Many thanks buddy! I went in to local HD garage, but they refused to help me, because they were scared if bad luck have to split all engine apart. So after watching your video I decided to try myself, and success!
Hello friend. Thank you for this excellent video! My question is do I need to drain my engine oil before i proceed with this? Is there going to be engine oils spilling out of that hole while I swap the shift? Please let me know Much appreciated!!
Do I need to drain the oil before replacing it? You just made my day. I broke my shaft off in a fender bender. I'm going to try to find a replacement for my 2003 VRSCA.
I love your videos, - very useful and you are a genius ! But when the shaft is broken so deep - as in my case - I would have been curious about the method how you can set it into neutral... I suffered with it two hours because there was not a millimetre piece I could catch with a plier.. Finally I hit an M11 long socket wrench head onto the snag, so it was possible to screw it forward and get the neutral position...
Very informative video. I'm thinking this might be the issue on my 2012 night rod special. Very hard shifting to neutral. All other gears are shifting fine.
Thank you for the video! Can you describe how to change the front engine mount? I want to change mine just to be sure, but i think there is a very limited amount off space to get the tools in place and would like to get some advise from you.
So helpful ! I’ve subscribed ! I’ve been told the forks will drop or spring ?? And I will have to have case split . My shaft broke off . In 4 th gear . It’s an 03 anniversary silver model . Fast & reliable bike . I hear the market in Europe is strong for these bikes . I’m considering a sale if I can’t fix without splitting case . Does it have to be in neutral ?
I think it's best to put it in neutral. I recently did my shift shaft replacement by following this video guide. Took me 5 hrs to do it because I didn't have all the tools to make the job easier ( lift, level ground) but I did take the time to shift it in neutral by using the method in the video. I didnt want the spring to bounce back into the engine and spend over 1k at a harley dealership.
I have a question. what voltage regulator do you use for your custom night rods? I have a 2017 night rod and apparently I changed out the starter and battery and in a couple of weeks, battery drained. I was told to change out the voltage regulator.
Hello I just picked up a 07 street rod. It was running great , then all of a sudden it’s stuck in gear. Is this the culprit? Anything else it could be?
Здравствуйте! Я тоже владею Harley Davidson Vrod ( vrscse2 yellow-gold) , хотел бы узнать, какие дальнешие работы по тюнингу данной модели вы проводили?
Try to replace the shift Shaft but can't get it into Nuetral. Is there a trick to it? Can you give more details... does it matter if you turn it clockwise or counterclockwise?
I figured it out... need to rock the bike forward, only, not on the back stop...while turning the shaft counterclockwise. At least, that's what worked for me. I also read, on the 1130 forum, that it doesn't matter what gear you're in. Job completed successfully. Thanks, Pat F.
Its really complicated to understand whats happening but put the shift arm to the shaft, slightly tighten its bolt and try to hold with this and push the shaft carefully in. Make sure that the shaft is well lubricated!
Many thanks buddy! I went in to local HD garage, but they refused to help me, because they were scared if bad luck have to split all engine apart. So after watching your video I decided to try myself, and success!
Excellent video as always by the man himself. I will be placing an order for a shift shaft, lower left frame and a 5 gallon gas tank.
Wow, finally someone that actually knows what they are talking about! Great job!
Just got today my lower frame with shaft from you and just found this perfect video to do the install
Bruh, I bought one off you, putting it on now. Got here super quick. Thanks for everything.
Thank You Very Much!
Thank you soo much I'm able to ride my bike again I broke my shift shaft and its been down for a little over a week thank u sooo much 🏍🙏🙏🙌
Hi, where do you get the shaft from?
Thanks brother ordered one from you since all the dealers in the US don't have it!! Arrives tomorrow! Aloha 🤙🏽
Fantastic! Thank You Very Much!
Would a bent shift shaft make for harder/hash shifting?
@@tineiishurrr2455 If the shaft is already bent than its only matter of time when it breaks! Should be replaced immediately!
Hello friend. Thank you for this excellent video! My question is do I need to drain my engine oil before i proceed with this? Is there going to be engine oils spilling out of that hole while I swap the shift? Please let me know
Much appreciated!!
Hi, No need to drain the oil!
You have made a few Copart vrod buyers very happy 😁
Do I need to drain the oil before replacing it? You just made my day. I broke my shaft off in a fender bender. I'm going to try to find a replacement for my 2003 VRSCA.
Hi, No need to drain oil! Here is the best shaft available on the market: www.ebay.com/itm/175288830586
I love your videos, - very useful and you are a genius ! But when the shaft is broken so deep - as in my case - I would have been curious about the method how you can set it into neutral... I suffered with it two hours because there was not a millimetre piece I could catch with a plier.. Finally I hit an M11 long socket wrench head onto the snag, so it was possible to screw it forward and get the neutral position...
Very informative video. I'm thinking this might be the issue on my 2012 night rod special. Very hard shifting to neutral. All other gears are shifting fine.
I Tuoi filmati sono mto istruttivi!
Thank you for the video! Can you describe how to change the front engine mount? I want to change mine just to be sure, but i think there is a very limited amount off space to get the tools in place and would like to get some advise from you.
Thanks! Will do for sure!
So helpful ! I’ve subscribed ! I’ve been told the forks will drop or spring ?? And I will have to have case split . My shaft broke off . In 4 th gear . It’s an 03 anniversary silver model . Fast & reliable bike . I hear the market in Europe is strong for these bikes . I’m considering a sale if I can’t fix without splitting case . Does it have to be in neutral ?
Thanks! I always replace them on Neutral!
Thanks Mate, great Video.
Hi my Vrod is stuck in first gear, can i still try to replace the shift shaft with out being in neutral? Thank you
Go ahead - I cant stop you!
I think it's best to put it in neutral. I recently did my shift shaft replacement by following this video guide. Took me 5 hrs to do it because I didn't have all the tools to make the job easier ( lift, level ground) but I did take the time to shift it in neutral by using the method in the video. I didnt want the spring to bounce back into the engine and spend over 1k at a harley dealership.
I have a question. what voltage regulator do you use for your custom night rods? I have a 2017 night rod and apparently I changed out the starter and battery and in a couple of weeks, battery drained. I was told to change out the voltage regulator.
Hi, I always use original regulator!
MM77 Approved 👍🏼👍🏼
Broke mine Monday in an accident. Thanks for the video. Might get to enjoy bike week now lol.
Informative how to video, thank you!!
Hello I just picked up a 07 street rod. It was running great , then all of a sudden it’s stuck in gear. Is this the culprit? Anything else it could be?
Hi, If the linkage is not stuck than the problem is inside the engine - must open up and take a look!
Здравствуйте! Я тоже владею Harley Davidson Vrod ( vrscse2 yellow-gold) , хотел бы узнать, какие дальнешие работы по тюнингу данной модели вы проводили?
Hi, I have 90+ V-Rods in progress, some of them you can see on my website www.FREDY.ee
Need to drain any fluids to do this shaft?
No!
@@HarleyFredy thank you
How replace gearbox to 6 gears? Is it posible for V-Rod?
Try to replace the shift Shaft but can't get it into Nuetral. Is there a trick to it? Can you give more details... does it matter if you turn it clockwise or counterclockwise?
I figured it out... need to rock the bike forward, only, not on the back stop...while turning the shaft counterclockwise. At least, that's what worked for me. I also read, on the 1130 forum, that it doesn't matter what gear you're in. Job completed successfully. Thanks, Pat F.
Hi, Its shown in Video since 1:18 and you "turn/shake" the shaft both ways as you dont know what gear you are standing at - very easy!
Some vrod owners are having issues with the vrid jumping out of gear after replacing the shaft. Have u had this issue ? Thanks
Hi, I never had issues like that!
@@HarleyFredy We ha also situation like this, we had to remove engine, because of spring which moved inside:(
great video! please make more VRod how to videos, preferable an 03 lol
Thanks! Will do for sure!
Hi. I can't get the shat back in. Been trying few hours
Its really complicated to understand whats happening but put the shift arm to the shaft, slightly tighten its bolt and try to hold with this and push the shaft carefully in. Make sure that the shaft is well lubricated!
Boa informação ,como aplicar um novo veio das mudanças obrigado de Portugal.
Bro please help me 🙏 I have v rod vrsca 2006 model and I have to modify tire from 180 to 240 Will I need to change the swingarm ?
No. Stock swingarm can be used but it needs some modifications.
Thank you for this video
Thanks