BRAVO! Congrats! It seems you guys are a family business and i know how it feels to get a new machine! Once again congrats and may all go well for you and your family with health and prosperity 🙂
Just think of all of the people who are involved with this huge machine.......From the Cat employees who assembled it, their suppliers, support organizations, the customer and all of the people who they represent, but most of all the people who benefit from the work accomplished by these huge machines.......Serious business and good luck to all.
Kennecott Copper took down a mountain in the Bingham Canyon district, extracted millions of tons of copper which pretty much wired up the national power grid. Now we need four times as much copper to upgrade our national grid. Thats what these huge machines are good for.
Good running wheel loader ran one for two years but I don’t think anything beats those 980h I have plenty of time in both but I’d take a 980h or H anyday over the 982m
Brian, Congratulations on your fantastic new machine, I know you’re very proud of all the work that went into getting it. We took delivery of a new (way smaller) brand spanking new loader recently ... when the low loader comes around the corner with the new machine it’s like every Christmas morning all at once. Use it and make a dollar, it’ll be the old machine soon and your kids grown up! 👍👍👍👍
What was the bucket capacity on that one? I currently run a 980m loading our primary crusher, would love it if the boss got me something a bit bigger, I tested a 982m with the 8.5yrd bucket for 40 hours and loved it!
We just bought a new 336 man the new cat stuff is really nice loaders especially👍 good to see the kids enjoying it that’s bout how it is around here when we get something new 🤣
@@Chemical442 Man I know all the new grade control stuff is really awesome we lay a lot of water main and storm sewer and it’s the berries, I got a three shank ripper bucket on it right now digg’n threw bout 3’ of slate at bottom of the ditch and man it just rips it up like who dun it💪 thanks for the holler back man god bless and best of luck this season👊
@@burtbrooks7731 What state are you in with 3’ of Shale? I bet that’s awesome to see those shanks ripping through that! Hope you rake the earnings in this season. Appreciate your comments.
@@Chemical442 southern Indiana almost exactly half way between Indianapolis and Louisville, yeah it’s awesome to feel the power of it just ripping thru that slate💪 it’s kind of weird how the ground is here, 1 county west and it’s sugar sand and water table bout 4’ down then go east 1 county and it’s rock lol, keeps us on our toes no doubt 👍
The first thing I thought was this is a RC vid, until the fella in the background walked across. Dear Santa, if I can have one of these for Xmas, I’ll never ask for that nunn with dirty abbits again. Promis.
Dang i work at a salt mine and we use a CAT 966 and we feeding salt anywhere from 400 tons per hour to 800 tons per hour depending on the operator with just a 5 ton bucket
I’ve ran both, but cut my teeth on joystick, the joystick is faster and easier in almost all cases IMO, but driving down the highway is the only place a steering wheel is easier.
This machine holds 141 gallons of fuel, 9 gallons of engine oil, 49 gallons of gear oil for the front diff, 45 for the rear and 87 gallons of hydraulic oil.
That’s literally what it is. The 88g,h,k are basically a new design (compared to the 88b) and decided to give the old 88b dimensions to the 86. At least that’s what cat told me when I took delivery of an 88k and we had an old 88b sitting next to it.
Just curious, what's the average wage for an operator running that machine? Here in the NL the starting salary is about 2700 Euro/month and then you pay taxes and shit off of this one.
May not be as bad as you think! Check with your local CAT dealer for details. When you figure that this two-pass machine can fill up a 48-53’ semi dump in just two passes versus a 980 at 3-4 passes at todays fuel pricing, plus getting the line of semis off to the scales faster allowing for more trucks to load out each day, the return on investment starts to show real quick!
May not be as bad as you think! Check with your local CAT dealer for details. When you figure that this two-pass machine can fill up a 48-53’ semi dump in just two passes versus a 980 at 3-4 passes at todays fuel pricing, plus getting the line of semis off to the scales faster allowing for more trucks to load out each day, the return on investment starts to show real quick!
Actually, the polar opposite. Cycle times will go down by almost 50%. With this being a two-pass loader, it can get almost twice as many trucks loaded up and off to the pay scales. In the height of loading season, sometimes they have to turn away trucks towards the end of the day because there wasn’t enough time to load all the trucks that showed up that day. With this machine, trucks leave in 2 passes versus 3-4. More trucks means more sellable material leaves each day. More material means more revenue. More revenue means the opposite of no raises. Return on investment will be swift.
May not be as bad as you think! Check with your local CAT dealer for details. When you figure that this two-pass machine can fill up a 48-53’ semi dump in just two passes versus a 980 at 3-4 passes at todays fuel pricing, plus getting the line of semi’s off to the scales faster allowing for more trucks to load out each day, the return on investment starts to show real quick!
That’s a pretty cheap, blanketed statement. What size model? What conditions? What applications? Same size buckets? There’s not even a Komatsu between the WA500 and WA600 to compare to the 986 that we are taking about here. It’s easy to throw a broad statement out there based on what your coworkers friend said about a machine he ran once at some job he got through the hall. Come at me with specifics and data.
Авто/Мото
*Very nice machine! CAT power!* 💪👌
W😮 ec
😎❤️
BRAVO! Congrats! It seems you guys are a family business and i know how it feels to get a new machine! Once again congrats and may all go well for you and your family with health and prosperity 🙂
Just think of all of the people who are involved with this huge machine.......From the Cat employees who assembled it, their suppliers, support organizations, the customer and all of the people who they represent, but most of all the people who benefit from the work accomplished by these huge machines.......Serious business and good luck to all.
قل😊😊😊😊
Kennecott Copper took down a mountain in the Bingham Canyon district, extracted millions of tons of copper which pretty much wired up the national power grid. Now we need four times as much copper to upgrade our national grid. Thats what these huge machines are good for.
What a fantastic new Toy . Looking in from Ireland 🇮🇪
Love the sound of the Jake Brake as the truck enters the site....
Ддддддддддддддддддддддддддд5м
👌🏼👌🏼👌🏼❤️💪🏼
I just noticed the clouds looked amazing
Good luck you guys!!
Love those lights,nice looking tractor,hauling it.Greetings,from U.K.
Thanks for uploading!
💪💪💪💓💓💓👌👍
Awesome machine! Nice purchase.
Very nice machine! CAT power!💪👌👍😁
Beautiful machine!
You can tell that was Hauled In Illinois. That’s the Only Way you could Haul a 986 on 8 Axles. Sharp Machine Congrats!l
Correct. You know your stuff.
Brilliant video thank you
In the early 1990’s I worked at Keen Transport in Decatur IL and helped shipped my fair share of Cat products 😊😊
I run a 982M and it's a beast of a machine. 1 scoop each truck/trailer box for the most part in Washington state. The power is incredible
Where in WA?
@@laundrieshanging9077 in granite falls area.
@@randonsoderstrom3647 Do you know Rob Shwartz? Worked in that area about 4 years ago. Good friend of mine.
Good running wheel loader ran one for two years but I don’t think anything beats those 980h I have plenty of time in both but I’d take a 980h or H anyday over the 982m
I på
Brian,
Congratulations on your fantastic new machine, I know you’re very proud of all the work that went into getting it.
We took delivery of a new (way smaller) brand spanking new loader recently ... when the low loader comes around the corner with the new machine it’s like every Christmas morning all at once. Use it and make a dollar, it’ll be the old machine soon and your kids grown up! 👍👍👍👍
Hello sir
I need a job I am oprater
@@asifsaqi2323 Still looking? How far are you willing to travel?
@@joegeezly9613 I am also looking for a job. I am also employed and ready to travel Note: I don't speak English very well, but I'm willing to learn
٫فيا
Wow amazing load .
Wow what a present 🎁
Wow mashaa Allah ❤️👌🏼Enjoy the new machine man 💪🏼
Very professional work 👍
What was the bucket capacity on that one? I currently run a 980m loading our primary crusher, would love it if the boss got me something a bit bigger, I tested a 982m with the 8.5yrd bucket for 40 hours and loved it!
thanks for your video
That’s truck is awesome
Wish I had one in my sandbox.
Amazing place and amazing machine
E bruta mesmo viu máquinas pesadas só CAT mesmo Brasil.
We just bought a new 336 man the new cat stuff is really nice loaders especially👍 good to see the kids enjoying it that’s bout how it is around here when we get something new 🤣
I absolutely love the next gen 336. It’s absolutely perfect, and damn good looking too.
@@Chemical442 Man I know all the new grade control stuff is really awesome we lay a lot of water main and storm sewer and it’s the berries, I got a three shank ripper bucket on it right now digg’n threw bout 3’ of slate at bottom of the ditch and man it just rips it up like who dun it💪 thanks for the holler back man god bless and best of luck this season👊
@@burtbrooks7731 What state are you in with 3’ of Shale? I bet that’s awesome to see those shanks ripping through that! Hope you rake the earnings in this season. Appreciate your comments.
@@Chemical442 southern Indiana almost exactly half way between Indianapolis and Louisville, yeah it’s awesome to feel the power of it just ripping thru that slate💪 it’s kind of weird how the ground is here, 1 county west and it’s sugar sand and water table bout 4’ down then go east 1 county and it’s rock lol, keeps us on our toes no doubt 👍
everything CAT just the way its suppose to be! 👏
Amen to that👍👍
@@burtbrooks7731 6
Very Big Machinery CAT and Powerfull
The best ❤❤❤
The first thing I thought was this is a RC vid, until the fella in the background walked across.
Dear Santa, if I can have one of these for Xmas, I’ll never ask for that nunn with dirty abbits again.
Promis.
Great video
Bravo colleagues.
Cool CAT and videos
Regards from Stoparts Ltd
Top está CAT 986k
Que buenos hidráulicos tienen esas maquinas
Have you had any issues with the steering valve in the cab we have 2 on our crusher both have had to be replaced with in 5000 hours
super video..
New cat wheel loader Impressive sir
Parabéns para todos vocês e bom negocio toda e toda sorte do mundo
Wow very big machinery
Looks like cat is going back to double hoist booms, more stability.
where is that place? looks amazing
The Pete 🎵🎵🎵💪💪👍👍
I learned to drive loader on a 986. Feeding wash plant 250 ton an hour lol had to learn fast
Unfortunately I had to drive 1 kilometre to get the 50/140 . Every second bucket so made it slow . If the piles were close can feed like 400 t an hour
Dang i work at a salt mine and we use a CAT 966 and we feeding salt anywhere from 400 tons per hour to 800 tons per hour depending on the operator with just a 5 ton bucket
Ui que lindas esas niñas dios las bedida
Iove
Is that loader that replaced the older 980
Uuuj quetratomula tan bacana que capassidad para trSportar esa Caterpillar que potensia de máquina me gusta esa maquina
Çox ela texnikadı işledmeye deyer
Nice watch, Marathon right?
Sou brasileiro e sou operador de pa carregadeira e meu sonho trabalhar em uma dessas
I dont know whats nicer loader or pete. Both pretty wicked
wow lovely machine is it difficult to operate the joy stick steering compare to the standard one. I never experience to operate with the joystick
I’ve ran both, but cut my teeth on joystick, the joystick is faster and easier in almost all cases IMO, but driving down the highway is the only place a steering wheel is easier.
Called "soft touch" controls and ya its way better. Especially after 8-9 hours of loading rail cars lol
Looks like a lot of loader for that small operation
I want one
This machine holds 141 gallons of fuel, 9 gallons of engine oil, 49 gallons of gear oil for the front diff, 45 for the rear and 87 gallons of hydraulic oil.
Check out the cat 6090 if you want crazy stats
❤❤❤❤❤
Very very similar in size to the Caterpillar 988B from 40-45 years ago
That’s literally what it is. The 88g,h,k are basically a new design (compared to the 88b) and decided to give the old 88b dimensions to the 86. At least that’s what cat told me when I took delivery of an 88k and we had an old 88b sitting next to it.
cool 😎 dieu merci 👍
Brand new? All that dust and dirt just from the delivery trip and being exposed?
Cool shit
did you look the sky?
My favorite shovel
And I have a license from Dubai International
Hola interesante esta maquina para trabajos en cantera me gusta trabajar en ellas .comodas las e operado .mi equipo faborito.
Benar benar sempurna
Woow
Just curious, what's the average wage for an operator running that machine? Here in the NL the starting salary is about 2700 Euro/month and then you pay taxes and shit off of this one.
I’m bringing in 62k a year running loader on a crushing spread that’s before overtime
@@wade239 Thanks for the reply!
Well that’s good lol but the beast just got off the real beast back on its way there
Whats up the the half buckets
He was probably nervous didn't want to spin the wheels on the first bucket on camera. My opinion.
I want to work in Canada, which is a good home for work, and I want to get a job at the work site.
Kick and loader
I’ll take a 980g or 988h any day of the week
WAI 500
I use to run a 988H loading quarry trucks.... pretty bad ass machine!! I'd love to run a 994, just once... just to say I did
At the risk of being inappropriate, what's a machine like that worth?
May not be as bad as you think! Check with your local CAT dealer for details. When you figure that this two-pass machine can fill up a 48-53’ semi dump in just two passes versus a 980 at 3-4 passes at todays fuel pricing, plus getting the line of semis off to the scales faster allowing for more trucks to load out each day, the return on investment starts to show real quick!
Hola que tal soy operador de maquinaria pesada y mi sueño es operar una máquina como está así sea lo último que haga
Hy nice
Nice loader still too small for the dirt hauler i op
How much $?
May not be as bad as you think! Check with your local CAT dealer for details. When you figure that this two-pass machine can fill up a 48-53’ semi dump in just two passes versus a 980 at 3-4 passes at todays fuel pricing, plus getting the line of semis off to the scales faster allowing for more trucks to load out each day, the return on investment starts to show real quick!
anyone notice how beautiful the sky looks at 5:02
Precisar de operador xama eu😎
Je conduit une 988 cat 😉😉😉
So purdy....it would be hard to be the first to put scratches in it.
LOL they were excited to polish up the bucket!
ثبارك ألله
Hello, I am from Tajikistan, I am a forklift driver, can you find a job for me
Видно опыт мало у оператора погрузчика
Just caterpillar
كملللللل
Cómo podia majar una tego12
Sir I want loader operator job
هذه الة صح
Welp, looks like nobody’s gettin a raise for the next five years now.
Actually, the polar opposite. Cycle times will go down by almost 50%. With this being a two-pass loader, it can get almost twice as many trucks loaded up and off to the pay scales. In the height of loading season, sometimes they have to turn away trucks towards the end of the day because there wasn’t enough time to load all the trucks that showed up that day. With this machine, trucks leave in 2 passes versus 3-4. More trucks means more sellable material leaves each day. More material means more revenue. More revenue means the opposite of no raises. Return on investment will be swift.
Nice machine, but I’d take an 88k over that 😎
Get a real operator to operate that, dude scooping half bucket
If I was the owner of that loader I’d sack the operator, no one should be charging the face like he was. Such a shame
It was loose, light, dry material. We were running some tests. No harm at all.
If you operate like that you are inviting all kinds of repairs down the road. Abuse is abuse.....
$$$$$$$$$$$
May not be as bad as you think! Check with your local CAT dealer for details. When you figure that this two-pass machine can fill up a 48-53’ semi dump in just two passes versus a 980 at 3-4 passes at todays fuel pricing, plus getting the line of semi’s off to the scales faster allowing for more trucks to load out each day, the return on investment starts to show real quick!
@@Chemical442 two passes that's insane!
stop the truck in the mud hole,
🚂🚃🚃🚃🚃🚃🚃🚃🚃🚃🚃🚃🚃
If ya know … ya know the Komatsu outworks this unit AND you save a lot more fuel… don’t always follow the I got me a Cat hat crowd folks
That’s a pretty cheap, blanketed statement. What size model? What conditions? What applications? Same size buckets? There’s not even a Komatsu between the WA500 and WA600 to compare to the 986 that we are taking about here. It’s easy to throw a broad statement out there based on what your coworkers friend said about a machine he ran once at some job he got through the hall. Come at me with specifics and data.
👍🙋♂️😊🌈