Kenmore HE5 Dryer Not Turning On
HTML-код
- Опубликовано: 10 авг 2022
- Missing info from the Tech Sheet for troubleshooting the HE5 Dryer.
Sorry for the potato quality video. Used my cell phone instead of one of my gopro's.
Came back from vacation, tossed a load of laundry in the dryer, and it wouldn't turn on. Drum light had power, control panel wouldn't power up. Searched around the web, and found the tech sheet and a good explanation thread listed below. Turns out the tech sheet skips over validating the Power Cube and in nearly every instance points the servicer to replace the main circuit board or user interface circuit boards instead. All are in the $300 range. I got a refurb Power Cube on Amazon for around $50 and it's back up and running (link below). The part number for the power cube is WP3407228 (the WP may or may not be necessary).
Tech Sheet: drive.google.com/file/d/1cliA...
Good thread where I found the info about the power cube:
appliantology.org/topic/56924...
Amazon link to refurb power cube:
www.amazon.com/dp/B08Y926NKQ?... Авто/Мото
We have the exact same dryer .like you, .had the belt go out first and then 5 years later the power cube burnt out just as you said ..spot on! Thank you!
That was an awesome video 👍🏻,I did exactly what you said, but I got the part off eBay for 40 bucks since they were out of stock in Amazon. Thanks a lot, you saved me a lot of money and time.
I had the exact same problem with the exact same dyer model. Worked like a charm. Saved me from buying a new dryer. Thank you!
TY.
This is probably exactly what’s wrong with my he5.
The tension on the belts is also to tight. Going to check into that as well while I have it all opened up.
Thanks again. 😊
did the light insider the dryer come on when the panel wasn't working? that's my scenario. another video suggested the thermal fuse but that checks out with the ohm meter.
Thank you for this video! Exact same "no power" problem happened to neighbors unit and repair guy said uneconomical to fix due to needing to replace "main control boards" After watching your video, I replaced the same power board with a 5v 4a power brick i had laying around and unit is back in operation!
Post a crypto address and I'll gladly send you some btc,eth,ada etc as a thank you.
got the same problem but changing out the cube had the same results. do i really have to buy another one again just to see if both mine are duds or if its a different problem
You did help bro thanks
Thanks
I have power with no amp reader do you think I still change that
If you follow the vid and with the 5V cords disconnected you're getting 0V output on the 5V pins, then I'd definitely say replace the power cube.
Im goin try