*[NEW] UPDATED INSTRUCTIONS HERE 👉 ruclips.net/video/WJX8B04jaDQ/видео.html Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT Epson 522 INK 👉 amzn.to/3S5G6EY Epson Maintenance Box ET 2700 [Must Be Changed After Cleaning] 👉 geni.us/Z9yi Epson Maintenance Box ET 2720, 4700 [Must Be Changed After Cleaning] 👉 geni.us/ezqCcy
Saved my 11-month-old Epson ET-2720 from going to the trash dump. The black ink was completely blocked, and 3 power cleanings and 19 cleanings did not fix it but flushing the black print head with the kit did the trick. Very grateful, especially in terms of saving the printer from going to landfill. Thank you!
the instructions on how to get access to the inside of the printer saved my bacon, some idiot around here (me) apparently dropped a micro usb cable in the paper feed, which I only discovered when I opened it up. The cable has been extracted and the printer is, by some miracle, working great again.
First I cleaned as instructed but after After the Power Cleaning- It works just like Brandon said! Brandon, You are terrific! I'm an old timer and happy I don't have to get a new on or pay hundreds to repair! One thing I didn't realize is that I have to make sure I print often to keep in in good shape!
This video saved my printer (ET-7270)! It was fairly easy but does take persistance. The video doesn't metion it, the instructions do, but you should warm up the solution before using it. Run the print head cleaning program under maintenance several times for it to clear out the solution and print again. I repeated the whole thing twice on 2 colors (yellow and cyan). No new ink refills were needed, and it is printing beautifully again :) I bought the kit off Amazon. It was $25, which was about double the price of the other top searches for similar products, but I went with it because it was the one in the video. Other kits may be just as effective but I didn't want to risk wasting more time on a different product. Thanks again for the very informative free printer support.
Thank you so very much. I watched a different video of yours but couldn't find it. I kept searching until I saw your face because I wanted to donate, but not sure if you're still around. Let me know if you are and I will!! It worked so well. I also wanted to say that my printing job was time-sensitive and I didn't have the hose so I hollowed out a kid's medicine syringe enough that it fit over the little spigots and used alcohol to clear them out. Lifesaver! Thank you! Just found out that my voting registry was not in my married name and I have to have it postmarked by Monday so you are the reason that I'm able to vote this election. :) Appreciate you and your video so much!
Actually, you only need to unscrew the two outer screws. The other 2 screws are for the display panel. Thanks for the pen idea. I used this video for getting paper out that was jammed that I couldn't access using any of the Epson instructions. Thanks so much!
This worked for me. Shipped printer overseas and did not set up for a couple of months. No colors were printing. Video was very helpful -- and commenters too! Package insert is pretty useless. After flushing, I tried printing multiple hex code color blocks in BYMC but that was not enough to start ink again. One Power Cleaning brought the fresh ink through. Thank you for finding this maintenance hack. I write procedures and prepared clear instructions. Where may I send them so you can give them to viewers? BIG MAHALO!!!
Thanks so much, I had an issue where I had a major jam inside the printer and couldn't figure out how to gain access to it. The manual was useless and I couldn't locate anywhere online showing how to open the cover. Your video was so helpful in showing exactly how to remove the four screws. I appreciate it so much!
This does help. The two middle screws are actually for the control panel, so it's not necessary to remove them, just the outer two.The two connector cables from the scanner came out when I opened mine. I managed to remove the side panel and get them back in. Back to printing!
Thank you so much for this video and the product. I did the procedure and it worked very well. This is another reminder to keep the pressure on these companies to give us the ability to maintain this equipment. I bought the EPSON to preserve the environment as best I can. I did have the unfortunate problem of having the little cable come off and give me the dreaded 100016 error code. I found another site that gave me the solution to that problem and I am up and running on all thrusters. Much appreciated. I have subscribed. Good on you, sir.
I am getting that error also. Could you please let me know the site that you found that fixed the problem? I have looked on several sites and cannot find a solution that works.
Many comments. 1. Excellent instructions in the video - very easy to follow. 2. I had to reinstall the scanner cables as those easily cam out of their slots when I opened the top (getting those cables back in was a hassle). 3. I bought the solution (and new ink) and did the flush of the problem spot (magenta) and it cleaned up pretty well as the video described. 4. Got everything set back up and did nozzle check and printer head realignment fine but no improvement. 5. Have since printed numerous pages to get the magenta going again and still nothing but yellow where there should be reds. 6. I have never had to replace ink in this printer as I don't use the printer that often - mainly because the issue with the magenta and the lack of generating the correct color. This printer is a PITA to say the least - I truly hate it. I would greatly appreciate any feedback you can give as to other things to try to get the magenta back on track.
Many thanks for your video Brandon, it has saved my Feb 2020 ET-2720 from going to the dump. It was the cyan this time and 10ml of cleaner and one power clean later, all done. Nothing like as complicated and messy a process as I feared! Can I donate?
This helped a lot. My printer was new so I didn’t need a flush and cleaning but upon opening I found that the motor was missing a screw and hand a screw loose. I was able to fish out the missing one and tightened them back up and it’s working all good again! Thank you I was frustrated trying to find a way to open this.
I was already in the process of unscrewing the two under the display panel and then I watched your video and it gave me more insight on how to disconnect the lines etc. One thing to look out for is when opening the top be careful with white strips that connect to the scanner. I did that I’m that guy but I connected them back successfully,I’m use to iPhones and such. Thank you for the insight again. I have not bought the ink solution but I had a blast messing with the lines and putting it back together. Now I know.
I would tell you a trick just sell the printer and buy the Icolor560 thank me later it would save you a lot of money and your designs would be even better
Your video helped us figure out how to open up the top. Couldn't find those four screws. Had some debris that got into the back and were able to get it out. However, we didn't realize that a couple plastic cables came out on the left when opening it up all the way and got an error code. We figured out how to put it back in luckily and everything is great.
Thank you so much!! I was nervous about taking this on myself but it worked perfectly. I wish I could attach before and after pictures, but my most recent nozzle check was perfect. I have a family full of Epson Eco owners so I know I'll be using your product in the future. I'm not sure if it's because it's a different series, but for my Epson ET-4700 I did not have to unscrew the two inner screws in order to get the printer open. Also, I never EVER leave reviews on RUclips so this is saying a lot! :)
Thanks for a great repair soluton. Just black was ok on my printer. After this fix and 10-12 runs of nozzle cleaning (not power cleaning) all colours works perfect
Was able to clean my print heads with the solution per the video. Thanks for making this video. While cleaning my print heads I accidentally lifted the cover too high and my scanner ribbon cables dislodged. It took me awhile to reconnect them because I could not remove the side panel to see more clearly. I hope that you will do a video on how to remove the side panel on printer in case you accidentally disconnect scanner cables on an ET-2720.
And adults should wash their hands after using the bathroom and I should be a wealthy not rich and we shouldn’t have to work until 67 and we should be able to get all of our SS money we earned and happy meals should have the toys inside without me having to check the box. Should should should.
I lifted the lid a bit too high and it disconnected the scanner ribbon data cables! Real pain to put back if you don’t have tools. My Tech experience helped but I certainly wasn’t trying to make more work for myself. Good cleaning kit you’ve come up with.
Thank you so much ! I will try ! My problem is that my printer prints messy with ink everywhere! Almost like ink bleeding and spot everywhere! Pls make the video about this! I am not mind even to pay for consultation because I print so much for Bussness and this is would be so helpful! Want to thank you for your time , your videos are amazing! You are amazing!
Hi, let me look into this topic a little more and see if I can get you a video next week. No promises, but for now try using the printhead cleaning method and that should solve your problem.
Thanks for this. I did accidentally pull two of those flat cables out when moving the lid back after removing the front screws. It will pop out of the guides if not careful. I needed to remove the left side panel as an extra step and find where the two cables plugged back in. It was easy enough to do once I figured out how, but I did think I bricked my printer when it happened. My cyan was not coming through after the initial cleaning, multiple blue color heavy picture printings or nozzle checks but after 1x power cleaning all of my colors were printing perfect.
Thanks for the video. On my printer (ET2721) only the two outer screws need to be taken out to open the printer. I actually ran into this video looking for a way to open the printer, but it was useful to learn how to clean the print head, will bear in mind!
Got it cleaned on two colors. Also had to get rid of all ink in those two. It did get really scary, because when we tried plugging it back in it did not turn on. I thought I ruined it. Was all ready to go get another one. This morning I tired plugging it in and it worked. Now I can do the power cleaning.
OMG, You saved me. I love my Epson ET-2720. Im so glad you are on line, you are clear and easy to understand. Thank for haring. I was not looking forward to going to a repair shop. I am new follower.🤩
I just ordered a cleaning kit, so waiting for that the next two days. Going to try this method as well as brand new ink that has been highly reccomanded. Hoping it works cause my papers always print with lines on the image and i need this working for school soon!
I came for info on fixing a E-01 error message, paper jam and this video helped me access the inner workings of the machine. Yea, this video was helpful. Oh, there was a small piece of paper off to a corner and I'm hoping that removing it will allow the printer to work.
The yellow stopped printing on my ET2720 even after several print head cleanings. I was going to try your kit but before I did that, I found out if you push the power and the ? HELP button at the same time you can run a 7 minute power cleaning and that fixed the problem! So try that first.
@mrauntyvirus1 you are correct. I ended up having to change the box inside my printer after filling it from the power clean. The best solution has been printing a page of the solid colors sometimes multiple times to clean the heads.
Omg! Thanks for the pen idea! I broke one side that holds the top! And the cables on the right side hand got loose! Boy i was freaking out! But was able to put it back together! Im about to do the flush! Cross fingers it helps! My magenta is completely clogged
Thank you for the video. It got me to order your kit-I probably could find the pieces on my own, but it’s all there and I won’t have to run all over creation to get them! :) We just don’t print often enough to keep the ink flowing, but when we do want to print, it would be nice if we didn’t have to switch to b/w printing when we want color.
I followed all instructions. Before, pages were all blank. Nothing was printing. Cleaning the black went pretty well. Cleaning the 3 colors was not so easy. The plunger was harder to push in. But I finally got each color done. After running the processes many times, I get only black print. No color at all. All ink tanks are full.
I have a question...if the paper doesnt feed right wats the problem? Paper goes in a little then the right corner of paper drops in first then starts jamming paper in while still trying to print. If u got any answers that would help...if not at least i tried.
If you wanna prevent cleaning, print a nozzle check every 3-4 weeks. I have E 2721 and had to clean it sometimes as i forgot to print nozzle checks. Should put it as a permanent reminder on phone calendar.
My ink is full for each color but every time i print , there’s either lines running through out the picture or there’s really small blue dots coming out and it’s not as saturated when i transfer onto my phone case template
Hi there!! Watched the video twice. My problem is the cyan tank will not accept new ink. I’ve bought two refills thinking it was a defective refill and the ink will not go in. Help
Simply run the "Print Head Cleaning" menu option in settings->maintenance. No need to open the machine or use any cleaning liquid. Here is the Epson tech support page: epson.com/faq/SPT_C11CH42201~faq-00007f9-et2720?faq_cat=faq-topFaqs#
I have always had problems with the print heads clogging up on all my EPSON printers. I switched to HP printers and found that the print heads never clog up. My last HP printer worked perfectly for 8 years. Eventually, in the 9th year, the print heads wore out. It was uneconomical to buy a new set of print heads after 9 years, so I bought a brand new HP printer. I've been using it for more than 3 years and again, the print heads never clog up. The big drawback is the ink cartridge cost -- they are about $50.00 each. OUCH!
Great video will order kit. Only Black and Yellow print. Would you suggest printing color every so often to keep heads flowing? Or is the problem the ink gets old.
You only have to remove the two outer screws. The inner screws hold the panel to the top and it is not necessary to remove them to get access to the printhead.
I am working on it, it did not unclogged on first try. Only had to removed outer 2 screws, Did not jammed paper on printer, used white wheel on bottom left, turned to the left and the printheads slide freely. My yellow is not printing, will try leaving the solution there longer to see what happens. Thank you for the video.
This was a very informative video, but my Epson ET-2720 problem is more difficult. There seems to be some kind of blue fibrous material obstructing the paper feed pathway, and I have no idea how to get at it for removal or if it is supposed to have a function but became dislodged. In any case, I cannot get any paper to feed through.
@@BestPrinters It turns out I'm still on the two-year extended warranty that I purchased separately. Normally I don't bother paying for such things, but for a refurbished item it seemed like a good idea at the time. So..... off to MicroCenter today.
When you say i need fresh ink in the printer how do i get the old ink out of the tank? I also have the 2620 is the process the same for that? Im rather frustrated as i have only had these printer for around 6 months and neither one of them will print 😢one i use for sublimation and the other for every day printing. Thanks for this video it looks to be rather simple. I will order your cleaning kit when i learn how to purge the ink tank
Question: I haven’t bought the kit yet but I am probably going to soon. My problem is that the tubes leading into the print heads seem like at least 2 are empty. Is this a problem that lies before the print heads? Or does it pull ink via vacuum and cleaning the heads will resolve the issue with the inkless tubes?
i started out using this printer for sublimation. I no longer needed it for that as i puirchased a new printer. I didnt want to just throw this one away so i drained all the sublimation ink out of it and put the regular ink in it, going to just use it for a regular printer now. When i got it filled back up with ink and started printing, it printed a few pages but i think it was just the ink that was left in the lines....then it just started printing blank pages...no color, no black, no lines, nothing! i did nozzle checks, cleanings etc but still nothing...even on the nozzle check print page where it asks if there is missing spots, there is nothing at all printed on the sheet....is the printer trashed or do you have any suggestions on what i might could try
No really all you need to do is clean the printhead it's gotten clogged because of the mixture of the two different inks. You can also do deplaning and power cleanings until the ink is back 100%. Also make sure that your ink is totally full when you're doing the deep cleanings or power cleanings.
Hi, l watched the video it helped me to open 4 screws and cleaned the area. I have a problem with paper keep jamming at back side. and I pulled it from the back. Do you have a video to solve this. Thanks
Question, i have this issue with this exact printer. but i used sublimation ink. epson did not want to fix it because i used sublimation ink. Will this cleaning solution help my printer?
Do you have any videos showing how the wireless works on your laptop? I realize many different products have different setups. I have the exact model .. Thank you, God Bless
Thanks. I have a ET-2720 that had a paper jam at the head and I could not figure out how to open the top to get in there. Mine only took 2 screws to get it loose and open.
Ok, So I printed and no color comes out. Each time I did a nozzle check less than less color came out until they’re is no color printing. I actually removed the color cartridges that I used to push in solution and they are empty inside which means that the clog is not on its way to the paper. The clog is from where the ink is stored to the cartridges. Meaning the long hose that goes from tanks to cartridges. So how do I unclog that? I regularly use black ink which is why thar is not an issue.
I followed these instructions and, unfortunately, have disconnected one of the small ribbon connectors at the left side of the scanner assembly. I don’t see where to reconnect or re-insert this cable. I obviously have a scanner error on the display when I power it back on. Any directions for me? Otherwise, this is the 2nd Epson EcoTank that will be thrown in my garbage.
Do you have any suggestions as to how to open up the back? I have got some tissue paper jammed and I can see it but I can’t reach in to remove it. Thanks
I think Epson, since they took the hit on not being able to make money off of ink cartridges are wanting to make it just a bit extra hard to maintain a printer. These things go for $200 to $300 a pop and if they can make $ off servicing them or selling a new one simply b/c the waste ink cartridge is full or a print head is clogged, that stands to defray some of the money they used to make off of expensive cartridges. I am glad to see things are changing in the printer industry though; for many years the printer itself was mostly a money machine for the manufacturers to sell the cartridges. The only reason I own one of these though is because I do sublimation; I have a monochrome laser (toner based) printer that I use for all my day-to-day printing. I bought it and enough toner to print 3500 pages for about $130. On the rare occasions I need to print in color I just go to the public library or FedEx-- although the price of full color laser/toner-based printers are getting down to where they make sense for the casual home user. Thanks for this video; I fixed my ET-2720 and had it back up and running in less than 2 hours, and that was with allowing it to stay open for 45 mins. to make sure everything was perfectly dry. Thanks SOOOOO much!
I have ink and all tanks are full. It is old as i have not used it.(Maybe 2 years old but full) It will not print, is this fix doable with said ink? My printer does not even print that sheet for the test that you did? I am frustrated it never worked ever. Had it for 3 years plus.
I did all the steps and pushed in 20ML solution in Magenta but the Magenta tank is still full and not sure how to empty it to put in new Magenta ink that’s not mixed with solution. I’m confused.
I am not quite sure I got that right: I do have to replace the affected color tank NO MATTER WHAT after this procedure? Even if it is still full? My yellow won't print anymore and the normal nozzle cleaning doesn't do the trick
I Charged the ET 2720 before putting the ink, how do I reset it to factory setting to start over. I tried unplugging and waiting for a few second and restarting but nothing. thanks any help would be welcome.
Not sure what I did wrong, but I followed your instructions and now it is printing absolutely nothing. Not a trace of ink on the paper! I did accidentally knock out two of those flat, paper-thin cables, but I swear I stuck them back in place properly... The printer is running and everything okay, but no ink, even after a couple head cleanings and printing a lot of test prints. Not to mention my printer won't connect to my WiFi... what a mess.
![How To Unclog - Clean Epson ET 4850, 4750 - Printing Blank Pages [FIXED]](/img/1.gif)
*[NEW] UPDATED INSTRUCTIONS HERE 👉 ruclips.net/video/WJX8B04jaDQ/видео.html
Printer Cleaning Kit - Get Yours Now & SAVE $! [CLICK THIS LINK] 👉 geni.us/wArXsZT
Epson 522 INK 👉 amzn.to/3S5G6EY
Epson Maintenance Box ET 2700 [Must Be Changed After Cleaning] 👉 geni.us/Z9yi
Epson Maintenance Box ET 2720, 4700 [Must Be Changed After Cleaning] 👉 geni.us/ezqCcy
Saved my 11-month-old Epson ET-2720 from going to the trash dump. The black ink was completely blocked, and 3 power cleanings and 19 cleanings did not fix it but flushing the black print head with the kit did the trick. Very grateful, especially in terms of saving the printer from going to landfill. Thank you!
Awesome! The cleaning kit saved the day again! geni.us/wArXsZT
I have a question.. I 😅am unable to even print a print report. Should I proceed with cleaning all 5 ink boxes?
I used mine for only one pepper 😅😅
Thank you for a straight forward instruction. I am 78 yrs old and my grandson will be proud of his grandmother for doing this.😏
I am proud of you!
the instructions on how to get access to the inside of the printer saved my bacon, some idiot around here (me) apparently dropped a micro usb cable in the paper feed, which I only discovered when I opened it up. The cable has been extracted and the printer is, by some miracle, working great again.
First I cleaned as instructed but after After the Power Cleaning- It works just like Brandon said! Brandon, You are terrific! I'm an old timer and happy I don't have to get a new on or pay hundreds to repair! One thing I didn't realize is that I have to make sure I print often to keep in in good shape!
That is awesome! Keep up the good work!
This video saved my printer (ET-7270)! It was fairly easy but does take persistance. The video doesn't metion it, the instructions do, but you should warm up the solution before using it. Run the print head cleaning program under maintenance several times for it to clear out the solution and print again. I repeated the whole thing twice on 2 colors (yellow and cyan). No new ink refills were needed, and it is printing beautifully again :) I bought the kit off Amazon. It was $25, which was about double the price of the other top searches for similar products, but I went with it because it was the one in the video. Other kits may be just as effective but I didn't want to risk wasting more time on a different product. Thanks again for the very informative free printer support.
Happy to help! Consider subscribing to my channel and leaving a 5 star review on Amazon. Thank you for your feedback to your fellow viewers.
Thank you so very much. I watched a different video of yours but couldn't find it. I kept searching until I saw your face because I wanted to donate, but not sure if you're still around. Let me know if you are and I will!! It worked so well. I also wanted to say that my printing job was time-sensitive and I didn't have the hose so I hollowed out a kid's medicine syringe enough that it fit over the little spigots and used alcohol to clear them out. Lifesaver! Thank you! Just found out that my voting registry was not in my married name and I have to have it postmarked by Monday so you are the reason that I'm able to vote this election. :) Appreciate you and your video so much!
Actually, you only need to unscrew the two outer screws. The other 2 screws are for the display panel. Thanks for the pen idea. I used this video for getting paper out that was jammed that I couldn't access using any of the Epson instructions. Thanks so much!
I am glad it worked out for you!
This worked for me. Shipped printer overseas and did not set up for a couple of months. No colors were printing. Video was very helpful -- and commenters too! Package insert is pretty useless.
After flushing, I tried printing multiple hex code color blocks in BYMC but that was not enough to start ink again. One Power Cleaning brought the fresh ink through. Thank you for finding this maintenance hack. I write procedures and prepared clear instructions. Where may I send them so you can give them to viewers?
BIG MAHALO!!!
Thanks for the support! Mahalo!
Thanks so much, I had an issue where I had a major jam inside the printer and couldn't figure out how to gain access to it. The manual was useless and I couldn't locate anywhere online showing how to open the cover. Your video was so helpful in showing exactly how to remove the four screws. I appreciate it so much!
I'm glad to hear it! Consider subscribing to Best Printers Channel.
This does help. The two middle screws are actually for the control panel, so it's not necessary to remove them, just the outer two.The two connector cables from the scanner came out when I opened mine. I managed to remove the side panel and get them back in. Back to printing!
thats what happen to me and what a nightmare.
My scanner says error now 😅
Very true, u only need to remove the first 2 screws he took off to get in
Thank you so much for this video and the product. I did the procedure and it worked very well. This is another reminder to keep the pressure on these companies to give us the ability to maintain this equipment. I bought the EPSON to preserve the environment as best I can. I did have the unfortunate problem of having the little cable come off and give me the dreaded 100016 error code. I found another site that gave me the solution to that problem and I am up and running on all thrusters. Much appreciated. I have subscribed. Good on you, sir.
Awesome! Glad to hear that!
I am getting that error also. Could you please let me know the site that you found that fixed the problem? I have looked on several sites and cannot find a solution that works.
Many comments. 1. Excellent instructions in the video - very easy to follow. 2. I had to reinstall the scanner cables as those easily cam out of their slots when I opened the top (getting those cables back in was a hassle). 3. I bought the solution (and new ink) and did the flush of the problem spot (magenta) and it cleaned up pretty well as the video described. 4. Got everything set back up and did nozzle check and printer head realignment fine but no improvement. 5. Have since printed numerous pages to get the magenta going again and still nothing but yellow where there should be reds. 6. I have never had to replace ink in this printer as I don't use the printer that often - mainly because the issue with the magenta and the lack of generating the correct color. This printer is a PITA to say the least - I truly hate it.
I would greatly appreciate any feedback you can give as to other things to try to get the magenta back on track.
After using the kit you should run a power cleaning. That will get the Magenta pushed back into the system.
Many thanks for your video Brandon, it has saved my Feb 2020 ET-2720 from going to the dump. It was the cyan this time and 10ml of cleaner and one power clean later, all done. Nothing like as complicated and messy a process as I feared! Can I donate?
Perfect! Glad to hear this!
This helped a lot. My printer was new so I didn’t need a flush and cleaning but upon opening I found that the motor was missing a screw and hand a screw loose. I was able to fish out the missing one and tightened them back up and it’s working all good again! Thank you I was frustrated trying to find a way to open this.
I'm happy to help. Consider subscribing to my channel!
I was already in the process of unscrewing the two under the display panel and then I watched your video and it gave me more insight on how to disconnect the lines etc. One thing to look out for is when opening the top be careful with white strips that connect to the scanner. I did that I’m that guy but I connected them back successfully,I’m use to iPhones and such. Thank you for the insight again. I have not bought the ink solution but I had a blast messing with the lines and putting it back together. Now I know.
I purchased your kit and I’m trying this today, let’s see how it goes, hopefully I can fix the problem 🙏
Good.
watching this makes me hate my printer even more. I've used it only a few times and the ink won't print. I should not have to do this. argh
Same here so frustrating!
Same
Use the printer regularly, and you won't have this problem. Let it rest for weeks and months, the ink will clog up.
I would tell you a trick just sell the printer and buy the Icolor560 thank me later it would save you a lot of money and your designs would be even better
@@stighaaland5357 i used this printer every other day for 1.5 years and it's been nothing but problems since day one...
Your video helped us figure out how to open up the top. Couldn't find those four screws. Had some debris that got into the back and were able to get it out. However, we didn't realize that a couple plastic cables came out on the left when opening it up all the way and got an error code. We figured out how to put it back in luckily and everything is great.
Ok good!
Thank you so much!! I was nervous about taking this on myself but it worked perfectly. I wish I could attach before and after pictures, but my most recent nozzle check was perfect. I have a family full of Epson Eco owners so I know I'll be using your product in the future.
I'm not sure if it's because it's a different series, but for my Epson ET-4700 I did not have to unscrew the two inner screws in order to get the printer open.
Also, I never EVER leave reviews on RUclips so this is saying a lot! :)
Adriana thank you for the comment, I am glad you were able to fix your printer!
Thanks for a great repair soluton. Just black was ok on my printer. After this fix and 10-12 runs of nozzle cleaning (not power cleaning) all colours works perfect
Perfect!
Was able to clean my print heads with the solution per the video. Thanks for making this video.
While cleaning my print heads I accidentally lifted the cover too high and my scanner ribbon cables dislodged. It took me awhile to reconnect them because I could not remove the side panel to see more clearly. I hope that you will do a video on how to remove the side panel on printer in case you accidentally disconnect scanner cables on an ET-2720.
You shouldn't have to that it should work for the price you pay for it to begin with .
And adults should wash their hands after using the bathroom and I should be a wealthy not rich and we shouldn’t have to work until 67 and we should be able to get all of our SS money we earned and happy meals should have the toys inside without me having to check the box. Should should should.
Use the printer regularly, and you won't have this problem. Let it rest for weeks and months, the ink will clog up.
You are great. I over filled my black ink tank and now I cannot tell when the ink is low. Is there a way to clean the tank
Seen multiple videos but this one is the only one that was super helpful
Great!
You explained every thing right, I just hope I can do it myself. Now all I got to di is order the Cleaning Kit.
yes
I lifted the lid a bit too high and it disconnected the scanner ribbon data cables! Real pain to put back if you don’t have tools. My Tech experience helped but I certainly wasn’t trying to make more work for myself. Good cleaning kit you’ve come up with.
Sorry that happened, thank you the kit was revamped recently so you should have much more in this kit vs the one in the past.
Worked like a dream! The Power Cleaning at the end makes it work so don't forget to do it
Perfect!
Thank you so much ! I will try ! My problem is that my printer prints messy with ink everywhere! Almost like ink bleeding and spot everywhere! Pls make the video about this! I am not mind even to pay for consultation because I print so much for Bussness and this is would be so helpful!
Want to thank you for your time , your videos are amazing! You are amazing!
Hi, let me look into this topic a little more and see if I can get you a video next week. No promises, but for now try using the printhead cleaning method and that should solve your problem.
Thanks for this. I did accidentally pull two of those flat cables out when moving the lid back after removing the front screws. It will pop out of the guides if not careful. I needed to remove the left side panel as an extra step and find where the two cables plugged back in. It was easy enough to do once I figured out how, but I did think I bricked my printer when it happened. My cyan was not coming through after the initial cleaning, multiple blue color heavy picture printings or nozzle checks but after 1x power cleaning all of my colors were printing perfect.
Great job, I am glad you were able to get back all your colors.
Thanks for the video. On my printer (ET2721) only the two outer screws need to be taken out to open the printer. I actually ran into this video looking for a way to open the printer, but it was useful to learn how to clean the print head, will bear in mind!
I am glad this video was helpful. Thanks for watching and make sure to subscribe!
Got it cleaned on two colors. Also had to get rid of all ink in those two. It did get really scary, because when we tried plugging it back in it did not turn on. I thought I ruined it. Was all ready to go get another one. This morning I tired plugging it in and it worked. Now I can do the power cleaning.
Great!
Having issues..this helped allot going to order and try it as I homeschool and do allot of printing..appreciate it GOD BLESS YOU
You are so welcome!
OMG, You saved me. I love my Epson ET-2720. Im so glad you are on line, you are clear and easy to understand. Thank for haring. I was not looking forward to going to a repair shop. I am new follower.🤩
Glad I could help!
Worked like a charm after the flush and running a power clean, you saved my printer thanks!
Great to hear!
This video and this comment saved my printer!! Thank you 💚💚💚💚💚
I just ordered a cleaning kit, so waiting for that the next two days. Going to try this method as well as brand new ink that has been highly reccomanded. Hoping it works cause my papers always print with lines on the image and i need this working for school soon!
Great!
Right to repair is SO important. Thanks for the video!
Amen
I came for info on fixing a E-01 error message, paper jam and this video helped me access the inner workings of the machine. Yea, this video was helpful.
Oh, there was a small piece of paper off to a corner and I'm hoping that removing it will allow the printer to work.
Awesome!
The yellow stopped printing on my ET2720 even after several print head cleanings. I was going to try your kit but before I did that, I found out if you push the power and the ? HELP button at the same time you can run a 7 minute power cleaning and that fixed the problem! So try that first.
Great!
Worked for me as well!!!!
Don't do a power clean! It will fill your waste tank to fast and when that's full, your printer will stop working!
@mrauntyvirus1 you are correct. I ended up having to change the box inside my printer after filling it from the power clean. The best solution has been printing a page of the solid colors sometimes multiple times to clean the heads.
Omg! Thanks for the pen idea! I broke one side that holds the top! And the cables on the right side hand got loose! Boy i was freaking out! But was able to put it back together! Im about to do the flush! Cross fingers it helps! My magenta is completely clogged
Hope it all works out.
Thank you for the video. It got me to order your kit-I probably could find the pieces on my own, but it’s all there and I won’t have to run all over creation to get them! :)
We just don’t print often enough to keep the ink flowing, but when we do want to print, it would be nice if we didn’t have to switch to b/w printing when we want color.
Thank you for the support! Yeah sorry I wish there was an easier way.
Just did it with my ET-3710. Works fine.
Great!
Great video, I will try to fix my printer issue... Thank you for sharing it 🤛
Thanks for watching!
Thank you this was a great video and it worked. Do I have to run a power clean or prime the cartridge after flushing?
Yes run a power cleaning, that will push the ink back into the printhead.
My kit arrives tomorrow hoping it works
How did it go? (please respond in separate comment for quick response)
I followed all instructions. Before, pages were all blank. Nothing was printing. Cleaning the black went pretty well. Cleaning the 3 colors was not so easy. The plunger was harder to push in. But I finally got each color done. After running the processes many times, I get only black print. No color at all. All ink tanks are full.
Same problem I have.
Repeat the cleaning and make sure to run a power cleaning after.
Best Printer's Cleaning Kit: geni.us/wArXsZT
I have a question...if the paper doesnt feed right wats the problem? Paper goes in a little then the right corner of paper drops in first then starts jamming paper in while still trying to print. If u got any answers that would help...if not at least i tried.
will this also clean clogged sublimation ink?
How do you unclog the lines? Some of the see through tanks are empty 🤷
Do you have a video explaining how to refill this damn thing after the first use? I can't get ink to flow into the tanks!
If you wanna prevent cleaning, print a nozzle check every 3-4 weeks.
I have E 2721 and had to clean it sometimes as i forgot to print nozzle checks. Should put it as a permanent reminder on phone calendar.
My ink is full for each color but every time i print , there’s either lines running through out the picture or there’s really small blue dots coming out and it’s not as saturated when i transfer onto my phone case template
Thanks, couldn't work how to get into the darned thing to clear a paper jam. Your video solved it for me, so thanks
I'm so happy to hear that. Consider leaving subscribing to Best Printers Channel!
Hi there!! Watched the video twice. My problem is the cyan tank will not accept new ink. I’ve bought two refills thinking it was a defective refill and the ink will not go in. Help
Try clearing the cyan tube connected to the printhead.
You can also pull out the white ink cartridges and put your cleaning solution directly on the nozzles over the print head
Simply run the "Print Head Cleaning" menu option in settings->maintenance. No need to open the machine or use any cleaning liquid. Here is the Epson tech support page: epson.com/faq/SPT_C11CH42201~faq-00007f9-et2720?faq_cat=faq-topFaqs#
@@mmungara Except that does not always work.
I have always had problems with the print heads clogging up on all my EPSON printers. I switched to HP printers and found that the print heads never clog up. My last HP printer worked perfectly for 8 years. Eventually, in the 9th year, the print heads wore out. It was uneconomical to buy a new set of print heads after 9 years, so I bought a brand new HP printer. I've been using it for more than 3 years and again, the print heads never clog up. The big drawback is the ink cartridge cost -- they are about $50.00 each. OUCH!
Yep. I'm about to go back to HP. I hated buying the printer ink but I never had an issue with it.
If the white sponge block under the 4 black prongs is full of ink, can that effect your printer?
Is this still the right video for Epson 2720? I just got solution.
Yes
I ordered the kit!
Yes!
Great video will order kit. Only Black and Yellow print. Would you suggest printing color every so often to keep heads flowing? Or is the problem the ink gets old.
Yes if you print color often you will avoid this problem.
Thank you very much for making this video and sharing the knowledge!!
Youre Welcome!
i have the ET-2760 printer. WHERE CAN I GET the (free/no code) adjustment program to reset the wic?
Try eBay
You only have to remove the two outer screws. The inner screws hold the panel to the top and it is not necessary to remove them to get access to the printhead.
Thanks!
I am working on it, it did not unclogged on first try. Only had to removed outer 2 screws, Did not jammed paper on printer, used white wheel on bottom left, turned to the left and the printheads slide freely. My yellow is not printing, will try leaving the solution there longer to see what happens. Thank you for the video.
Awesome! Thank you for sharing!
Thank you man for saving my printer. Your video is much appreciated!
You are welcome!
You are so amazing! I’m so thankful you make videos like this!!
Thank you!
Thanks. You saved me from buying a new printer 🙌🏾🙌🏾👍🏾❤️
Perfect!
This worked for me. I had to use it several times before the color was back.
This was a very informative video, but my Epson ET-2720 problem is more difficult. There seems to be some kind of blue fibrous material obstructing the paper feed pathway, and I have no idea how to get at it for removal or if it is supposed to have a function but became dislodged. In any case, I cannot get any paper to feed through.
Hmm, maybe getting help from a certified technician might be the answer.
@@BestPrinters It turns out I'm still on the two-year extended warranty that I purchased separately. Normally I don't bother paying for such things, but for a refurbished item it seemed like a good idea at the time. So..... off to MicroCenter today.
When you say i need fresh ink in the printer how do i get the old ink out of the tank? I also have the 2620 is the process the same for that? Im rather frustrated as i have only had these printer for around 6 months and neither one of them will print 😢one i use for sublimation and the other for every day printing. Thanks for this video it looks to be rather simple. I will order your cleaning kit when i learn how to purge the ink tank
Hi, so all you need to do is just make sure the ink tanks are full, the old ink is ok. You dont need to remove the old ink.
excellent video Easy to follow Very clear directions thank you
You are welcome!
Thank you so much for this video and product. Just saved my blocked printer from the dump :)
Nice!
Question: I haven’t bought the kit yet but I am probably going to soon. My problem is that the tubes leading into the print heads seem like at least 2 are empty. Is this a problem that lies before the print heads? Or does it pull ink via vacuum and cleaning the heads will resolve the issue with the inkless tubes?
Yes, you guessed correct.
nice one bro thank you very much.
Hi, in my printer Y, M and C don't print. After the clean with product do I Need to change the color even if my tanks are full? Thanks💪
Hi, if your tanks are full no need to change the ink. Just make sure they are topped off. Also make sure to run a power cleaning after using the kit.
Hi, my Epson eco tank cyanine and magenta are clogged, so I required two cleaning kits
? or one would be sufficient
One kit should be enough, just 50 ml on each color.
i started out using this printer for sublimation. I no longer needed it for that as i puirchased a new printer. I didnt want to just throw this one away so i drained all the sublimation ink out of it and put the regular ink in it, going to just use it for a regular printer now. When i got it filled back up with ink and started printing, it printed a few pages but i think it was just the ink that was left in the lines....then it just started printing blank pages...no color, no black, no lines, nothing! i did nozzle checks, cleanings etc but still nothing...even on the nozzle check print page where it asks if there is missing spots, there is nothing at all printed on the sheet....is the printer trashed or do you have any suggestions on what i might could try
No really all you need to do is clean the printhead it's gotten clogged because of the mixture of the two different inks. You can also do deplaning and power cleanings until the ink is back 100%. Also make sure that your ink is totally full when you're doing the deep cleanings or power cleanings.
Hi, l watched the video it helped me to open 4 screws and cleaned the area. I have a problem with paper keep jamming at back side. and I pulled it from the back. Do you have a video to solve this. Thanks
I have the same problem on top of the ink problem. I plan to get the kit and clean the ink part but is there a way to correct the paper jamming?
me 2, epson king of the paper jams.
Thanks for sharing
Thanks for watching!
So need to know will this work on the ET 16650 as well?..
Absolutely.
How do you clean the eco tank 2720 tank windows to be able to see ink level?
You cant from the inside.
Great explanation! Brilliant help at a time I needed it the most. Thank you.
Great to hear!
Question, i have this issue with this exact printer. but i used sublimation ink. epson did not want to fix it because i used sublimation ink. Will this cleaning solution help my printer?
Yes it will.
Do you have any videos showing how the wireless works on your laptop? I realize many different products have different setups. I have the exact model .. Thank you, God Bless
Hi Brandon, how could I set up a fresh ink install?, cuz it's almost full of the clogged color, I'm lost. Thank you for your help!
I figured out, but your suggestion is empty out the tank and then refill it with the new ink?
Hi, when you do a power cleaning it will drain some ink and that is the ink you will need to replace.
Hi! Would the cleaning solution will be stuck in the cartridge?
No it will be flushed by the power cleaning!
Thanks. I have a ET-2720 that had a paper jam at the head and I could not figure out how to open the top to get in there. Mine only took 2 screws to get it loose and open.
Thanks for sharing!
Ok,
So I printed and no color comes out. Each time I did a nozzle check less than less color came out until they’re is no color printing. I actually removed the color cartridges that I used to push in solution and they are empty inside which means that the clog is not on its way to the paper. The clog is from where the ink is stored to the cartridges. Meaning the long hose that goes from tanks to cartridges. So how do I unclog that?
I regularly use black ink which is why thar is not an issue.
Try running a power cleaning.
I followed these instructions and, unfortunately, have disconnected one of the small ribbon connectors at the left side of the scanner assembly. I don’t see where to reconnect or re-insert this cable. I obviously have a scanner error on the display when I power it back on.
Any directions for me? Otherwise, this is the 2nd Epson EcoTank that will be thrown in my garbage.
Find a picture online of the connections and replicate what you see.
Do you have any suggestions as to how to open up the back? I have got some tissue paper jammed and I can see it but I can’t reach in to remove it. Thanks
Try some extendable tweezers or pliers. You dont want to take much apart back there.
@@BestPrinters thanks, that’s what we did and it is all good now..
My Eco Tank printer still printing colors but all words are flurry, double lines. Do you have any solutions? Thanks
Yes the instructions in this video will help.
I think Epson, since they took the hit on not being able to make money off of ink cartridges are wanting to make it just a bit extra hard to maintain a printer. These things go for $200 to $300 a pop and if they can make $ off servicing them or selling a new one simply b/c the waste ink cartridge is full or a print head is clogged, that stands to defray some of the money they used to make off of expensive cartridges. I am glad to see things are changing in the printer industry though; for many years the printer itself was mostly a money machine for the manufacturers to sell the cartridges. The only reason I own one of these though is because I do sublimation; I have a monochrome laser (toner based) printer that I use for all my day-to-day printing. I bought it and enough toner to print 3500 pages for about $130. On the rare occasions I need to print in color I just go to the public library or FedEx-- although the price of full color laser/toner-based printers are getting down to where they make sense for the casual home user. Thanks for this video; I fixed my ET-2720 and had it back up and running in less than 2 hours, and that was with allowing it to stay open for 45 mins. to make sure everything was perfectly dry. Thanks SOOOOO much!
Awesome, yes good work on letting it dry that is a very important step!
Perfect size for my desk, able to print from my phone and computer. Super easy set up.
I don't see where you empty the ink tank and replace it as you stated in the beginning of the video. Did I miss something?
No you dont need to empty the ink tank, you need to empty the printhead.
I have ink and all tanks are full. It is old as i have not used it.(Maybe 2 years old but full) It will not print, is this fix doable with said ink? My printer does not even print that sheet for the test that you did? I am frustrated it never worked ever. Had it for 3 years plus.
Can this process will be the same for Epson ET-2710?
Yes
So can I just clean the print heads like that? All my ink is full from my last fill, its just the print heads.
Yes
I did all the steps and pushed in 20ML solution in Magenta but the Magenta tank is still full and not sure how to empty it to put in new Magenta ink that’s not mixed with solution. I’m confused.
Run a power cleaning after using the solution. That will flush everything out.
What if I get no printing at all ?
Hello, will this work for the Epson ET-15000 to clean out the regular Epson ink and add sublimation ink?
Yes
I am not quite sure I got that right: I do have to replace the affected color tank NO MATTER WHAT after this procedure? Even if it is still full? My yellow won't print anymore and the normal nozzle cleaning doesn't do the trick
As long as you are half way full you should be ok. Totally full to be extra safe.
@@BestPrinters thank you!
I Charged the ET 2720 before putting the ink, how do I reset it to factory setting to start over. I tried unplugging and waiting for a few second and restarting but nothing. thanks any help would be welcome.
Sorry I wasn’t able to get to your message. Please create a new comment with the same question if you still need a response. Thank you!
Not sure what I did wrong, but I followed your instructions and now it is printing absolutely nothing. Not a trace of ink on the paper! I did accidentally knock out two of those flat, paper-thin cables, but I swear I stuck them back in place properly... The printer is running and everything okay, but no ink, even after a couple head cleanings and printing a lot of test prints. Not to mention my printer won't connect to my WiFi... what a mess.
wow
@@BestPrinters I guess that's really all that can be said in this situation... 🤷♂ oh well