
I'm sorry i dont quite understand what your asking here.
Type of wood?
I've been waiting for this
Yes me too
Como posicionar corretamente a barbela
Fantastic skills, which make it look way too easy =)
One question: what is the magical brush you use for Epoxy coating, or how do you treat it after coating to keep it soft and bendable?
Its just a normal paint brush that you can buy from home debot.
Cool. If the eye on the nose was adjustable, that would be even more a killer.
Excelent broo!
Could You upload the patern of these lure?
sorry thats a negative
🤣 try it out from scratch 🤷🏻♂️
Moi moi! Stunning work as always, what airpressure do u run on your compressor when u do these kind of color pattern?
//Kim Mäki
I change it depending on the paint i use. I usually keep it around 2 bar
One day you will have to make something shitty so I don’t say the same thing every time. Great work Mikko! Nice action on that one.
No baits on eBay! FB link does not work.
Link to the fb has been fixed it should work now. Unfortunately i dont have these baits for sale at the moment
Artista!!
😀Finalmente Achei um brasileiro!!
beautiful
Thanks for the detailed video. Learning a lot watching your builds. It is clear to me that I’ve got lots of room to improve.
By the way, I listened to SolarFall. At first, really was digging it, but that vocalist.... I’m sorry, not my cup of tea. Instrumentally, they’re amazing.
Also, it's super easy to drill through your hand when you free hold small work pieces. Invest in a drill press :) you deserve one.
I have one.
Pefect disind
❤❤❤
Go by Feel, Thats your TradeMark
👍👍 Terve.
You need a online store that hav PayPal so I can start ordering. Make that happen and you’ll be getting purchases from