How to get an external display on your Yaesu FT-991A
HTML-код
- Опубликовано: 4 фев 2024
- Want an external waterfall display for your 991a? Check this out
NooElec sdr dongle amzn.to/42qArNr
Yaesu 991A amzn.to/3HOEA4f
USB switch amzn.to/3w9SAmM
Yaesu 991A CAT cable amzn.to/3UpkNjr
SDR antenna switch amzn.to/485a3d6
SDR Consoles website www.sdr-radio.com/console
RTL SDR install help www.rtl-sdr.com/rtl-sdr-quick...
Another great resource for sdr software
www.rtl-sdr.com/rtl-sdr-quick...
I had no idea Dice Clay was a ham!
Just kidding man. Great job! I’m inspired to experiment with this.
Ohh she got a bone of her own lol. Funny thing is my name is Andrew.
Good luck setting it up. It will change the way you use your radios. I bought one for my father a few years ago and now he tells me he could never go back. No need to touch the radio any more
The other benefit is now you can open up the receive to a wider bandwidth! Great job.
Thank you. I take it you’re local? I’m on Long Island
@@SlowGoose it’s Doug lol.
Bahahaha. One day I’ll remember your call lol. Haven’t heard you on in a while
@@SlowGoose every day for a little at least.
On 40?
Holy Hell - I've never seen a setup like that. I'm jealous. That must have cost you a fortune.. Can you do a video of your full setup?
I appreciate that very much. It’s been a long go getting it to where it is. I’m not sure if you looked but there are a few short videos of the shack. It’s hard to be comprehensive in one video. Too many things and I get side tracked lol. Hope you enjoy the videos.
Ok, so, my 991a, is seen by the RSPdx in uno. I can change frequencies in Uno and my 991a responds. What I'm missing is seeing the waterfall with the signals. All I see in Uno is just regular waterfall but no discernable signals. What am I missing? I see in your video a cable connected to the "Ref In" jack in the back of the SDRPlay. I don't have that. Is that what I need? What cable is it? Thanks.
The line at reference in is the usb cable between the sdr and the computer. If you are not seeing signals on the waterfall you may need to adjust the gain on uno. If that doesn’t work try installing another sdr software and see if the problem continues. If it does try different antenna ports on the sdr and make sure the correct antenna is selected in the program. You may have over driven the front end of the sdr. I had that problem and it was because I had my antenna switch disconnected so the sdr never was blocked from my tx power. Hope this helps. Let me know if you have any other questions
@@SlowGooseand if you have over driven the front end, we have to replace it right?
@@maxasaurus3008 It has protection diodes that usually pop and it stops there. sometimes you can do more damage
I have Both of these SDR Play United!
The sdr play models are some of the best I’ve used so far.
Hello.
Interesting video, but lacking in explanation.
How do you configure with the cat câble?
Omnirig settings?
Connecting the box for PTT switching?
It’s hard to give a complete answer because it will vary for everyone. Depending on what port you have the radio plugged into on your computer Will determine the comport. Once you figure that out you just select your rig from the list.
As far as the ptt line, on the 991a it’s a bit of a pain. Most radios have a dedicated send line or something of that nature. On the 991a you have to get an 8 pin din plug for the remote jack on the back. Then you need a line from pins 2 and 3. One is labeled as tx ground and the other is ground. It will short across when keyed. The cat cable itself can either be the usb or the serial port on the back of the radio. Drivers for the usb can be found on yaesus website and the serial cable (at least in my experience) will either come with drivers or a link to where to download. The antenna switch is just like hooking up a watt meter. Coax passes through and there is an sma jack that runs to the antenna input on the sdr.
Hope this helps. Any more questions feel free to ask.
Awesome video. So basically you connect the FT-991A to your computer and then combine the programs, Omnirig and your SDR program to create what you have. Is that it? Not sure how you are connecting the control of your radio to SDRConsole. I get the connection to the SDRPlay device but the control and video from your radio has me stumped.
Thank you. That’s pretty much it. But don’t forget you also need the sdr itself.
Yes, I have the SDRDuo but still don’t understand how you are controlling the radio.
@@rbc1225I will make a video showing how to set it all up. But omnirig is what talks to the radio. Have you installed the yaesu drivers?
That would be awesome, just a short video of setting Omnirig. When I load Omnirig and start it, all that shows up is 4 com ports, nothing else. I will google some help on it and see if I can work it out. As far as drivers, yes I have the Yaesu drivers, it works fine on my win4yaesu program, but I am interested in yours too.
You'll have insertion loss from the RF switch/ splitter. Why not tap the IF?
Because that won’t mute the input on the sdr. If you tx while the sdr is receiving you will over load the front end of it.
@@SlowGoose You can tap the IF (not RF) internally.
@@AndrewPepper True, I tapped my IF and it's a game changer!
The only question is the camera moved around so dam much do you supply the sick bags for free.. because I couldn't watch it without felling sick
Unfortunately the puke bags are 2 for a dollar.
Will this setup work with the FT-891?
It should. As long as you can connect to a computer via the usb port. The tx ground should be picked up from the tune/linear din plug on the back. Not sure if the pin out on the din plug is the same as the 991 but it will work
Works well at 100w or less on the 991A. Anything more the switch won't handle it. For guys running amps forget it, buy a true SDR rig like a FT-71O that allows an external monitor then your good with added power without worry. If your ok with 100w then your good.
I can run legal limit. You just run it before the amp. It never sees more than 100 watts.
@@SlowGoose makes sense & good to know.
Gibt es eine Anleitung? Habe das Kabel in den USA bestellt, komme aus Deutschland
What cable have you ordered?
AEcreative CAT Schnittstellenkabel
I am trying to get another video together this week. I want to break down everything. Will probably do it in sections.
❤ Top
Is this Windows only?
I believe sdr console will work on windows and mac. That being said, I just checked the downloads page for it and I am only seeing a windows option.
This is a confusing and somewhat annoying video. Just get to the point and show how to hook this stuff up.
A more comprehensive video is in the works. I’m not thrilled with all the movement in this video myself.
This video made my dizzy.
Yeah it was a bit much with all the back and forth. I plan to make another one a bit more refined.