Great thinking by the dump driver at 7:13. Those trucks get really rear heavy when they are loaded. Adding liquid ballast to the front tire should really help the handling!!
Nice. The video was clear and put together well. Nothing like hearing the whine of hydaulics all day. Nice cab footage just boys playing with toys. Thank you.
Very tight operator no excessive moves, didn't even lift his bucket too high when tipping, I doubt if his wheels did a complete revolution from start to finish of loading. Excellent video, loved the 'in cab' shots - shows someone who has never been lucky enough to drive one of those superb machines just what the operator can see.
This wouldn't happen to be the same hand that was runnin a 993 in an older video loadin off the the belt in I think it was around Vegas somewhere? If not this outfit has a batch of top notch loader hands!!!!! Well done fellas!!!!
Benjamin Beytekin I want to work where you are working. I am currently working in Vietnam coal mine. My current income is 700 usd. I want to have better income!
These are such an awkward & unstable machine, congrats to the operator. I just watched the 93k, so more sure footed, well proportioned & operator friendly.
K machines junk and why is that ? Nwcwr have an issue with them it's like driving a caddie there bud all the same motors lifts and hydrolics just note options my 986k keeps up just fine with our 992 believe it or not but it's twice as fast
If I had to buy one, I would buy a rebuilt G over a K any day. The 93's are horrible to work on as well as the 94's. The 92G is the best machine ever made. The 92G has a 3508, the 92K has a C32. K models aren't as bad as wa800 and 900 komatsu's though. Now those are garbage.
I find both our 2K & 3k loaders are jerky pricks to run. Our old 2G is probably the smoothest loader I have ever run. It is just seamless. The only problem with the 2G is they will break the cast mono boom in half. The one thing I truly dont agree with you is about the Komatsus. Our 800-2 is one of the most reliable loaders our place has ever owned.
Turbo Turtle if it had bias instead of radial tired it would be a lot more stable, we have tired like that on one of the 988’s at our site and they suck as far as stability
@@franksilvia3402 I was thinking the same thing. Machine needs hydraulic fluid. When a machine is running perfect. Those pumps don't whine. Sometimes you can get a slight Sssssss as the fluid goes through the valves. Good observation. IUOE Local 15 (ret 38 yrs)
They use Volvos exclusively on some jobs with a smaller loader. Might be entry is too narrow for the 777s. No idea, just a guess but the ones I saw were all new as far as paint.
Foster Schutt so the way it works along with the gas and brake pedal you have what is called an impeller clutch that you use with your left foot, basically it adjusts the rimpull or power the goes to the wheels for the first 2 inches or so of pedal movement, and as you press further it applies the brake and that’s when you shift while using throttle lock
el operador del camión no puede hacer eso de bajarse del camión al momento que el cargador esta cargando por temas de seguridad y el operador del cargador debe de parar el carguio al ver esto
Pablo Hernan Rodriguez Ortiz I want to work where you are working. I am currently working in Vietnam coal mine. My current income is 700 usd. I want to have better income!
Good ol caterpillar 992g I operated same model as well as 992c cat loader for couple of mining companies in wa mines Australia 🌏🦘 plus cat D11 R ,T D10 R,T DOZERS ETC MISS IT 15 YRS + 2 YRS SUB CONTRACTING IN MINES AROUND AUSTRALIA 🌏 CAT 16G , H GRADERS ARE BEST IN MY OPINION 16M CAT Grader good like technology wise & fuel , maintenance but give me any day the old school CATERPILLAR EQUIPMENT & ANY MACK TRUCK OLD SCHOOL RIGS IF IT AINT A CAT 💪OR A MACK 💪YOU MIGHT AS WELL TAKE IT BACK 🤣🤣🤣
Авто/Мото
Impressive machine & operator handling, Superb photography!
James Campbell I agree :D
Great thinking by the dump driver at 7:13. Those trucks get really rear heavy when they are loaded. Adding liquid ballast to the front tire should really help the handling!!
Nice. The video was clear and put together well. Nothing like hearing the whine of hydaulics all day. Nice cab footage just boys playing with toys. Thank you.
Scruffy 61 that is what I also think of about the hydraulic making noise. Thanks for the observation. You are a good coach.
Very tight operator no excessive moves, didn't even lift his bucket too high when tipping, I doubt if his wheels did a complete revolution from start to finish of loading. Excellent video, loved the 'in cab' shots - shows someone who has never been lucky enough to drive one of those superb machines just what the operator can see.
should be paid by the load
he's good
Don Tommaso. .. If he was the firm would be giving him a very large 'pay-packet' each week. That driver was literally worth his weight in gold.
Ñ
That's a great place to train as an operator...
Great video...
Cool! really enjoyed the video
Great operator
Great rebuild, shout out to the maintenance team- fantastic piece of iron
Superman 68 nothing better than a caterpillar...
Art of perfection More please!!
Great video
Nice footage of the wheel loader, loading dirt on the trucks.
I love this work
8/10 Great operator
This wouldn't happen to be the same hand that was runnin a 993 in an older video loadin off the the belt in I think it was around Vegas somewhere? If not this outfit has a batch of top notch loader hands!!!!! Well done fellas!!!!
Jared Brown حصان
Good work
This project is really close to me as I am in Chula Vista.
I like this video 🙏👍🏻😁😁😁
I love heavy equipment
Until you operate it
Cool homie
Nice loading
Must be great to load granular material!
This is a great material for making concrete.
Good morning 🎉🎉 semangat pagi
Que bacana essas imagens da cabine da pá carregadeira em movimento carregando caminhões toca daí operador like daqui
El operador del camión no tiene k bajarse nunca Cuando lo están cargando, detiene la operación de cargador y pone En riesgo su propia vida
Hay que echar una meada de vez en cuando
Mono Boom Sweetness
10:14 1st truck that gets square to the pile. Much quicker load time.
Is that a CAT certified rebuilt or by Peed itself? Nice shots!
Benjamin Beytekin I want to work where you are working. I am currently working in Vietnam coal mine. My current income is 700 usd. I want to have better income!
@@kevinan7323 r
@@kevinan7323 3
Одно удовольствие так ПГС кидать ...
The right front rag tire on the 992 could use a little air ?
These are such an awkward & unstable machine, congrats to the operator.
I just watched the 93k, so more sure footed, well proportioned & operator friendly.
992G is the best machine to ever come off the assembly line, any of the k machines are junk.
K machines junk and why is that ? Nwcwr have an issue with them it's like driving a caddie there bud all the same motors lifts and hydrolics just note options my 986k keeps up just fine with our 992 believe it or not but it's twice as fast
If I had to buy one, I would buy a rebuilt G over a K any day. The 93's are horrible to work on as well as the 94's. The 92G is the best machine ever made. The 92G has a 3508, the 92K has a C32. K models aren't as bad as wa800 and 900 komatsu's though. Now those are garbage.
I find both our 2K & 3k loaders are jerky pricks to run. Our old 2G is probably the smoothest loader I have ever run. It is just seamless. The only problem with the 2G is they will break the cast mono boom in half. The one thing I truly dont agree with you is about the Komatsus. Our 800-2 is one of the most reliable loaders our place has ever owned.
Turbo Turtle if it had bias instead of radial tired it would be a lot more stable, we have tired like that on one of the 988’s at our site and they suck as far as stability
It looks like the smaller trucks could just go home on this job. Maybe they are unloading where it is softer ground though.
Listen to the oil returning when he lowers the bucket to dig, too cool. In cab sounds like a lot of hydraulic pump noise, or is it just the recording?
Doug Bawden to be honest as a heavy equipment mechanic, the pumps don't sound good. Almost like it's low on hydraulic fluid.
Frank Silvia
You are right, they are noisy
@@franksilvia3402 I was thinking the same thing. Machine needs hydraulic fluid. When a machine is running perfect. Those pumps don't whine. Sometimes you can get a slight Sssssss as the fluid goes through the valves. Good observation. IUOE Local 15 (ret 38 yrs)
Trance, don't you dump two loads to one on the outside. Who do you work for I am in northeastern az.
I work for cat. Help building those vehicles. In Decatur Illinois.
The guy taking a leak threw him off.... lol
E muito legal
Niec
Surprised to see a Volvo adt show up
They use Volvos exclusively on some jobs with a smaller loader. Might be entry is too narrow for the 777s. No idea, just a guess but the ones I saw were all new as far as paint.
That haul truck driver endangered his life.
Caterpillar machines rule the earth 🌍
👍👍
JCB jcb I want to work where you are working. I am currently working in Vietnam coal mine. My current income is 700 usd. I want to have better income!
Ce bruit de grognement voudrais vite m'énerver ! NP
What was wrong with that Hitachi in the background?
Bagus sekali
I'll stay with my 988f
U need to show scrapers building stocks piles cant get my guys in AZ to build them right with 623 and 627. Lol over build ur edges
Where is located this mines pls anyone inform me
Anybody else notice the haul truck driver getting out to take a piss under his truck at 7:12? Lolz...
What's the name of the company in your films?
Close Enough Construction.
🥰🥰🥰🥰🥰🥰
❤
Throttle lock makes the hydraulics work a lot faster.
Combien de mètres cubes le godet et le camion ?
60 mètres cubico
www.cat.com/en_US/products/new/equipment/off-highway-trucks/off-highway-trucks/18265926.html
7:07 I'm going to throw the water
air in front tires please
This guy is good. I just wonder why hes not runnin it with the throttle lock on???
56pw Yep, I think he would be a lot faster with the throttle lock engaged.
How does the throttle lock work when he puts it in drive? Does he control the speed the loader moves with his foot rather than the RPM's?
Foster Schutt so the way it works along with the gas and brake pedal you have what is called an impeller clutch that you use with your left foot, basically it adjusts the rimpull or power the goes to the wheels for the first 2 inches or so of pedal movement, and as you press further it applies the brake and that’s when you shift while using throttle lock
New paint, old loader.
I want to work where you are working. I am currently working in Vietnam coal mine. My current income is 700 usd. I want to have better income!
تعلمت على الكاتربلر 922الى80 الكات جيدجدأ لاكن الفولفو ..ل او اف 180شيءممتاز
I need job wheel lodr
I'm not the smartest but I hear a lot of air witch causes cavitation in pumps maybe I'm wrong just my 2 cents
Or maybe water in the circuit
I need job at wheel Loader
Aamirrashid196@gmail.com
Boanoite gosto demaqina
el operador del camión no puede hacer eso de bajarse del camión al momento que el cargador esta cargando por temas de seguridad y el operador del cargador debe de parar el carguio al ver esto
Pablo Hernan Rodriguez Ortiz I want to work where you are working. I am currently working in Vietnam coal mine. My current income is 700 usd. I want to have better income!
Несущая главная стрела одна. Обячно две стрелы подъемные.
Небрежно с высоты водила в самосвале аж подпрыгивает.
one arm instead of two? That looks awfully dangerous...
Nice piss pad by the 777 operator...
وحش التحميل 92 G
Not very smooth
Operator is very slow
Where destroying the earth with these machines
Malo el operador el cargador es para sacarle probecho y no andarse paseando
Does he not know how to work the throttle lock. The machine operates alot better when u lock the throttle
کاتر پیلر بایک بازو قشنگ نیست دوبازو قشنگه وقدرت مند
Good ol caterpillar 992g I operated same model as well as 992c cat loader for couple of mining companies in wa mines Australia 🌏🦘 plus cat D11 R ,T D10 R,T DOZERS ETC MISS IT 15 YRS + 2 YRS SUB CONTRACTING IN MINES AROUND AUSTRALIA 🌏 CAT 16G , H GRADERS ARE BEST IN MY OPINION 16M CAT Grader good like technology wise & fuel , maintenance but give me any day the old school CATERPILLAR EQUIPMENT & ANY MACK TRUCK OLD SCHOOL RIGS IF IT AINT A CAT 💪OR A MACK 💪YOU MIGHT AS WELL TAKE IT BACK 🤣🤣🤣